Browser not fully loading

Hello, I have a blackberry Torch 9800 . My issue is that i can not look at the internet on my phone easily. For some reason it only shows part of the page but then it has white boxes all the way down the page blocking in formation/pictures/etc. I have cleared all temp files, checked for updated software and even verified all settings against my husbands. (He has same make and model, his is not doing this) Any help on this would be greatly appreciated. Thanks in advance!
Solved!
Go to Solution.

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then I recommend that you attempt to boot into Safe Mode:
KB17877 How to start a BlackBerry smartphone in Safe Mode
It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
Otherwise, you may need to consider a complete device WIPE, an OS reload, or even a BBSAK WIPE/Reload.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything ov

    Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
    == This happened ==
    A few times a week
    == Couple of weeks ago

    Your UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''general.useragent.'''
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
    Then restart Firefox

  • Bing web page will not fully load

    Hello,
    I have a windows 8.1 64 pro workstation on the network that will not fully load bing.com or any search link from the MSN home page.   As far as I can tell every other web page loads correctly just not anything with bing.   I tested
    in Chrome - same issue.
    The bing page only loads the choices at the top left of the page.
    The search box only has an orange square - no magnifying glass.
    There is no bing background picture.
    There is no scrolling picture bar at the bottom of bing.    If I copy a working result Bing search url from another PC - it still only shows a fraction a bing search page - none of the results. 
    Google search works fine.
    Chrome shows only the partial bing search page - same as IE.
    I've have checked the ip - no problems with dns or gateway.
    I've tried using 8.8.8.8 for the dns server - still won't load the page in ie or chrome.
    I've tried loading a new windows profile - still won't load the page in ie or chrome.
    I've checked the hosts file - no entries.
    I've run multiple types of virus checks including malwarebytes & Symantec.
    I've applied all windows updates.
    I've reset IE to defaults - obviously that won't help since chrome can't load it either.
     There are no domain policies applied.
    There are now ie addins - again - wouldn't impact chrome.
    There are no unusual applications installed.
    It is not using IE 64 bit - again wouldn't impact chrome.

    Hi,
    According to your description, since both IE and Chrome has same problem, it's not browser problem.
    Have you tried to disable firewall and Symantec temporarilly for test?
    If problem persists, firstly start system with Clean boot. Then using Process Monitor to capture the trace of accessing bing.com.
    Clean boot: http://support.microsoft.com/kb/929135
    You can access to the link below to download Process Monitor:
    https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    How to capture a Process Monitor trace:
    http://blogs.msdn.com/b/dswl/archive/2010/01/10/how-to-capture-a-process-monitor-trace.aspx
    Learning Example:
    Using Process Monitor to Troubleshoot and Find Registry Hacks:
    http://www.howtogeek.com/school/sysinternals-pro/lesson5/all/
    Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • IWeb page does not fully load

    I have tried several times to upload a new iWeb page to my iDisk. I get the two pop-up windows; one telling me that the page is loading and the other that it is "complete". When I first visited the "completed" web page, the photos did not appear and the theme background was missing (all white). The last time I tried to upload the page, the photos appear on the web page, but the slideshow stops in the middle.
    I have noticed that the "pie" completion icon next to my iWeb page does not disappear and never fills to gray (there is always some white in the pie).
    Any ideas why this is happening? Or what I can do to correct this problem?

    Anyone surfed/tested their iweb creations on a PC
    with explorer?
    My iweb test page with movies does not fully load or
    scroll on the wife's PC with explorer. Works great in
    Safari on all my macs.
    Hi sharkguy - Good point!
    Stats to Remember when designing websites:
    1. less than 4% of internet surfers use some version of Mac OS
    2. less than 7% of all internet surfers use Firefox as a browser of choice
    3. less than 3% of all internet surfers use Safari as a browser of choice
    4. at least 85% of all internet surfers use some version of Internet Explorer
    5. Netscape, Opera, and Mozilla make up the rest of browsers used
    Best wishes on your project, Rick
    iMac G5 iSight 20" - 30G iPOD - HP Pav 15" WS and Toshiba Sat 17" WS   Mac OS X (10.4.6)   Canon 20D & A620

  • SWF not fully loading

    I have a flash 8, as 2.0 site that loads swfs into a content
    movie clip. Everything works fine except for my photo gallery. The
    swf does not fully load on the first click. But if you click the
    gallery button a second time, it all loads. Also, once inside the
    gallery, I have a gallery_container movie clip that loads the
    different photo albums. These also usually do not load completely
    on the first click.
    My swfs do not have frames after the load and display frame,
    so I'm not sure why it isn't completing the action.
    I've been trying to solve this problem for weeks. I would
    really appreciate some help.
    Here is the site where you can see this problem in action:
    http://www.soultoneamps.com
    click on "enter"
    then "gallery"

    I solved this problem. So here it is for anyone else who
    might experience the same issue:
    I had too many complicated elements loading in one frame and
    in one layer. Even though I had a stop (); on that frame, all of
    the elements could not load on the first click.
    I changed my fla file so that one button is added into one
    progressive frame and layer at a time. Worked like a charm.
    Yay!

  • Certain existing and newly saved photos are not fully loading..

    I'm not sure if this is a result of the update, or related to a recent application I may have downloaded that interfaces with the photo library and/or camera (face melter™ or camera bag™)..
    it also may be a result of the 2.2 update..
    Here are some screencaps showing the issue.
    First one, this is a photo that I have hosted that I took with my DLSR, I saved it to my phone via the touch and hold saving process, early on in my phones existance as you can see from the 60 of 600something, and it appears nice and clear(aside from the slight compression from e-mailing myself a screencap)
    http://randy.mainevwscene.com/images/screenshot1.jpg
    now here is a screencap of me visiting the hosted photo on safari today.. it also appears nice and clear
    http://randy.mainevwscene.com/images/screenshot2.jpg
    I held my finger on the photo, and have now been prompted to save (still clear)
    http://randy.mainevwscene.com/images/screenshot3.jpg
    and now here is a screencap of the photo I just saved in my photo library. It is obviously blurry... now all photos will do this for a split second while they load, but its as if its not fully loading the file when I view it.
    http://randy.mainevwscene.com/images/screenshot4.jpg
    Has anybody else experienced this or is it just me?
    Message was edited by: thelumpya2

    after messing around for a while, I figured out the chriteria that causes the blurry photos... I have no idea why however..
    it is without a doubt related to the photos resolution... any photo that is of the resolution 800x533 or vertically 533x800 is having this blurry effect..
    I found a random photo on google image search with a resolution of 800x533 of a lambo.. I saved it to my phone, and here's a screencap of the photo saved to my phone.
    http://randy.mainevwscene.com/images/screenshot5.jpg
    I then saved that photo to my computer, opened up photoshop and changed the resolution from 800x533 to 798x532 (constraining porportions) and then hosted the photo on my website.. Then I visted the hosted photo's URL on my iphone with safari and saved this image (798x532).. Here is a screencap.. you can see the difference clearly..
    http://randy.mainevwscene.com/images/screenshot6.jpg

  • HT1386 hi, when i am syn my books from my mac to ipad even after one full day sync itunes show wait for items to copy and the books in ipad are still not fully loaded. how do i fix this, i have a large collection of books

    hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
    how do i fix this, i have a large collection of books around 12000 books

    Nobody knows? Not even administrators?
    Please it would be really nice to have help on that to take all the benefit of the remote app.
    Thank you very much in advance.

  • HT4059 Books are downloading to IPad 2 but not fully loading on iPhone 4S.

    Books are downloading to IPad 2 but not fully loading on iPhone 4S.  Shows book cover but the download line never filled out and book remains shaded and unable to open, delete, or move.  Tried un/reinstall of iBooks, reboot phone, turning on/off, syncing.  Suggestions?

    I contacted Apple support.  He had me unsync all books from my phone through itunes and then resync all books back to phone.  It work and all iBooks are now completely loaded. 

  • Microsoft Office 2007 student does not fully load

    I have been trying to get my Office 2007 student 60 day trail to load but it come back to me with the message:
    Microsoft Office Student 2007 did not fully load.
    please can anyone advise me what to do thanks

    Hi!
    Here it is a Toshiba user to user forum and I think this is a Microsoft problem. So I would contact the Microsoft support.
    Maybe there is something wrong with the website or something else.
    Bye

  • My iMovie keeps crashing and will not fully load. What do you think is the problem?

    What would be the reason why my iMovie keeps crashing and will not fully load?

    I don't know what version of iMovie you are using, nor the Mac OS X version (that's always helpful when posting questions).
    However, usually when iMovie has the type of problem you mention, it's advisable to firstly trash the preference file. Here's how to go about it for iMovie '11 on Mountain Lion (similar methods apply for other versions):
    Go to your Home folder <your user name>/Library/Preferences (NOT the Library folder at the top level in Macintosh HD). Similar to Lion, on Mountain Lion (10.8.3), the Home Library folder will be hidden (unlike pre-Lion OS X versions). To access it, click and hold down Go in the Finder menu bar, then press and hold down the Option key on the keyboard - the Library folder will appear in the drop down list. Slide the pointer down to Library and, as you release the pointer, the folder will open in Finder. Now you can navigate to the Preferences folder.
    In your user Library/Preferences folder, locate a file named "com.apple.iMovieApp.plist". With iMovie closed, drag this file to the Desktop. When next opened, iMovie will create a fresh preference file with the default settings (this happens in the background as iMovie is loading).
    If iMovie now opens and appears to be working properly, you can change the default settings in the menu item "IMovie > Preferences", as desired. Also, it's now safe to drag the old preference file to the Trash. Trashing the file will not harm any existing Events or Projects.
    Note that these instructions are for iMovie '11 (currently version 9.0.9). For users on earlier versions, the preference file has a different but similar name. For example, for iMovie '09 (that's version 8.0.6) the file is named "com.apple.iMovie8.plist". Earlier versions may or may not have a number in the name, for example, "com.apple.iMovie.plist"
    If this doesn't fix the problem with iMovie crashing, please come back as I have another possible solution to offer.
    John

  • Large Premiere CS5 Project not fully loading

    I have a project in Premiere that is relatively large (lots of footage, effects, music, etc.) that will not fully load. The actual 'loading' window does appear, with the loading taking a minute or so. However, when the project finally opens, all clips say "Media Pending", and take forever to create thumbnails. The project has not made it through this opening process without appearing to completely create all thumbnails to only crash. Sometimes the 'Saving' window will appear, but the progress bar will remain empty. The window is then inactive, and if I try to cancel the saving, the entire program crashes. I'm not too happy about this. Any suggestions?

    Thanks.  We're getting closer.  Next...
    when I would click on the project to use it
    What specifically does that mean?  Where exactly are you clicking?

  • Ppt slide not fully loading

    Hi, I've uploaded a ppt presentation to captivate and for the most part, all is good. There is one slide that did not fully load, though. It's just a simple bullet point slide - a title and then 4 bullet points, but only 2 load. I've tried re-loading it. I've recreated the slide and saved it as another file and tried importing it that way... Still only 2 bullets points load. Any suggestions?? I'm using captivate 6 and ppt 2010.
    Thanks!
    Lisa

    Hi Lisa
    Does that slide operate normally in PPT? Or does it require you to click to make the bullets appear?
    When you import from PPT to Captivate, each slide is converted to a SWF and set as the background. If your slide has bullets that appear on click, they will behave in a similar manner once the slide has been converted into Captivate.
    Cheers... Rick

  • EAC is not fully loading

    I'm using Exchange 2013 and after we restart the server the ECP page is not fully loading.
    I tried restart again and keeps the same. Can someone help me how to fix it?

    Hi,
    According to your description, I can understand that you can access EAC in exchange 2013 successfully, but there is an issue with incomplete page display. Have you tried it in other browsers?
    Please make sure you are using supported browsers for EAC access. If the issue also happens in IE, I suggest we can try to add this website into compatibility list to check whether the issue persists. To do it, we can try:
    Press Alt + T, and then click on Compatibility view settings, add this URL into compatibility list. For detailed information about this setting, please refer to:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11-win-7
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Page not fully loading unless refreshed

    I am experiencing a bit of difficulty with one of my websites and I am hoping that some fresh eyes may help. What is happening is, the index page is not fully loading on arrival. It only loads if the page is refreshed. Can someone take a look and see if you can see the problem?
    Any help is appreciated

    Have a look where?
    Can you post a link to your website?
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Other things that need attention:<br>
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r22
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Ipod classic mp3 files not fully loading

    Hi,
    I have two iPod classics, one 80gb, the other 160gb.  Having loaded up my music on the more recent 80 gb, mpeg audio files, 192kbps, some 12,000 odd songs, I have noticed some songs have not fully loaded.  They play to a point, end and we move on to the next song.  Having checked one particular song, I notice that it is also truncated in my older 160gb pod. I have tried a restore and reload on one pod ut that has not changed anything.  The song is complete and plays so in iTunes on my Mac.  Any suggestions?

    That sounded logical B-rock and I followed your instructions in this fashion:
    1. I deleted the track from iTunes and synced my iPod.
    2. Subjected it to MP3 Validator and got the little ping of goodness.
    3. Added the track to iTunes
    4. Re-synced my iPod
    Now, I played the track first in iTunes and it played fully, then played it on my iPod and it cut off at exactly the same time as previoiusly. All this is getting frustrating.

Maybe you are looking for