Browser is not opening from the webgui or SAP GUI for HTML

Hi Experts
I am in critical scenario how to work on the below scenario.
I have installed an NW7.0 with few functional components.as per the user request i had activated webgui and it is working fine in internet.for this we have done the following steps.
1. Activated the webgui/mimes in SICF
2. published in SE80 for WEBGUI and SYSTEM.
3. Created a reverse proxy in Micrsoft ISA through our network team for the internet users.
example : http://servername.xyz.com:8005/sap/bc/.../webgui
reverse proxy URL : http://sapabap.domain.com/sap/bc../webgui -- working URL
i could access sm50,sm21 and so..on.But when i try soamanager transaction or any other transaction which picks a browser and display the screen which is not working. It picks the intranet link or servername with port( http://servername.xyz.com:8005/sncrr or soamanager..).Is HTTPS is required to enabled ( ithink not necessary since it is an secured login procedure.) i could able to see in se80settingsITS Tab --servername.xyz.com:8005
May i know why it does not picks up the reverse proxy URL. I have tried with hosts file with many options but is it not working
Regards
Bala

Hi Bala,
If you go to transaction SE80 -> Repository Information System -> Other objects -> Transactions and you search for SOAMANAGER, you get into the screen where you can modify attributes for this transaction. Please check if there are strange values entered in there... Or maybe SAPGUI for HTML is not selected.
Kind regards,
Mark

Similar Messages

How to hide the menu bar from a Transaction iView (SAP GUI for HTML).

Hello all,
I have created a simple SAP Transaction iView of type SAP GUI for HTML. This iView has the Menu bar that has the buttons: Menu, Back, Cancel, and System. My requirement is, I dont want to see the menu bar that has these buttons. How do I go about it? Please advice.
Note: My iView is a SAP Transaction iView and not IAC service related iView.
Thanks
Vicky R.

You'll want to set the parameter ~webgui_simple_toolbar in your webgui service.
It is a binary parameter with the following values/options:
0 : Hiding the page header completely (not recommended)
1 : Standard setting
This is the recommended standard setting in which the title and the menu bar below it with the [Exit] and [Help] button and the application buttons are displayed.
2 : Displaying the title line
4 : Displaying the buttons [Exit] and [Help]
8 : Displaying the active system buttons on the screen ([Back] and [Cancel])
16 : Displaying the system menu
32 : Displaying the application buttons
128 : Deactivating the information block in the status bar (new)

Problem while printing from SAP GUI for HTML

Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
Reena

Hi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal

My preferences will not open from the apple menu.

My preferences will not open from the apple menu. Time machine will not open either. I've tried reinstalling Lion, to no avail. Has anyone else had this problem?

I have exactly the same issue. After FF upgraded on its own to version 5, it won't open from start menu, taskbar, desktop icon, or even by pressing firefox.exe in program files directory. It does so by pressing a link at msn messenger, inside Outlook etc.
Disabling all addons, didn't help. Moreover, I can't start FF in safe mode or start profile manager (Start > Run> firefox.exe -ProfileManager).
OS: Windows 7 64bit
Windows Event Viewer entry details:
Faulting application name: firefox.exe, version: 5.0.0.4183, time stamp: 0x4df95302
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x8c724fa6
Faulting process id: 0xc0c
Faulting application start time: 0x01cc37fe2fae7e8b
Faulting application path: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Faulting module path: unknown
Report Id: 6e7f03eb-a3f1-11e0-8f4d-a4badb0238f6

I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens. I trouble shoot it and it says incompatible application.

I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens. I trouble shoot it and it says incompatible application.

It sounds like an issue of trying to run XI on VISTA. That combination does not work. Info on both the Acrobat full version (including sub-version) and OS would help. It might also be an issue of running 11.0.0 on a system that needs the updates to work.

BBS BEX Query to R3 Transaction - Connect to SAP GUI for HTML not to R3 Backend-TA

Hi Experts,
I try to customize a report-report-interface from a bex query to R3 transaktion fs10n.
I configurated everything in TA RSBBS within BI.
When I start the BBS from the BEX Query a browser session opends, I have to enter the login data for the R3 system an SAP GUI for HTML is started.
Several years ago I tried the same and was connected directly to the Backend-Transaction within R3.
Was there a change within the last year?
Is it possible to configure somewhere in R3 or BW that I want to be tranferred to the Backend-TA and not to open a SAP GUI for HTML?
Can someone help?
Best regards
Mirjam
(SAP Netweaver 7.31 -> SAP ECC 6.0)

Hi Stephen,
You should try running one of these transaction iViews using Firefox and have Firebug installed (or use HTTP watch in IE). This might show you why the styles are not being loaded, it could be that since the upgrade something has changed in the SICF configuration settings that is blocking the download of the CSS... that is just a guess, but if you use a tool that will show you the HTTP traffic (like Firebug) then you might get a better idea of what is going on.
Hope this helps,
Simon

Right click not working in sap gui for html in transactions

Dear experts,
i m using sap gui for html in transations iview
but when i go to trasaction and click on some field automatically blank window comes(no any trasaction or no any field view)
it not happen on all the field but on some field for eg;- when i use tcode zhuct right click on first field works properly but other field not execp right click(blank window comes)
please help im in great problem.
due to this problem i am not able to impliment portal

Don't open 2 threads for one issue.
Anja Engelhardt
Moderator

Launch Approval Appraisal Documents in Iview format not SAP GUI for HTML

Hi,
Sorry iam not sure whether this is the right place to post this question.
I have a requirement where i need to change the appearance of UWL tasks related to appraisal approval.
Whenever a user clicks on approve apraisal tasks it is popping SAP GUI for HTML and taking to the backend showing Performance appraisal display.Our client are in need of normal iview rather than sap view( sap gui view).
I have identified the tasks related to approval appraisal.The tasks in the backend are
approval appraisal - perf appraisal - ts91000005, URL generation - ts12300108 , Submitted obj - WS 91000003.
i have created an iview based on http://xxx.xxxx:8000/sap/bc/bsp/sap/hap_document/documents_todo.htm?sap-client=xxx&sap-user=xxxx&sap-language=E
i have given the ID and iview PCD link in SWFVISU.Reregistered UWL again and logged in as a test user.When clicked on Appraisal approval i can see the appraisals completed.It wont allow us to edit.All hap_documents are BSP pages.
I guess i did something wrong.
i have followed these links.
http://wiki.sdn.sap.com/wiki/display/ERPHCM/PMSworkflowsin+UWL
Error: Launch appraisal Workitems in UWL in Portal...
Appraisal approval after completion not possible in BSP
Please let me know the procedure to show the approval items in a normal iview format.
Thanks in advance.
Chakri.

Chakri,
You will probably have to change the XML being used in your UWL. Go into the ItemType portion for the PM task and check/set the following properties
connector="WebFlowConnector"
defaultAction="launchIView"
Check if your Action tags within the ItemTypes have the following properties
name="launchIView" handler="SAPAppLauncher"
Check whether the Property within Action tags is linked to your BSP view that you want to trigger when the task is clicked
For e.g. <Property name="SAPIntegrator" value="ROLES://portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.pages/....."/>
Once you change your XML dont forget to re-register your ItemTypes to the connector you are using.
Good luck
Pooja

Image not displaying properly for SAP GUI for HTML transaction iview

Hi,
We have a sap gui for HTML iview for transaction REORRR in portal. After giving enough inputs this leads to Business Document Navigator screen(part of Document management) where i need to display a document(.jpg image in this scenario). When i double click on the image it is opening on the right side of the screen but in a compressed format where in we need to scroll down to see the image. But i would require the image to display with out scroll bar or in a new window.
When i change the format of the iview as SAP GUI for Windows the image is opening in a new window.
I would like to know whether there is any configaration settings either in portal or in Document management side. or is this any limitation of the SAP GUI for HTML scenario.
regards
Bharat.

Hi,
You can open this iview in a new window make the setting in the iview properties that will allow the iview to be opend in a new window.
Regards,
Vamshi.

The page cannot be displayed: ITS error: SAP GUI for HTML

Hello,
I have created an iView that connects with a ECC system. When I clic on System Administration --> Support --> SAP Application --> SAP Transaction :
System: ECC
Transaction: su01
SAP GUI Type: SAP GUI for HTML
It shows: The page cannot be displayed.
It's manadory to use SAP GUI for HTML. Please, Do you have any idea??
Thank you
Best,

Hello Virginia Rodríguez,
1)Kindly check that System ECC in Portal is Up and Running under System Administration.
2) if u r done with first step then can try SAP GUI for Window in creation of Iview
it will Work.
Regards.
Soni Vinit

I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available. Does not show up when I search for it. Plenty of memory . . .

I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated

Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D.

Firefox will not open from the start menu or the taskbar, but WILL open when called from Windows Live Messenger

This started a couple weeks ago, but doesn't seem to coincide with any other installations or reconfigurations, so I'm having trouble getting at the root cause.
The first time I run Firefox after installing, it runs fine (complete with a full list of add-ons.) If I then close FF and try to start it from the task bar or start menu, nothing happens. I've tried starting in safe mode (shift+FF), but get the same result. I've restored FF to all the default settings, disabled all my plugins and add ons, but no change.
The really odd part is that if I click the 'Inbox' link in my Windows Live Messenger, FF opens perfectly. This made me think that it was my homepage causing the issue, but A: I can go to that page without problems once FF has started from WLM, and B: even if I use the FF default homepage or google.com, I get the same problem. Furthermore, if I restart FF from within FF (like after I disable/enable an add-on), it will also start properly.
No crash report is generated by FF when it fails to load, but Windows catches the problem in it's event log. I've pasted the contents of that record at the bottom in the hopes that someone can take a stab at what's wrong.
Finally, I've already run through the online crash help, but everything is either not related (since FF will start if called indirectly) or has already been prevented (absolutely no add-ons are running at the moment.)
Event View Crash Report:
Log Name: Application
Source: Application Error
Date: 06/06/2011 7:29:50 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: UberHal
Description:
Faulting application name: firefox.exe, version: 2.0.1.4120, time stamp: 0x4da6a9fb
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x8d394fd6
Faulting process id: 0x1aec
Faulting application start time: 0x01cc24a1a155376a
Faulting application path: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Faulting module path: unknown
Report Id: df4396d9-9094-11e0-8761-0026180e006b
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-06T23:29:50.000000000Z" />
<EventRecordID>31380</EventRecordID>
<Channel>Application</Channel>
<Computer>UberHal</Computer>
<Security />
</System>
<EventData>
<Data>firefox.exe</Data>
<Data>2.0.1.4120</Data>
<Data>4da6a9fb</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>8d394fd6</Data>
<Data>1aec</Data>
<Data>01cc24a1a155376a</Data>
<Data>C:\Program Files (x86)\Mozilla Firefox\firefox.exe</Data>
<Data>unknown</Data>
<Data>df4396d9-9094-11e0-8761-0026180e006b</Data>
</EventData>
</Event>
Log Name: Application
Source: Windows Error Reporting
Date: 06/06/2011 7:29:56 PM
Event ID: 1001
Task Category: None
Level: Information
Keywords: Classic
User: N/A
Computer: UberHal
Description:
Fault bucket 2009598108, type 5
Event Name: BEX
Response: Not available
Cab Id: 0
Problem signature:
P1: firefox.exe
P2: 2.0.1.4120
P3: 4da6a9fb
P4: StackHash_0a9e
P5: 0.0.0.0
P6: 00000000
P7: 8d394fd6
P8: c0000005
P9: 00000008
P10:
Attached files:
C:\Users\MC\AppData\Local\Temp\WERD47E.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\MC\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_firefox.exe_966114b87f1ef26bf245bee89f49ab1bb58152f2_0c65eb58
Analysis symbol:
Rechecking for solution: 0
Report Id: df4396d9-9094-11e0-8761-0026180e006b
Report Status: 0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-06-06T23:29:56.000000000Z" />
<EventRecordID>31381</EventRecordID>
<Channel>Application</Channel>
<Computer>UberHal</Computer>
<Security />
</System>
<EventData>
<Data>2009598108</Data>
<Data>5</Data>
<Data>BEX</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>firefox.exe</Data>
<Data>2.0.1.4120</Data>
<Data>4da6a9fb</Data>
<Data>StackHash_0a9e</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>8d394fd6</Data>
<Data>c0000005</Data>
<Data>00000008</Data>
<Data>
</Data>
<Data>
C:\Users\MC\AppData\Local\Temp\WERD47E.tmp.WERInternalMetadata.xml</Data>
<Data>C:\Users\MC\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_firefox.exe_966114b87f1ef26bf245bee89f49ab1bb58152f2_0c65eb58</Data>
<Data>
</Data>
<Data>0</Data>
<Data>df4396d9-9094-11e0-8761-0026180e006b</Data>
<Data>0</Data>
</EventData>
</Event>

I have exactly the same issue. After FF upgraded on its own to version 5, it won't open from start menu, taskbar, desktop icon, or even by pressing firefox.exe in program files directory. It does so by pressing a link at msn messenger, inside Outlook etc.
Disabling all addons, didn't help. Moreover, I can't start FF in safe mode or start profile manager (Start > Run> firefox.exe -ProfileManager).
OS: Windows 7 64bit
Windows Event Viewer entry details:
Faulting application name: firefox.exe, version: 5.0.0.4183, time stamp: 0x4df95302
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x8c724fa6
Faulting process id: 0xc0c
Faulting application start time: 0x01cc37fe2fae7e8b
Faulting application path: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Faulting module path: unknown
Report Id: 6e7f03eb-a3f1-11e0-8f4d-a4badb0238f6

I have a I-MAC and have used firefox, but lately it will not open from the dock, any suggestions?

As stated above, have used Firefox from the dock for quite a long time, but recently it did not do anything when I clicked on it, just sat there. Have been able to get to it using spotlight, but even then have to go thru extra steps and go thru a step that says something like "this application was downloaded from the internet. Do you want to open it? YES/ NO " Any ideas ? Should I dump it and reinstall, and if so , how would I uninstall?

Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D.

Firefox does not open from the desktop icon!

I upgraded to the new one and tried to run once the install said finish. my addmin account will not open firefox but my guest acct does open it.

Have you tried: click Firefox button > New Tab > New Window '''''OR''''' CTRL+N '''''OR''''' File > New Window (if using the Menu Bar)
Once open, Firefox locks the Profile that is in use and you can not open another window with that Firefox version and Profile combination using the Windows Desktop icon or the Windows Programs list.

The user session for a SAP GUI for HTML could not be created/generated.

Hi,
May I know what could be the issue for the above issue?
We are trying to request for a ITS in a c#.net program with the following codes.
HttpWebRequest request = (HttpWebRequest)WebRequest.Create(strURL);
request.Method = "Get";
request.ContentType = "application/x-www-form-urlencoded";
HttpWebResponse response = (HttpWebResponse)request.GetResponse(); <<<<<< This line is throwing error >>>>>>
Stream responseStream = response.GetResponseStream();
However, in our legacy system of classic ASP script, we are not encountering any issues and manage to get the response from the ITS. Accessing the url on IE is also working fine.
set xmlHTTP = CreateObject("Microsoft.XMLHTTP")
xmlHttp.open "GET", URL , false
xmlHttp.send()
str = xmlHttp.responseText
Any help is much appreciated.
Thanks.
Bertina

From the little information available here I can suggest following:
1.     Check the Account validity and authorizations of the User used for authentication from DOT NET. If possible, assign SAP_ALL in Development and repeat tests. Later we can narrow down the access easily.
2.     There is a known Kernel issue with ICF logon message handling, described in SAP Note 1241566 - Set of corrections: Logging on 1/2008. Check if the recommended Kernel patch level is already applied.
If none of the above helps, please send me the following:
1.     Trace file for the work process 0 in transaction ST11 on the application server spsisd_ISD_00
2.     Generate trace files with the highest trace level (3) as per SAP Note: 507994 - Generating plug-in trace files for troubleshooting and send it over.
We can look at various Kernel and Service level calls from trace files which should help us identify the root cause.

Browser is not opening from the webgui or SAP GUI for HTML

Similar Messages

Maybe you are looking for