Browser can't connect since 1.4 update

Although email, text messaging, etc. are working, my browser (and my husband's) will not connect to ANY sites. The screen just sits there showing the bookmark list.  If I click on a link in an email, a new page opens, but white screen, no connection.  Any ideas?  Feeling desperate here...
Thanks.

I am having the exact same issue.  Very frustrating.  Have been on the phone almost all day with sprint.  Running every test in the world....on phone with them again right now and she is finally submitting the order to send me a replacement phone.

Similar Messages

  • I have an iPhone 4S I can not connect to iTunes to update apps?

    I have an iPhone 4S I can not connect to iTunes to update apps

    I have this issue, too. It seems that nobody has come up with a solution. My wife's ipad2 works fine. I have an iPad 1

  • Hi, my iphone 4 is stuck telefonu because put the wrong security code. And I can not connect to itunes to update telefonu. I get an error and would like to help me with information Thank you!

    Hi, my iphone 4 is stuck telefonu because put the wrong security code.
    And I can not connect to itunes to update telefonu.
    I get an error and would like to help me with information
    Thank you! [email protected]

    We need the exact error message in order to help you.

  • TS1368 Is itunes store down today? I can't connect since this morning...

    Is itunes store down today? I can't connect since this morning...

    I'm having the same issues on my iphone and my computer

  • HT1338 Upgraded iPad and now browser can't connect to most websites I search

    Upgraded iPad and now browser can't connect to most websites I search

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    For Safari... Settings > Safari > Clear History  Data & Cookies

  • Can't connect to apple server update anyone experiencing same thing?

    can't connect to apple server update iOS 5.1 anyone experiencing same thing?

    jterr1 wrote:
    Same with me.  Could it be over loaded?
    Naah.  Couldn't be more than a half-dozen persons trying to download simultaneously!

  • Can't connect to the Software Update server (lionserver.t3m.private)? Please help!

    Has anyone experienced this; Can't connect to the Software Update server (lionserver.t3m.private)?
    I can no longer sync my iPhone as it needs an iTunes update. When I select update software and I get the error message above.

    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    208.67.222.222
    208.67.220.220
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4

  • Can't connect to wifi after updating to iOS 6

    can't connect to wifi after updating to iOS 6

    really stupid... but click on the arrow to the right of your netowrk and turn off auto-join

  • Safari can't connect after latest Lion update

    Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
    Safari Version 5.1.5 (7534.55.3)
    Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.

    Linc Davis
    Currently Being Moderated  Re: Safari can't connect after latest Lion update
    Apr 2, 2012 5:35 AM (in response to rtorca)
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down. 
    Press the power button. 
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone. 
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
    Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure?

  • Can't connect to the software update server, can't connect to the software update server

    please advise, I like to update my iphone 4 and ipad 2 to 5.1 but I cant connect to the software update server.  I've been trying to connect since yesterday.  Is anybody have an idea why?

    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    208.67.222.222
    208.67.220.220
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4

  • Can't connect to internet after updating new Firmware wrt54g Help please!

    So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

    I am having the exact same problem..  I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help..  It says if you can't access the web based page then to use the TFTP  utility to re-flash the router’s firmware but it seems it cannot make a connection to the router..  I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router..  I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well..  So what gives?  I followed the directions  but the only thing I seemed to accomplish was to brick my router..   Does anyone have a clue on how to go about fixing this problem?   Any help is appreciated.. 

  • Slowdown on secured connections since last security update

    I have 1.5 MBs cable connection.
    Since Feb 15 update I have terrible problems with connection speed to mainly secure sites, like online banking timing out before I can even log in, iTunes movies and TV shows downloads taking 40+ hours for 500MB episode, etc. with download speed between 2.00 and 7.00 kbs (yes, below 28.8 modem speed).
    No problem downloading from Apple Support Downloads or from EasyNews for example with download speed ranging from 220 to 270 kbs.
    Any ideas?

    I haven't seen a cure for that other than rolling back OSX to a previous install.

  • Can't Connect to WiFi After Updating To 2.2

    Hey guys,
    I just updated my software to 2.2, and now all of a sudden i can't connect to my wireless router at home. I can easily connect to it using my phone, but can't using my ipod. I've searched around a bit, and still can't find a solution.
    When i go to settings, WiFi Networks, then i click on the blue arrow next to my router name, the only thing that is entered is my i.p address, and subnet mask. The router and DNS fields are blank. The i.p address number that was automatically entered into it is 169.254.46.155, and the subnet mask is 255.255.0.0
    I have tried resetting the network settings, and turning my D-Link DI-524 Router on and off, but still no luck. In Safari i get the message "Safari cannot open the page because it is not connected to the internet" even though the wifi logo is active on the top, and it has a full strength bar of 3 bars.
    Any help guys? It's really starting to **** me off. Is it a problem with 2.2 in general? My router doesn't have a WEP key by the way. I chose not to give it a password.
    Cheers for the help.

    Thanks for your offer to help.
    I have wasted considerably more time than Mike even - let's say 24 hours spread over 4 weeks trying to get a Touch to connect to my wifi network. For the first two weeks, the Touch saw my network but refused to connect. It had a self-assigned IP 169 address. I did all the recommendations and suggestions - renewed the DHCP lease (20 times?), reset the network settings (50 times?), restored the entire Touch to factory settings (twice), entered and reentered and double double double checked the passwords and the case sensitivity and so on (more times than it is polite to tell you), and it still wouldn't connect.
    Then, last week, it stopped even seeing my network. I suppose the benefit of that is that at least no-one can now advise me to renew the lease or fix the 169 IP - I can't even see the bxxxxy lease or IP setting any more! The error message is "could not find the network xxxx".
    So, please do point me in the right direction - I'll be eternally grateful. I've just totally reset the Touch (again) to out of the box factory settings - and it doesn't see the network transmitted from an Apple Time Capsule one foot away from it.
    The home network was totally reset yesterday afternoon, so I do know what the settings are.

  • Outgoing mail can't connect to server after update

    I updated my iphone and ipad and desktop when the new update came out. My email works only on my iphone and ipad.  My computer recieves messages, but can not send them.  It says it is "offline" and "can't connect to server" uggggh. This has been going on for at least a month now.  I called Time Warner Cable and they basically said they could not help me.
    PLEASE HELP!!!

    Hello,
    Who is your eMail provider, the part after the @ sign?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.

  • Can't connect to Internet after update

    I've had this issue before but I was atleast able to get on iTunes & firefox. After this update my comp can't connect to the Internet period. I called my cable company & everything was working fine on their end. My modem communicates that it's linked my comp by a flashing light. In network prefrences my Ethernet says connected. I do not use a wireless router. I went to the Apple store & managed to get a connection smoothly. After I did the update was when my comp was unable to connect to the Internet, firefox, safari, iTunes NOTHING. I don't have any anti virus programs on my comp.
    Help anyone?

    Anyone???? This all happened after the 10.6.8 update...at the Apple store my Internet worked fine. Once I get this resolved I'm never updating again!

Maybe you are looking for