Browser has Stopped working

Hello Blackberry,
Recenlty my browser has stoppe working. If I click on the browser icon nothing happens.
If I try and switch applications the phone states that your device dose not currently have any browser configuration service book entires. Please contact your service prodiver to enable the browser on your device.
The thing is I have just recently moved from Ireland to Canada and I am currently on an Irish provider, but I have not got the data plan and never have had a data plan. I access the browser through wi-fi connections. The wifi has always worked even when I arrived in Canada. now that I have been here for a week it has suddenly stopped.
I have trid the host routing table, taken the sim out, taken the battery out and tried rebooting it.
Is there anything I can do...help, please!!
Thanks

HEY,
Can you explain how to do that???
Thanks for the reply

Similar Messages

"safari web browser has stopped working" ... help?

So a number of months ago (5, I believe) Safari Web Browser crashed and I tried opening it and a message popped up that said:
+Microsoft Windows:+
+Safari Web Browser has stopped working+
+A problem caused the problem to stop working correctly. Windows will close the program and notify you if a solution is available.+
Now up until the crash, I was extremely satisfied with Safari and it was my default internet browser. After I kept seeing this message when trying to start Safari, I decided to uninstall it and reinstall it, then tried repairing it several times. It kept showing the same message for a while so I decided to give up for a few months, so I tried again and the same thing happened. Once again I gave up and today I tried again when I updated my iTunes and that same message popped up and Safari didn't work.
So I decided to post here to see if someone can help me figure out and fix the problem since I prefer that browser to most and never had any problems with it until I froze it and it crashed that number of months ago.
Thanks and your help is greatly appreciated.

Hi,
I'm afraid I'm not familiar with Vista, but in XP the Safari preferences etc. are stored in this location:
C:\Documents and Settings\YourUsername\Application Data\Apple Computer\Safari\
If you know where the equivalent Vista location is, rename the Safari directory to be Safari_backup and then retry launching the application to see if one of the files in there is corrupt and causing Safari to crash.
If it does work after doing that, try moving the files one by one back from the Safari_backup directory to the newly created Safari directory, restarting Safari each time, until you find the problematic one.

When I start play memories (4.0.01) "Browser has stopped working" appears.

When I start play memories (4.0.01) "Browser has stopped working" appears in a popup overlaying the
PlayMemories Home. Popup also requests you close the program, making this version of PlayMemories
unuseable! Prior versions worked. I am running a current version of Windows 7 ultimate.

Hi jkrad4130,
The My Pictures folder is the defautl folder where the software gets all the files from so you can view and edit them. If you want to add other folders containing your media files from earlier imports, just click on File, Add folders and select the folder you want the software to manage. I would also suggest backing up your files to another device, if you have any.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

Internet Browser has stopped working.

The browser on my blackberry has stopped loading anything and i can't get onto any websites, any advice?

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My browser has stopped working

i was using the internet on my bb curve when it just cut off and i cant get back on to it at all. When i press the button it doesn't do anything at all. I have turned my phone off then on and even left it off for 8 hours and still joy. Any ideas on how to get it working again please?

Hello lala79 and welcome to the BlackBerry Support Community Forums.
Do you get any error message when you go to access your Browser?
Re-register your device on the network as shown in KB00510; do you get the registration message? Do you have entries listed in here? If you answer no to either of these questions then you will need to contact your mobile network carrier for investigation into this matter.
If you answer yes to both of these, then you will need to reinstall your device software. Backup your device data and follow the steps in KB11320; before you restore your data file, try launching your browser once more.
Please let me know how you make out!
Cheers
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Tabbed browsing has stopped working

Only one tab at a time works. I have tried all the tab settings to no avail. I have downloaded the tab on left feature but that does not work either. v 3.6.18

What happens instead?
* Is everything going into one tab, or opening a new window?
* Is this from bookmarks, Links, particular urls like Google search results.
Check your options in... Tools > Options > Tabs
Also see:
* Tabbed Browsing in Firefox<br>http://dmcritchie.mvps.org/firefox/tabs.htm
* Tabs configuration, extracted from About:config entries - MozillaZine Knowledge Base<br>http://dmcritchie.mvps.org/firefox/tabs_config.htm

Safari Web Browser has stopped working.

Have been happily using Safari as my primary web browser, but now I repeatedly get this error message. I have trie repairing it and deleting/reinstalling to no avail. Really would like to get safari back as its so much better than IE/Firefox.

another oddity is that another user on the PC can use safari perfectly well.
Not sure what is causing it.

Safari 5.1.5 on PC. Windows 7 64 bit. My favorite browser is not working. Please help. I keep getting a window in the middle of a page saying ''Safari has stopped working'''''

Hello.
My favorite browser Safari (5.1.5 ) has stopped working. Yes I know is on a PC. But is been very good to me for a long time, untill about two months ago. I keep getting a pop up message saying "Safari has stopped working" I will close the pop up message and continue working but within a few minute, the message will pop up again. The browser opens up fast as always and runs fine but the message is a pain and annoying. I'm running Firefox now , but I want my Safari back . Please help.
Jonasfromdc

Thanks. b noir. For the quick reply post.
b noir wrote:
Fingers crossed, your Windows 7 will have been recording some additional information about those.
First, open your Action Center and expand "Maintenance". Click "View reliability history":
Once the reliability report has been generated, look for Critical events for Safari generated at the time of the "Safari has stopped working" messages. Doubleclick the name Safari in the critical events. (Don't click View solution.) Here's a screenshot showing what to doubleclick:
You should see something that looks like the following screenshot:
Copy and paste the contents of the problem report into a reply here. For example:
Description
Faulting Application Path:          C:\Program Files (x86)\Safari\Safari.exe
Problem signature
Problem Event Name:          BEX
Application Name:          Safari.exe
Application Version:          5.34.55.3
Application Timestamp:          4f6ba239
Fault Module Name:          StackHash_7100
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          00000000
Exception Offset:          7d3a1240
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          2057
Additional Information 1:          7100
Additional Information 2:          710027e7a8d30022e5e0ee529f40121f
Additional Information 3:          5158
Additional Information 4:          5158ee4164428f7b514a5e7ee9654f7c
Extra information about the problem
Bucket ID:          2871481836
I generated the problem report similar to the above screen shot " by way of IE 9 " but will not let me copy and paste the contents as a screen shot in reply to your post here . Copy to clipboard did not work either. I might be doing something wrong. Oh well.
By the way , the only difference is- The Problem Event Name of mine is not BEX. but rather : APPCRASH. Fault Module Name : JavaScriptCore.dll. Fault Module Version: 7534.55.2.1. The rest are very similar to the above screenshot. If you need more information then I guess I have to do it all manually. Please let me know. Thanks again.
Jonasfromdc.

I get the "firefox has stopped working" message after closing browser

Hello.
My problem is that when I close the FireFox browser I get the "FireFox has stopped working" message. It's pretty annoying. I've read some other posts here that described a similar problem and have tried some of the suggestions in them including:
A clean install, a browser reset, running in safe mode, unchecking hardware acceleration, disabling extentions and plugins one at a time, uninstalling my antivirus (avast), rolling back to version 23.01 and checking run in compatibility mode that someone claimed helped them. None of this was effective.
It seems like after a computer restart the browser will be ok for 2-4 closings and then it will start with the message on every closing. Also, after I uninstalled avast it was good for 6 closings. Rolling back also gave me about 6 message free closings. But then the messages start and doesn't stop.
Is there anything else I can try? Thanks in advance for any suggestions.

One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

Browser Install Fails, it says "Firefox has stopped working" and it does not install. I cant use your browser.

I had few issues with Mozzilla browser so i uninstalled it completely and tried to re install it again. But when i try to reinstall it , it does not install fully , it breaks half way and says, Firefox has stopped working. I cant install Firefox now. Can you help.

Try this instead:
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
*Start the installation with a double-click on the desktop icon
Make sure that your security software isn't causing problems.
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

"Firefox has stopped working" message everytime the browser is closed

Everytime I close the browser, I get "Firefox has stopped working" message. I have Firefox 18 on a Windows 7 64-bit machine.
I also uninstalled and re-installed firefox but the issue still remains

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Coverflow 'click ahead to browse' feature has stopped working

Hi Everyone.
I am a user of the coverflow view in itunes 7.01 and i often browse by clicking on the cover a few ahead of the one selected and having it quickly jump ahead to that. Well it has stopped working. Coverflow will still function correctly using the scroll bar etc, but this particularly useful bit just doesn't move any longer. I updated from 7 to 7.01 when I first noticed the problem but it stayed the same. The only thing I had done in itunes before noticing this problem was to use a small programme called MoveTunes to move some songs from one hard disk to another - but I have done this before with no problem.
I would be grateful for any suggestions.
Thanks
PM 1g, ibook 1.33 Mac OS X (10.4.8)

Hi Federico
Good and bad news - coverflow is working properly again but I do not know how I fixed it. I tried everything I could think of, fixed permissions, rebooted, freed up some more HD space, made sure I had correctly uninstalled the non-working volume logic and 3D OSS plugins, checked that I didn't have duplicate copies of album art anywhere, etc, but nothing worked. Then a couple of days later it just started working again on its own. I hope you get the same good luck.
Regards

HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7. Message shows that iTunes has stopped working. This happens every time. I have updated iTunes Software. Will not solve the problem. What is wrong

I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
          iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
          "Check online for a solution and close the program"
          "Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
     Here are some of the Problem Details:
     "Problem signature: APPCRASH
     Application Name:     iTunes.exe
     Application Version: 11.0.1.12
     Application Timestamp: 50c8fc7e"

I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony

"Adobe Bridge has stopped working"

Just installed CS2 Version 9.0. Having "Adobe Bridge has stopped working" Windows 7 Pro 64. Is there a solution to this problem?
Thanks?

Curt,
Thanks for getting back to me.
Bridge had worked before. When I refer to BRIDGE I mean that I go to a
folder of photos in PS and select file/browse to open. This feature
does work with other folders of photos. It was when I downloaded photos
from my cell phone into a folder and in PS went to file/browse the
browser will open and then I get a message "Adobe Bridge has stopped
working."
I can still go to another photo folder in PS and select file/browse and
it will work, the problem is with the photos from my cell photo.
Do you have any ideas.
I have the latest versions of PS.
Thanks,
Jack

Adobe Bridge CS6 has stopped working - has issue been resolved?

Hello.
I am experiencing the above problem with a new install of CS6.
Has this issue been resolved?
CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
Thanks for any help you can provide.

A follow up to the above.
There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
For those of you who may have this situation.
Here is where I found the solution (sixth thread down):
Bridge CS6 won't open running on Win7

Browser has Stopped working

Similar Messages

Maybe you are looking for