Browser (integration builder ) is not getting opened in tcode SXMB_IFR

hi
i am working on SAP XI 7.0 sp12 . recently we are facing one problem like when we hit tcode SXMB_IFR , the message shows : "start of application: start integration builder " but it does not starts browser(integration builder ) .. did any body face this problem.. please help
akhil

Hi,
I think one or more of below mentioned services are not up and running.
1. Start the Visual Administrator of the J2EE engine.
2. Choose Cluster u2192 Server u2192 Services u2192 Deploy
3. In the right frame, select the radio button Application.
A list of the deployed services appears.
4. Check if the following services are running
u2022 All services beginning with
u2212 sap.com/com.sap.aii*
u2212 sap.com/com.sap.lcr*
u2212 sap.com/com.sap.xi*
u2022 sap.com/com.sap.rprof.remoteProfile
If one of the services is not running, select the services and choose Start Application.
After doing the above steps try again, you should be able to see the IB.
Regards,
Sarvesh

Similar Messages

SPORXY Integration Builder data not understood

Hello everybody,
I want to connect a 6.20 System to our XI 7.0 (SP13). The Integration Engine in the 6.20 is maintained correctly (Application System, Destination works), the sldcheck works fine.
I use the table SPROXSET instead of the exchangeprofile. The profile is empty, the SPROXSET has an valid entry (IFR_ADDRESS: http://systemDNSName:57000/rep).
The SPROX_CHECK_HTTP_COMMUNICATION says: HTTP communication functioning
But the test =>Check with report SPROX_CHECK_IFR_RESPONSE and ==>Check with report SPROX_CHECK_IFR_CONNECTION both show the failure: Integration Builder data not understood
Normally I connect 6.40 Systems to the XI, they work without a problem. Is there something special with 6.20 Systems?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 1, 2008 10:04 AM

The Add-On is isntalled.
I found out something else. When I try the Connection Test No.3 - SPROX_CHECK_IFR_RESPONSE (in the SPROXY), the IE opens the following Url:
http://myHost:57000/rep/ifraccess?service=query&type=namespace
and I get a HTTP 404 Error. What is the correct Adress here?
Regards,
Thomas
Edited by: Thomas Weinschenk on Apr 4, 2008 4:49 PM

Integration Builder data not understood - Problem

Hi all,
i have a problem with XI.
I want to generate Proxies from XI Content in a SAP System.
in SPROXY i can't see any data from the repository.
SLDCHECK runs successfully.
If i run SPROX_CHECK_IFR_CONNECTION i get the failure message "Integration Builder data not understood". I have already changed all passwords for the service users in XI and Exchange Profile.
can you give me a hint what the problem could be ?
br,
martin

Hi martin,
Make sure your business system is set up as follows:
1. Transaction SXMB_ADM
- Role of System: Application System
- Corresponding Integration Server:
dest://<your_sm59_http_destination>
2. Ensure that the RFC destinations LCRSAPRFC and SAPSLDAPI are
maintained and working
3. Run SLDCHECK to verify that the connection to the System Landscape
Directory works.
4. Check that the Integration Repository is running and data is maintained there.
check out the 18th page of this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Message was edited by:
MANIKANDAN subash chandran
Message was edited by:
MANIKANDAN subash chandran

Any iviews not getting opened from the portal content.

Hi,
Recenlty i found that the any of the iviews of the portal content are not getting opened.When i click on any of the iviews a blank page pops up.But the iviews when dispayed in the top level navigation gets opened there.Even the personalize option in the masthead pops with a blank screen.
Am not able to figure where the problem is exactly.Pls help.
Regards.
Adity.

We are using IE-7 and as per our clients requirements the portal has to be run on IE-7.May be this may be the browser problem but what settings i need to do to make all iviews running fine.This problem was not earlier but i am seeing this since a week.And all iviews pop up with a blank screen.
Regards
Adity

Parameter window not getting opened

Hello All,
While submitting any concurrent request, the parameters window is not getting opened and because of which the system is not allowing to proceed as some of the mandatory parameters are not getting entered.
How can I resolve this?
Thanks in advance!

997274 wrote:
Hello All,
While submitting any concurrent request, the parameters window is not getting opened and because of which the system is not allowing to proceed as some of the mandatory parameters are not getting entered.
How can I resolve this?
Thanks in advance!Do you have any invalid objects in the database?
Please generate the form via adadmin or manually and check then.
Thanks,
Hussein

Error: Integration Builder can not start

Hi,
Before installing SP 12 XI worked fine.
But while deploying with the SDM I got an error when I want to deploy this file "SAPXITOOL12P_5-20000274.SCA".
So when I start the intergration Builder, Web Start shows an error like "Integration Builder can not start?
Can anybody help me??
Thanks.
Regards
Stefan

Hi Shravan,
it is a really big one:
Starting Deployment of com.sap.xi.rwb
Aborted: development component 'com.sap.xi.rwb'/'sap.com'/'SAP
AG'/'3.0.1220050720142859.0000':
Caught exception during application deployment from SAP J2EE Engine's
deploy service:
java.rmi.RemoteException: Cannot deploy application
sap.com/com.sap.xi.rwb.. Reason: Errors while
compiling:D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl10 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1259: cannot resolve symbol
symbol : method getMessageVersions (java.lang.String,boolean)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageVersions( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1350: cannot resolve symbol
symbol : method getVersionDetailsUrl (java.lang.String)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getVersionDetailsUrl( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean ((IntegrationEngineMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationEngineHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationEngineHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationEngineHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationEngineHome {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl11 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean ((IntegrationServerMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationServerHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationServerHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationServerHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationServerHome {
^
24 errors
; nested exception is:
com.sap.engine.services.ejb.exceptions.deployment.EJBFileGenerat
ionException: Errors while
compiling:D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl10 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1259: cannot resolve symbol
symbol : method getMessageVersions (java.lang.String,boolean)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageVersions( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1350: cannot resolve symbol
symbol : method getVersionDetailsUrl (java.lang.String)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getVersionDetailsUrl( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean ((IntegrationEngineMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationEngineHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationEngineHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationEngineHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationEngineHome {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl11 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean ((IntegrationServerMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationServerHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationServerHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationServerHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationServerHome {
^
24 errors
(message ID:
com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of com.sap.xi.rwb finished with Error (Duration 12172 ms)
Can you help me??
Thanks
Regards
Stefan

ABAP Proxy Error - Integration Builder address not maintained

I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
On configuring the relevant connections, I run SPROXY and get the following error:
Integration Builder address is not maintained in the Exchange profile (Connections)
I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
On running the reports
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_HTTP_COMMUNICATION
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_CONNECTION
My question is:
What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
and SAPSLDAPI_<sys id of XI server>
Should the XI Integration Builder address be maintained in R/3?
If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?

Just recheck the steps with this and come up with doubts then
How do you activate ABAP Proxies?
Regards,
Prateek

Adobe Reader X cosmetic bug - browser integration scrollbars do not move

There appears to be a cosmetic bug in Adobe Reader X (10.0.0) browser integration. When you open a PDF in a browser window, the scroll bar remains at the top of the window when you scroll the PDF using page up / page down, or the mousewheel. If you mouse over the scroll bar, it moves to the correct place in the PDF.
This bug is consistent across IE 8, Chrome 7.0.517.44, and Mozilla Firefox 3.6.12 (running on Windows 7 Enterprise x86).

*PUSH*
Please fix this. Its just ridiculus to provide a plugin like _THE_ Adobe Acrobat Reader and not be able to implement a proper scroll behavior. Come on it can't be _that_ hard .
Thanks

Integration builder can not start up after sp9 to sp15 upgrade

ID cann't start up, but IR can.
java web start error is :
can;t download http://sp001:50000/dir/directory/iaik_jsse.jar
I have tried re-Initialization but not work.

hi
ref this
Java Web Start
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]
XI Integration Builder run on top of Javau2122 Web Start 1.4.2, which is part of J2SE 1.4.2.
You need to download Javau2122 WebStart 1.4.2
Troubleshooting:
Probably Javau2122 WebStart does not detect the correct Proxy Settings .
This could be set to None or to specific for values HTTP Proxy and HTTP Port .
Contact your network administrator for the correct settings.
To change the Proxy Settings:
Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
Choose File -> Preferences -> General
Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
ChooseOK
Close Javau2122 Webstart

Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

Dear Friends / Experts,
I had spend many days and explored all Weblog and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
Our Environment - PI 7.0 SP 16
Created a new role in the Integration Builder Design
u2013Add Object Types of any Software Component and Namespace
- Enable usage of Integration Builder roles in Exchange Profile
Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
Assign users to the newly created Integration Builder roles
u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
u2013Assign users to these roles
u2013Assign the Integration Builder roles to the above groups in Web AS Java
u2013Assign unrestricted roles to Super Users
Please help - How to validate whether Data Dependent Authorizations are Activated?
I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
Thanks a lot
Satish

Hello,
so to give you status of our issue.
We were able to export missing business component .
But we also exported some interfaces after that and we had some return code 8, due to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
Also recommending to read that, which is pretty good.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
Thanks all,
S.N

My i pad is not getting open after it bang with door no scratch has come because it was in leather cover but its not getting open kindly suggest?

my ipad is notb getting open after my baby had bang with the door no scratch has come but it is not switching on can u please advice.
i will be thankful if u provide sufficient information.

Hi Naveen,
What you are doing is not supported by Oracle. From EM Database Console FAQ (863631.1):
What action needs to be taken if the hostname or SID of the database server is changed?
If there is a hostname or SID change for the database server then the database console needs to be recreated. There is no other solution if the hostname or SID is changed other that recreating the database console. All database console configuration files are created under the hostname_sid directory and the configuration files along with the repository keeps reference of the hostname, which is why dbconsole needs to be reconfigured if there is change in hostname/sid.
Refer : Note.293678.1 How To Reconfigure DB Control After a Hostname, Domain name or Listener Change Has Occurred On The Server
And take a look at note 278100.1: How To Drop, Create And Recreate DB Control In A 10g Database
Eric

HT1688 i update ios 7 but it got sim loked and even i enter pin it is showing unlocking please wait but it is not getting opened

i update ios 7 but it got sim loked and even i enter pin it is showing unlocking please wait but it is not getting opened

Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.

Can i copy "setup" (windows 8.1, office 13) to usb and transfer to XP where internet 8 has crashed browser. I am not getting option to save setup

I am trying to copy firefox to USB from my laptop and install on desktop XP as per support forum: Windows updated then crashed internet explore 8 on XP and now I have no internet connection only on that computer (error message says unplugged).. I have windows 8.1 office 13 on my laptop. I am not getting the option to save/ run firefox on the laptop, just automatic download. Should I uninstall and then reinstall? Or maybe I cant transfer to XP in any event. Any advice for non techie would be much appreciated. I've spent quite a lot of hours on this.

appreciate your assistance, but your replies are a little peremptory to say the least. I copied the set up to my USB on Windows 8 laptop and then transferred to XP desktop (as per previous forum entry). If I had the internet on XP, I would have downloaded and installed that way. As it turns out, after I re-rebooted my broadband hub and reopened moxilla, I got the internet back, so evidently a combination of internet explorer 8 update issues which from previous research, had stopped the computer reading the hub address. All up and working now.

Integration Directory not getting opened

hi All,
We are not able to open Integration Directory in XI 7.0 but IR (repository) works fine. While i was browsing through the Forum found (Forum ID# 135222) that we can just re-start the sap.com/com.sap.xi.directory in Visual Administrator but not sure where it's located in VA. Please help to resolve thi problem.
Thanks
Sekhar

Hi,
try re-initialization
from this blog:
Java Web Start
then is should start working
Regards,
Michal Krawczyk

Integration directory is not getting displayed..

Hi Gurus,
Our developers are facing an issue here- they are not able to view the Integration Directory (ID) window with their own ID's as well as PISUPER. They are able to view the same instance ID from a different server. But I'm able to view to ID from my machine. When they key in their login credentials in the integration directory, after which a window will be opened and that they cannot see it.The process and the application keeps running in the windows task manager. Is this sort of a display problem or something?
Any thoughts would be appreciated!
Regards,
Sriram

Hi,
Also make sure they are have JDK1.5 and not any other version installed. Try to delete your temporary Java files on your PCs and do the re-initialization Raj mentioned, and try again. You can also enable Java console from control panel to see where you're getting stuck.
Regards,
Gökhan

Browser (integration builder ) is not getting opened in tcode SXMB_IFR

Similar Messages

Maybe you are looking for