Browser/Device Auto Detect

Because of the problems we are having getting hotspots etc. to work on multiple browsers in HTML5, we decided to publish to both SWF and HTML5 and let the auto detect decide what to launch.
I was assuming that if you were on a standard desktop machine running IE or Chrome with the shockwave plugin, it would deliver SWF. It does not.
How do I get this working? Have I misunderstood how it's supposed to work? If memory serves, it worked this way in version 7.

As far as I'm aware, it's just an HTML file and the file name of the multiscreen.html can be changed to whatever you like. You should be able to change the name to what you want.
The problem is if you were to choose to rename it to index.html. If you did that, you would need to massage it so it calls the appropriate file for the HTML 5 stuff. Well, you would likely also have to first rename the existing index.html because you wouldn't be able to rename it using that name until you did.
Cheers... Rick

Similar Messages

  • Hardware & Devices the Device Auto Detectbit recigbuze tge externbal drive.

    Ran McAfee TechCheck found that Device Auto Detect is not recognize the external drive.
    How do I find and fix this?  Could this cause system not installing McAfee Total Protection?
    HP pavilian a465c desktop computer with MS Windows XP
    Granny72

    Hi Granny72,
    Sorry to hear about the issue your having. To clarify you have an external drive that is not showing up on your computer. What type of external drive do you have? Below is a link to a Microsoft page that will show you how to fix your issue. I would recommend that you go with the Fix It For Me option as the Fix It for Yourself has you going into the registry and if you make a mistake in there it can cause lots of problems.
    http://support.microsoft.com/kb/314634
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Mac wont mount disk images, and fails to auto detect some usb devices.

    for some reason, all of a sudden, my mac won't mount disks. even disks I know in the past have worked.
    also, it wont auto detect some external devices. especially jump drives and hard drives and audio interfaces. It has to be rebooted with the the devices connected.
    I know its not a hardware problem, because everything runs smooth in windows on this computer.
    I did some extensive cleaning recently, and installed a lot of new stuff, but i don't know what could be causing this.
    any help would be greatly apreciated!

    This USB faq may help.
    An SMC reset may help you mount disks.
     DALE

  • How to disable auto detect browser settings

    When I want to start scan to Optimize Internet in "Easy Solve" feature of Comcast. It says DISABLE AUTO-DETECT BROWSER SETTINGS to enable scan running. Please send me the answer.

    Is this page accessible to non-subscribers? If so, please provide a URL. If not, hopefully Comcast can answer this question.

  • At uni i need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can i do something about this without having to change settings everytime i change locations? running V3.6.8 on OSX

    At uni I need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can I do something about this without having to change settings every time I change locations? running V3.6.8 on OSX

    You can look at these extensions:
    *FoxyProxy: https://addons.mozilla.org/firefox/addon/2464
    *QuickProxy: https://addons.mozilla.org/firefox/addon/1557
    *SwitchProxy: https://addons.mozilla.org/firefox/addon/125

  • 5230 won't auto detect my handsfree device

    every time I get into the car i have to go into the phone and "connect to audio device"  how do i get it to auto detect  and connect when the handsfree is turned on?

    Hello Kenc1842 and welcome to the BlackBerry Support Community Forums.
    I would give article KB03391 "How to pair a BlackBerry smartphone with Bluetooth enabled devices"  a look.
    If you need further support, you can contact your wireless service provider.
    Thanks and have a great day!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Auto detection of PXI devices

    Hi,
    we run some PXI systems connected to PCs and sometimes the cards are swapped. Now I would like to write an application (Monitor temperatures, self calibration, calibration, SN) for all systems and need an auto detection of all cards in the system.
    Problem: The solutions provided with the DAQmx system - devices property don't seem to work (empty) if you (only) have scope/fgen/sync devices.
    If I place a IVI device control on the frontpanel  without filter I have all devices in the pull down, but can't find a property to resolve that pull down to devices....
    VISA will find the PXI backplane :/
    Modular instruments ??
    Read the configuration from MAX file?
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
    Solved!
    Go to Solution.

    Here we go
    Chassis 1045Q, 1062Q
    MXI:8336, 8375
    Modules
    5124
    5402
    5404
    5406
    5421
    5422
    5900
    5922
    6251
    6602
    6652
    6672
    Mostly PXI, some PXIe
    Might be some DSO or FPGA will follow.....
    (And that is one Lab... If you have access to the NI customer database lookup PTB   and some colleagues signaling interest in this software ..)
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • Auto detect proxy setting

    in my organization , we are using auto detect proxy setting and my All browser are able to access internet
    through auto proxy but Mozilla is not working with auto detect proxy settings ,unable to access internet .
    kindly suggest for the same issue ASAP.

    hi
    yes here we are using auto detect proxy setting bcz for quich change of network . like a user is working in my office and in second half he will be on a client side . so he will just connect his device without any IP configuration . and also there is no need to remember IP settings.
    so pls help me to resolve to this issue .

  • MFEFX1 not auto-detected on SLM224P-G5

    I have been fighting with a pair of Linksys switches, on and off over the past days. What I want to do is very simple, uplink two swtiches via a Fiber connection.
    I have been supplied with equipment, which on paper is compatible, but in reality seems incompatible.
    I have:
    - 2 x MFEFX1
    - 1 x SLM224P-G5
    - 1 x SRW224G4
    - (also a SRW224P - aparently after some digging listed as incompatible with the MFEFX1)
    I have upgrade the firmware on the SRW224G4 to 1.2.2b to support the MFEFX1.
    I have Firmware 1.0.1 on the SLM224P, listed as auto-detecting the MFEFX1.
    According to the (now seemingly unavalable) document: "Linksys100M-SFP-SwitchSupport-noteV1.3.pdf" all the above should now be supported.
    I have updated the port configuration on the SRW224G4, and this shows "100M-ComboF" and seems to be OK.
    On the SLM224P, however, I see the port as a "1000M-ComboF" and the link stays down.
    I see a led light-up on the SRW224G4 for the connection, but nothing else.
    At this point I wish that I was supplied with the Gigabit Fiber modules that seem to be more compatible with the various switches (including our SRW224P - that detects the MFEFX1 as a 1000M-ComboF device. I tried this before finding the above 'compatibility' document).
    Can anyone supply me with some information so that I can get this fiber connection working? Trying to set any options on the SLM224P to tell it to use only a 100M connection gives an error about this being a 1G port and so can only run a 1G speed.
    Thanks for any help

    aponikikay, thanks for the feedback.
    The document linked is the quick-start guide that came printed with the miniGBIC. I did see that list. It looks like the other document (Linksys100M-SFP-SwitchSupport-noteV1.3.pdf) might not be so acurate.
    I am going to have the SLM switch replaced by a SRW224G4P that is listed as supported. I just wonder why I was supplied with the one set of equipment in the first place...

  • CSCus23563 - Jabber unable to auto-detect proxy in IE10 and IE11

    Please note that the workaround to use an earlier version of IE is not an option for Windows 8.

    hi
    yes here we are using auto detect proxy setting bcz for quich change of network . like a user is working in my office and in second half he will be on a client side . so he will just connect his device without any IP configuration . and also there is no need to remember IP settings.
    so pls help me to resolve to this issue .

  • My auto-detect proxy keeps resetting to manual which won't allow me to access the web

    Frequently when I click to refresh a page or open an new page I get this message:
    "The proxy server is refusing connections
    Firefox is configured to use a proxy server that is refusing connections.
    * Check the proxy settings to make sure that they are correct.
    * Contact your network administrator to make sure the proxy server is working."
    Tools>Options>Advanced>Configure how firefox connects to the internet Settings> will show that once again, the browser changed itself from auto detect to manual. I change it back to auto-detect and hit save, sometimes it works right away, sometimes I have to do it 3-4x in a row in order for the change to "stick"

    See:
    * http://kb.mozillazine.org/Preferences_not_saved
    * [[Preferences are not saved]]

  • PCI Clk Auto Detect

    Ok, i just got my MSI P965 Neo working! :D
    I'm playing a bit with the settings now, and I've gotten as far as a perfectly stable system with FSB@ 310, Mem @ 667. So I'm quite happy with it.
    One thing I'm wondering though is the BIOS (bios 1.6f) option: PCI Clk Auto Detect. What does it do? On what setting should it be (enable/disable). I want my PCI(-e) bus te be locked! (@ 100) which is not an option on the P965 Neo. I assume the BIOS setting has something to do with it. But with which setting do I set it to always be @ 100?
    thanks in advance guys, great forum this with a lot of usefull stuff!
    P.s. look @ https://forum-en.msi.com/index.php?topic=105102.0 for my concerns

    PCI Clk Auto Detect:
    This BIOS feature determines whether the BIOS should actively reduce EMI (Electromagnetic Interference) and reduce power consumption by turning off unoccupied or inactive expansion slots.
    When enabled, the BIOS will monitor PCI and memory slots and turn off clock signals to all unoccupied and inactive slots.
    When disabled, the BIOS will not monitor PCI and memory slots. All clock signals will remain active even to unoccupied or inactive slots.
    It is recommended that you enable this feature to save power and reduce EMI.
    Disable this option will keep forced signal to all PCI/DIMM slots doesn't matter its used or not. (this may help if some of device is not detected by mainboard)
    about PCI-E freq. you have answer already on 2 independently posts.

  • How to set the "Auto detect proxy settings on N82"...

    Hi folks,
    I have a WLAN at the university which is secured of course and I need to under go a web authentication in order to connect to the network and i have done till then on my N82 and later i cannot browse.
    To browse from the fireforx or explorer i need to set the settings to "Auto detect proxt settings" and IP auto... from Laptop.
    I am not able to find such  option on mobile ,,  i need to give the proxy server name which is unknown to any one  and mostly the university IT guys will not say to us
    So can you suggest me some thing to overcome this problem .
    Regards,
    Surya 

    Hi
    there's a location services checkbox in Safari-Preferences-Security
    and one in System Preferences-Security-General
    However, many websites look at the country location of the isp connection you're using, which is a different matter, & not in control of the user. Some sites allow choosing a personal language/location setting, stored in a cookie.

  • My Firefox always changes Network settings to 'Use Manual Proxy' after every PC restart, even if I change the option to No Proxy/Auto detect proxy.

    My Firefox 4 always changes the Network settings to '''Manual Proxy Configuration''' after every PC restart. I have to always go to connections and change this setting to '''No Proxy''' or '''Auto Detect Proxy Settings for this network'''.
    I also tried to revert the values back to default values by using about:config and changing modified values back to default. But it still doesn't works out.
    Kindly help.
    Thank you.

    I had this too, I tried running Firefox in safe mode (no add ons) - that didn't make any difference. I could save other preferences, just not the proxy setting. I'm 99.99% sure I didn't have a virus or other malware. This was only affecting Firefox, no other browser I has installed.
    In the end I created a new profile - http://support.mozilla.com/en-US/kb/Managing%20profiles - that seems to have 'fixed' it for me - the new profile doesn't have the problem, but the old one still does.
    Windows 7, Firefox 4.01.
    Cheers

  • Video times out on hosted website with Auto-detect proxy settings enabled

    When going to our companies website our EMBEDDED youtube videos on the site fail to load while on our physical network (using proxy Auto-detect). The video works fine while on the wireless, or using Internet Explorer (w/autodetect).
    However, if you manually enter the youtube links in the browser, the video works fine.
    When the Firefox proxy is set to manual - the site and video works just fine.
    When the IE proxy is set to autodetect - the video works just fine.
    I used wireshark to figure out what is going on. The when clicking the video it tries to go straight out (not using the proxy) when it should actually use the proxy.
    Our company cannot view our videos on our own network using this browser - PLEASE fix auto-detect bug.
    MORE INFO:
    - We have a Dansguardian/Squid proxy setup - non-transparent.
    - We use WPAD file
    Please let me know how we can resolve this issue without coding our videos to pop out into a new window (ruins the look and feel of the site).
    -Kyle

    Can you try with a modern version of Firefox? like 31? [[Update Firefox to the latest version]]

Maybe you are looking for