Browser plays the flash content.but it is not giving sound.why? please help me
My phone is samsung galaxy s2 gti9100.
go thrpugh this link:
[[Why can't Firefox for mobile play Flash on my device?|Why can't Firefox for mobile play Flash on my device?]]
Similar Messages
-
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns. -
I made an in app purchase and the payment did not go through due to lack of funds. Now I am trying to change the payment option (credit card) but it is not accepting it.
Please help! thanks in advance.I am desperate right now. I'm not sure if I got myself into some real trouble since I got the in-app and it works fine, but the purchase did not show up. It usually asks ms if I want to pay 2.99 and I would press "yes," but this time it did not ask and I feel like I got this app without paying for it. please any advice!?
-
Hi, I buy iTunes gifts card (from Netherlands),and I have Apple ID,but iTunes store not registered me ! Please help me.
Authorize the computer from the "Store" menu. You will have to use the Apple ID used to purchase the music.
-
I found an iphone 4 and i reset it everything went good. It told me to connect to itunes so i did (via windows 8) but it could not recognize it. Please help
I hope if I ever lose my phone that you find it snozdop and not ajackson15. Maybe ajackson15 will lose something of his/hers and then not get it back
-
My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
I just updated my iphone 4 to 5.0.1 and yet i encounter a problem which is that i cannot get to the internet while it always says : you are not subscribed to the cellular data, or it's not been activated. Please help me my carrier is AT
Check to make sure cellular data is not disabled in settings. If it's on, try re-setting the phone. If that doesn't fix it, call AT&T.
-
HT2128 I am trying to download Java onto my Mac, but it will not allow me. Please help.
I am trying to download Java onto my Mac, but it will not allow me. Please help.
From where? What happens when you try?
Java (2)
Java 6 Enable
Java SE 6 Update 20013-004 -
i forgot my security question and it won't let me buy any songs but whenever i go to manage my apple id it says i need to tell the answers to the security questions but i don't know them someone please help
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
(96813) -
When i go to move app from dock the cloud shows but goes back to dock. can you please help
When i go to move app from dock the cloud shows but goes back to dock. can you please help
Drag it further away and it should release. It used to be that you just had to drag it off a little bit for it to delete. The new behaviour got introduced at some point in Mountain Lion.
-
HT201210 I'd like to delete the downloaded update, but I don't know how. Please help?
I have iphone 4 and I'd like to delete the downloaded update so i can reclaim the space, but I don't know how. Please help?
I'm talking about IOS update..
-
I have an account in the Middle East and am now moving back to UK. I want to use my existing account id but with UK as home but it won't let me. Please help. Steve
The possible reasons are:
1. Store credits in your account
2. Pending downloads
For more information contact iTunes Customer Support:
http://www.apple.com/support/itunes/contact/ -
I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Hello,
Can someone please help me!? I am trying to put music on my IPod and it was working the other day. I can not get itunes to recognize my Ipod. I have tried to unistall and reinstall Itunes. I have tried all the steps on the site and can't get it to come up. I tried my IPhone which was also showing up just the other day and it also is not showing in Itunes! Please help me. I need to be able to put music on my IPod for my work.I have sorted it myself!!
Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem. -
firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!
firefox is not able to load any websites... i tried everything given in the support forum under the topic firefox is not able to load any websites but other programs can.. but still i am facing the same problem. so please help me out with this issue!!
Maybe you are looking for
-
How to build the FM data I_header and I_orgdata
hi all, Im working on the conversion program for AVL using the following function modules BBP_PD_AVL_GETLIST BBP_PD_AVL_CREATE BBP_PD_AVL_UPDATE BBP_PD_AVL_SAVE In the function module BBP_PD_AVL_CREATE , how to build the FM data I_HEADER and I_ORGD
-
Procps header error building conky-cvs
checking proc/procps.h usability... no checking proc/procps.h presence... no checking for proc/procps.h... no checking proc/readproc.h usability... no checking proc/readproc.h presence... no checking for proc/readproc.h... no configure: error: someth
-
I can't restore my mini no matter what I try!!!
My iPod mini has the little folder with the exclamation point on it. I tried to restore it to factory settings, but it's not even showing up as a device in itunes. I tried following the instructions for "when ipod is not recognized by itunes." but th
-
** Is it possible to run a windows .bat script job from ODI between server?
Hello Friends, We have ODI 10.1.3.5 on a Win2003 Server. Have a windows Batch script job .bat(this is a related to a different program - DRM) on a different Windows 2003 server...is it possible to execute .bat job thru ODI between servers? Appreciate
-
I'm going to 'fess up here. I have never used iTunes. Our children do, but so far we have managed our music with our CD collection. But all that will change now we've got an iPad and can have our music on the move like the rest of the western world.