Browser doesn't show up

Hi,
I'm using iPhoto version '09 (8.1.2) and for months now I've had an issue with it that's an annoyance. I can open the application fine and it seems to work no problem. However, when I use other applications and then come back to iPhoto sometime later, it doesn't always shower the browser window with all the photos. The top bar will be there but I can't find any way to reveal the picture browser without quitting the application and re-starting it, which is a tad annoying. When I quit the program, it briefly shows the browser with the pictures as if it was just taking a long time to load, but it doesn't matter how long I wait for the window to show up - it'll only pop up as the application shuts down! If anyone knows why it does this and can offer any advice on how to stop it from doing that, I'd appreciate it.
Thanks!

Delete the following two files from your Home/Library/Preferences folder:
com.apple.iApps.plist
com.apple.iApps.lockfile
Reboot and try accessing the library from those apps again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key
OT

Similar Messages

I am using Firefox 7.When I tried to open a player the install instructions from the website says, download the widevine plugin from the automatic download pop-up,but my Firefox browser doesn't show me the automatic download pop up to download the plugin.

The automatic download pop up for downloading the plugin was not showing in my firefox 7 browser.

Hi and thanks to not leaving the firefox user alone.
Cor-el your answer is right as the madperson is and I already knew all these
answer and I said that before I don’t use any antivirus and I always turn off my firewall from the moment I installed my Windows.
I even turn off any automatic update for any of my software and I never let any unknown plugins or any thing like that be install without informing me. And if you know some things like Offline Storage and cookies must be to much more than usual and you have to clear them and delete them and I know so much more
And if you want to know it fixed now. But I don’t know how?
For understanding my problem read and research about Ixplorer.exe virus it is the same problem about the speed but the different is it doesn’t show any process in task manager like Ixplorer.exe virus
Bt I have done some things but still I don’t know that’s why it is fixed or not
First: I searched my system and removed any files have been crated on my system from two days ago since the problem happened.
And then I used to go about the article in this page and did like this:
http://answers.yahoo.com/question/index?qid=20080910101846AAazxN5
but still I don’t know any thing about the problem.
I can do so many things to fix but I am just curios if that is a virus why it just cut the speed when I am using the browser.
Please if any one found the reason send me your information I like to know it will improve my knowledge however my problem is solved fro now.

SQL developer 3.1 in schema browser doesn't show package body

Hi,
When i search a package with schema browser, i can't see the package body of other owner, the menu "edit body" is disabled.
My user as select any dictionary et select_catalog_role
When i connect with a DBA's user, i can see all.
I'am on windows with sqldev 3.1
Thanks

Hi erifet,
This one seems to go back and forth. It was originally fixed in Schema Browser for 3.0. The "Edit Body" was greyed out, but an "Open Body" icon in the code editor toolbar for Package Spec was enabled. Here is the forum reference:
30EA1 package bodies missing in schema browser still not fixed
In 3.1, both "Edit Body" and "Open Body" are greyed out, and that applies both to Schema Browser and Connection Navigator for Other Users packages, so at least 3.1 is consistent. The difference between the Browser and the Navigator is Schema Browser has no option to display a Package Body type (must go through Package Spec type), while the Connection Navigator displays a Package Body node type in the tree beneath the Spec node. In the forum thread AM references, Vadim explains what 3.1 does: it uses the ALL_OBJECTS view, which apparently does not include package bodies. Off-hand I'm not sure why it does not include them, and the following link doesn't shed any light:
http://docs.oracle.com/cd/B19306_01/server.102/b14237/statviews_1001.htm
Adding the execute privilege on the package does not help either. At least you have the workaround of using the Connection navigator to view the package body metadata (code) of Other Users if you have been granted either SELECT_CATALOG_ROLE or SELECT ANY DICTIONARY. As for returning to the 3.0 Schema Browser behavior, perhaps Vadim will notice your post and have some explanation as to why or why not that may be possible.
Regards,
Gary
SQL Developer Team

File Browser doesn't show files

I am trying to pull some of my pictures from my Media Hub but can't seem to do it.
All of the pictures show in the Home view but when I go the the File Browser...no files show up in the folders. The folders are on the left but when I click to open any of them there is nothing in them.
I have checked my settings but can't figure out what I am doing wrong....

Check under the "import" folder in the file browser, your pictures might be stored there if you used the import tool.
Cheers.

Labview web browser doesn't show display

Hi! l am having problem displaying the web page in my labview front panel. Anyone got solution to it?
Attachments:
frontpanel.PNG ‏20 KB
blockdiagram.PNG ‏7 KB

Are you trying to launch IE in a separate window or display it on LabVIEW front panel? Your code seems to do the former. Just make sure that the reference wired to the Invoke Node is correct. You can download and try this example for reference.
For the later case, you can use the ready-made ActiveX Container for Web Browser in the .NET & Active X pallette, as seen below.
Then on the block diagram simply use the property or invoke node you need. Here is an example to simply navigate to a URL:
There is also a downloadable example for this method. Complete description of the properties and methods you can use is available in MSDN.
Finally, ensure that you have internet connection
Regards,
A. Yodha
NI Singapore

CAF Service browser doesn't show any available services

Hi All,
I have developed a small application using CE 7.1 SP03.I want to test my Business Object services and application services using CAF ServiceBrowser. I have build and deployed the application and got a status that deployement had happend sucessfully. But the moment I start ServiceBrowser, I can see that Application Services list is empty. Could you please tell me why it is so?Am I missing any configuration or something like that?
Regards,
Prajesh

Hi,
Application service methodes can be devided in to two types:
1) Methodes with return values.These will be shown in the available services part.
2) Methodes without return values.These will be shown in the Available actions for result service filed.
If your method is not shown in these two areas, I think you have not generated and bulit your application properly.Once again generate, build and deploy it.
Go through this help doc.Te[Testing services with Service Browser |http://help.sap.com/saphelp_nwce10/helpdata/en/4a/f707411c5ad349e10000000a1550b0/content.htm]
Sampath

Photo browser doesn't show new photos loaded in iPhoto today

I tried to find some photos in photo browser to attach to an email. The photos were in an iPhoto event I added today, but they didn't appear in that event via the photo browser in iMail.
For background, I used a new SDHD card in my Nikon D80 and found my card reader didn't support the HD function of the card (I have loaded photos from this camera using the same card reader with an SD - not HD though- card for a year with no problem). Instead of using the card reader, I loaded the photos using a USB cable from my camera to my iMac, just as I had always done previously with the card reader. That is the only difference in loading today's photos from any other photos loaded previously
So, I don't know why the photo browser didn't see the new photos and don't understand how loading them directly from the camera versus from a card reader should make a difference. Any ideas about the failure to find the photos via the photo browser even though they are there in the event in iPhoto. Please help!

Unfortunately, it did not. I had tried that several times, and today when I rebooted I thought it might be resolved. I also checked the number of pics in iPhoto and Photo Browser, and the numbers do not match (more pics in iPhoto than Photo Browser by the number I added to iPhoto yesterday).
I also checked for any software updates, but didn't find any. I am current with all the Apple software updates that I get prompted to download.
Any more suggestions greatly appreciated.

Safari browser doesn't show phonenumbers on my webpage. Why?

If I look at our webpage on Safari the phonnumbers is not there, not in iPad and not in my iPhone but if I change to another browser for ex Mercury , it works!
Is there anything I can do to make it work with Safari ?

I can verify that your phone numbers are not visible in Safari. The strange thing is that they are there and can be selected and copied and pasted, etc. Note that when you touch one of your phone numbers Safari gives you a choice of Send Message, Add to Contacts, or Copy.
The iCab mobile bowser does not have this problem. iCab does not treat the phone number specially when iit is touched.
All I can suggest is to report this bug to Apple. Http://www.apple.com/feedback
You might try the developer forums to get some advice on how to work around this problem.

Media browser doesn't show Aperture but shows long-uninstalled iPhoto?!?

hi,
Now that 3.0.1 seems to have solved most of my problems I can finally concentrate on the details.
My media browser in iLife, iWork and mail.app gives me a choice between photos from Photo Booth and iPhoto. The weird thing is, when I select iPhoto it tells me that iPhoto 5 or higher should be installed, which it isn't as I haven't used iPhoto for years (and never on this computer). And, more importantly, Aperture is missing.
I have already deleted the iApps plist, restarted a couple of times, repaired permissions a quarter of a million times in the last few days, and none of it helped.
I know this is an issue that has popped up more often in this forum and for which a definite solution hasn't yet been found, but I'm hoping the iPhoto part may shine a new light on it allowing somebody smarter than I to solve this.
Thanks in advance. Oh, and thanks to the entire forum for what they did in the last few days. So many great tips and solutions were given by so many people.

This worked:
I created a new library by selecting >file, >>switch to library, >>>other, selected New Library. Then Quit Aperture (have to do this because it did not take until I quit). Restarted Aperture and switched back to my normal library.
Access to my Aperture library in the Media Browser came back right away. Desktop Background also returned. I had to restart the Mac to get the Screen Saver to come back.

Apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

How can I get rid of Browser Highlighter? It doesn't show up in add-ons (either extensions or plugins), nor is it in Windows Vista program list.

Browser Highlighter updater box pops up every time computer is started & icon shows up in bottom toolbar. It doesn't show up in add-on list, nor windows programs to uninstall. I'm about to switch to another browser.

https://support.mozilla.com/en-US/questions/711023
if this does not work look if you find it in:
C:\Program Files\Mozilla Firefox\extensions '''and delete it'''
or try search the registry(but be careful) for the word "highlighter" '''and delete it'''
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Favicon doesn't show up in firefox browser

Hi guys,
I have noticed that in some pages firefox doesn't show up (or recognise) their favicon
I give you an example of http://www.november89.eu/
if you load this in Chrome, you see a favicon, whereas in FF not.
I think this might be a task for developers...
PS:
I see another problem (which might be already handled in other thread) -> the favicon of some pages is previewed correctly (on tab bar) , but it still doesn't shows up in the "browsing history" when looking at browsing history...
how to handle this?

The link for the favicon is messed up.
< link rel="shortcut icon" href="\wp-content\themes\Minimal/images/favicon.ico" / >
3 backslashes instead of slashes

Embedded image in SVG doesn't show up in An, but opens in browser.

I feel stupid cause it seems nobody else has this problem:)
I've exported svg file from Illustrator, some graphics and embedded .jpg image, but when i open the svg file in Edge i can see only graphics , the image layer is there but i can't see the image itself.
But when i open it in browser everything is there - graphics and the image.
Why can't i see the embedded image on Edge stage?

I have an iBook, and WiFi doesn't show up as an option in my network folder.
Do you mean that the AirPort network port does not appear, and is enabled, in System Preferences > Network?

Iweb doesn't show aperture media browser??

Hi guys.
Can anyone explain why Iweb doesn't show aperture media browser??
I have latest version Iweb and latest version Aperture 2.0
Thanks for help

Perhaps Aperture is not supported by iWeb.
If you [search the Aperture forum for iWeb|http://discussions.apple.com/search.jspa?objID=c184&search=Go&q=iweb], you might get better results.

The downloads window doesn't show files that I download them.Please, Note: Iv'e already installed IDM 6.04 Build 2 & IE 8 is still my default browser.

The downloads window doesn't show files that I download them.Please, Note: I've already installed IDM 6.04 Build 2 & IE 8 is still my default browser.

neuwerld wrote:
Ohh thanks guys!
It worked as a charm, and thanks Brisbin33 for the autostart.sh tip.
So the thing that caused my whole system not to work as it should was that I forgot to put a "&" after conky?
haha that´s kinda anoying I have been sitting and looking through like a milllion files looking for the answer
But again, really thanks!
/Neuwerld
that little "&" sends the conky process to the background freeing up the current process (your autostart.sh script) to finish doing what it's doing so you can move on to running openbox itself. with this in mind, it should be obvious why keeping conky in the foreground would cause problems.
also, replacing it with (sleep 1 && conky) & means... wait a second, when that's done successfully (&&) run conky, and put all of that () to the background. that way openbox comes up immediatly and only a second later you've got your panel and monitor.
all this after .xinitrc and before openbox

Browser doesn't show up

Similar Messages

Maybe you are looking for