Browser-based interface give error

hi
we have installed database server and application server on separate systems. MIS users/clients access the application by browser based interface. now, application server and database server are working properly. but when we wana access the application via browser the all the time there is an error that "the page cannot be displayed". anybody plz tell me to resolve this problem.
thanks

error while accessing browser based interface and both are in incorrect forum.

Similar Messages

Prob with browser-based interface

hi
we have installed database server and application server on separate systems. MIS users/clients access the application by browser based interface. now, application server and database server are working properly. but when we wana access the application via browser the all the time there is an error that "the page cannot be displayed". anybody plz tell me to resolve this problem.
thanks

This sounds like the web server itself is down. I.e. the server platform is up and running, but the Apache web service is not running.
No idea what your environment consists of, but the typical way to start Oracle's Apache application server is
a) logon as the oracle o/s user on the web/application server platform
b) run the opmnctl (located at ORACLE_HOME/opmn/bin/opmnctl) to start the web server daemon
Note that this is a public forum staffed by volunteers. If you have a critical "system down" problem, you would be better served by filing a SR (Service Request) directly with Oracle Support via Metalink.

Browser-based interface an fedora core 4

Al intentar ir a la pagina de inicio de la Base de Datos aparece el error:
la conexion ha sido rechazada mientras se inetntaba contactar con 127.0.0.1:8080

error while accessing browser based interface and both are in incorrect forum.

When trying to save interface ,gives error

Hi ,
When i am trying to save it gives error below.
Interface has following errors.Interafce can't be generated or executed.
Do you want o save anyway.
Critical Staging Area The staging area of this interface is defined on the target but has a logical schema different from the target datastore.
Redards,
srini

Hi,
you are using different schema for your target tables. i mean you are creating target datastore different from where your sources located.
suppose that you have staging and target schema. you have to create your tables in staging if sources are located at staging area.
if you want to use target schema, you have to configure one more logical schema at topology tab.
and select new logical schema when you are establishing your new interface at overview tab.
i hope this helps.
www.odilibrary.com
Ugur MIHCI

Installing the Enterprise Manager 10g (Browser-based) Console

i've installed the oracle 10g client and am successfully running the OEM 10g java interface. however, when i try to start the web browser-based interface, i get a "page cannot be displayed" error. the URL shown is <the name of the machine: >/em
Are any special procedures required for installing the Enterprise Manager 10g (Browser-based) Console???

There seems to be some confusion with what you are installing. Your original question was how do you install the DBConsole for 10g. When you install a 10g database, you get the option of either installing a database console or point to a Grid Control. If you need to reinstall the database console for some reason, you use the emca utility.
From your last note, it seems u don't have any Oracle database running on ur server...

Using FMS v4.5.5 with a browser-based audio player running on iPad/iPhone

Hello,
I’m seeking some clarity/guidance on using FMS v4.5.5 (Streaming Edition) with a browser-based audio player running on iPad/iPhone (i.e. under iOS).
Background
I have a Microsoft Windows 2008 R2 Web Server running IIS v7.5 and supporting a website built using ASP.NET and C#. Parts of the website allow a visitor to play a selection of audio clips from our bespoke MP3 library. Due to UK music licencing constraints, we must stream the clip to the client browser – we must not download either part or all of the source MP3 file(s). We therefore had a custom audio player built for us some time ago using Flash/AS3. This has and continues to work very well, and uses RTMP to stream the clips from FMS to the client browser.
As our site has become more established the number of visitors has steadily grown. In the early days the number of visitors from the iOS platform was relatively small but, last month, it had risen to 40%! As Flash is not supported on the iOS platform, this growing group of visitors are unable to fully maximise the benefits offered by the website, which I am now trying to address.
What I’m Trying To Do…
From what I’ve researched and read, I believe that FMS v4.5.5 supports HLS and I need to use this (instead of RTMP) over HTTP between FMS and the iOS Safari client. I have been experimenting with an Open Source player (JPlayer) and a commercial player (JWplayer) and appear to have these playing a MP3 file as a “progressive download” (I think that’s the right term) as all I’m doing is specifying the file path (no HTTP prefix etc.), i.e. the audio is not really being streamed as I require. Unfortunately, I’ve not found / worked out how to configure my FMS to respond to a path request along the lines of:
http://www.myserver.com/live/audio1.mp3
Hopefully someone reading this who is much more expert on FMS, HLS, HDS, HTML5, etc. than me can point me in the right direction!
What I’m confused about…
1) Can all my MP3 assets stay as is and still be streamed to the iOS Safari client? To the best of my knowledge, the key properties of my MP3 files are CBR, 44,100Hz, 320Kbps.
2) If not, can they be converted on-the-fly by FMS or do I need to create additional audio assets to support HLS etc.?
3) If I have to manually create additional audio assets, how do I do that (I’ve seen references to tools from both Adobe and Apple but not actually found the kits)?
4) Some of the Adobe documentation I’ve read implies that FMS support for HLS etc. is only available when FMS is used in conjunction with the bundled Apache web server. As stated earlier, my entire site runs on IIS so does that mean to achieve what I want I’ll have to run two web servers on my physical server – IIS for the website itself and Apache for RTMP/HLS/etc.?
5) What changes do I need to make to my current FMS configuration to get HLS to work? I’m sure someone has been here already and can enlighten me with their experience and hopefully point me to some straight forward documentation to follow!
6) Lastly, and really part of (5), once I’ve got FMS configured correctly, what would be the typical path to a given MP3 audio file that I would give the iOS Safari browser to make this all work.
I appreciate this is rather a lengthy first post but hopefully the background puts my questions (and confusion!) in context. Bottom line is… I simply want to be able to stream audio clips only (no video) to iOS Safari browsers from FMS v4.5.5 running on a Win2K8R2 platform with IIS v7.5, and with no audio content being stored (even temporarily) on the iOS platform.
My thanks and appreciation in advance to anyone who can help me achieve this.
Steve Barker
Business IT Solutions

Hi Apurva,
Thank you for your reply. Unfortunately I am not much further forward, despite having read more Adobe documentation (FMS v4.5 Configuration and Administration Guide, FMS v4.5 Developer’s Guide) and trying different configuration options.
First to confirm a point you made when answering point 4 yesterday. Yes, in my current RTMP scenario I have several MP3 assets (let’s call them Audio1.mp3, Audio2.mp3, Audio3.mp3, etc.) that are made available to a bespoke Flash/AS3 player via the LIVE application. I understand that as I purchased the Streaming Edition of FMS v4.5, a Flash-based player is restricted to using the LIVE application. You go on to say that I “publish” these assets to the LIVE application. I set this up a while back but do not recall having to “publish” anything. All I recall doing was to ensure that all the assets (the .mp3 files) were in a single folder and that the folder was identified by the <Streams> tag in the following file (example shown):
Flash Media Server 4.5\applications\live\Application.xml
                <StreamManager>
                                <VirtualDirectory>
                                                <Streams>/;C:\MP3Library</Streams>
                                </VirtualDirectory>
                </StreamManager>
To the best of my knowledge, I didn’t have to do anything else to make the current solution work. Having read more of the documentation I am still none the wiser as to what I need to do (step-by-step) to “publish” my converted MP3 assets (see next paragraph) to the LIVEPKGR application. Please could you explain these steps to me by way of an example.
WRT your answer to point 1 yesterday, I wish to clarify the exact output I need to create when converting my MP3 assets. Am I expected to produce a Audio1.aac file, or a Audio1.mp4, file, or a Audio1.m4a file, etc.? Or am I meant to be using ffmpeg (either directly or indirectly) with a much more sophisticated command line that somehow generates stream-rated info/files as well? An example of how you would use ffmpeg to convert one of my MP3 assets would be very much appreciated.
Lastly, the coexistence of IIS and Apache (ref your answer to point 2 yesterday). That all made sense but given all the testing/changes I’ve been making I thought it wise to start afresh! So I completely removed FMS from my dev server and re-installed Flash Media Streaming Server v4.5.5 with the bundled Apache v2.2 server. When presented with the dialogue “Would you like for Apache to listen on port 80. If not FMS will be using port 80 instead.” I answered NO. When presented with the dialogue regarding FMS server ports, I entered 1935 NOT 1935,80 (should I have done that as the preamble makes reference to HTTP webserver proxy and HTTP Dynamic Streaming origin services?). I then modified the Application.xml file as described above.
To test the new set-up, I did the following. First, the test environment…
DEV Server
Windows Web Server 2008 R2 SP1
IIS v7.5
ASP.NET v4.0
Flash Media Streaming Server v4.5.5
Apache v2.2
IE v9.0
Adobe Flash Player 11 ActiveX v11.5.502.146
TEST Client
Apple iMac (Intel)
Mac OS X v10.6.8
Safari v5.1.7
Adobe Flash Player 11 Plug-in v11.5.502.146
On DEV Server… launched IE and loaded the home page of my website, which has two elements on it – one to load/run our bespoke Flash player, the other to run JPlayer (configured to use HTTP). I selected our bespoke Flash player and it played a MP3 audio file. I verified this in real-time via the FMS Admin Console on the server.
On TEST Client… entered http://192.168.20.250:8134 into Safari – it comes up with the FMS install completed / test your server page. In the middle of the video display area a black box appears saying “10000 OK” – I clicked OK. I then clicked HDS Single Bitrate – the video plays (Not Using Hardware Acceleration is briefly displayed). There is NO activity logged in the FMS Admin Console back on the DEV server under “live”, “livepkgr” or “vod”. I assume this is because I’ve gone straight to the Apache Server via the port reference – is that correct? Next I tried the HLS Single Bitrate – same results.
The HDS Single Bitrate logs the following in the Apache access_log file:
"GET /hds-vod/sample1_1500kbps.f4v.f4m HTTP/1.1" 304 - "-" "Apple Mac OS X v10.6.8 CoreMedia v1.0.0.10K549"
The HLS Single Bitrate logs this:
"GET /hds-vod/sample1_1500kbps.f4v.f4m HTTP/1.1" 304 - "-" "Apple Mac OS X v10.6.8 CoreMedia v1.0.0.10K549"
"GET /hls-vod/sample1_1500kbps.f4v.m3u8 HTTP/1.1" 304 - "-" "Apple Mac OS X v10.6.8 CoreMedia v1.0.0.10K549"
"GET /hls-vod/sample1_1500kbps.f4v.m3u8 HTTP/1.1" 200 816 "-" "Apple Mac OS X v10.6.8 CoreMedia v1.0.0.10K549"
"GET /hls-vod/sample1_1500kbps.f4vFrag1Num0.ts HTTP/1.1" 200 1143416 "-" "Apple Mac OS X v10.6.8 CoreMedia v1.0.0.10K549"
"GET /hls-vod/sample1_1500kbps.f4vFrag1Num1.ts HTTP/1.1" 200 873072 "-" "Apple Mac OS X v10.6.8 CoreMedia v1.0.0.10K549"
"GET /hls-vod/sample1_1500kbps.f4vFrag2Num2.ts HTTP/1.1" 200 1591984 "-" "Apple Mac OS X v10.6.8 CoreMedia v1.0.0.10K549"
etc…
At this point I’m stuck once again since I’m not clear how to construct the JPlayer HTTP reference. You have suggested:
http://192.168.20.250:8134/hls-live/livepkgr/_definst_/livestream/livestream.m3u8
That produces the following in the Apache error_log file:
[error] [client 192.168.20.4] File does not exist: D:/Program Files/Adobe/Flash Media Server 4.5/webroot/hls-live
If I change the JPlayer HTTP reference to:
http://192.168.20.250:8134/hls-vod/sample1_1500kbps.f4v.m3u8
the audio from the video plays.
Also, if I look in the applications\livepkgr folder structure there is only \events (with sub-folder _definst_ and sub-sub-folder liveevent) – there are no _definst_ , livestream , streams folders etc. So besides me not quite understanding the logic/flow here, I seem to be missing a few folders/files too! I’d be very grateful for any light you can shed on all this. Plus an example of what my HTTP string should ultimately look like; for example:
http://192.168.20.250:8134/hls-live/livepkgr/_definst_/livestream/Audio1.m3u8
Apologies for such a long reply but I’ve been at this for over 10 hours today! I feel I’m getting closer but clearly there are still some gaps and configuration errors.
Thanks again for your time, support, patience and understanding.
Kind Regards, Steve

Thin browser based client for "workflow creation" UI, any suggestions?

Hello, we are building an automation software. We are planning to have a browser based front end. User will create a "workflow" like diagram user our User interface.
What is the best way to do this? If you have used bea weblogic workshop, the process flow diagrams is similar to what we are looking for. Basic idea is to have user generate this entire ddiagram on front end and we pass the resultant flow chart(workflow) as simple xml data to the backend for processing.
Is it possible using applets/pure-html or something similar?? Any already developed components available???
Thanks in advance.

Well I haven't had any luck getting an iPhone to present an SSL certificate to an IIS7 ASP.Net webserver.
The same .p12 certificate works on IE7, PocketIE (WM6), Firefox and Safari (PC version). The website is set to Require an SSL certificate. From the Windows Mobile or PC browsers, you get a prompt for the client certificate. I have tried Nick's website and the iPhone will prompt to choose between his and my certificates, however with IIS7 you just get a 403.7 client SSL certificate required error.
I have turned on SSL tracing in HTTP.Sys and get the following (edited for length) :
<Opcode>SslInititateSslRcvClientCert</Opcode>
- <Keywords>
<Keyword>Flagged on all HTTP events handling ssl interactions</Keyword>
</Keywords>
<Task>HTTP SSL Trace Task</Task>
<Message>Server application is attempting to receive the SSL client certificate, which will be provided if available. If the client certificate is not available, a renegotiation will be initiated.</Message>
<Channel>HTTP Service Channel</Channel>
<Provider>Microsoft-Windows-HttpService</Provider>
... then after various SSL negotiations and receive raw data traces I see...
<Opcode>SslRcvClientCertFailed</Opcode>
- <Keywords>
<Keyword>Flagged on all HTTP events handling ssl interactions</Keyword>
</Keywords>
<Task>HTTP SSL Trace Task</Task>
<Message>Attempt by server application to receive client certificate failed with status: 0xC0000225.</Message>
<Channel>HTTP Service Channel</Channel>
<Provider>Microsoft-Windows-HttpService</Provider>
Which basically seems to mean a "not found" error.
Anyone had any luck with iPhone to IIS 7 (which we have to use as it is an ASP.Net website)?

WRT54G: Browser access interface corruption?

WRT54G V.5: Completed firmware upgrade to v1.02 successfully...but...now when accessing administration interface through browser the interface seems corrupted. There are no Tabs, etc. only some random block graphics, a few populated data fields and so forth. Any idea on how to correct the corruption or the web page read error?

Which browser?
I used both IE7 and Seamonkey.
Did you enable JavaScript (not Java)?
Yes, I enabled Javascript in both browsers on both pcs.
In IE enable the scripterror display in the advanced internet options. For Firefox check the javascript error console for errors.
Since when did you have the problem? Did you try a firmware reflash to fix it?
I have not had any reason to try to access the configuration utility for a few months as everything was working fine but all of a sudden, my win98 machine lost internet. I've tried everything within windows to get the internet to work with no luck. I thought I would check the settings in the router to make sure all is well there, but, like I said, I can't use it because of the web display corruption.
Did you reset the router?
Yes, I have done a reset and have even set the router back to factory defaults via the button on the back and am in the process of setting the router back up. Still have the same problem if I try the web based config though.
I have another problem now, since I reset the router back to factory defaults, I am running the setup wizard from the disk, but it keeps asking me for a password. As I have reset the router, I assume the password is admin but that doesn't work, just hitting enter doesn't work and my old password that I had changed it too previously doesn't work.

BROWSER BASED PI SHEET INPUT FIELDS NOT EDITABLE.

Hi Gurus,
I am working on browser based PI sheet. I am able to generate PI sheet but input fields for Browser based PI sheet are not editable. I can not post my entries in T. Code:CO60.
This is happening to all recipe Groups also.
Please give inputs. Thanks in advance.
Regards,
Pradeep

Hi Dhawal,
I am using process Instruction Type 0 (Universal Type) for Process Instruction Category.
I am using browser based PI sheet. It is getting generated but I am unable to Put information in Input
fields to post data.
When I see error logs I get following Error:
Data transfer to the server: data contains error.
I am not using PI category 7 in master Recipe.
Same settings I am using in another client and it is executing. But for this server I am facing Problem.
Can I have your contact no. so we can discuss in detail.
Pradeep
9820969465
Edited by: PRADEEP on Mar 20, 2009 4:54 PM
Edited by: PRADEEP on Mar 20, 2009 4:56 PM

Browser based InfoPath form deployed on a Claims based Web Application calling a Secure Web Service via Data Connection

hi,
We have a Browser based InfoPath Form deployed on a Claims based Web Application. We are tyring to call WCF Services that are secure using Certificates via the Data Connections on Infopath Form.
Earlier we used to get the Data in BCS External List via the WCF Services and the Data Connections used to get the Data from the BCS External List. Due to Performance Issues, we want to remove the BCS External List and straightaway call the secure WCF Services
via the Data Connections.
Have anyone implemented this scenario.
Thanks
Ram
Thanks Ram

Hi Ram,
As these are browser based InfoPath forms, you have two options
1) Deploy as sandboxed forms
In this case you have to create a secure store application id and then set the credentials for that account.
You then have to export the data connection to Data connections library and modify the .udcx file to utilize the newly created secure store application id.
This may sometime give issues related to sandboxed code service. You have to give permissions on the secure store for the user account which the sandboxed code service is running.
2) Deploy as administrator approved forms
This would be ideal way of doing things as you have full control over the web request if you write code behind InfoPath forms.
3) Deploy as a Hybrid solution
a) Write a full trust proxy solutions (extend SPProxyOperation class and override execute method) and make the web request call inside this and return the response
b) Invoke above operation from the sandboxed InfoPath form's code behind by SPUtility.RegisteredProxyOperation(four part assembly name, operation args)
Hope this helps.
Thanks,
Srikanth

WRT54G V6.0 Web Based Interface Issue

I'm trying to setup a WRT54G. I ran the SetupWizard which didn't work.
I can access the Web Based Interface at 192.168.1.1 , but when it appears (after putting in the admin password), the page doesn't properly load. The colors and some text comes up, but all of the tabs, buttons and links are missing (including the Save Settings button). I can't get to Administration page to restore the factory defaults or upgrade the firmware.
I've tried the pressing the reset button for 30 seconds about 100 times so far, and nothing has worked. I've tried this on 3 different computers, and my other 2 WRT54G's run properly on all of these computers.
I bought the router about 2 years ago and I just opened the box today.
What fixes are available?
Thanks in advance.
Solved!
Go to Solution.

If you are not able to see any Tab on your router setup page, If you have any Firewall or Antivirus installed on your computer you may disable it and then try to Login to your Router Setup page and check if you are able to see any Tabs on Routers GUI. If still not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable.
If you still face the same problem, Connect your other computer to the Router and try to access the router setup page and check if you are able to see any tabs on the router setup page. If stil the same problem on the 2nd computer then you need to Upgrade the firmware of your Router using TFTP tool.
First you need to Download 1.67 MB the Latest Firmware of your router.
TFTP tool which you can Download 44.3 KB (It will be named as BEFW11S4-v2_SetupWizard)
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now Check if you are able to Login to your Routers GUI and able to see the Tabs on it.

Radius authentication for the browser-based webtop

Hiya all,
With help of the radius-authentication module for apache (http://www.freeradius.org/mod_auth_radius/) and web-authentication it is possible to use radius-authentication for the classic-webtop. Has anyone got Radius authentication working for the browser-basedwebtop?
SSGD version:
Sun Secure Global Desktop Software for Intel Solaris 10+ (4.30.915)
Architecture code: i3so0510
This host: SunOS sgd1.<removed> 5.10 Generic_118855-36 i86pc i386 i86pc
I have the radius-module running for authentication of a single directory with the apache-config-lines:
SetEnvIf Request_URI "\.(cab|jar|gif|der)$" sgd_noauth_ok
<LocationMatch "/secure">
Order Allow,Deny
Allow from env=sgd_noauth_ok
AuthName "Radius authentication for SGD"
Authtype Basic
AuthRadiusAuthoritative on
AuthRadiusCookieValid 540
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
When changing the line <LocationMatch "/secure"> to <LocationMatch "/sgd"> the browser asks for a authentication and then a 'Not Found' page is being displayed.
When using the config-lines from http://docs.sun.com/source/819-6255/webauth_config_browser.html the login-page is being displayed normally and SSGD works.
The main difference I can find between the location /secure and /sgd is: /secure is a simple directory and /sgd is a JkMount to Tomcat.
Changing the JkLogLevel to debug gives the following info in the JkLogFile:
Radius authentication:
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (449): Attempting to map URI '/sgd' from 5 maps
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/examples/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (486): Found an exact match tta -> /sgd
With the password-authentication file:
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (449): Attempting to map URI '/sgd/' from 5 maps
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/examples/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (475): Found a wildchar match tta -> /sgd/*
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_get_worker_for_name::jk_worker.c (111): found a worker tta
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker axis
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker tta
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker examples
It seems that the JkMount is not being evaluated correctly after using the radius-authentication.
Any help will be usefull since I am allready stuck on this problem for a couple of days :(
Thanks,
Remold | Everett

I got response from the Fat Bloke on the mailing list.
Adding the following line in the apache httpd.conf seams to help and resolved my problem:
Alias /sgd "/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/webapps/sgd"
Thanks The Fat Bloke !!
- Remold
These instructions are for a 4.2 SGD installation using SGD's third
party web authentication with mod_auth_radius.so (www.freeradius.org).
With 4.2 Sun didn't distribute enough of the Apache configured tree
to enable the use of axps to build the mod_auth_radius module, 4.3 is
better - Sun now install a modified axps and include files, I haven't
tried this with 4.3 yet though.
I built the mod_auth_radius module for Apache 1.3.33 (shipped with 4.2)
So, this is how we got this working with Radius (tested with SBR
server and freeradius.org server.)
Install SGD in the usual way.
Enable 3rd party authentication:
According to:
http://docs.sun.com/source/819-4309-10/en-us/base/standard/
webauth_config_browser.html
Configure the Tomcat component of the Secure Global Desktop Web
Server to
trust the web server authentication. On each array member, edit the
/opt/tarantella/webserver/tomcat/version/conf/server.xml file. Add the
following attribute to the connector element (<Connector>) for the
Coyote/JK2 AJP 1.3 Connector:
tomcatAuthentication="false"
# cat /opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/
conf/server.xml

<Connector port="8009" minProcessors="5" maxProcessors="75"
tomcatAuthentication="false"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
"By default, for security reasons, Secure Global Desktop
Administrators can't
log in to the browser-based webtop with web server authentication.
The standard
login page always displays for these users even if they have been
authenticated
by the web server. To change this behavior, run the following command:"
# tarantella config edit --tarantella-config-login-thirdparty-
allowadmins 1
Without this, after authenticating via webauth, the user will be
prompted for a
second username and password combination.
# /opt/tarantella/bin/tarantella objectmanager &
# /opt/tarantella/bin/tarantella arraymanager &
In Array Manager:
Select "Secure Global Desktop Login" on left side and click
"Properites" at bottom
Under "Secure Global Desktop Login Properties"
cd /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/conf
edit httpd.conf:
### For SGD Apache based authentication
Include conf/httpd4radius.conf
at the end of httpd.conf add:
Alias /sgd "/opt/tarantella/webserver/tomcat/
5.0.28_axis1.2final_jk1.2.8/webapps/sgd"
# cat httpd4radius.conf
LoadModule radius_auth_module libexec/mod_auth_radius.so
AddModule mod_auth_radius.c
# Add to the BOTTOM of httpd.conf
# If we're using mod_auth_radius, then add it's specific
# configuration options.
<IfModule mod_auth_radius.c>
# AddRadiusAuth server[:port] <shared-secret> [ timeout [ : retries ]]
# Use localhost, the old RADIUS port, secret 'testing123',
# time out after 5 seconds, and retry 3 times.
AddRadiusAuth radiusserver:1812 testing123 5:3
# AuthRadiusBindAddress <hostname/ip-address>
# Bind client (local) socket to this local IP address.
# The server will then see RADIUS client requests will come from
# the given IP address.
# By default, the module does not bind to any particular address,
# and the operating system chooses the address to use.
# AddRadiusCookieValid <minutes-for-which-cookie-is-valid>
# the special value of 0 (zero) means the cookie is valid forever.
AddRadiusCookieValid 5
</IfModule>
<LocationMatch /radius >
Order Allow,Deny
AuthType Basic
AuthName "RADIUS Authentication"
AuthAuthoritative off
AuthRadiusAuthoritative on
AuthRadiusCookieValid 5
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
SetEnvIf Request_URI "\.(cab|jar|gif|der)$" sgd_noauth_ok
<LocationMatch /sgd >
Order Allow,Deny
Allow from env=sgd_noauth_ok
AuthType Basic
AuthName "RADIUS Authentication"
AuthAuthoritative off
AuthRadiusAuthoritative on
AuthRadiusCookieValid 5
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
Put appropriate mod_auth_radius.so into
/opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/libexec
# mkdir /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/htdocs/radius/
# cat /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/htdocs/htpasswd/index.html
<HTML>
<HEAD>
<TITLE> Test Page for RADIUS authentication </TITLE>
</HEAD>
<BODY>
<B> You have reached the test page for RADIUS authentication.
</BODY>
</HTML>
I hope this helps!
-FB

Getting SQL*Net more data from client waits when running a query through web based interface

Hi, you all,
We are having this weird behavior when running query through web based interface, we get a lot of "SQL*Net more data from client" waits, the OEM indicates that the current wait event is SQL*Net more data from client
It's just a very simple query wich invokes a db link.
When I execute the same query on any PL/SQL tool like toad or sql developer it works fine, but that query inside an application executed through a web based interface, it hangs for ever.
Where can I start looking for the problem.
We are working on a 3 Node RAC 11gr2, both databases are on the same RAC.
Thanks.

Hi ,
we managed to reproduce the case in test environment, below are the steps:
1)have 2 databases on different machines, will call the first one local, the other one remote.
2)in the local database create:
a - DBLink to remote database.
b - read data from remote database(we simply used select count(*) from dummy_table )
c - insert data into a table on the local database
d - terminate the connection between the 2 databases (disconnect either machine from the network)
e - commit on local database.
what we noticed was the following:
1)when the local database is disconnected from the network(the machine is not connected to any network at the moment): almost immediately throws an error, and issuing the following:
select * from dba_2pc_pending;we found some data .
2) when the remote database was disconnected(the local database is still connected to the network):
after 7-8 seconds an error is thrown, and issuing the following:
select * from dba_2pc_pending;did not return any data.
since this is pretty similar to our case ,we concluded that it's a network issue.
is this the correct behavior ?
as a temporary solution till the network issue is fixed ,we did the following:
1) changed the call of the remote procedure to calling a local procedure that calls the remote procedure.
2) added pragma autonomous_transaction to the local procedure.
3) at the end of the local procedure rollback the autonomous transaction.
it seems that since the global transaction does not use the DBLink database does not issue a 2PC commit.
this works in my cases since the DBLink is only issed to read data.

Browser based InfoPath Forms in SharePoint 2010 performance has slowed down after SharePoint 2010 SP2

hi All,
Our Browser based Infopath forms have slowed down drastically after applying SharePoint 2010 SP2. Prior to this, we had SharePoint 2010 SP1 and the timings was around 10 seconds (single user) for the entire infopath form to be displayed which has 10-12
views and 5 data connections and 15 business rules and around 100 fields.
But now after applying sharepoint 2010 sp2, the performance has slowed down and it now takes for a single user around 50 seconds.
Refer to the link below, which we followed by applying the patch as well, but the performance is still the same very slow.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0b673324-01c4-49f7-86cb-647aa43fefd6/infopath-browser-forms-extremely-slow-after-service-pack-2-upgrade?forum=sharepointadminprevious
We have raised a ticket with Microsoft, but there is no concrete resolution as to what component of the infopath has made the form rendering and display slow.
Can someone point me to the right resource or knowledge base where i can do a kind of debug, which tells me exactly which infopath dlls are the issue or which part of my form is taking more time. I am using AOLPageTest and Fiddler, but they do not give me
any details where exactly is the bottleneck.
Any tools that give me the details of the bottleneck.
Thanks and appreciate your help in this.
Regards
Ram
Thanks Ram

hi inderjeet,
The application has gone live and its on production, the same application is on pre-prod and UAT, system testing and integration environments.
The infopath form used to work very well on all these environments before we installed sharepoint 2010 sp2. but the moment we installed sharepoint 2010 sp2, the infopath forms have slowed down.
Microsoft has acknowledged that there is an issued with sharepoint 2010 sp2 and infopath form performance, but they are not able to provide an appropriate fix on this.
We have another environment where there is no sharepoint 2010 sp2 applied only sp1 is applied and the infopath form works very well within fraction of seconds.
So your point no. 1 and 2 and 3. does not reveal anything. Fiddler does not give any detailed component by component breakup where the time is taking more.
The form used to work very well before we applied sp2.
I want to know a tool that gives me exactly component by component grant chart kind of breakup of time taken when the infopath url is requested on the browser.
Thanks
ram
Thanks Ram

I am not able to sign in toone of my hotmail account, it gives error message where as I am able to sign in to my other hotmail ids

Hello,
I have three email ids with hotmail.com. I am not able to sign in to my email which I opened last, a few days back. Until yesterday I could log in and see the inbox etc of the said id. But now when I try to sign in, it gives error message
ERROR
The requested URL could not be retrieved
Surprisingly when I try to open my two other emai ids with hotmail, I can open it easily and everything is normal with the other two ids. I wrote to hotmail help center, they have asked me to get in touch with firefox as I am using this browser. Please note I was using Internet Explorer and two days back I shifted to Mozilla Firefox. Please help, it is very very URGENT..

Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
-and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
-and 'looping' https://forums.adobe.com/thread/1504792
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Browser-based interface give error

Similar Messages

Maybe you are looking for