Browser preview stopped showing design update

I am new to Dreamweaver, and whenever I make changes to the
page, I will preview the changes using browser preview. After
making several previews back and forth, my browser suddenly stopped
displaying the latest design updates. I have done every suggestion
mentioned about resetting, & clearing caches in my browser, but
i don't see the latest design update I did. In dreamweaver design
view, I can see the image I added, but when viewed in the browser,
what I see is the design prior to the addition of the new image.
What else can I do to correct this? When I use a different browser,
I see the new design.

Which browser isn't working?
Also make sure that you are looking at localhost and not
remote site. I do
this sometimes and get the same result.
Steve
"marsdenz" <[email protected]> wrote in
message
news:fid7nc$n23$[email protected]..
>I am new to Dreamweaver, and whenever I make changes to
the page, I will
> preview the changes using browser preview. After making
several previews
> back
> and forth, my browser suddenly stopped displaying the
latest design
> updates. I
> have done every suggestion mentioned about resetting,
& clearing caches in
> my
> browser, but i don't see the latest design update I did.
In dreamweaver
> design
> view, I can see the image I added, but when viewed in
the browser, what I
> see
> is the design prior to the addition of the new image.
What else can I do
> to
> correct this? When I use a different browser, I see the
new design.
>

Similar Messages

  • Why does Quickview stop showing previews when I scan through a folder of .eps files?

    I have an Adobe Illustrator folder with a bunch of my .eps files that I browse through, and after about 20 or 30 files the quickview preview stops showing me the artwork and shows the generic eps image.  Is this a limited feature or is something wrong here?
    Any advice, help. or

    Try downloading this: http://www.eternalstorms.at/utilities/epsqlplg/
    You place it in ~/Library/QuickLook
    Source.

  • Muse CC 2014 - Does not update properly changes on websites in preview and browser preview

    Hi, I am working in a project on Muse CC 2014 and everything in the designer view works pretty well, but when I make change to colors, fonts, menus, etc and click preview, I cant see my changes, instead I saw old version of my project, the same happens on the browser preview, I need help cause I have to get this done today. Thank you.

    We purchased CC for teams and upgraded all workers to InDesign CC 2014.2 in March. Because I installed using a package - rather than individually - quite a few plug-ins were not working. This week, I uninstalled InDesign CC 2014.2 on everyone's machine and individually installed InDesign, from the Creative Cloud menu. However, instead of installing the expected InDesign CC 2014.2, it installed InDesign CC 2014. As stated above, "It doesn't even show up that the updates are available, it simply says "up to date"". Obviously this is not true - since we just had 2014.2 last week.
    Can someone please let me know why the new install would have regressed to a previous version - and how I might be able to get the current version back?

  • Lightroom has stopped showing thumbnails on Import. How do I get my previews back?

    My Lightroom (5.3) has stopped showing previews on Import.  I can still see older Imports in Library but my latest Imports are just grey boxes.  I can open the boxes in Develop and these stay as previews for up to 3 thumbnails in Library before disappearing again.  I have tried reinstalling Lightroom 5.  I have checked my sRGB.  It is the same problem with different cards and different external drives.
    How can I get my Library to show Preview thumbnails once more?  Thanks, Angus

    Could it be that the Camera Software is installed and it got Updated?
    -Sometimes it happens that the "autoplay" uses the Codec for recognizing the files, and When Lightroom tries to do the same the files are in use, so it can not generate Previews/Thumbnails.
    Do you get the same result if you Try to Import from Safe Boot?
    - It could be that there is some software installed that now also manages during startup, also preventing Lightroom to Generate the Previews.
    Have you tested with a new Catalog, do you get the same behavior there?
    Also it might be far fetched, but incase you haven't seen it it might help you on the issue:
    - http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html
    Hopefully this will help to resolve the issue.

  • If i used cracked version of IDM and after connecting to net it shows that update available so now my question is that if i update it will IDM stop working ?

    if i used cracked version of IDM and after connecting to net it shows that update available so now my question is that if i update it will IDM stop working ?

    hello, this is a support forum for the firefox web browser - we can't help you with this kind of request. if you don't want to spend money on the program, use a open & free alternative like the [https://addons.mozilla.org/firefox/addon/downthemall DownThemAll!] addon instead...

  • My 2 monitor stopped showing the image after update

    Hi, a few updates ago, I think the second, my 2 monitor stopped showing the image, the system detects it but either have to restart or start the screen saver so that the image is activated, I I tried change the monitor, cables and is the same problem ... what happens alguein miso, know what to do? ... greetings and thanks in advance

    This can be caused by a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Font in Design View different from font in Live View and browser preview

    My external style sheet has the body set for a sans-serif font and there is nothing to contradict it in the HTML documents. But while I get sans-serif in the Design View (as you would expect), I get a serif font in Live View and Browser Preview, not to mention on the Web itself.
    How is this possible (and what should I do about it)?
    --Paul

    Murray and David: it worked! It is a rare and joyous experience to have a straightforward solution to the sorts of problems I come up with (including other realms). But I have to say that with HTML and CSS (and hence with Dreamweaver), solutions to difficulties have seemed within easier reach than in other parts of the computer world.
    By the way, I wanted to choose "correct answer" for both your posts, but after making the first click it was no longer available for the remaining post--so I typed "helpful" even though that one was correct too.
    Thanks again.
    --Paul

  • Pasted lightboxes do not show when uploaded but do on browser preview

    I created the lightbox display on the first page and then as i worked from page to page i would paste the original lightbox to the new page and replace the images and the captions but when i upload the site it doesn't show the lightboxes on the pages that i pasted the lightbox into it is just blank but the headers and footers are ok. The lightbox shows in the browser preview with all the images and captions.
    all the images are there in the assets folder

    Search the knowledge base for NET Red X and try out the solutions there.  If you are using .NET 2005 make sure to focus on the ones for it first.  It is usually either a web.config setting or not having the asp_client folder in the correct place.

  • How do I get the Ap Store to stop showing that I have an update available? I have aready purchased the update from the company's site.

    How do I get the Ap Store to stop showing that I have an update available? I have already purchased the update from the company's site.

    A Fix For: App Store Keeps Wanting To Update Apps

  • Media browser does not show previews of raw photos

    Hello,
    I use Aperture 3.4.3 and I have the following problem. If I import photos in jpg format they are immediately available in the media browser and can therefore be selected as a desktop photo via the Desktop & Screen Saver preference pane. If I import photo's in raw format, they do not appear in the media browser until I have forced Aperture to rebuild the previews. If I edit the photos without forcing Aperture to rebuild the previews they are not available in the media browser.
    Any suggestions are welcome

    1. Aperture does not generate any previews when importing jpg's, raw photo's or merging libraries even though I have selected New projects automatically generate previews and always share previews with iLife and iWork (I am importing photos into an existing project but I would expect photo previews to be updated automatically in these cases as well). My statement above that Aperture shared jpg's automatically is therefore incorrect.
    This looks like your preference settings cannot be stored by Aperture. You write, that you already tried to remove the preferences. You did look in the  "Preferences" folder in your hidden User Library in your Home folder  ~/Library/Preferences/com.apple.Aperture.plist and not in the System Library on your MacintoshHD  /Library/Preferences/com.apple.Aperture.plist, right?
    Also, when removing preferences in Lion an Mt. Lion, it is best to log off and on again after quitting Aperture. Otherwise the removal may not take, because you cannot rely on a "Quit" to remove the process from the caches. Aperture simply may launch again restored from the cache, without noticing that the preferences have ben removed.
    3. If I edit the photo in Aperture after I have generated a preview (say crop it), the preview does not get updated.
    That is consistent with the above.
    4.You can only resolve this by forcing Aperture to generate a new preview, shutting down Aperture and then launching the preference pane.
    Ths may also be related to broken Aperture preferences. The Media browser needs the preferences file to find the current Aperture library.
    I like to suggest two basic tests:
    Generation of previews may also fail, if your Aperture library is corrupted. Then You should have no problems with the generation of previews, when you import into a new library. Create a small new testlibrary and import a few images. Are previews generated? I not, then the problem is not dependent on your current library. If yes, you need to trouble shoot your library. Post back.
    Do you have the same problem, when working from a different user account with a diffrent Aperture library? Then preferences are not a problem - you have a system wide problem and probably need to reinstall. Post back.
    Regards
    Léonie

  • Mail suddenly stopped showing the preview pane.  Is there a fix? I'm on 10.5.8

    The mail on my mac mini stopped showing the preview pane.  Is there a fix? I'm on 10.5.8

    I wonder if you've just dragged the page divider across so it's not visible, try selecting the right hand edge and drag it back left ?  (Or maybe it's down and up on that version I'm on 10.7.2)

  • I have ipad3  i want to stop downloading the update software from iOS5 to 6  plz tell me how show i stop this downloading

    i have ipad3  i want to stop downloading the update software from iOS5 to 6  plz tell me how show i stop this downloading

    This happened to me. I went to settings - reset - reset all settings and it STOPPED!

  • Look different in Design view and Browser Preview

    Why do it look different in Design view and Browser
    Preview?

    "MA_DAVIDLEE" <[email protected]> wrote in
    message
    news:e39mte$las$[email protected]..
    > thank you for reply and the url is www.cipr.com.tw. you
    can see the
    > navigation position is different in Design view. Thank
    you!
    >
    How could I see the Design view? Can you post a
    screenshot?

  • My ipod stopped showing up in itunes after software update

    i have an ipod nano and an ipod classic and they both stopped showing up in itunes after i updated the software. please help

    Have you tried here:
    iOS: Device not recognized in iTunes for Windows

  • My ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

    my ifone3gs stopped working while updating...its even nt reading sim..it just shows a connection sign toitune.. whats the prb??

    It means that your phone crashed during the updating process and is now in recovery mode.  See this article:
    iPhone and iPod touch: Unable to restore

Maybe you are looking for