Browser not displaying pages

when i try to load any page - including BB help, yahoo, imdb - all that have worked previously - the page says it is loading but nothing happens.
i have tried reloading BB but nothing works - please help

Hi and welcome to Apple Discussions,
From the Safari Menu Bar click Safari/Preferences then select the Appearance tab.
Click the pop up menu at the bottom of that pane where you see "Default encoding"
Select: Western (ISO Latin 1)
Relaunch Safari.
See if that helps. If not, reply and we'll keep trying.
If you have installed any 3rd party fonts, that could be causing the glitch. Try logging in to another user account, launch Safari and see if the problem persists there.
Carolyn

Similar Messages

Safari will not display pages

I recently updated to Mountain Lion on my late 2010 MacBook Air. Today, I attempted to use Safari and I can get no page to display. Safari itself loads, but no pages will load. I use Chrome as my default browser and only pull up Safari occasionally, so I can't say for sure that I have used Safari since the upgrade, however, I probably have.
Today, I was invited to a Go To Meeting online meeting. I opened the page in Chrome and it downloaded the GTM app. I clicked on that and it tried unsuccessfully to download required files from it's server via it's own app. I tried this several times without success and then thought to try the entire process using Safari. That is when I discovered that Safari would not display pages. It acts as if it has no connection to the internet. Safari loads and the progress bar moves a little across the top then it just stops. It never times out or complains; just nothing.
Given that the GTM app looks also like it cannot connect to the internet, I went looking at some of the suspects. My firewall is turned off. My network status comes up clean when I test it. ...and more oddly, Chrome seems to have no problems with any and all pages.
I searched for similar problems with solutions and one recommendation was to boot into safe mode to see if that made a difference. I did that and there was no difference. Since I don't use Safari routinely, it is stock, as delivered.
Any ideas for how to troubleshoot this?
Thanks,
Bill

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ Proxies. If any proxies are selected, deselect them, apply your changes, and try again. You must apply the changes before they take effect. You don’t need to change the other settings.

Design View Not Displaying Pages with any Formatting

I asked this question in another thread and somebody locked it. The question is not answered. My Design view is not displaying my files with any formatting. I can view them in a browser, but not in Design view where I can see my work as I'm working. While I can upload files to the remote server (host provider) the links got screwed up so files on the remote server don't show any formatting either. Every link, thousands of links, are off by one word (folder) from where my site was residing on my hard drive. When I try to make a change to the links manually then I can no longer view them with any formatting in my own browser either.
On my local broswer on my PC the address line reads: http://localhost/folderNameIneedToDelete/filename.php
On the live website (for my homepage) the address line reads http://websiteName.com/folderNameIneedToDelete/index.html
(Here is the text from another thread that was improperly locked)
I just added a remote server to my site so I could begin uploading files to my host provider. When I saved the setup I saw a message popup about the cache changing. Now when I try to view a file in Dreamweaver in Design View it doesn't recognize any of the external style sheets. It displays with no formating.
I can still view the pages in a browser and they look appropriate, just not in Design View where I can continue working on the site as I've been doing.
How do I get Design View to display my pages properly again using the .css pages that apply to each page design?
Thanks,
Robert

Murray, thanks for all your assistance.
Before I edit thousands of links again I want to confirm I've interpreted all your info correctly. If I setup everything as follows all my pages should work in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and most importantly in a live environment at a host provider:
Site Setup
Site - Site Name: anything including spaces
Site - Local Site Folder: C:\wamp\www\rootfoldername\
Servers - Testing Server (Testing: checked)
Server Name: Testing Server
Connect Using: Local/Network
Server Folder: C:\wamp\www\rootfoldername\
Web URL: http://localhost/rootfoldername/
Remote Server - Maintain synmchronization information: checked
Remote Server - Automatically upload files to server on Save: unchecked
Remote Server - Enable file check-out: unchecked
Testing Server - Server Model: PHP My SQL
Version Control - Access: None
Advanced Settings - Local Info - Default Images Folder: C:\wamp\www\rootfoldername\_images\
Advanced Settings - Local Info - Links relative to: Document
Advanced Settings - Local Info - Web URL: http://sitename.com/
Advanced Settings - Local Info - Case-sensitive links checking: unchecked
Advanced Settings - Local Info - Enable Cache: checked
Advanced Settings - Cloaking - Enable Cloaking: checked
Cloak files ending with: unchecked
Advanced Settings - Design Notes - Maintain Design Notes: checked
Advanced Settings - Design Notes - Enable Upload Design Notes for Sharing: unchecked
Advanced Settings - File View Columns - Name: Built In - Show
Advanced Settings - File View Columns - Notes: Built In - Hide
Advanced Settings - File View Columns - Size: Built In - Show
Advanced Settings - File View Columns - Type: Built In - Show
Advanced Settings - File View Columns - Modified: Built In - Show
Advanced Settings - File View Columns - Checked Out By: Built In - Show
Advanced Settings - Contribute - Enable Contribute compatibility: unchecked
Advanced Settings - Templates - Don't rewrite relative document paths: checked
Advanced Settings - Spry - Asset Folder: C:\wamp\www\rootfoldername\SpryAssets\
Site File Structure - place files in the following folders:
C:\wamp\www\rootfoldername
webpages (html & php)
_images - [folder] (there are numerous image folders beginning with _images) containing .jpg and .png files
_includes - [folder] containing attached .php files for the header, navigation and footer attached to every page
_scripts - [folder] containing .js script files
_styles - [folder] containing .css files (external style sheets)
Connections - [folder] contains one php file (databasename.php)
SpryAssets - [folder] containing system generated .js files .css files and .gif files
ZendFramework - [folder] - I have no idea if the files in this folder are necesary and why it was placed here many months ago
** Links **
Remove the leading / from every link in every file
HTML5 shiv
using an external link will always reflect the latest changes(Question) - If I link to this .js file externally at google instead of linking to a current copy in my _script folder could future changes to this external .js file cause future problems with the webpages that have this file attached?
Remote Server
Setup a remote server using the ftp address settings provided by the host provider. (Question) Any settings defined for the future Remote Server (the first remote server was deleted when problems occured) will not cause any harm to anything involving the Testing Server such as viewing webpages in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and will not cause any harm to any files eventually put to the host provider via that future Remote Server. Is that correct?
Murray, thanks again for your help,
Robert

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly.

Hi everyone,
I posted this in September: "Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated."
I got one response from that posting, suggesting that the pdf was corrupted over email. That wasn't the problem.
What I didn't say above is that whenever I got an error message upon opening the pdf and clicked OK, I got another message: "Insufficient data for an image." I found that one or all of the images in the pdf were missing. Upon further investigation, the contractor and I found that sometimes the error message pointed to a specific font used--that being a Helvetica Bold font. Once we substituted it with a Helvetica Neue LT Std Adobe Opentype font, we no longer had an issue.
However, the problem rose it's ugly head today--what, 6 months later! I'm talking about 2 different pdfs this time.
For PDF#1, I got this error message about the font: "Cannot extract the embedded font 'JNAGNS+HelveticaNeueLTStd-Bd'. Some characters may not display or print correctly." When I click OK, I get another: "Insufficient data for an image." The images don't show up in the pdf. What I don't understand about this pdf is that this is one of those that was fixed in September. The only changes made in the document was to paragraph text--none to the text in the images. When I opened the revised pdf today, I am getting the same message again. This makes no sense.
I returned to my September blog to see if any further advice had been posted, but nada--not even anything from Adobe about it. I goggled until I found where someone suggested running a "Report PDF syntax issues" analysis in Preflight. I did that and even though the analysis showed the pdf passed, I checked the fonts in the list and saw that the one pointed to in the error message showed that a long list of glyphs were missing on both pages of the pdf. I have asked my contractor to replace her font with a new one, in case it has gotten corrupted. Haven't a new pdf to open yet.
Then when I opened PDF#2, I got the message: "An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." When I ran the "Report PDF syntax issues" analysis in Preflight, I found got this warning: "Invalid operand(s) for operator (1 match on 1 page)". I clicked through and under "Page Description Errors/Invalid operand(s) for operator", it identifies Operator Name, Stream State, Operators Read, and Traversal Path. Under "Trigger Values" is says "Invalid operand(s) for operator: is true". None of this means a thing to me so I can't figure out what the problem is.
Let me say this: Both the contractor and I are using CS5 and Acrobat Pro 9, on Lion. If it helps, the contractor also sent one of the problem pdfs back in September to my boss who is running Acrobat Pro 9 on Windows 7 and she got the same messages.
Does anyone out there have a suggestion for us? PLEASE HELP!!!!

Thanks to all for posting suggestions. As it turned out, the contractor who was having a problem reinstalled Acrobat 9. She works from home and is emailing the pdfs to me. Things were running smoothly until this past week, when the problem started again. Whenever I get a pdf that won't open properly or print, I asked her to zip it and it is no longer a problem. Last week, I had the same problem start with a contractor in Florida and she also zips the pdf when there is a problem. Now I am thinking the problem might be at my end. I wonder if something is happening to them when they come through our firewall at work. I asked IT about it before but they didn't have a clue what the problem might be. Right now, zipping is the answer...who knows how long that will continue to work.

Cross References Will Not Display Page Number

Got some documents created in InDesign CS3 (MAC). When bringing them into CS4 (Windows) and trying to create a paragraph cross-reference the page numbers will not display. All the other text in the cross reference ("paragraph", the word "page", etc.) displays correctly. Even the cross reference under the "hyperlinks" toolbar shows nothing (instead of the usual # indicating a page number).
However If I copy some of the same pages into a new document and create a cross reference in it the page number displays correctly. But since it's over 300 pages I really would hate to have to do that!
Any ideas?

Is it maybe because CS3 does not include the cross references function (not a feature until CS4)?
That's a real problem if we use an outside source to create a lot of our documents and they're working in a previous version.

Webi Page View Not Displaying Page Size Correctly.

Hi Everone,
I have an issue with one report where the page size sttings do not translate when viewed in HTML Page View.
Figure one is the report as seen in the editor - as you can see the page is displayed correctly - A4 Portrait:
And, when the report is viewed in PDF mode - again, no issues:
But when viewed in HTML page view - it blows out the width of the page:
Now this report, as far as I can tell, is set up no differently than 6 others that are designed to be printed as PDF, all of which do not display this behaviour.
We design them to be printed as PDF but present them to the user in HTML Page view in order to allow injected JavaScript’s in the report to be run. This does not happen when you jump directly into PDF mode.
I have checked in design view and I don't have any wayward report elements pushing out the width and the PDF renders correctly which would not happen if there were hidden elements causing issues, it would render a bunch of blank pages.
So, I am at a loss. The page view is correct in edit mode and in PDV view mode but not in HTML page view. Has anyone else had this issue? I can’t work out why this happens only in one report when all the others work properly.
HELP!!!
- Nick

Hi,
I think it may be <div class="html5gallery-viral-0"> (contains the social media buttons) // screencasteu.worldsecuresystems.com/AP/2013-08-01_1033.png
It's the only element that isn't in sync with the other elements on page, when compared to home.html for example.
Kind Regards,
Alex Pavelescu

Acrobat 9 Pro: Message "An error exists on this page. Acrobat may not display page correctly. Please

Over the past week, I have received pdfs from 2 different graphic design contractors that do not open correctly in Acrobat 9 Pro. There is an error in the document and when I scroll to the page where the error is, I get: An error exists on this page. Acrobat may not display the page correctly. Please contact the person hwo created the PDF document to correct the problem." I did this, and the contractor remade the pdf 3 times, and I still couldn't open it. This contractor is already using CS5. For the problem today, I haven't asked for it to be remade yet--decided to see if I could find out if anyone else is having the same problem. The second contractor is using CS4. The only thing that I have done differently at my end over the past week is upgrade CS4 to CS5. I already had Acrobat Pro 9 so I didn't update it when I updated my CS5 products. Should I have upgraded Acrobat 9 anyway? Somehow, it doesn't feel right that this is the problem. Any info on this would be appreciated.

Thanks for the quick reply. Would zipping the pdf protect it through email...like I said, this is the first time I've had this problem and I've been getting pdfs though email for years.

Firefox 3.6 does not display pages correctly

I recently upgraded to 3.5 beta 4 and it worked ok. 2 weeks ago it stopped displaying pages correctly. Uninsalling and reinstalling did not cure problem. I unistalled and installed v3.6. Same problem.
I could provide a screenshot of Mozilla home page. Backgrounds, table borders and some inages to not display. I have disabled all plugins and "load images automatically" is checked.
The images and background of this page do not display. I checked with K-meleon and IE.

If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
On other platforms instead of Tools > Options use:
*Mac: Firefox > Preferences
*Linux: Edit > Preferences
*Windows: Firefox > Options
Press F10 if the menu bar is hidden on Windows and Linux or use "Firefox > Options/Preferences"

ASControl JNDI Browser not displaying the JNDI tree (10.1.3.2)

We're running OC4J 10.1.3.2 on JDK 1.5.0_06
We have a problem that when we try to access the JNDI Browser on any of the instances that we have created,
the JNDI Browser always displays "No Properties Found".
I have created an instance named "web" and the default "home" instance exists. ASControl is running in the home instance.
When we access the JNDI Browser in the home instance, everything works correctly.
When I access the JNDI Browser in the web instance through ASControl, I see the following exception in the opmn/logs/default_group~home~default_group~1.log,
07/05/23 09:55:22 java.lang.UnsupportedOperationException: This part of the API is not supported
07/05/23 09:55:22 at oracle.oc4j.admin.jmx.distributed.SimpleInstanceMBeanServerDelegate.queryMBeans(SimpleInstanceMBeanServerDelegate.java:522)
07/05/23 09:55:22 at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.queryMBeans(LocalizationFilterMBeanServer.java:420)
07/05/23 09:55:22 at oracle.sysman.ias.studio.jmx.spi.JMXConnectorImpl.queryMBeans(JMXConnectorImpl.java:346)
07/05/23 09:55:22 at oracle.sysman.ias.studio.j2ee.userdefined.jndi.JndiHGridOC4JModel.getJndiTree(JndiHGridOC4JModel.java:164)
07/05/23 09:55:22 at oracle.sysman.ias.studio.j2ee.userdefined.jndi.JndiHGridOC4JModel.getJndiTree(JndiHGridOC4JModel.java:134)
07/05/23 09:55:22 at oracle.sysman.ias.studio.j2ee.userdefined.jndi.JndiGridHelper.createHGrid(JndiGridHelper.java:421)
07/05/23 09:55:22 at oracle.sysman.ias.studio.j2ee.userdefined.jndi.JndiGridHelper.prepareData(JndiGridHelper.java:357)
07/05/23 09:55:22 at oracle.sysman.ias.studio.sdk.AbstractController.prepareData(AbstractController.java:875)
07/05/23 09:55:22 at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:391)
07/05/23 09:55:22 at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765)
07/05/23 09:55:22 at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283)
07/05/23 09:55:22 at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:297)
07/05/23 09:55:22 at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
07/05/23 09:55:22 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
07/05/23 09:55:22 at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
07/05/23 09:55:22 at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75)
07/05/23 09:55:22 at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
07/05/23 09:55:22 at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85)
07/05/23 09:55:22 at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
07/05/23 09:55:22 at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80)
07/05/23 09:55:22 at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
07/05/23 09:55:22 at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68)
07/05/23 09:55:22 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
07/05/23 09:55:22 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
07/05/23 09:55:22 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
07/05/23 09:55:22 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
07/05/23 09:55:22 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
07/05/23 09:55:22 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
07/05/23 09:55:22 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
07/05/23 09:55:22 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
07/05/23 09:55:22 at java.lang.Thread.run(Thread.java:595)
In the web instance, if I invoke the "getAllBindingsAsXMLString" operation on the oc4j/J2EEServer/JNDINamespace/JNDINamespace node through the system MBean browser, I can then see the contents of the JNDI.
Any help with this problem would be greatly appreciated.

I have the same problem.
Also on OC4J 10.1.3.2 and JDK 1.5.0_06
Any help would be welcome

Equium M50-164: IE not displaying pages correctly

I have a Toshiba new Equium M50-164, but it will not display my internet page correctly at http://myweb.tiscali.co.uk/lorne.anderson/Bridge/
It should look like this:
http://myweb.tiscali.co.uk/lorne.anderson/NormalView.gif
with the Bridge anaylser logo in the header but on my Toshiba it looks like this:
http://myweb.tiscali.co.uk/lorne.anderson/ToshibaView.gif
I have 4 other computers that all display it correctly (running XP,2000,98SE) and several friends say they can see it OK. If I look at the unlying html code via right click and view source in IE the bit that displays the logo should read:
"align="left">
</td>
<td width="610" align="center" height="65"><a href="../index.html" target="_blank"><img border="0" src="Images/Bridge%20Analyser.gif" width="311" height="57" align="left" alt="Opens my software home page to see more programs">
</a>

<a href="../index.html">
but on the Toshiba view source displays:
"align="left">
</td>
<td width="610" align="center" height="65"><a href="../index.html" target="_blank">
</a>

<a href="../index.html">
Note the 2 blank line where the code to show the logo should be. If I open the page from files on my hard disk it display correctly so my guess is that Toshiba have done something to overide default IE security settings but I can't see what. How can I get IE on my Toshiba to work the way Microsoft designed it to work?
Just as a check, can anyone using this forum read the page correctly or do you also get the missing logo?

Out of curiosity are you running any toolbars, add-ons or content filtering for IE?? As you pointed out the source code isn't the same as the original it's been altered and since the <IMG> html tag is missing that would explain why Internet Explorer isn't loading the image.
I can't see anything particularly wrong with the code however your filename does have a space in it "%20" and might be triggering some kind of content filtering.
As a suggestion rename the image file removing the space then update your html page and try again.
Richard S.

Version 4.0.1 is not displaying pages like version 4.

Since upgrading to Firefox 4.0.1 I have seen problems with some pages displaying. I am a web designer and pages that are error free which displayed fine in version 4, and work in Chrome, Safari and versions of IE, are not display properly in the new updated version of Firefox.

Add a style rule clear:both to the DIV .center
<pre><nowiki>.center { clear:both; }</nowiki></pre>

ITS service not displaying page in web browser from trnx SICF

Hello gurus
iam having a problem when trying to test ITS fro trnx SICF.The web browser window pops up but it doesnt display anything.The service is active and running.
i checked at os level in dev_icm log file and found the following error:
[Thr 5] Mon Oct 25 10:30:52 2010
[Thr 5] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 22;10.26.24.44:1090) [nibuf.cpp 4611]
[Thr 5] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2340]
that is the link that is suppossed to be opened in the web browser ::http://lmntrst01.ba.bc.test123.com:8000/sap/bc/gui/sap/its?sap-client=666
Has anyone faced a similar problem before.It ERP 6 EHP4 on Solaris SPARC
Any ideas are most welcome

Hello,
Please see note 816973 to clarify some basics first. Especially steps 3 - 6.
Also, the URL you posted has no service name and would lead to an error anyways, you should test with WEBGUI or IT00 or some other service.
Edgar

Not displaying pages correctly in DW

I'm a new Dreamweaver user. I was doing very well so far. I
had created and was managing over 70 pages in my site. It looked
great.
But I did something that causes my pages to display only the
text and graphics when I'm viewing them in Dreamweaver. No tables,
no CSS, nothing. Just text and jpegs all in a row. But when I
preview in a browser, the pages look great.
It's not code/split/design; that's normal. I think my style
sheets are linked correctly; everything is showing in the browser.
I just can't get the display to go back to normal.
Please help! Thanks.

VIEW | Style Rendering > Display Styles?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"KDeSollar" <[email protected]> wrote in
message
news:eqb7vc$amj$[email protected]..
> I'm a new Dreamweaver user. I was doing very well so
far. I had created
> and was
> managing over 70 pages in my site. It looked great.
>
> But I did something that causes my pages to display only
the text and
> graphics
> when I'm viewing them in Dreamweaver. No tables, no CSS,
nothing. Just
> text and
> jpegs all in a row. But when I preview in a browser, the
pages look great.
>
> It's not code/split/design; that's normal. I think my
style sheets are
> linked
> correctly; everything is showing in the browser. I just
can't get the
> display
> to go back to normal.
>
> Please help! Thanks.
>

Firefox does not display page information correctly

On the form on http://ppbm5.com/submission.html select a raid level of Raid 0 for the OS disk and select the Number of OS disk next. The only choices you see are 3, 4, 5 and 6. The same applies to the project disk question and the output disk question.
Using Chrome or Internet Explorer the number of disks shown to choose from are 2, 3, 4, 5 and 6.
Firefox hides or forgets the option for 2 disks.
The form used shows up correctly in the Form Maker site, it shows up correctly in Dreamweaver, it shows up correctly in both Chrome and Internet Explorer.
My only conclusion is that this is a Firefox issue. What can be done to resolve this?
As it currently is, one can only tell visitors to only use the form with Chrome or IE.
PS. I tried with FF 4.0 beta 10 and the problem persists.
BUT, the strange thing is on two other machines, with FF 3.6.13 the problem does not occur, so something must have messed up my regular system to prevent the correct display of the page.
I tried disabling add-ons, extensions and plug-ins, but that did not help.

Did you use the same [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] for the test with 3.6.x and 4.0 ?
Looks like a problem with JavaScript (Ajax).
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
If you the Firefox 4 beta version with the same profile then you should create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

FF not displaying page when URL is on a local test server

I have a WAMP test server on my Win laptop.
If I type in a url of an existing file on the test server using c://localhost/testserver/index.htm or c://wamp/www/testserver/index.htm, FF displays a blank page (with no source code). If I use a file name in the url (file:///c://.....) or double click the file on the test server, I get good code.
I'm testing with an html file (vs. a php file) just to take the php code out as a variable.
FF displays web pages on www just fine.
Tom

the easiest way to deal with security issues is to avoid them. if all files are on the same server, use relative urls.
otherwise, you may have to deal with security issues. whether you do or not, and if you do, how you deal with them, depends on what you're trying to do.
you may be able to use System properties but you may need cross-domain security files.

Browser not displaying pages

Similar Messages

Maybe you are looking for