Browser not supported after CS4 Install

I installed CS4 Design Premium today and have been having browser trouble since. I'm getting alerts from multiple websites that state that my browser is not supported or that my system does not meet minimum requirements (veer.com, netflix.com). I have used all of these sites in the past with no problems on the exact same computer and system.
I'm receiving this message in both Firefox 3.0.10 and Safari 4.0. I would really appreciate any help. Thanks in advance.
In case it matters, I'm on a MacBook Pro 2.4 Ghz with 4GB RAM, OS 10.5.7.

I ran into a similar issue recently. Samsung HDTV used to work fine via HDMI from my Mac. After upgrade to Mavericks, the TV would just show a "Mode not supported" message.
Simple fix did it for me:
* Connect the television to the Mac via HDMI cable as I normally would.
* Power on TV and set to correct channel.
* Go to System Preferences|Displays
* Click the "Gather Windows†" button, which brought a hidden, 2nd Display window onto my Mac's screen.
* Using this 2nd window, I was able to configure the resolution for the Samsung HDTV; in my case, 1080p.
† Note the "Gather Windows" button is only visible when multiple displays are connected and detected - which is the case when you see this "Mode not supported" message.

Similar Messages

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • Apps will not open after ios5 install.  Any solutions?

    Apps will not open after ios5 install.  Any solutions?

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • I8.0 Browser Not Supported

    Is it possible to catch exception (rather than system dump 'Sorry program/browser not supported" )gracefully when incompatible browser [for e.g IE 8.0] is used for calling Web Dynpro ABAP application?
    thanks,
    Sanketh

    I don't believe that this can be caught becuase the error is thrown very early in the framework startup and your particular application hasn't even been started yet. 
    You can build custom error messages and attach them to the SICF node, but this isn't going to let you by pass the error.
    The offical SAP response (from note 1294877) is that you can use the IE8 blocker toolkit provided by Microsoft to keep users from installing IE8.
    Even if you could bypass the error or change the client string identification; IE8 isn't supported and you could run into problems and inconsistencies in the rendering.

  • Running Firefox 10.0.2, cannot add new search engines from Mycroft Project. Error message: "you will need a browser which supports opensearch to install this plugin" Please help with steps on how to fix this issue in Firefox, thank you

    Can't add new search engines from Mycroft Project in FF 10.0.2. Error message states: "you will need a browser which supports opensearch to install this plugin"

    You're welcome.
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • View Wiki and Webcal on iPhone - Browser not supported

    As the title suggests, I would like to use the wiki and webcal on an iphone.  Ideally, I would like to turn off the browser tests the server does so it just serves the page to an iphone just as it would to any other window.
    FWIW, in an android phone, the wiki services give a "browser not supported notice" but still serves the page like a regular page, and it works fine.
    I have many users, so a server side change would be better than trying to get all of my users to use an emulated browser.

    What do you mean by "When I do a search on my browser, I get a message that it is not supported and the message suggests to use FIREFOX"?
    Where are you searching?
    You're right, FireFox cannot be used, but your 8520 browser can emulate FF.
    Tell me more.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Netflix & Amazon-Mac & Browser Not Supported Issues

    Hello! I am having issues with both Netflix and Amazon's "Search Inside" with my MacBook Pro. I have all the lastest OS (10.7.2), browsers (Safari, Firefox, Chrome) and according to their (Netflix and Amazon) requirements everything is fine. I even have Silverlight (which I couldn't download from Microsoft because it kept saying "browser not supported.").
    It can't be a coincidence that I am having the same exact issue on all three browsers on these two sites.
    What could the connection possibly be? I am absolutely stumped!
    Thanks for the help!

    Hi there, I meant that I was getting similar issues with both Netflix AND Amazon...separately.
    That said, I figured it out. It was my virus protection. Apparently Netflix and Amazon's "Look Inside" don't like it. I should have figured out that the virus protection s/w was the issue. Netflix suggested it and they were correct.
    Yeah, yeah, I know... Macs don't need virus protection. After some of the security issues that have been going on, I say 'better safe, than sorry." ;-)
    Thanks for the response and help!

  • Microsoft Adcenter says browser not supported

    Microsoft Adcenter says browser not supported and tells me to enable cookies and java yet these are enabled

    Hello Siborg.
    Can you provide me with a link for this site? You may need to contact Microsoft about this, though.
    Or you may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

    what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

    It can be that you have an old version of Photoshop Elements and a new camera.
    Please tell us
    Which operating system you are running on
    Which version of Photoshop Elements you are using
    Which camera the raw images come from (Make & model)
    Brian

  • CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

    I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information.
    Can anyone please help?

    yellowmledbetter wrote:
    Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
    The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
    The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
    But, here goes:
    Your cameras are newer than your raw converter, so it won't understand them.
    CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
    Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
    All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
    DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
    If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
    All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
    I really should be in bed.

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • Mac book pro will not sleep after i installed mavericks

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

  • C7 browser not working after update to anna

    c7 browser not working after update to anna.. Plz help

    Hi bluz,
    Welcome to the Nokia forum.
    If the default browser doesn't work after updating to Anna, hard reset the device and then reinstall Anna with Nokia Suite. 
    Take a back up with Nokia Suite by going to Tools > Back up. When making the backup, don't tick the Settings box as this will back up the bug. Now hard reset the phone with *#7370# and default security code 12345 unless you've changed this code yourself. Once the phone has rebooted you will have an empty phone.
    Now click on the green icon in Nokia Suite and reinstall the current software. Once you've done this, click on Tools > Restore to place the back up back onto your phone.
    After doing the above you will be able to use the default browser again.
    Let me know how you get on so that I can troubleshoot, if necessary.
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

Maybe you are looking for