Browser Compatability with NW04s Portal

Hi,
I need to know what all browsers are supported by EP 7.0.
Thanks & regards,
Kris

Hi,
you can make webdynpro iviews to be compatible with IE8 with browser settings as a workaround.
Note 1347768 - Web Dynpro and Microsoft Internet Explorer Version 8.0
you can search in sap notes which consists of another workaroung to make it compatible to IE8.
Regards,
Koti Reddy

Similar Messages

Browser compatibility with 10.6.8 and security update

Hi. I'm running Snow Leopard (v10.6.8) on a mid-2010 quad-core Mac Pro. According to Apple Support, Safari v5.1.10 (which I am running) is the recommended version for this OS. It works great except that every so often I get a warning about Safari not being able to verify the identity of the website "name" and I have to flush the DNS Cache using a Terminal command which I found online. When I was connected to the internet using Airport, the warning was popping up frequently but after switching to an ethernet connection it's much less of an issue. Is this something I'll just have to live with or is there anything else I can do?
My next question concerns the Security Update 2013-004 that Software Update displays as being an available update. I've read a little about it and it seems to apply mostly to the newer Mac operating systems. Should I just ignore it or will it be of any benefit to me? I don't want to download and install it if I don't really need it.
Lastly, is there a particular version of Firefox that anyone would recommend for 10.6.8? I think Firefox 18 was the first version that would work w/ Snow Leopard. How much higher should I go?

What is your objection to not simply upgrading OS X to Mavericks?
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Playbook Browser compatibility with Microsoft Web Apps

Just a humble suggestion. Please ensure that your next software update is completely compatible with the new office Web applications. I have been trying to use my Skydrive account for the last couple of months. I can see my document, open my document in the playbook browser but it will not allow me to add text when using the MS Word Web App. Thanks. If this is fixed I'm excited about what I will be able to do.

Remember, This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here, and rarely on "future-looking" features or upgrades.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Ajax Compatibility with Weblogic Portal 10.3.2

Hi,
I'm developing a POC for a large project. We plan to use Ajax functionality in weblogic portal 10.3.2 using Jsf portlets. I'm getting alot of compatibility issues using Jsf libraries like IceFaces or RichFaces. I've even removed the jsf bridge from the workshop and try to make it work but it throws alot of exceptions.
Is there any good Ajax library that works well in weblogic portal 10.3.2 environment ?
Oracle allows Jsf portlets to be created but does not provide any clear direction on Ajax compatibility. The base jsf components are not good enough to buid an enterprise level application.
DAMM .. dev2dev is also down.
Help would be appreciated.
Regards
Edited by: 787605 on Aug 10, 2010 10:28 AM
Edited by: 787605 on Aug 10, 2010 10:48 AM

I worked through the document referenced in the previous post and I still cant get Open Faces ajax to work.
I keep getting
java.lang.ClassCastException: com.bea.portlet.container.ResourceRequestImpl cannot be cast to javax.servlet.http.HttpServletRequest errors.
The last thing I tried was to extract the javascript into a resources folder and declared it as a render dependency to the portlet, but that is giving me some issues too.
Another issue I get is Perm Gen out of memory about every 3 redeploys.
I know the library I am using uses a ton of AJAX for the cool form widgets it has, so rewriting the AJAX calls is not an option.

BB Browser compatibility with Communicator 2007 Web Client

I need to use the BB Browser to access a Communicator 2007 web client. After entering the URL, the device requests/runs scripts and when the progess bar completes, briefly flashes "loading" and loads a blank screen. Other folks can use this URL with an iPhone, any hope of getting this to work on the BB?

Hi,
From Lync Online document, Lync Online support Lync 2010 and 2013 desktop client. But not mention OCS 2007 R2 client.
More details:
https://technet.microsoft.com/en-us/library/dn194468.aspx
The forum you posted is for Lync Server On Premise only. The issue is more related to Lync online, you can also post a question on Office365 forum for assistance. Thank you for your understanding.
http://community.office365.com/en-us/f/166.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Compatibility with Oracle9iAS Portal R2

Hello.
Is it possible in the release 2 of Portal, to have a report (*.RPT) or a form (*.FMB/*.FMX) file easily shown as a portlet? Or is there a workaround to do something like that?
Thx.

Hi Mark.
Thanks for the response. I'd like to know there are portlets for the 11i CRM app and if so will they be found in the 9ias R2 Portal Product or in the 11i CRM product. If they are in the CRM product dow we need to create portlets there to be used in the portal or are they 'out-of-the box'?
Thanks again,
Louiza

Browser compatable with OSX that works like IE????

My school only works with IE. No other browsers supported. I've tried Safari, Firefox, Camino, and Opera. I finally installed Parallels and I'm using XP home, just for IE. Is there any way to get IE running on the Mac OS?

Have you already tried changing your user agent to MSIE by way of the Debug menu? If all else fails, there's always the now-discontinued MSIE 5.2.3 (link). Note, however, that before it was discontinued, it hadn't been updated for at least 2 years. Use it at your own peril.
Yang

Browser compatibility issue with IE6/7

Hello,
I created my webpage in dreamweaver on a MAC. I have viewed my page(s) A-OK in Safari and firefox however I am being told that my page is not viewing properly on Internet Explorer. I then found the browser compatibility feature to test the page in Dreamweaver. What I have found is that I have browser support problems...this is the error from my index page - which is actually on all my pages!
un-scrollable content bug:
If one or more absolutely-positioned elements are placed within a relatively positioned element with no assigned dimensions, either no scrollbar will appear at all, or it will not extend far enough to view all of the content. (Note: This bug will not affect your page if the content in the AP element does not extend beyond the height of the viewport.)
Affects: Internet Explorer 6.0
Likelihood: Possible
This bug is on line 56: <div style="position:relative">
This issue is on all my pages...please help
I am just not sure how to solve this problem - I am more of a designer than a coder. Any help whatsoever to point me in the right direction is most graciously appreciated!!!
My webpage URL is: lifeforcemd ah yes that is a .com extension - lifeforcemd.com

Hi kadarusastry,
This issue is about the browser compatibility.
Please add your SharePoint site into compatibility view in IE 9 or IE 10.
Or, use IE 8 mode in browser mode for IE 9 or IE 10.
About how to add site into compatibility view, you can refer to the link:
http://support.microsoft.com/kb/2536204
Note: the settings for IE 9 and IE 10 are same.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

F-secure browser protection toolbar was compatable with firefox 4 not with firefox 5

f-secure browser protection toolbar was compatable with firefox 4 why not with firefox 5

See f-secure for an update. f-secure needs to keep their Firefox add-ons up-to-date as Mozilla releases new versions of Firefox.

Newbie needs help with browser compatibility

Ok, so I'm new at this, so this may be something really
simple, but browser compatibility? I made a site in DW;html and it
shows up perfect in safari but internet explorer and firefox not so
much. I did a browser compatibility test in DW and it says nothing
is wrong with my pages, but obviously something must be!!
On my home page, the image of a house that I have next to the
company name shows up fine in safari but not any other browsers.
And my page layout, everything is moved over funny in other
browsers. Also there are link boxes around the table I created with
different brands of products. On safari the boxes do not show, but
all the other browsers it does!! I'm new at this and frustrated!!!
Need help!!
The link is holmeshifi.com and I posted code from the home
page!

OK thanks Ned sorry to soo dumb I'm on a learning curve here! what
I'm trying to do is go to the URLs of web galleries of images from my
main site
so I would presumably have to rename them on my server? i.e. does that
mean adding the code ", "_blank");
to the files on the server?
At the moment I have to use the back button on my browser window which
takes me back to the main site which then has to reload (tediously!)

Weblogic Portal 10.2 compatibility with Microsoft Windows 7

Hi,
We are planning to install WebLogic Portal 10.2 onto Microsoft Windows 7 Operating System(OS). But, we are not sure if there will be any compatibility issues with this version of OS.
Please let us know if there are any known issues when we run WebLogic Portal 10.2 on Microsoft Windows 7 or if there is any patch that we need to install along with WebLogic Portal 10.2 to make it work on Windows 7.
Thanks for your support.
Thanks,
Srini

Try this...
http://edelivery.oracle.com
Access the site by providing the information requested. Once in, on the Media Pack search page, enter:
Product Pack: Oracle BEA
Platform: select your choice
Then hit "Go". On the resulting screen, select BEA WebLogic Media Pack. On the resulting list of products, search for WebLogic Portal 10.2. It should be listed and downloadable. (two different entries, one for the GA version and one for Maintenance Pack 1)
Brad

Browser Compatibility Issue with IE9 and IE 10

Hi Everybody,
I have a page which contains pageviewer Webpart, which redirects to the other page the problem is in IE 8 this works good but comes to IE9 and IE 10 the page is not displaying on the page but link is working good. Can any one please give me suggestions on
this?
Thanks and Regards,
kadaruSastry

Hi kadarusastry,
This issue is about the browser compatibility.
Please add your SharePoint site into compatibility view in IE 9 or IE 10.
Or, use IE 8 mode in browser mode for IE 9 or IE 10.
About how to add site into compatibility view, you can refer to the link:
http://support.microsoft.com/kb/2536204
Note: the settings for IE 9 and IE 10 are same.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Snow Leopard & Compatibility with ATO (Australian Tax Office) CSI applicati

Since installing Snow Leopard on my Mac PRO I have not been able to access CSI and the Business Portal. Have updated to latest version from ATO website but the Business Portal does not recognise the CSI program as present on the computer. Any experience?

Snow Leopard 10.6 & Compatibility with ATO (Australian Tax Office)
ECI V 5.2.0 and CSI V 3.1.19 Using Java 1.6.0_17 required for ATO dealing have 3 issues, the summary below supply the solutions working as at 14 jan 2010.
Newer release version will fix the issues but in the meantime if you need to set up a new computer with OS 10.6.2 . I have summarised the issues and the solutions which I have sourced from online apple discussion and directly from many phone call to ATO support.
Please note: You will need either a new Digital certificate from the ATO with a new password unless or you can export your current Digital certificate from your old computer and you know your current ATO password.
To export existing valid Digital Certificate, Launch CSI certificate manager from within ECI on your old computer select the certificate in the list click the Export button and save it to our desktop, use the default format CSI Store Files (.csistore)
Then copy the file to the Desktop of the new computer running 10.6.x
Next you need to Download ECI and CSI from ATO
http://eci.ato.gov.au/release/eciclient.dmg
http://csi.business.gov.au/Pages/default.aspx
Install first ECI, then CSI
- Using 10.6.2 on a new computer with a Fresh Install (all new) but importing current sDig Certificate. I have encountered 3 issues as 14 Jan 2010 which are:
1) ECI and CSI cannot launch see Solution (A) posted posted by Bruce Linn on Apple discussion, many thanks to him.
2) After resolving issue 1, CSI open and import the Digital certificate but it is not visible, therefore it is not imported, because in fact the csi folder is Write Protected and need to be trashed. See Solution (B) supplied over the phone by ATO support level 2
3 After fixing 1 and 2 , when I import a BAS document from the ATO, when I go to the in Tray and sect the document and click open I get an error message :
Error - BT E103 The XML for the form being opened is invalid. Further details: Content is not allowed in prolog...
See Solution (C) emailed by ATO support level 1
Why the ATO is not posting the solution online saving us to pain of the manyy calls and wait for known issue, this is poor communication and a waste of productivity for all tax payers .
+ A) Solution
1. Uninstall your current CSI installation by going to MacHD > Applications > CSI and choosing Uninstall CSI.
NOTE:- If you are prompted to download and install Rosetta, please do so as it is an application that allows "legacy" applications to work under the 64-bit environment of the Snow Leopard Operating System. It is on your Original 10.6 Install DVD
Supply your computer Administrator password to authenticate action and follow instructions on screen.
2. Once CSI is removed, please use your browser to navigate to the following website: http://csi.business.gov.au
3. Download and save the Macintosh installation of CSI to your Desktop.
4. Locate the CSIINSTALL.DMG file on your Desktop and double-click on it.
5. Run the CSI installer package, which will install many of the CSI components to your system.
6. Once complete, locate the CSI package file (inside the CSIINSTALL.DMG) again and click on it while holding the CTRL button on the Keyboard. This will bring up an options menu - Choose "Show Package Contents".
7. Double click on Resources, then double click on Jar Files (not Jar Files 13).
8. Copy the CSI.JAR file to your Desktop, then close the current folder view.
9. Navigate to MacHD > System > Library > Frameworks > JavaVM.Framework > Home > Lib > Ext
10. Drag and drop the CSI.JAR file from your desktop into the EXT folder.
11. Close all applications and attempt to use the ATO Online Service of your choice.
+ B) Solution which involves Activating Root User deleting invisible csui folder and disbling root user then re-importing certificate
1. Navigate to MacHD > System > Library > CoreServices >Directory Utility.app
Clic the Padlock in Left Bottom Corner to open it and enter your password
2. From Directory Utility.app Menu Bar Select >Edit >Enable Root User>enter a password and confirm
Minimise the window or push it aside you will need to get back to it soon to Desactivate the Root User.
3. Clicl once on your desktop to activate the Finder > from the menu bar select>Go>Go to Folder
Enter ~/.csi Please note the ~ is the key below Escape on your Keyboard
Clicl Go button
You need then to change the View selection to View as Columns (Command 3) or go to View and select as Columns or click the columns icon in the View selection button (3rd button from left)
Then Drag the .csi folder to the Trash and enter you password
Empty the trash
4. Go back to the Directory Utility.app
Clic the Padlock in Left Bottom Corner to open it and enter your password
From the Menu Bar Select >Edit >Disable Root User
Click on padlock to close it
Quit Directory Utility application
5. Go to Application>open the CSI folder>Launch CSI Management Utility.app>Click Import> navigate to your desktop where you should have stored the digital certificate you need to import, locate the certificate and import it> Clic Exit
Close all window and next Down load the Crimson.jar file it will be required for the next step.
Download: http://dl.dropbox.com/u/834924/crimson.jar.sitx
+ C) Solution ECI on Mac OSX 10.6 (Snow Leopard).: Error - BT E103 The XML for the form being opened is invalid.
Please follow these steps to resolve your issues:
1. Unstuff the Crimson.jar file to your Desktop
2. Navigate to MacHD > Library > Java > Extensions
3. Drag and drop the Crimson.jar file from your desktop into the
'Extensions' folder
4. Open ECI, navigate to 'Business', 'Activity Statements', 'In-Tray'
5. Delete collected documents from 'In-Tray'
6. Click on 'Get New Documents' and collect documents again (you may
need to change drop down menu on the top of the screen from 'Ready to
Collect' to 'Collected').
7. Try to open documents
I recommend restarting and Running a repair Permissions from Disk utility.

EREC : Upgrading browser compatibility for SAP E-Recruiting

Hi
We are currently using E-Recruiting 603 Sp 2 (Netweaver 7), does anyone knows how to upgrade browser compatibility. Currently we are only supporting Internet Explorer and Firefox up to version 7.0 and 3.5 respectively. Does anyone how to upgrade the browser compatibility to includes the newer version of IE, Firefox, Chrome and Safari.
Expert please help.
Regards
Ridzuan

Hi Ridzuan,
We have exactly the same problem as we currently run eRecruitment on EHP3 (Netweaver 7.00).
With EHP3, SAP officially support IE and Firefox only. This doesn't help external job applicants who can be
applying using any web browser. In particular Mac users tend to use Safari as its the default browser. Its not at all
good customer service to have to tell job applicants to download and install Firefox just to be able to fill in a job application.
When we originally implemented, eRecruitment worked fine in Safari, but currently all the drop down lists, date pickers
and pop-up dialogs fail to render making it unusable. This is caused by a security restriction in WebKit (used by Safari and
Chrome) blocking frame navigation.
SAP officially support Safari as of EHP5 (which runs on Netweaver 7.02). If running via the portal you'd need Netweaver 7.2 portal or above for Safari support for the portal.
I also found a SAP Note 1642778 " which includes "Unified rendering: Support for Safari, Chrome browser", which is
relevant to EHP4 (Netweaver 7.01). Upgrading to EHP4 and above isn't a small step if you've done any significant customisation on the BSP Recruiter pages as these are replaced with new ABAP WebDynpro pages.
To date I haven't seen the unified rendering corrections back ported to Netweaver 7.00 even though they were for 7.01
and this isn't officially supported (as per the PAM as mentioned by Andy).
See https://service.sap.com/pam
Then look at the link in the middle of the page:
"Browser information for: SAP NETWEAVER 7.0, SAP EHP1 FOR SAP NETWEAVER 7.0 and SAP EHP2 FOR SAP NETWEAVER 7.0 "
This opens a PDF showing official support dependencies between browser versions and SAP versions and patch levels.
EHP3=Netweaver 7.00
EHP4=Netweaver 7 EHP1 (a.k.a. 7.01)
EHP5=Netweaver 7 EHP2 (a.k.a 7.02)
To see what patch level you're running log into the SAP GUI on the eRecruitment system, then select System->Status...
from the menu. Click the detail (maginifying glass icon on the right next to Component Version). Then look at the patch
level of the SAP_BASIS component. Compare this to the patch levels in the browser support PDF to see which versions
to upgrade to e.g. SP24 or higher for IE9 support.
We're currently patching our EHP3 system up to SP25 to help with IE9. Firefox 8 is working (as is Firefox 9 beta).
Sadly Safari and Chrome still aren't working and this is the latest patch level. SP26 is mentioned but not out yet.
Also check the browser roadmap on p17 of the browser support PDF. It makes clear they intend to support Safari and Chrome
going forward but no timescale is given.
George

SSO error message when publishing a BI 7.0 report to the NW04s Portal

Please indicate how to resolve the following SSO error message received when publishing a BI 7.0 report from Query Designer to a PCD folder on a NW04s Portal:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId (server alias)_PORTAL_ABV on host (server alias) with SSO not authorized: Authentication f

Hi,
Please check if the integration and sso configuration did correctly
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
Hope it helps.
Regards,
Mona

Browser Compatability with NW04s Portal

Similar Messages

Maybe you are looking for