Browser-preview doesn't show pictures

I set up an iMac with more users. The Aperture Library is stored in the shared volume, so every user can upload photos from a camera.
In the Browser-view, only the user that uploaded the pics can see them, but not all the other users. This is the same in the film-stripe view mode in the lower display area. In the viewer mode, the pics are shon correctly for all users.

Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

Similar Messages

  • Mavericks's Messages doesn't show picture instead it's a file to download

    Hi Everyone,
    I installed Mavericks and now Messages app doesn't show pictures messages from senders, but it's a file to download. I still see the picture I sent out but not pictures coming in. I didn't have that issue with Mountain Lion. Can someone please help? Thanks in advance.

    Hi,
    Messages 8 in Mavericks seems to handle pictures differently thnan Messages 7.x.x (Mountain Lion) and the iChat versions before that.
    It seems it is now a function to "syphon" off pics to an Attachment folder and show only the spyglass item in the Conversations (iMessages) or Chats (buddies) to "recall them causing them to open in Preview.
    It seems this will happen at different points time wise but has some relationship to how far the pic may have disappeared "up" the Chat.
    This chat with "myself" spread over an AIM and an iMessages chat with my iPhone shows older item I sent not being displayed but one between Christmas and New Year still shows.
    If I have the top hat pic on the left that is from my iPhone using the iPhone number.
    Some are just the sync coming back which then show the Sig pic of the Mac Send of the iMessage.
    I did have an issue where new Pics sent from the iPhone were going to the Downloads folder and not showing in the Chat window at all.
    Nor could I iMessages the iPhone.
    I could select the iPhone Number to send it too but as soon as I hit the enter key the Conversation seems to completely disappear and nothing was sent.
    I deleted com.apple.ichat.plist for ~/Library/Preferences
    Open the Finder > Go Menu > Go to Folder and enter that path in the dialogue box.
    find the file and Drag it to the Trash.
    Restart the app.
    8:58 pm      Monday; February 3, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Preview doesn't show up in the capture window

    When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

    Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
    One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

  • Template Preview Doesn't show images

    I've created a template but when i go to create a new page
    from the template the preview doesn't show the images.
    Here's what i see
    http://tel3deals.com/pics/contributeproblem.jpg
    When i give it a name and open it it shows the page with the
    images.
    any idea why this is happening ?
    Thanks.

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • Quick-time film doesn't show picture, sound only!

    Repeatedly quick-time film doesn't show picture, sound only! This happened after an update some time ago. The current version is 7.7 PRO under MAc OS 10.5.8. Very annoying...!!!!!!

    Use the Movie Inspector window to tell us more about one of these files.

  • Ftp response timeout / browser preview doesn't work

    Good evening,
    today i tried to update my website. Only problem, when i displayed the browser preview some of the elements simply wouldn'T show up that did in earlier version of use. I never had any problems in this direction so i continued with my workflow. When i started to upload my images via an ftp client i experience a problem as well that might be connected to the first one. after some image were uploaded i got the error that "FTP response timeout" so i tried it again later but with the same result. i can skip the images but it takes just too much time and simply doesn't work as intended. Do you guys have an idea what the solution for my problem might be?
    windows 7 muse 2014.2 64bit
    internet is working all right
    the problem occurs when i try the browser preview as well so it'S rather connected to muse than my ftp client
    i don't have any missing elemts and all links are up to date
    i hope you can help me . Thanks a lot in advance!
    Lucas

    Hi Lucas,
    Could you please send your muse file to [email protected] so we may have a look. Please make sure you mention the link of this forum thread in the email Subject so we may handle it appropriately. Also, if the file is larger than 20MB, please use an online file sharing service like Dropbox or WeTransfer.
    Thanks,
    Vikas

  • Preview doesn't show conditional fields in PDF document

    A PDF document created with Adobe Acrobat has several radio buttons with a dropdown field conditional on each one. These dropdowns don't show in Preview, but do show in the Adobe reader.  Any suggestions for the form developer?

    We get these files from the vendor , he creates the file in Adode illustrator for us  and he saves the f
    ile in PDF format and sends them . He aslo advised he can open
    the filre in acrodat pro version  and the print pervi
    ew is fine and he can print the file with out any issue.
    VJ

  • Preview doesn't show images, while Acrobat does

    I have a pdf file that has many images.  on Preview, it only shows black outline where the image should be, but the image itself is blank.
    but when I open the same document using Acrobat, the image appears.
    any idea why this is happening? 

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • My browser (and preview) doesn't show images in Muse...

    My browser (and preview) is not able to show images hosted on my local server, however when I access those HTML files directly it works; It seems that something is blocking HTTP traffic from my Mac. Please help me find the root cause. Thank you! I am wasting hours on this.

    I've been looking online and others seem to have similar issues but i haven't found any solutions.
    Here's a few screen shots to show others the problem.
    Design Mode:
    Preview Mode (same results from Preview in Browser):
    Published to Test Site:
    If i refresh it a few times in preview I will get bits and pieces of the image to come through.

  • Time off in print preview doesn't show

    Hi, 
    I'm working in Project 2010 on a Windows 7 machine.
    In the Gantt-diagram the time off (saterday and sunday) is shown.
    However, it doesn't in the print preview neather on the print itself. Te free time is just as blank as the rest of the week.
    I use project a lot but never had this problem.
    Even when I copiet the rows to another project where I didn't have the problem, the problem also moved to that project..
    Hope anybody can help me with this problem.

    Have you compressed the print so you are not showing every day?  Check File > Print and click the Page setup hyperlink.  On the Page tab does it show 100% ?

  • Preview doesn't show some info shown by Acrobat Reader

    I received a pdf attachment announcing a local job fair actually being run by Microsoft. It displayed in my mail message but they seemed to have omitted the date of the fair. I asked friends with Windows machines who had also received that mailing and attachment, and they said that the date is showing right at the top. So I detached the PDF, opened it in Adobe Reader 7.0.7 and the date was right there in big letters. Then I opened it in Preview, and the date was missing again (as were a couple of other lines). I checked, and the version of Preview I am running is 3.0.6, and it's obviously got a problem.

    We get these files from the vendor , he creates the file in Adode illustrator for us  and he saves the f
    ile in PDF format and sends them . He aslo advised he can open
    the filre in acrodat pro version  and the print pervi
    ew is fine and he can print the file with out any issue.
    VJ

  • Preview doesn't show 'open recent' items

    When Preview is open, File-->Open Recent shows only 'clear recent'. Checking all different values for 'recent items' in System Preferences makes no difference in Preview. Some other apps work with 'Open Recent' (eg Pages) but not all (eg TextEdit behaves as Preview). Anybody see something similar, or know a fix? Thanks!

    Triple-click the line below to select it:
    ~/Library/Preferences/com.apple.Preview.LSSharedFileList.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    What is the Modified date?
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • Preview doesn't show JPG files

    I keep having problems viewing JPG files in Preview. The image displays in the Finder, it displays in the thumbnail view for 'Downloads" and it will even appear in the sidebar for Preview if I choose to show the sidebar, but it does not appear in the Preview main window.
    I tried deleting the com.apple.Preview.plist file as recommended in an old thread, but it didn't help.
    ideas?

    Hi tomswie76, i found your solution absolutely working.
    Just turn on milimeters in preview module and prev
    iew is on again. This works on all of my catalogues.
    Thanks.
    Karel

  • Organizer folder view doesn't show pictures

    All of my pictures on my computer have been imported into Organizer (PSE 9).  When I choose the display option of "Folder location," and click on one folder, sometimes the pictures show and sometimes they don't.  And some of the pictures show and some don't.  Most of the folders show no pictures.  Right now I want to edit a picture but I cannot get to it in Organizer because in the folder it's in, only 3 of maybe 20 pictures show and it is not one of them.  Many pictures show in Windows(7) Explorer that have never shown in Organizer.

    Hi ,
    Have you imported the files in Organizer. If not then right click on the desired folder shown on the left hand side in Folder View. Choose the third option which says 'Import to Organizer' to import and view all of the folder's files in Organizer.
    If I have understood the problem incorrectly and you have already imported those files to Organizer then try this : Switch to thumbnail view for a while. Search and select the file you want to work on. While the file is still selected in thumbnail view, choose to switch to Folder View to verify if the file is still not shown in Folder View ?
    Hope this helps. Thanks

  • Presets preview doesn't show in Navigator

    Hi, I have LR3. Following function doesn't work for me: there is no preview in Navigator for presets.
    Should be: " To preview the effects of a preset on your photo, move the pointer over it in the Presets panel and view the effects in the Navigator panel."

    Hi,
    you can see the navigator in the left panel in the develpment mode?
    On the screenshot you see the navigator (with preset applied), the presets blow and my raw file in the right part of the screenshot.

Maybe you are looking for

  • Calling a method in the backing bean when rendering a table

    I'm rendering a table that begins with : <h:dataTable value="#{showRooms.rooms}" var="rowRoom" ... There are several properties I'm displaying. Some are just displayed as they appear from the database like: <h:outputText value="#{rowRoom.roomNumber}"

  • Report probelm

    Hi, I have a report on infoset, when I ran the report i am getting a No Application data found. FYI: Infoset contain 3ODS and 3 Infoobjects. Can anyone give some idea what is the problem? Thanks Sreenu

  • HT4061 I have lost my iPad and need to find out its serial #. I have an I phone but no computer. Can anyone help?

    How do I find my iPad serial #? I have left it on an airplane and need the number for the report. I do not have a computer but do have an I phone

  • Help with itunes logging in

    I've been trying to buy from itunes, but everytime i try to log in i use my ipod name ([email protected]) and it says it hasnt been taken yet! But i can sign in on here, and when i try to make a new account it says my email is taken. How do i log int

  • Trace postscript file path

    Hi scripters, While printing postscript file from indesign, I need to trace the postscript file where its creating. This can be possible by javascript? Thanks regards a r u l