Browser doesn't display websites full size..help!!

Hi
Both my browsers Safari and Firefox don't display webpages to the full size of the browsers. For instance when i enlarge my web browser the websites are either all left sided or centered with two large white margins left and right. How do i adjust the browsers to display webpages using the full browsing screen?
I remember having this issue when i first got my macbook pro but forgot what i did to correct the problem. Now i have the new IMAC and have the issue again:(
Thanks for your help.

Welcome to the forums!
when i enlarge my web browser the websites are either all left sided or centered with two large white margins left and right.
Like this forum web page?
How large the web page appears in the browser is governed by whomsoever designed the web page. Nothing you can do about it.

Similar Messages

Some browser doesn't display the MW page correctly

after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
The menu item is been streched out of the blue frame, they are no longer displayable
any ideas?

We have the same problem.
And find it is caused by a combination of your screen resolution, font size and browser window size.
The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
After experiment with it, MW can display much better in our case.

E61i internet browser doesn't display properly

Hello,
I never had any problems browsing the internet on my E61i. My Nokia is always switched on, but today I had to switch it off for a while. After switching in on again, I wanted to use the internet on it. The strange thing was that it wouldn't display any web page properly any more. Pages look messy, like the web browser doesn't how to handle HTML etc. and display it properly.
I often visit web pages not specially made for PDA's, so when visiting these I had to scroll horizontally. That was ok. But now when visiting these pages I cannot scroll horizontally any more; the browser puts all web page contents beneath each other, if you know what I mean. Now I can only scroll vertically.
The conclusion is that many web pages I used to visit have now become useless since the E61i web browser doesn't display them any more as they used to be displayed, the pages used to look like as if you visited them from a PC, but not any more.
Does anybody have a clue?

It sounds like a cache issue. When you view the page, that
page is loaded into your (or your client's) browser's cache memory.
This is done so that when you return to that page it will load
faster (since it is already loaded into memory).
This will only happen if a person has been to the page
recently. There is a limit on the amount of information your
browser will store in cache memory. The more you surf, the more
likely it is that the page will be replaced in the cache memory
with some other information.
You (and your client) can, depending on what browser you are
using, set your preferences so that all web pages will be
completely reloaded every time you visit them. In IE 6 for Win:
Tools>Internet Options>Settings> Select 'Every visit to
the page'. You can also set your cache to be the minimum amount of
space alotted. Note: This doesn't really work very well in IE 6 for
WIN. I use firefox for reviewing changes because I have found IE 6
is completely unreliable for viewing the latest.
Most other browsers will allow you to hold down Shift and hit
'refresh' to throw out the cache for that page and view the latest.
As far as I know this is standard operating procedure for proofing
new pages.
If there is a coding technique to force a browser to use only
the latest information, I don't know what it is.
Good luck.

Every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

What site is doing this? 99% of the time it is a problem with the headers sent from the web server.

My safari browser doesn't display as it normally should

my safari browser doesn't display as it normally should with all the colors/animations/pictures. I've tried the 32 bit mode, I've tried restarting safari, I've tried and even after the update in safari and the OS, it still looks like this. What can I do to fix it?

Hi adidas --
Double check your Safari preferences.
Make sure in "Appearance" that "Display images when the page opens" is checked.

Browser doesn't display the right web page

Hey everyone,
I have this problem with a web page that doesn't display
right. What happen was my client has a news web page that is being
updated once every week. The way I update it is changing the
content on Dreamweaver and copy the codes and pasting them on the
server interface, and resave them. Thus, over riding the old news
page.
Everything display right on my computer. The only thing is I
have to refresh my browser in order for the right page to show up.
Once it did, then it stays as that.
The thing is, my client still sees the old news page even
after I've replaced it with the new codes.
I've done this for him for over 3 months, and this problem
has never occur before.
I don't understand why it's like this. If this is happening
to him, wouldn't it be happening to other people's computer as
well. If it is, then it's bad news, cause no one would like to
always have to refresh their browser for the right news page to
show.
Could anyone explain why this is happening? And how would it
affect other users? Or is this even possible.
Thanks in advance, everyone.
Jen

It sounds like a cache issue. When you view the page, that
page is loaded into your (or your client's) browser's cache memory.
This is done so that when you return to that page it will load
faster (since it is already loaded into memory).
This will only happen if a person has been to the page
recently. There is a limit on the amount of information your
browser will store in cache memory. The more you surf, the more
likely it is that the page will be replaced in the cache memory
with some other information.
You (and your client) can, depending on what browser you are
using, set your preferences so that all web pages will be
completely reloaded every time you visit them. In IE 6 for Win:
Tools>Internet Options>Settings> Select 'Every visit to
the page'. You can also set your cache to be the minimum amount of
space alotted. Note: This doesn't really work very well in IE 6 for
WIN. I use firefox for reviewing changes because I have found IE 6
is completely unreliable for viewing the latest.
Most other browsers will allow you to hold down Shift and hit
'refresh' to throw out the cache for that page and view the latest.
As far as I know this is standard operating procedure for proofing
new pages.
If there is a coding technique to force a browser to use only
the latest information, I don't know what it is.
Good luck.

After updating to the latest version, I'm able to open and use the browser for one day. The next day, the browser doesn't not open up. please help!!!

-reformatted computer, reinstalled everything
-downloaded the newest version of mozilla
-happily went online for one day
-next day, browser does not load
-later the next day, browser doesn't even open up
-now when i go to open mozilla, something like this shows up:
"server busy, taking too long...if your firewall is on make sure mozilla is allowed to browse...adjust proxy settings blah blah...

HI Juanverano,
Not a problem, Safe Mode will disable addons and hardware acceleration. If this continues and it is not an add on this will be the next step to try to disable acceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Is it possible to MANUALLY change Display Resolution (screen size) HELP!!

Forgive me if this has been covered already, but I have tried to look here and
there for an answer
My screen for my iMac-G4 blew out long ago, I had a another screen (a Dell CRT-
flatscreen) hooked up and IT blew out a few days ago, I just bought an LCD
flat screen, but it needs a 1680 x 1050 resolution (WIDE screen(?)and my
iMac-G4 only goes to 1024 x 768 in the "Display" controls. So all my desktop
images are "scrunched" or "stretched".
So is there a "MANUAL" way of configuring the screen size to a "standard"
size within this Mac? or do I need to find a standard size screen?
. . . HELP!!!
You can also write me (preferably at) at:
[email protected]
I VERY MUCH appreciate any help- please realize too, that I am an IDIOT when it
comes to computers, I just paint on this thing (as part of my job as a freelancer
on the side), and WAS in the middle of a job for a client
Thanks again,
-MAVIII

Hello and Welcome to Apple Discussions.
Apple limited the graphics cards in iMac G4s to the native resolution of the built-in LCD i.e:
15" iMac G4 - 1024 x 768
17" iMac G4 - 1440 x 900
20" iMac G4 - 1680 x 1050.
Even when connecting a second display this could only mirror the internal at the same resolution. For the following iMac G4's it's possible to install a firmware hack to open up the full capabilities of the graphics cards:
17" 800MHz
17" 1GHz
15" 1GHz
17" 1.25GHz
20" 1.25GHz
using an application called Screen Spanning Doctor. This is risky but I guess you haven't got much to lose at this point. I've only ever heard of one Mac user actually failing to do the process right though.
You can always use Firewire Target Disk Mode to recover you client's files to another Mac.
I'd be interested if SwitchResX works too. I only have external displays much smaller than my iMacs so can't test it from that perspective.
cheers
mrtotes

Embedded swf not displaying in full size

So i have a swf file. When i open it with any browser or with the standalone flash player it shows up fine. But when i embed it in an HTML file with the following code :-
<html>
<head>
</head>
<body>
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/
cabs/flash/swflash.cab#version=6,0,40,0"
width="800" height="600" id="mymoviename">
<param name="movie" value="Example.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<embed src="Example.swf" quality="high" bgcolor="#ffffff width="800" height="600" name="mymoviename" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer">
</embed>
</object>
</body>
</html>
and open it in Firefox or Chrome, it all scales down to a very small size like 100x80. This does not happen in IE though and it plays at original size. The stage dimensions in the .fla file are like 550x400. Any help.

Check out this thread:
http://discussions.apple.com/click.jspa?searchID=4541194&messageID=5729015

Browser doesn't display applets (classes)

hi all,
i am sure every beginner faced the same problem
though i am not a beginner, i am facing this strange problem, and i can't figure out where the proble is .
i just started developing simple swing applications. first i want to try the examples given in a tutorial.
most of them are japplets (applets created by swing components)
Strange thing is that none of htem works on my browser WHICH DRIVES ME CRAZY !!
let me make my situation clearer:
i put the Japplet class file and the html file whick invokes the applet under the same directory
as far as i know , since they are in the same directory i don't need t to set the classpath , am i right?
well, if i open the html file directly from that directory, it can find the Japplet and it works
but when i put them in another directory under the root of tomcat 4 and try to access them through :
http://<hostaddress>:8080/applet.html
applet.html opens but can't find my applet class saying that app.class not found
the relevant html code is as follows:
<html>
<body>
<applet code=app.class width=100 height=50>
</applet>
</body>
</html>
what am i supposed to do?where am i wrong?
by the way to make sure i also added .; to my classpath
my OS is win 2000,
i am using jdk1.3.1
do i need something else to make them work
thanks for helping in advance :)
cheers :)

Is it a typing error or not.
Your html code is
<applet code=app.class width=100 height=50>Is this really the code you use?
I am missing the " "
<applet code="app.class" width=100 height=50>If you don't use the "", app.class can not be found.

Safari Doesn't display websites correctly

Hey Everyone!
I have been using Safari for a while now, but had always needed to use another OS to display a couple of java or SSL related sites because Safari in both Tiger and Leopard didn't display them correctly.
At work we use Advocent's web based KVM viewer. I have found that in Windows, Firefox and IE display this site appropriately. In Safari, on both my Mac and Windows box, I log on to the main screen and it only loads half way. The login prompt is not there - just the top frame/banner. When I view source, both have the exact same output (including a login box). I believe this means that the site isn't discriminating based on browser.
There are a couple of other sites that this occurs with... but of course, I can't think of them as examples.
How can I troubleshoot or just plain fix this issue. I'd love to put my Windows laptop in a box and watch the dust gather....
Sorry for my lack of symptoms or additional information!
Thanks!

I also get the error message "Certificate Not Verified - code will be treated as unsigned". Please see thread http://discussions.apple.com/thread.jspa?threadID=1359057&stqc=true I just started (as it is a slightly different topic).
Daan

Mail doesn't display the full body of messages

An example: my bank sends me an email that I have a new bill from whoever. The email contents display as you would expect until just after the due date for the bill, and then it's just blank. I've tried this with Load Remote Images both off and on, with the sole difference being whether the bank logo displays or not. The same email displays in its entirety (except for the logo) on my Mac Pro and MacBook Pro, with LRI set off (which I prefer for security reasons). This happens a LOT with all sorts of emails, not just from the bank. It's a total pain because I have to schlep my laptop instead of my iPad Air on trips just to get non-mangled email (and a non-crashing browser, but that's another story). This isn't new, BTW, it's been happening on previous releases of iOS.

Another quirk I've just noticed. Sometimes the mail WILL display completely at first and then after I look at another mail, it changes to displaying with the body missing. This is weird.

Premiere Pro CC Media Browser doesn't display a RAID

I'm running PP CC 7.2.0 on a Mac (10.8.5).
I've added an additional RAID (OWC Mercury Elite Pro Qx2 - 16TB) to my Mac Book Pro Retina attached via USB 3.0. However, it does not show in the Media Browser.
Above shows view of my Local Drives.
Above shows view of mouse selected local drives. The OWC drive is "seen" by the Media Browser, yet I can't get it to "mount" as a Local Drive.
I have reset PP CC's prefs with a restart with SHIFT held down. I have unmounted other dirves, guessing that I had too many devices on the USB bus (a silly idea, really - but worth a test) to no avail.
Thoughts?

Hi Alex
I ended up reformatting the OWC drive using File Utility and now it works fine. All I can think is that there's something Premiere doesn't like about how OWC's formatting utility works. The good news is that the drive works great when you finally get it running.
Sean

Browser doesn't display the applet

Hi , I have this simple HTML code do display my JApplet and below is the error that shows in the java console.
I have placed the class file in the same directory as the html file.
<html>
<head>
<title>
JVM Version checker
</title>
<head>
<body>
<h1>Checking your JRE version</h1>
<applet
     code="JavaVersionDisplayApplet.class"
     width=400
     height=200>
</applet>
</body>
</html>
Java Plug-in 1.6.0_20
Using JRE version 1.6.0_20-b02 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\AM
java.lang.NoClassDefFoundError: JavaVersionDisplayApplet (wrong name: testingpack/JavaVersionDisplayApplet)
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClassCond(Unknown Source)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.lang.NoClassDefFoundError: JavaVersionDisplayApplet (wrong name: testingpack/JavaVersionDisplayApplet)Your help would be appreciated
Thanks.

HeavenBoy wrote:
Hi , I have this simple HTML code do display my JApplet and below is the error that shows in the java console.
I have placed the class file in the same directory as the html file.That is the wrong place for a loose class file in a package (unless the codebase attribute is used judiciously).
<applet
     code="JavaVersionDisplayApplet.class"
     width=400
     height=200>
</applet>
java.lang.NoClassDefFoundError: JavaVersionDisplayApplet (*wrong name:* testingpack/JavaVersionDisplayApplet)
..(Removed the code tags to allow formatting. Used bold to indicate the tell-tale part of the exception.)
If the HTML is at
http://localhost:8080/theapplet.html..this class needs to be located at..
http://localhost:8080/testingpack/JavaVersionDisplayApplet.classNote that the '.class' extension can be left off the code attribute of the applet element.

Outlook 2011 for Mac doesn't display incoming messages. Help!, Outlook 2011 for Mac doesn't display incoming messages. Help!

I haven't done anything to my MacBook since last week (upgraded to Lion), and on Monday morning it stopped receiving emails to my work account (MS Exchange). I have no problem sending emails from my work account. this is very strange. For clarity, Outlook is working fine for my msn account, and was working fine for my work account after I upgraded to Lion. It just stopped working for receiving (not sending) emails from my work account Monday morning.
Thanks in advance!!!

There's a Lion Support Community That might be able to help you better. You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Browser doesn't display websites full size..help!!

Similar Messages

Maybe you are looking for