Browser is not opening after updating the os

Hi,
I am using 9300 curve.I have upgraded its os and after that I cannot open browser , have done everything but its not working could you please help me also my blackberry app world doesnt't open i always get a message that data services are not operational and for browser i got a message of uncaught exception please guide me.

Hello Arsala...
What method used to update the Blackberry
Erased the vendor.xml file when updated your BB.
If you want to use the browser remember to have data plan or BIS for you to browse ...
But your problem is that the browser does not open ...
At the time of the update not done correctly.
Apply Wipe, Wipe Factory Reset again and load the OS again either via Loader
Regards...
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Similar Messages

After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

This seems to be most common with lower resolution pictures. You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale. Or user a higher resolution picture, which works better with the new OS.

AS does not open after update

Cannot get adobe story to open after update (indeed there was difficulty before as well; it got worse after update). This applies to both offline and online. Even after a restart. All I get is a big, blank, black page, with no projects on it, not even the sample project. Any suggestions would be greatly appreciated. Thanks.
christophermark

Thanks, Ali.
I'm working on MacBookPro Intel with Snow Leopard, 10.6.5 using Firefox as
the browser. I have Chrome and Safari, but haven't tried them.
I updated Flash. I find AIR installer and uninstaller in
Applications>Utilities, but I can't find the AIR app anywhere. (So how was I
able to go online with AS in first place?) When I try to unintall AIR (with
the idea of reinstalling) it says that Adobe Story will no longer work
(should I proceed anyway?)
I've cleared the cache in Firefox, restarted AS, but the clearance had no
effect. Still get a blank, black page.
Thanks for trying to figure this out. Any other suggestions?
Christopher Mark

HT1338 Aperture will not open after update? What do I do?

Aperture will not open after I updated. What do I do?

Mgoss, quit the installer or App Store/Software Update (depending on what you're using to update) and restart your machine. With Aperture closed, drag the Aperture application to the trash, then reinstall Aperture from your original media and, if necessary, update again.

Itunes will not open after updating to the 10.2 version

After updating itunes does not open, an error messege pops up saying iTunes has encountered a problem and needs to close, and this is what the data says...
Exception Information
Code: 0xc0000005 Flags: 0x00000000
Record: 0x0000000000000000 Address: 0x000000001600246c
System Information
Windows NT 5.1 Build: 2600
CPU Vender Code: 68747541 - 69746E65 - 444D4163
CPU Version: 00040FB2 CPU Feature Code: 178BFBFF
CPU AMD Feature Code: EBD3FBFF
Module 1
iTunes.exe
Image Base: 0x00400000 Image Size: 0x00000000
Checksum: 0x009538af Time Stamp: 0x4d756476
Version Information
Signature: feef04bd
StrucVer: 00010000
FileVer: (10.2:1.1)
ProdVer: (10.2:1.1)
FlagMask: 0000003f
Flags: 00000000
OS: 00000004
FileType: 00000001
SubType: 00000000
FileDate: 00000000.00000000
This goes on and on through different modules concerning .dll files but nowhere did is see an error code, this whole thing might be the code but I wouldnt know, the data is very very long. I've tried uninstalling and reinstalling as well as the utility cleanup but nothing works.
Thank you for any and all help!

Many thanks.
AppName: itunes.exe AppVer: 10.2.1.1 ModName: dnssd.dll
With that one, the only workaround I'm aware of at the moment is to disable your BonJour Service.
Right-click "My Computer" and select "Manage".
Expand "Services and Applications"
Open "Services"
Right click on the BOnJour service and select "properties".
In the General tab, change the start-up type to "disabled".
OK out of the tab.
Restart the PC. Does iTunes launch for you now?

The email page will not open after updating to ios 8.3

I cannot access email after updating to IOS 8.3

If you search on google this is an old problem that many people have after upgrading devices and restoring from backups. If I can remember correctly, just re-sync the device in iTunes, and it should sort it out.

IPHOTO Library file will not open after update of iPhoto 9.6.1

I am trying to open up my IPHOTO Library in IPHOTO 9.6.1 with not success.
My computer is a Mac (27-inch, Mid 2011), 2.7 GHZ Intel core i5 processor, 8 GB ram, AMD Radeon HD 6770M 512 MB graphics card, 1TB Hard Drive.
My iPhoto 9..6.1 appears to be created on March 16, 2015 and was modified on March 20,2015 which I assume is from a security update 2015-003.
My iPhoto Library was created March 22, 2012 and was last updated March 1, 2015. To the best of my knowledge, it has not been open since it was last updated. Unfortunately there are no current backups to the file.
When I launch IPHOTO the screen shows a rotating sprocket then after a period of time I receive a message:
Your photo library is either in use be another application or has become unreadable. Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your iPhoto library, to do this , quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
When I follow this am left with four items to chooses from: repair permissions, rebuild thumbnails, repair database, rebuild database. The first is selected and assume this is by default. I am not sure what the best choice is to select. Secondly since i have no backup of the file and I am not sure the file is corrupted, I started trying to create a copy on on an external drive however the file (192GB Size) new completes a copy routine. I considered a backup process which would take multiple hours.
Looking for direction.

1. make a back up. No matter how long it takes.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
2.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Safari will not open after update

After I updated to Safari 4, the program will not open!
I get a message that tells me that OS X 10.5.8 is not compatible with this new version.
I have read other posts with similar questions, and tried to see if I could find a crash report that could tell me some more about this problem - but the latest crash report is a month old, and I did the update a few days ago.
Does anybody know what to do?

Go to your Hard drive icon (upper right corner)
OPen it and go to the Applications folder.
Open that, and go down to Utilities.
Double click the Disk Utility folder.
In the resulting window, select your HD icon on the left hand upper side.
Then click on "Repair Permissions."
It might take a little while if you've never done it.
If it says "Repair Permissions Complete"at the end, you're good to go.

ITunes will not open after update to 11.4

I updated iTunes, along with the other updates I was prompted to install but now my iTunes will not open. At all. No error message or anything. Please someone help?
Thanks.

Hi Cchoe,
I see that you are experiencing an issue with iTunes after an update. It sounds like this issue could be related to third-party software interactions with iTunes. Here is an article that will help you troubleshoot:
iTunes: Troubleshooting issues with third-party iTunes plug-ins - Apple Support
https://support.apple.com/en-us/HT203395
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Word documents located in a sparse bundle will not open after update to Lion

I have several files of Word documents created by Office for Mac 2008. These files are located in two different sparse bundles for security. One sparse bundle is the original. The second sparse bundle is a larger maximum size that I copied the original Word documents into. My plan was to delete the original after I confirmed that the second larger one worked. After updating to Lion, I also uninstalled Office for Mac 2008, and installed Office for Mac 2011. Now when I try to open these Word documents, I get a message saying that Word cannot not open these documents because they may be in use or may have unacceptable symbols in the file name. If I control click on the documents, I can see the document in Preview but still cannot open in Word. In addition, I am able to open Word documents that are on my desktop. I tried moving my folders out of the sparse bundles by copying them to the desktop but this did not work either.
Help with this problem would be greatly appreciated.

ok i created a hello world app to try a nail down this issue.
i created the app with version 1.0.0
uploaded it to my server on the net.
hit the web address from my phone, downloaded and installed
then changed the version number to 1.0.1
uploaded this apk
downloaded and installed to phone
app would then open for sec then close
only fixable by clearing application cache.
I can't believe the answer to this problem is not available by googling it.
has no one else encountered this?
please help, i am scared to release any updates to my programs - massive influx of email from mad users who can not open there apps.

Bridge will not open after update.

Adobe Updater did its update and now Bridge will not open. The message is:
The Application Bridge CS3 quit unexpectedly.
I have had to uninstall Photoshop, reinstall photoshop, and then all is well until the Adobe Updater gets going then bang! No more Bridge. The below is the first part of the Apple report.
Any ideas??? Im running 10.5.5 10gigs of ram, on a 8 core Mac.
Process: Bridge CS3 [405]
Path: /Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/Bridge CS3
Identifier: com.adobe.bridge2
Version: 2.1.1.9 (2.1.1.9)
Code Type: X86 (Native)
Parent Process: launchd [94]
Date/Time: 2008-10-08 15:53:31.578 -0700
OS Version: Mac OS X 10.5.5 (9F33)
Report Version: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0

Routine maintenance is imperative.
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be.
I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
Repairing Permissions after the fact (i. e. not immediately before and after an install) seldom helps.; Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc
http://docs.info.apple.com/article.html?artnum=107388
Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
Also, from:
http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE:
There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
= = =
If you have DiskWarrior, run it regularly too.

ITunes will not open after updating

Ever since the update to 7.1.1 iTunes will not open.
I get a pop-up window that says iTunes has stopped working.
I have followed Apple's instructions for Vista about uninstalling all Apple products. I have done this 8+ times and I am at a total loss. I am a webmaster and Sr. Sys. Admin for a software company, so it's not like I don't have experience with computer/software issues.
When I look at the Windows application log. I have this error:
Faulting application iTunes.exe, version 7.7.1.11, time stamp
0x4890a5ee, faulting module kernel32.dll, version 6.0.6001.18000, time
stamp 0x4791a76d, exception code 0xc0000005, fault offset 0x000254d8,
process id 0xf44, application start time 0x01c8fb2e587a39a9.
This started happening after I updated.
No other issues with any other programs. Quicktime will start up and run.

I hear you. My itunes is fubared and Apple and ALL the articles they send do NO good. I have emailed Apple many times and nothing helps.
Whatever they changed with version 7.1 messed up itunes and you can't go back.
I have emailed Apple asking them if I can delete my itunes directory and any references to itunes and NOT lose my 10K songs. They havent responded to that email and my guess is that it will delete it. But Im not going to risk losing my library until I know for sure !
Im in the same boat you are, I dont want to lose my library either. APPLE NEEDS TO FIX THIS PROBLEM AND NOW !!
anyway this is a pain in the *** but itunes(windows) will open this way
UNTIL APPLE FIXES THIS !
1.boot up windows
2.right click on your START button
3.go to C:\ProgramData\Apple Computer\iTunes (my machine is a Dell with Vista)
4.go to the itunes directory C:\ProgramData\Apple Computer\iTunes\SC INFO
5.delete BOTH files SC info.sidb AND SC info.sibb
6.launch itunes, it should open, mine did.
7. if you have any purchased songs from the istore, log-in with your user name/password.
THIS WORKED FOR ME BUT YOU HAVE TO LEAVE YOUR ITUNES OPEN, IF YOU CLOSE IT OUT, YOU WILL HAVE TO REPEAT THE PROCESS AGAIN. (at least I did)
GOOD LUCK !!

Adobe Acrobat 6.0.1 will not open after update

I was prompted to add a patch to my Adobe Acrobat 6.0 running on a Mac OS X 10.5.8 After down loading the patch and installing, Adobe Acrobat will not open. A prompt comes up warning me; "The currently selected language resources are not supported by the current version of Adobe Acrobet. Please reselect the language in the international Systems Preference panel." I did this to no avail. Anyone else with this problem? Thanks!

Did the update info come from Adobe? In any case, you might try a repair (not sure how that is done on a MAC. You can also download updates from Adobe at http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Macintosh.

Adobe Form is not opening after saved the form locally

Hi Experts,
I have implemented the adobe form using webdynpro java using ACF. The scenario is initially the form is loading with input fieIds and dropdown boxes after that the form data has to be submitted into backend.
I have encountered the problem that if i save the submitted form into locally and trying to open the form its not opening.
The server and other details are:
NetWeaver - 7.00(2004s) SPS3
Adobe reader - 9.0
ADS vesion - 7.01
Please let me know if you have any idea.
Thanks!
Narasimha

1). If i will convert the forms from ACF to ZCI capability. Suppose if I want to fall back from ZCI to ACF forms then what is the solution for that?
Well you won't need to go back to ACF as such but if you want to then may be you can keep take backup of all forms.
2).After conversion of the forms to ZCI capability then what are the necessary steps i need to follow like abode form ui elements can be changed to webdynpro native ui elements type like that.
The Report generally mentions all the items in yellow/red for things to work on but yes if you have used ACF Controls you just need to update it by Native controls. From Web Dynpro form properties change the displayType property to native as well.

My apps will not open after updating to ios 5

My Iphone 4 will not open apps after updating to ios5.

If you search on google this is an old problem that many people have after upgrading devices and restoring from backups. If I can remember correctly, just re-sync the device in iTunes, and it should sort it out.

Browser is not opening after updating the os

Similar Messages

Maybe you are looking for