Browser issues - Cisco CallManager GUI

I'm new to the forum so firstly let me say hi!
I recently got a new iPad 2, absolutly loving it. However I have one major issue.
I am a cisco voip engineer, and aqs such I need to log into my CallManager servers through the browser for the GUI interface. Through safari, and many other browsers I have tested, I can connect, login and start to work.
The issue I have is that only what is viewable on the screen is available, if the page being viewed is outside the current viewable screen area, those areas of the wb page are not available. There are no scroll bars on the side to scroll up and down on th web page.
Has anyone else experinced anything like this before, if so is there a sollution to resolve this issue?
I hoping this is not to much of a major probolem.
Thanks in advance
iCWS

You should be able to scroll the screen in those areas if you use two fingers on the screen when swiping.

Similar Messages

Using a Mac, Firefox does not allow me to use the vertical scroll bar real-time in Godaddy webmail. It lags and jumps. Godaddy says it is a browser issue. Does not happen in Safari with Mac OS 10.4.11 or on PC w/windows vista.

The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
== URL of affected sites ==
https://login.secureserver.net/index.php?app=wbe&clearcookies=1

The problem is not my server (Comcast) as it does not happen on Safari when trying different websites as well as Godaddy.com or my Godaddy webmail. The problem is only when using my Mac OS X 10.4.11 (not my Windows Vista PC) in Firefox. I only began noticing this recently. Godaddy says this is a browser issue with my Mac as they cannot replicate it.
== URL of affected sites ==
https://login.secureserver.net/index.php?app=wbe&clearcookies=1

Nokia 500 and Belle Refresh: browser issues.

Greetings.
The Belle Refresh was indeed a welcome refresh for this low-to-midrange phone. However, there is a serious issue with the browser.
With the update to Qt 4.8, you inherited QtWebKit, an amazing browser I know very well. In a desktop, it's fast, although it eats more memory than Firefox. However, in a cell phone like the 500, with limited amounts of RAM, this browser freezes the phone, due to the lack of memory. I'm also sure this browser can and will break phones with more memory and Belle FPx, since I've made QtWebKit use more than 1 GB of RAM in a computer running KDE.
There is a way to avoid this, called "user agent". Opera Mobile avoids this scenario by telling pages through user agent "hey, don't be hard on me, I'm browsing this from a cell phone", and pages adjust themselves to that scenario. However, you didn't tweak the user agent in your browser.
If you add no user agent tweaking, full HTML5 support, Flash Lite support (the much higher specced iPhone 4S doesn't support Flash), and low memory, you get a nightmare scenario.
1. The webpages send their complete, full featured DESKTOP versions to my Nokia 500.
2. QtWebKit supports everything, so, it makes a faithful attempt to properly render the page, even with Flash apps.
3. Nokia 500 has only 70-80 MB of RAM free for apps to use.
4. Boom.
Can you release a hotfix for Belle Refresh, changing the user agent of Nokia Browser to something that can trigger the mobile version of web pages? In that scenario, QtWebKit will eat much less memory and everyone will be happy. And please, can you do this for everyone using Belle Refresh?

I can confirm serious browser issues with the Belle refresh on a C6-01 device. The crash is so severe that only taking out the battery helps. It typically occurs when scrolling larger, feature-rich (and image-rich) webpages, so far I've seen this only on mobile connections (Edge, Umts), but that may be due to lack of testing with WLAN. (Where I've got WLAN I've usually a more powerful device as well..

IWeb pages reverting to older version- not a browser issue, deleting prefs/caches no help

Hi everyone, forgive me if this is a newb question but I've scoured the internet for answers and all of them I've already tried with no luck. I'm using iWeb and encountering a problem that has me completely stumped. I'm trying to publish changes to my site, (I do not use mobileme, I publish to disk and upload files via Fetch) and for some reason something is changing my html files when I try to upload them. The html files are correct on my hard drive when I publish them, and yet when I upload them, they revert to the older version. This is not a browser issue, as I've cleared my cache, refreshed and tried using Safari, Firefox and Chrome with no luck. I've also tried 're-setting' iWeb by deleting iWeb preferences/cache, and tried moving the domain file from application support, creating a new website, deleting it and then re-loading the old site. Nothing, still the old site. It's new in iWeb, new when I open the html files on my drive, and old as soon as I upload.
I seem to remember having this problem before, and what I found was iWeb's cache kept replacing my new pages with the old ones every time I wanted to upload them. 'Re-setting' iWeb did the trick then, but it's not doing it now. Any ideas on what is going on? It's a little disconcerting seeing a file correct on the disk and then change itself, while uploading, into an incorrect version.
Using:
iWeb 3.0.3
Mac OS 10.6.7
Mac Pro 2.66 Dual core

If you make changes to a page there are files in the Scripts folder that get updated and must be uploaded also. Depending on what you're using to up load the files it can be setup to upload just those new or modified files.
Cyberduck is a free FTP client that works very well and if used in conjunction with this tutorial will upload only those new or modified files: #2 - Uploading only those new or newly edited and published files when using a 3rd party FTP client
OT

Upgrade to ECC6 & Unicode: IE Web Browser Issues?

Has anyone experienced web browser issues at display time? We are on IE7. We are now using the internal ITS. Our carriage returns are totally being ignored by the browser. Thus, we have a dropdown box to pick one of the businesses multiple partners, and because the HTML is not formatted correctly in the browser, the dropdown doesn't work, and we get an "array not created" error messsage in IE7.
I know that there are options in the IE 7 browser under the menu item "view". I've tried changing these to some different Unicode settings, but without luck.
Has anybody some experience with this issue?
Thank-You

Hi Tim,
this might be problem with Support package, by default Sap neweaver 2004s application comes with SP6, u can upgrade to higher SP to solve these type of problems.patch your system up to SP12 or SP13 and try.
Thanks & Regards,
Manikandan Dhanakoti
Edited by: Dhanakoti.M on Oct 23, 2009 7:45 PM

Upgrade to ECC6 & Unicode Passing HTML to Browser Issue?

Has anyone experienced web browser issues at display time? We are on IE7. We are now using the internal ITS. Our carriage returns are totally being ignored by the browser. Thus, we have a dropdown box to pick one of the businesses multiple partners, and because the HTML is not formatted correctly in the browser, the dropdown doesn't work, and we get an "array not created" error messsage in IE7.
I know that there are options in the IE 7 browser under the menu item "view". I've tried changing these to some different Unicode settings, but without luck.
Has anybody some experience with this issue?
Thank-You

You mean hex stored as string (0-F)?

Cisco CallManager RisPort Problem

Hi All,
In my company we are upgrading Cisco CallManager 4.1 to 5.0,In ccm5.0 How to get the Real Time Information(like Ip address of the Phone). iam using SOAP to interact with CCM 5.0 if anybody worked on this , please send me the sample code for this it is very useful for me
Thanks in advanced
Regards,
Ravindra
my personal mail id:[email protected]

Create the CDR database manually by following the steps below:
Go to Start --> Microsoft SQL --> sql query analyser
Click on file -- open --- goto c:\program files\cisco\bin\ ---- select CDR --- click open and execute the sql query
Then try to install CAR again.
HTH
//Jorge

UCCX 7.0 CAD integrated browser issue

Dear Networkers,
We have UCCX 7.0 installed.
When openeing the CAD Desktop Workfow Admin > select the default workflow> CAD Agent > User Interface
We can't find the "Browser Setup" tab so that we can enable the integrated browser !
For CAD-BE we could find the tab, but for CAD Agent we could not !
It's really strange !
Can you please advise ?
thanks in advance.

Hi ,
Could you attach the screenshot of the same? What license you have for UCCX?
Integrated multitabbed browser comes only with UCCX Premium licensing package.
Please refer the "Table 1.Feature Content for Cisco Agent Desktop Software Packages" in the below link.
http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps427/data_sheet_c78-584241.html
Each Standard seat license provides for concurrent operation of:
• Cisco IP Phone Agent
• Cisco Supervisor Desktop
• Cisco Desktop Administrator*
• Cisco Desktop Work Flow Administrator*
Each Enhanced or Premium seat license provides for concurrent operation of:
• Cisco Agent Desktop, Cisco IP Phone Agent or Cisco Agent Desktop - Browser Edition
• Cisco Supervisor Desktop
• Cisco Desktop Administrator*
• Cisco Desktop Work Flow Administrator*
*Only one administrator can view or edit data in it at any one time.
Hope it helps.
Anand
Please rate helpful posts !!

Yahoo Homepage is in EST and not PST like my seetings are in. It changes to the next day when it is not midnight yet. Please fix. Yahoo say it is a browser issue!

On the Yahoo Homepage the day, date, and time are in EST and I am in PST. The day, month, time, and date, changes to the next day at 9pm and it is not midnight yet.
Example: Monday, February 13, 2012, then at 9pm tonight, it will change to Tuesday, February 14, 2012, before it hits midnight on Tuesday, February 14, 2012. Please fix.
I have been in contact with AT&T and Yahoo for the past month trying to get this fixed so it doesn't affect my e-mail time. Now both are saying it is a browser issue, and that is you guys. I can't believe I am going through all this just to get something fixed....it is amazing! Our e-mail is:[email protected]
Thanks,
Tim

Try http://kb.mozillazine.org/Time_and_time_zone_settings

Browser issues in DW

Not a whiz in DW but created a site and found that the logo only shows up in some browsers. How do I fix that in DW since the previews all showed fine? It's apparently a PC browser issue. Any fix for it?

Your logo is way too big for the web.
592.47 KB (606694 bytes)
360px × 291px
(scaled to 200px × 155px)
Open logo in your favorite image editor.
Resize to actual height & width needed for your page(s).
Save for Web as an optimized jpg. Use the smallest file size necessary for the job. 20 - 50 KB tops.
Upload to server and test in browsers.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Safari Browser issue on Mac with crystal report viewer JSP

Safari Browser issue with crystal report viewer JSP
This is my configuration:
Operating System : Mac X
Browser : Safari Browser 3.1.4
Crystal Report : XII Release 2
Application Server : Jboss 4.2.0
I am using the following code to view the crystal report in jsp.
<%@ page import="com.crystaldecisions.report.web.viewer.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource" %>
CrystalReportViewer theViewer = null;
ReportClientDocument document = null;
IReportSource reportSource = null;
theViewer = new CrystalReportViewer();
reportSource = document.getReportSource();
reportSource.refresh();
theViewer.setReportSource(reportSource);
theViewer.setOwnPage(true);
theViewer.setHasExportButton(true);
theViewer.setHasPrintButton(true);
theViewer.setHasRefreshButton(true);
theViewer.setHasLogo(false);
theViewer.setEnableParameterPrompt(true);
theViewer.refresh();
theViewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
theViewer.dispose();This code is working fine when the browser is IE or Firefox on Mac X.
But it is giving me error message when the browser is Safari on Mac X.
If there is no parameter in the report then the error message is:
Null Totaller
If there is parameter in the report then the error message is:
Parameter prompting is not supported
Please Help.
Thanks
Edited by: VINCEJOHNSON on Jul 30, 2008 7:11 AM

I am having this exact same issue, only on an ASP.NET page. I can print the report, but it does not display at all.

5.0 not able to be recognized on a website, browser issue?

5.0 not able to be recognized on a website, browser issue?

I replied over here: https://support.mozilla.com/en-US/questions/846836

Cisco CallManager 4.1

Hello.
I am sorry for bad English. At me such question:
As in "Cisco CallManager 4.1" in "Device Defaults Configuration" to add phone support cisco 7925
By default such support is not present, it is possible to look a picture in an investment.
Thanks

Greetings.
Yes, on tftp all is good, all files for an insertion 7925 are present. Here the list of files: CP7925G-1.3.2.LOADS, TNUXH-1.3.2.SBN, TNUXRH-1.3.2.SBN, SYSH-1.3.2.SBN, WLANH-1.3.2.SBN, APPSH-1.3.2.SBN, GUIH-1.3.2.SBN.
In adjustment «Device Defaults Configuration» under cisco 7921 has substituted file CP7925G-1.3.2.LOADS, does not work, on phone the message «failure of updating of microprocessor maintenance» stands out
And devices cisco 7921 at reboot begin перепрошиваться under 7925 but too there is an error.
While leaves nothing!!!.
Like all I do correctly.

Cisco CallManager 5.x Service Parameters

Nothing shows in Cisco CallManager Service Parameters when a service is selected (CM, Attendant Console, etc.). Has anyone seen this before?

Yes, the CM was setup by another vendor and has been running for a while. We will probably schedule a reboot, but I wanted to be sure there wasn't something else I could look at first.

Cisco CallManager Installation

As new in Voice Networks, I have a question ! Is Cisco CallManager Solution must be installed on designated / cisco recomended hardware. I want to try it before going a head with buying stuff. Can i install it on my server machines with Windows 2000 Server ??
If any one was successfull please let me know.
thanks,
Shakeel

This is how to get CallManager 4.1.3 running on non-MCS server.
1. Install Windows 2000 server (15 gig partition). Make all passwords the same, including WIN2K account. (I used " cisco" )
2. Keep all the default installation components,
just add DHCP under Network Services,
and SNMP under Management and Monitoring tools.
3. Assign a static IP.
4. If installing in VMware, install VMware tools (under the main VM tab ) .
5. Install SP3 (at-least). (or make an win200 boot CD yourself with slipstream( google: XP slipstream)
6. Setup DHCP scope and options, don't forget to add the CISCO TFTP option 150
7. Copy the text below into a text file and name it with a .reg extension,
double click this file to make the changes to the registry.
7a) ccmreg1.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7825H02"
"Speed"="2268"
"Memory"="2048"
[HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image]
"Version"="2000.2.6"
[HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Service Release]
"Version"="2000.2.6sr5"
7b) install win-OS-Upgrade-K9.2000-2-7.exe
7c) ccmreg2.reg
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7825H02"
"Speed"="2268"
"Memory"="2048"
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Spirian]
"ProductKey"="BTOOVQESCCJUIEBI"
"Deployed"="0000000000000000"
8. copy c:\program\cisco\updates\2000 2.7sr5\shutdown.exe naar c:\utils
9. Install CallManager 4.1(3)
ccmsetup.exe
10. Go to Start >> Programs >> CCM 4 >> CallManager Administration and IE will open.
11. Go To Menu >> Application >> CCM Serviceability >> Tools >> Service Activation.
>>Click> on server u want to configure on left hand side.
>>Click> "Cisco RIS Data Collector" and press update.
>>Click> on all the services one by one and press update.
12. You should now have CallManager 4.1(3) running.
13. Upgrade OS and CCM with all patches if needed.
14 you can use P2V to make an copy of an working CM to a VMware machine

Browser issues - Cisco CallManager GUI

Similar Messages

Maybe you are looking for