Browser cannot display E3200 router web page from ethernet connection but can from wireless

I have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions).
1. My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable.
     How do I fix that?
2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not
     (I have them named differently).
     How do I see both wireless connections?

My browser cannot get to my E3200 setup web page from a wired Ethernet connection (wireless works fine).
The Linksys E3200 (1Gb ethernet, “n” wireless) is installed downstream from a Verizon FiOS Actiontec router (10/100 ethernet, “g” wireless).
I cannot put the E3200 upstream from the Verizon router because I would lose FiOS TV capabilities.
The E3200’s fixed IP address is 192.168.1.2 (the Verizon router is 192.168.1.1)
I cannot change the subnet (e.g. to 192.168.2.x)
Clearing the browser cache and rebooting both routers doesn’t help.
Both computers tested have dual band “n” network adapters.
So... wireless connection works fine, but I cannot get to the setup page via wired ethernet.
Help?

Similar Messages

Can't open cr2 files from my 5D but can from my 20D

i just got a new computer (windows vista) and on my old computer i could open cr2 files from both my 20d and my 5d just fine. but now on my new computer i can't open the cr2 raw files from the 5d but can from the 20d. I have photoshop cs2. I am not planning to upgrated to cs3 anytimes soon, do I just need to install a plug in? Please help.

Kristen,
No, no, no. The DNG Converter is a stand-alone executable program. You can even put it on your desktop. You would need it only if your camera model is NOT supported by ACR 3.7, which is the latest version you can use with Photoshop CS2.
In that case, you would use the DNG Converter to convert your raw images to DNG files first and then opening the DNG files in ACR 3.7.
Now, the ACR 3.7 plug-in has to be installed in the correrct location, which is where the old ACR plug-in resides. You will be replacing that old, obsolete ACR plug-in (while Photoshop is NOT running).
[The default Photoshop installation comes with and installs that obsolete ACR plug-in.]
Read the instructions on the download page very carefully, and refer to the FAQs of this forum on the same page where you added this topic.

I can't access shared Photo Streams from my Mac but can from iPhone/iPad. I can access my Photo Stream but not the shared ones.

I can't access shared Photo Streams from my Macbook but can from iPhone/Ipad. I can access my Photo Stream but I can't figure out how to share.

I can't access shared Photo Streams from my Macbook but can from iPhone/Ipad. I can access my Photo Stream but I can't figure out how to share.

I saved web page as html file, but can't open saved file as web page

I did a FILE, SAVE PAGE AS, then chose 'WEB PAGE COMPLETE' - and a directory is created on my hard drive - with the directory name, for example - "c:\....\Ask a Question _ Mozilla Support.htm". (for this web page).
When I try to open the saved web page from Firefox, using FILE, OPEN, I see a new window that looks like a file manager window, I then select that saved .html file and click OPEN, and a new window opens that looks like file manager - displaying with all the files in that directory - "Ask a Question _ Mozilla Support.htm". That is, it does not open and dislpay the web page as I expect it should (that I saved earlier).
However, if I go to the file manager, I can see that directory is saved, and has the Windows Explorer icon associated with the directory "ask a question ....html", and also has a file type of HTML listed. If I double click that directory in file manager, Windows Explorer will open that directory and dis[play it as a web page, as I expected.
I would like to know why Firefox does not open the directory name as a web page from the FILE, OPEN command, but instead shows me the directory contents(all the files in that directory)?
BTW, if I try FILE, OPEN, using Windows Explorer the same thing happens - it opens a new window listing all the files in that directory.
Is this the way the FILE, OPEN is supposed to work?
It seems confusing, because if I am in any other program, for example WinWord, and do a FILE, OPEN command on a Word file, it opens the file as a Word Document - it does not just show the file in a "file manager window.
But when I click FILE, OPEN on an HTML file(directory using Firefox, it does not open that html directory as a web page?

I am in the Windows Explorer 'Details' view, and I see the folder with 'Type' of FILE FOLDER. In that folder are all the .js and .css and .png files - as cor-el said.
''But now I also see'' that there is also an htm file - ''with the exact same name ''as the folder, but it has a 'Type' of 'HTML Document'. When I have Firefox do a File, Open on the HTML Document - it does open the web page that I saved and does display it as a web page.
I did not realize that Firefox saves both:
1) a Directory '''(Type 'File Folder') '''''', and,
2) an html file''' (Type 'HTML Document')
... '''and that they are the exact same names! '''
I was clicking on the wrong one! Instead of clicking in the .html file, I was incorrectly clicking on the folder!
(The archive add on looks interesting, but shouldn't I be able to open the saved web page, from the browser, using File, Open File) ?

FF cannot display all the web pages (it laggs a lot on FB, youtube, gmail). I tried to reset many times (new pc bought with W8, I synchonizeded FF). Help please

Hello everybody,
FF works properly till it crashs, then I have to reset everything and it crashs again. My webpages cannot be displayed properly (fb, youtube, gmail) while it works on chrome and IE.
Please, help me !
Thank you.

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

I cannot print from the internet but can from a word document

I have a HP Lazer Jet 1020. I cannot print directly from the internet. I can copy a document from the internet to a word document and successfully print that way, but I need to figure out how to print directly from the internet - for example, print a boarding pass.

Bailor wrote:
Thank you for the reply. I have Adobe Reader installed and the HJ 1020 installed as the default printer. The error message I get when I try to print from the internet is "script error," "error: unexpected call to method or property access. URL res://ieframe.dll/preview.js. The message box ends with "Do you want to continue running scripts on this page: yes__ no __
Bailor
Update your Java runtime environment to a newer version.
Which browser are you trying to print from? Had you considered trying a different browser? If you are using Internet Explorer then try Firefox or Google Chrome.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I cannot receive group messages from some people but can from others.

Everyone receives my messages but in some conversations I do not receive messages from them. In other conversations it works just fine. Cannot find a difference between conversations. All conversations were with iPhone users

Hi katiebennett09!
I am here to further assist you today. When you have a group message that comes in, right above where you type in your message you should have an option "Group Conversation" or "Individual Messages". Let's check to see if it is set on the Group Conversation. If it is, go ahead and switch it to individual then switch it back to Group. Then test out the group message again. Another thing I would recommend is to go into Messaging, Tap on Menu in the lower left, Tap on Settings, under the section Multimedia Message Settings make sure there is a check mark in the Auto Retrieve. Please, keep us posted.
ChristinaB_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

I have an elocity tablet pc with android 2.2. Will Firefox work on it? I cannot download anything from android market, but can from amazon.

What more info do you need?

The eLocity A7 tablet you have should technically work with the mobile Firefox.
It has Android 2.2 and most importantly a ARMv7 type of cpu, a NVIDIA Tegra II T20 and it has 512MB RAM.
mbrubeck who works on mobile Firefox has been recommending to try the Firefox 9 Beta's because it includes a new interface designed especially for Android tablets.
https://market.android.com/details?id=org.mozilla.firefox_beta
Current mobile Firefox 9.0 Beta 4 for Android (will need to manually update):
ftp://ftp.mozilla.org/pub/mobile/releases/9.0b4/android/multi/fennec-9.0b4.multi.eabi-arm.apk
mobile Firefox 8.0 for Android:
http://releases.mozilla.org/pub/mozilla.org/mobile/releases/latest/android/multi/fennec-8.0.multi.eabi-arm.apk

Can't iTunes from one mac, but can from others

On my Mac Pro, when I go into iTunes, choose "multiple speaker", I get a list of the airport express devices in the house...but I cannot check the boxes next to any of them (except the computer). However, from my MacBook Pro, I can. I run SL, have repaired permissions, etc. I just can't choose to stream to any of the AE units. Suggestions?

I checked that. I can see them in itunes. But front row cannot see them. Both are up to date and sharing. If i manually selct it from inside itunes. no problem. But no frontrow. so no mac remote

Cannot access rented movies via Clear USB Internet connection, but can via wifi and Time Warner Cable. Has anyone encountered the same thing?

I recently rented a movie from iTunes (version 10.4.1.10 on a Windows 7 professional laptop) and when I am at home, on my Clear USB connection, I don't see the Rented Movies in my Library. When I bring my laptop to work however, and connect to a Time Warner Internet connection via wifi, I am able to see my Rented Movies in my Library. Has anyone experienced anything similar?

The problem is similar to
https://discussions.apple.com/message/16594202#16594202
and
https://discussions.apple.com/message/16881706#16881706
which have not been resolved either.

Safari Won't Load Router Web Page

Safari 7.0.3
OS X 10.9.2
Mac Mini 2009
I recently got a new router: TP-Link TD-W8980
If I enter the router's IP address into Safari, I see the router's login page.
After I log in, all I see is a blank page.
If I close the blank page and type in the router's IP address again (before the session times out), the router's web page displays normally.
If I use Chrome, the behavior is normal.
Why do I have to close the page and reopen in order for Safari to properly display the router web pages?
Message was edited by: Buadhai - Correct spelling of Chrome.

I''m sorry, but I don't understand your question at all.
This is from the router's setup guide:
3.2 Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the TD-W8980 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
1. To access the configuration utility, open a web-browser and type the default address http://192.168.1.1 in the address field of the browser.
How would Safari know how to get to the router's web server if you didn't enter the IP address in the browser's address field?

Is it possible to display a safari web page from my phone to lap top

is it possible to display a safari web page from my phone to lap top?

No, why not use laptop browser to view the page?

I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

Hi curtismoxam,
Please try these troubleshooting steps: [[Fix problems connecting to websites after updating Firefox]]

Why does Firefox no longer display .php suffix web pages which are in my Mac?

I have a question about Firefox 14.0.1 displaying .php suffix web page files which are in a Mac running Mountain Lion OS 10.8. In eaarlier versions of Mac OS, for example 10.4.7, I was able to see properly displayed web page files with .html and .php suffixes when those web page files were in my computer. I refer to seeing the page as it should properly display, not seeing the source code. If a page had a .php suffix, the browser displayed the page properly although any php scripts embedded in that page were ignored.
Apple occasionallly updated its OS and browser makers occasionally updated browsers. One day, I noticed that Safari no longer displayed web page files in my Mac if those pages had a .php suffix. However, Firefox and other browsers continued to display web page files with .php suffixes although the embedded php scripts were ignored.
Now, I have Mountain Lion in iMac.
I can no longer see .php suffix web page files in my computer regarless of the browser I use. No browser displays those pages.
A .php suffix web page file which Firefox and other browsers display in 10.4.7 does not display in 10.8 if that web page file is in the computer.
In my computer, I have html and php suffix web page files I want to see using a browser. The files I want to see and the browser both are in my computer. Html files display perfectly with one exception: if php scripts are embedded in the html files, the scripts are ignored. A file the name of which ends with ".php" will not be displayed regardless of whether there is a php script in the file. Safari displays the source code only. Chrome does not display the file at all. Firefox and SeaMonkey, which displayed .php suffix web page files in earlier versions of the Mac OSm now respond to such pages by providing a dialog box which seems to assume that the file is about to be downloaded from the Internet. The dialog box asks me if I want to use the browser to open the file or if I want to save it to disk. The file is on the disk at the time, and the computer is disconnected from the Internet. I click that I want to use the browser to open the file. Then the dialong box reopens with the same question. This happens over and over. I never get to see a web page file in my computer the name of which ends with ".php". With Firefox 14.0.1, I can see .php suffix web pages which are on the Internet or in a 10.4.7 Mac but not in a 10.8 Mac. Did I miconfigure Firefox? It seems unlikely that Firefox lost the ability to display pages in Mac OS 10.8 which it displays in `10.4.7. How can I solve this web page display problem?

Haroon mentions two solutions. I used the easier one, which is to start the Apache webserver already in Mountain Lion and to enable the php already in Mountain Lion. It worked. I see the file correctly displayed with html, css, and php. I see the page by using Firefox. I enter an address in the address bar. For example, the address might be "localhost/example/example.php". I cannot see the page by using Firefox's "Open File ..." menu option or by dragging the file's icon onto Firefox's icon. I tried using your solution also but was unable to find the specific preference to modify. I found the page of preferences which may be modified but I could not find the one I need. I found a list of descriptions of the preferences at http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries
but I could not find the specific preference which I need.
By the way, to enable loading the php module, one uncomments a line of code by deleting the initial "#" character, and one does that by pressing control key and "P" key while the cursor is over the "#" character.
Also by the way, when I use Firefox or Safari to look at the Apache web directory in which my files are, the files are listed case sensitively. For example, the files are listed: Ace, Zygote, bar. This is because lower case follows upper case. THis annoys me. I prefer case insensitive listing. When I llok directly athe directory without using a browser, the files are listed case insensitively. For example, they are listed: Ace, bar, Zygote. I guess taht Apache is doing this.

Need help accessing the router web page. I have been tol...

Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanks

What router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM

Browser cannot display E3200 router web page from ethernet connection but can from wireless

Similar Messages

Maybe you are looking for