Browser continues to refresh...anyone have a solution?
Last night I attempted to do a Google search on my Droid Charge. When I pulled up the Browser where Google is the home page, the page continues to refresh on its own, not allowing me to enter anything in the search line. I have already both restarted the device and, when that didn't work, pulled the battery and it continues to do this. Any fixes? I would rather not have to go to the Verizonwireless store and have them look at it. Of interest is that one of my "apps" is just a link to the web and I am able to get to that site and it works.
After reading a number of other posts on this area I can only hope that my next phone will be less trouble than this one has been. Unfortunately, it is not due until 2/2013.
I finally looked at a few other posts, cleared history and cache and it has been working well (or as well as it has been recently). I find that occasionally I can not get any reception even though it indicates there is a 4G network and that there is ongoing data exchange. Then the application (either the browser or the Xfinify app) will time out for lack of a network. I am not sure whether that is due to network outage or of the NETWORK not being connected to the Internet.
Similar Messages
-
Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W. -
"Adobe Reader Expected a Dict Object Error." Does Anyone Have a Solution?
With the latest versions of Adobe Acrobat Reader XI and Internet Explorer 11 in Windows 7 Professional 32-bit Service Pack1, we are having issues trying to open a machine manual PDF within the web browser. The web page is hosted locally with an Apache web server. Once we click link to the manual, the PDF attempts to download, but then we are prompted with an Adobe Reader "Expected a dict object. http: // localhost/Help/ait.pdf" information dialog box. The PDF then fails to load. Sometimes however it will load successfully without any issues. The PDF is roughly 34MB in size.
We have tried other web browsers (Chrome, Firefox, and Opera) and they do not appear to have this issue. What could be causing this problem? Does anyone have a solution for this? Please let us know.Did you ever find the answer to this problem?? I am having the same problem with
my Acrobat 9 Pro document. When trying to insert a page to the document (300 pages long) I get the error message "expected a dict object
Would appreciate any tips you can give me. -
Importing cr2 raw files won't work on ios 6 when it worked fine on ios5. Anyone have a solution?
I have been importing cr2 raw files to my iPad using ios 5 but importing cr2 raw files won't work on ios 6. Sees files in camera but when import stops it fails with an exclamation mark in red circle. Anyone have a solution?
Don't know if you care anymore or it applies, but I was able to get things working but it took drastic measures.
I had to do a full system reset and update by doing the following:
- Make note of all your settings in your system and apps especially accounts and forget about in app data that's only on your iPad and not in a cloud service because it will be gone after this
- Connect iPad to Mac and startup iTunes
- Hold down Home and Power buttons simultaneously for about 8 sec until the screen turns black
- Release the Power button but continue holding the Home button until there's a popup on your screen which indicates it's in recovery mode
- Follow the instructions to recover your iPad but recover it to factory state, not recover from a backup
- Reinstall all your apps and content
- Reconnect to all your services on your system and apps
I could not restore from a backup since it brought back my bad data too. It also didn't restore my music and no matter what I tried it wouldn't put my music onto my iPad. Had to start clean.
It appears over time that the system gets dirty and there's lots of bad data that can't get resolved. This is especially true if some of your apps have crashed a bunch. -
I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?
If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
For a "blocked plug-in" error, see Step 4.
For a "missing plug-in" error, start with Step 8.
Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
Delete All Site Data and Settings
then click Delete Data. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them. -
cannot connect airport express to ipad
I keep receiving the message: "an unexpected error occurred" when I try to connect my Ipad to my airport express. Does anyone have a solution?I could not "see" my Express via my wireless router or via the Airport Utility until I reset it to Factory Settings by unplugging it then holding in the tiny reset button while plugging it back in, waiting for the flashing yellow LED signal before letting go.
Then I set it up to DHCP - "connect to wireless network" and DOWNGRADED the firmware to 7.3.x
I would tell you the exact Firmware but I can no longer "see" the Airport express............ AGAIN or still.....
BUT at least I am listening to music streaming from my MacBook Pro... Hmmm.
I log back into the router (Linksys WRT110) and it no longer shows the Airport Express as a DHCP client AND the Airport utility can no longer "find" any Airport Devices..
So if I don't move, or there are no cosmic events, or maybe my KARMA is effecting the device or my "VIBES" are good, but I'm not sure if will continue to work.. Sure would like to use this little device from hel*.
Since I have had this Airport Express I have spent many hours trying to get it to work.
It works just long enough to fool me and then takes a dump...
Maybe this time?
5 Minute later...
Music was playing. I went into iTunes and switched from Airtunes to Computer speakers. When I tried to switch it back GUESS WHAT?
[An unknown error (-15006) occurred while trying to connect to remote speaker "Airtunes"]
Wonderful Green LED though. Totally useless piece of equipment AFAIK.
Message was edited by: Daniel Shattuck -
problem opening mail attachments...were opening seamlessly on os 7.0...get an error
Filename
Office open XML document/presentation
File size
Does anyone have a solution? Please help.Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please. -
Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?
I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp
-
I am trying to re-print a portion of a photo enlarged through "poster" in the print dialog box. The original photo printed just fine with the exception of one "page." This is what I'm trying to re-print. I have gone into the Multi- page box clicked on 4 x 4 and then selected the pages I did not want to print. This isn't working as it prints some pages and doesn't print others. All in all it is using a tremendous amount of ink for this project. Additionally I am printing on fabric which involves a deal of time in that preparation. The waste factor is turning into a huge cost. It should just be a simple thing to tell the print dialog box what I want it to do and have it do it. Help, does anyone have a solution?
Hi Pat,
Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
Again, my apology to the forum for my lack of patience in waiting for a reply.
Diane Harris
Sent from Windows Mail -
I have an iPhone 4S wi iOS 5.1 installed and I can't view the option to enqble iTunes Match under the Music menu. I have subscribed to the service and it works fine on my iPad. Does anyone have a solution to this? Can anyone enlighten me as to what's going on?
Thanks in advance!Yes, that's exactly where I was looking, and that option to turn iTunes Match on/off was non-existent, however, I don't know what happened, it just appeared and is working fine.
Thanks! -
Just did a software update, and all that my Macbook Pro does is just beep. Does anyone have any solutions?
It was a list of about five updates, but the one that stands out is the Lion OS X complete update - I think.
-
Hi, I noticed this morning that I can no longer access movies etc. from the the itunes store via my Apple TV generation 1 (silver box)
Does anyone have a solution to help me?
My ATV Gen 2 (black box) is fine.
need help.
regardsThere is a fault with iTunes and apple tv 1
See this thread
https://discussions.apple.com/thread/6099057?start=165&tstart=0
Report it to apple -
This is the error I get. I did not find this on the itunes webpage...
"itunes cannot connect to this iphone. An unknown error occured 0XE80000065." Does anyone have a solution. I am not connecting an iPhone, but an iPod. I cannot therefore sync my iPod to my iTunes.Hi prolough,
Here is a link that should help:
http://support.apple.com/kb/TS3221
Cheers,
GB -
iPhoto frustrating error..The volume for "Df23.JPG" cannot be found. It prompts for all photos with this issue rather than offering an option to ignore. I can find the images in spotlight but not in Find Photo. Does anyone have a solution?
Unless you have the source files that were on the TC or Windows machine you will have to start over with a new library as follows:
Start over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Move the existing library folder to the desktop.
2. Open the library package like this.
Click to view full size
3. Launch iPhoto and, when asked, select the option to create a new library.
4. Drag the Masters (iPhoto 11) folder from the iPhoto Library on the desktop into the open iPhoto window.
Click to view full size
This will create a new library with the same Events as the original library but will not keep the metadata, albums, books slideshows and other projects. Your original library will remain intact for further attempts at fixes is so desired.
OT -
After the upgrade to ios5, I can no longer use my iPad to make purchases on ticketmaster. Does anyone have a solution?
Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html -
Trying to connect my Digital AV Adapter to watch Netflex or Amazon Prime movie from IPad to TV and asking to disconnect AirPlay & mirroring. I do not have Air Play and there is no way to do this. Anyone have a solution? Is this a result of the new iOS update? Thank you.
Try looking in the control panel by swiping up from the bottom of the screen.
Maybe you are looking for
-
How to add a button on a panel's title bar?
Hi, How can I add a button to a panel's title bar? Buttons that are simply added to a panel's title bar become invisible. -Altu
-
Removing J2EE stack from dual-stack installation
Hello. Does anyone know if it's possible to remove the JAVA-stack from a ERP6.0 dual-stack installation ? We have a ERP 6.0 system running HCM services. The ERP system is installed as dual-stack, but the JAVA-stack is not in use as we also installed
-
BIP Requirement - How to get subtotals of each combination val of 2 columns
Hi Gurus, Experts and All, Help me please with my reporting requirement, on how to code this in BIP. Thank you. Requirement: I need to get the subtotals of each combination value of two columns. Example Columns: Group Team AMOUNT Column Sample Values
-
Windows 8 and premiere elements 10
I have premiere elements 10 on disk. Will not load on my new computer with windows 8. Anyone know what I can do about this. Spent hours looking for an answer, came up empty.
-
My Regular Expression is not replaceing lines with br / in them
here is my problem This is my original Code: <p class="x3-subheading-1">DEGREE: Bachelor of Accountancy<br />MAJOR: Accounting</p> I want to find and replace all instances of this subheading class with this: <h3>******************</h3> This is what h