Browser close/raise exception after installing Froms/Report Services

Hi,
I have iDS10g R2 recently I have installed Form/report Services(AS) 10g R2 but when I try to open a default/test page on one PC is raise Java exception
Java.lang.classnotFoundexception Oracle.forms.engine.main
and on Second PC browser close automatically without any exception(with Forms/Report Services 10gR2 I have Jinitiator1.3.1.22, someone plz help me.
Many Thanks
Khawar
Message was edited by:
S. Khawar

when we are accessing the server for the first time thru the URL, the client browser automatically downloads required jinitiator. If your client browser is facing the problem that you described, then replace the symcjit.dll file that already exists in the machine with symcjit.dll, from the machine, where it is working.
The same issue was resolved for us by doing so...

Similar Messages

Broswer close/raise exception after installing Forms/Report Services

Hi,
I have iDS10g R2 recently I have installed Form/report Services(AS) 10g R2 but when I try to open a default/test page on one PC is raise Java exception
Java.lang.classnotFoundexception Oracle.forms.engine.main
and on Second PC browser close automatically without any exception(with Forms/Report Services 10gR2 I have Jinitiator1.3.1.22, someone plz help me.
Many Thanks
Khawar
Message was edited by:
S. Khawar

Hi,
the message means that it acclot access frmall.jar, containing the Forms client Java files. Did you perform a fresh install and the run the default demo form ?
Frank

EPSI Dashboard problem after moving from reporting services 2005 to 2012

I have created a Dashboard with Allscripts EPSI with a Reporting Services Report. After we changed from Micrsosoft Reporting Services 2005 to 2012, the report now gets cut in half. I turned a ticket in to Allscripts and they said that it had
nothing to do with their software, that it had something to do with a setting on our Reporting Services server. Please point me into the right direction.

Hi Jason,
Based on my understanding, after you move the report from Reporting Services 2005 to Reporting Services 2012, the report can’t display well.
In Reporting Services, upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file. In your scenario, if the .rdl file isn’t upgraded in the new environment, it’s expected that the report won’t display well. So please
open an .rdl file in Report Designer in SQL Server Data Tools (SSDT) within the new environment, then the Report Designer will automatically create a backup file and upgrades the report to the current namespace. After a report is upgraded, you might notice
additional errors, warnings, and messages. This is the result of changes to the internal report object model and processing components, which cause messages to appear when underlying problems in the report are detected.
Reference:
Upgrade Reports
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Installed SQL Reporting Services 2012 on SharePoint 2013 Server. SQL Reporting Service not available In the list of runnning services or new service applications

Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
Thanks

I had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then.

After install Crystal Report Server 2011, can not access control tool

After install Crystal Report Server 2011, can not access cntrol tool from web or from application. My server OS is Windows 2008 R2 SP1. I follow the fedault setting. How to fix it?
Error message:

Seems like webapps are corrupted, Just redeploy the webapps.
refer the below thread to do the same.
http://scn.sap.com/thread/3400477

After installing Crystal Reports XI on Windows 2003 server with one error..

After installing Crystal Reports XI on Windows 2003 server with one error... REGSVR sapldap.dll error. I had to regsvr it manually. Crystal still didn't run. Found out that Crystal Reports XI will not run until you change DEP to protect only windows program and services. Thanks.

Thank you for sharing your finding. Very much appreciated.
The DEP is a known issue and it is documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Crystal Reports XI was not compiled with the nx flag as it released before Windows XP Service Pack 2 or Windows 2003 Service Pack 1.
As for the sapldap.dll. I'm not sure where this is coming from. I do not see this dll on my install, however it does come with the SAP portal integration kit. So I'm not sure if that is flying around somewhere on that server(?)
Ludek

HT2178 No sound from Doom3 after installed from the App store onto my intel iMac

No sound from Doom3 after installed from the App store onto my intel iMac 10.7.3 Any solutions?

Just just launch the Mac App Store, select the "Purchased" tab and download MainStage or any other application you already bought.

[Forum FAQ] Troubleshooting error "The specified SQL server instance is not valid" when installing SCOM reporting service

Symptom
If you have failed to install SCOM reporting service, you may encounter below error when you reinstall it:
“The specified SQL server instance is not valid”.
(Figure 1)
Figure 1.
Reason
This issue may be caused by multiple reasons, for example the reasons in Figure 1.
However, you may find that SSRS and Report Server website are configured correctly and no SSL or proxy Server is used. In these scenario, you can open the log file under path
to find the root reason:
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Later, you will find the error as below:
ERROR: Throwing Microsoft.ReportingServices.Library.ReportServerDisabledException: , Microsoft.ReportingServices.Library.ReportServerDisabledException:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. ---> System.Runtime.InteropServices.COMException
(0x80090016): Keyset does not exist (Exception from HRESULT: 0x80090016)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSManagedCrypto.RSCrypto.ReencryptSymmetricKey(Byte[] symKeyBlob, Byte[] pPublicKeyBlob)
at Microsoft.ReportingServices.Library.ConnectionManager.<GetEncryptionKey>b__2()
--- End of inner exception stack trace ---;
Solution
According to the error message, you can delete encrypted content by following the steps below:
Open SQL Reporting Services Configuration Manager.
Select “Encryption Keys”.
Click “Delete” to delete all encrypted content. (Figure 2)
Figure 2.
After that, we can install SCOM reporting service again, after successfully install reporting service, we should see the SCOM operation console as below:
Figure 3.
In addition, you may also encounter other errors when installing SCOM reporting service, and the troubleshooting steps may be different. However, we can also check SQL reporting
service logs to find the root reason.
Here are some articles that would be helpful for SCOM reporting service installation and troubleshooting:
How to Install the Operations Manager Reporting Server
http://technet.microsoft.com/en-us/library/hh298611.aspx
Unable to install SCOM 2012 Reporting Services
http://blogs.technet.com/b/mdegre/archive/2013/05/27/unable-to-install-scom-2012-reporting-services.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

Dashboard from Reporting Services

Hi Friends!
I have SQL Server 2008 R2+SP2 installed, I newby on SSRS, however i made some Static reports on it. The idea is develop a dashboard using SSRS, but I'm not sure about many things...
1. This versión requires SharePoint to publish a dashboard? or Can I do this without SharePoint?
2. if it is true, the SharePoint needs to be licensed?
3.To clients get access to Dashboard developed, I need some kind of license?
4.Which manuals or guides for Dashboard
recommend?
regards,
juribeh

Hi Jason,
Based on my understanding, after you move the report from Reporting Services 2005 to Reporting Services 2012, the report can’t display well.
In Reporting Services, upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file. In your scenario, if the .rdl file isn’t upgraded in the new environment, it’s expected that the report won’t display well. So please
open an .rdl file in Report Designer in SQL Server Data Tools (SSDT) within the new environment, then the Report Designer will automatically create a backup file and upgrades the report to the current namespace. After a report is upgraded, you might notice
additional errors, warnings, and messages. This is the result of changes to the internal report object model and processing components, which cause messages to appear when underlying problems in the report are detected.
Reference:
Upgrade Reports
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

TypeLoadException after install SharePoint 2013 Service Pack 1

After install SharePoint 2013 Service Pack 1 Russian I got the following error (approximate translation from Russian):
TypeLoadException: Method 'Upgrade' does not implemented in 'WorkflowServiceApplicationProxy'
Any ideas how to workaround it?

Hi,
Please post your ULS logs here.
Please remember to click 'Mark as Answer' on the answer if it helps you

Installing Forms&Report Services with Oracle Application Server 10g Rel 3

Can I Install Forms & Report Services with Oracle Application Server 10g Release 3 some how?
I am thinking of installing Forms & Reports Services in separate home with Oracle Application Server 10g Rel 3.
Does any body has any different idea so that they both can run more smoothly together.
Thanks
Raj
www.oraclebrains.com

They WILL NOT RUN TOGETHER. We have discussed this many times before. They must be in separate homes.
Check the search function for this forum to find the previous discussions.

After install Crystal Report Server 2011, can not access control tools

Afte install Crystal Report Server 2011, can not access control tools from web or from application.
My server OS is Windows 2008 R2 SP1. I follow the default setting. How to fix it?
Error message is above.

Is Tomcat started? On your Start menu you should have an option to get to "Tomcat Configuration" or, under the CRS menu you can run the "Central Configuration Manager" to start Tomcat.
What URL are you using to connect to the web app? By default Tomcat runs on port 8080 so your URL should look something like this: "http://<servername>:8080/BOE/CMC" or "http://<servername>:8080/BOE/BI".
If Tomcat is running and you're trying to access it from another computer, check to see if the Windows Firewall is turned on for the server - if it is, turn it off for "Domain" access.
If Tomcat won't start, go to the folder where Tomcat is installed and then look in the "logs" folder. There should be a file called "stderr.log" which you can open in Notepad to see what types of errors might be occurring (you can ignore any errors having to do with "persisted sessions".) If there are other errors, post in the BI Platform space to get assistance.
-Dell

Problem in displaying Thai fonts after migrating from Reports 2.5 to 6i

Hi,
We have recently migrated our reports from Reports 2.5 to 6i.
When we were using Reports 2.5, we could display The Thai Fonts correctly, but after migrating to 6i, the data retrieved from database is being displayed as junk characters.
In Reports 2.5 we had set a registry variable ORA_CHARSET_CONVERSION to NO_CHARSET_CONVERSION. We were using NLS_LANG as AMERICAN_AMERICA.WE8IS08859P1 in 2.5.
If we change WE8IS08859P1 to US7ASCII for Reports 6i, the data retrieved from database is being displayed correctly in Thai fonts, but the labels become junk characters.
Do we need to do any special setup in 6i?
Nigam.

Hi All,
Whilst doing the migration (and god knows how long this will take) I need to document the log file of all functions and changes made. The manual states that there is a PLG file created however, I can't seem to find it. I'm running the conversion one by one and not in batch mode. Can someone help me locating the PLG log file.
Thanks

After instalation from retail disc asking serial number

I used before trial version of iWork 09, downloaded from apple.com, today l bought iWork 09 retail disc, but after instalation , when l lunch it ,it asked me to enter serial number

It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

Cannot link files in illustrator CC, as finder window closes by itself after installing maverick

Hi, After installing Mavericks (Doh!) I can no longer link files in illustrator CC as the finder window closes by itself after one second or if I click on anything. It was happening with save as also, but that seems to have rectified itself by reinstalling the program. Anyone any thoughts? Im in a spot of bother!

theoutset,
There are several threads about Maverick issues just now, such as:
http://forums.adobe.com/thread/1320367?tstart=0
http://forums.adobe.com/thread/1319868?tstart=0
http://forums.adobe.com/thread/1320608?tstart=0
http://forums.adobe.com/thread/1320983?tstart=0
Astute Graphics are working on making VectorScribe compatible with Maverick, http://www.astutegraphics.com/blog/mac-os-mavericks-10-9-compatibility /
It may be worth postponing your use of Maverick until the dust has settled.

Browser close/raise exception after installing Froms/Report Services

Similar Messages

Maybe you are looking for