Browser Sets Empty Unable to Add

Hi, I am using the online version of browserlab and when I enter a url I am asked to choose a browser set. When I go to the browser set window there are no sets defined and I am unable to add a new one by clicking the add new set button. Any ideas?

As far as we know those suggestions worked for the other users... as Mike said "If the problem persists please let us know and we will work with you to resolve the issue". We haven't heard anything back after that.
I think this is an issue with not being properly signed in. Somehow the login step is being skipped. Can you try clicking the Logout link in the upper right corner of the BrowserLab interface and try logging in again. If that doesn't work for you post back here.
Mark

Similar Messages

Music Library Empty; Unable to Add Folder to Library

Hi,
I recently wiped out my XP Pro desktop without backing up my ITune music. However, my ITune music remained intact on my IPod.
I then:
--In ITunes>Devices, checked "Manually manage music and videos"
--Moved ITune music to an external drive
--In ITunes>Devices, UNchecked "Manually manage music and videos"
--In ITunes, Music in Library went blank
--Moved ITune some music from an external drive \iPod_Control\Music to My Music\iTunes\Music on my C Drive
--in ITunes, File>Add folder to Library from My Music\iTunes\Music
--Music appeared correctly in Library
--I then moved additional music from an external drive \iPod_Control\Music to My Music\iTunes\Music on my C Drive
--Music was not updated in Library
--I then deleted all music and imported again, with no change
I am still unable to see any music in the Library after attempting to add folder to Library. However, my Device is showing 45gig of information.
Any ideas why would be appreciated!
Thanks, Steve

sloved with re-deployment of sap.com_tc_dtr_dbschema.sda
issue was with the DB missing tables... the above files needs to be deployed.

App catalog: unable to add payment account, error PMT03043

I'm unable to add a payment/billing account for my touchpad. Trying "Preferences & Accounts" in the HP App Catalog menu gives error "Action could not be completed. Try again later" -> "Retry" but this error dialog never goes away on re-trying. So it's stuck at this point. Only way to exit is to card this screen and swipe it away. So how does one add a payment/billing account ? In the "Help" topic about setting up billing account, the Help manual says, "...try to buy an app -> click purchase -> add credit card" but when I try to purchase an app, an error dialog pops up "App catalog could not complete the last action you performed. Try again later. PMT03043". Later, found that PMT03043 error means "No data for Catalog country for device". My HP Touchpad is set to "US" as the country. Why this error when catalog country is already set to US? Could somebody please check their working TP (able to add payment accounts and buy from HP app catalog) and provide some suggestions ? Thanks. I'd like to buy some apps!
Post relates to: HP TouchPad (WiFi)

Also, found "com.palm.service.payment" empty folder, and "com.palm.payment.service" folder with code in it. So which of these is supposed to be the proper valid payment service ? Can any of the devs here help? I guess one of these services is not running so the error pops up? Help please. Aren't there some official HP support/devs on this forum ?

Cisco ASA 5505 VPN connection issue ("Unable to add route")

I'm trying to get IPSec VPN working onto a new Cisco ASA5505. Pretty standard configuration.
Setup:
* Cisco VPN client on Windows 7 (v5.0.07.0290 x64 on Laptop1 and v5.0.07.0440 x64 on Laptop2)
* PPPoE/NAT and internal DHCP on the ASA were configured with the Startup Wizard in ASDM
NATting is working fine - internal PCs get an IP address in the 192.168.2.0/24 range and can all access the Internet.
I wanted to be able to connect from anywhere to the ASA in order to reach one of the internal servers. Should be pretty basic.
First I tried with the built-in ASDM IPSec Wizard, instructions found here.
VPN clients can connect to the ASA, are connected (until they're manually disconnected), but cannot reach the internal network nor the Internet. Note VPN client can connect fine to a different VPN site (not administered by myself).
Client logs show following error messages:
1 15:53:09.363 02/11/12 Sev=Warning/3     IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
2 15:53:13.593 02/11/12 Sev=Warning/2     CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination     192.168.1.255
Netmask     255.255.255.255
Gateway     172.16.1.1
Interface     172.16.1.101
3 15:53:13.593 02/11/12 Sev=Warning/2     CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100165, Gateway: ac100101.
4 15:54:30.425 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
5 15:54:31.433 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=172.16.1.101, error 0
6 15:54:32.445 02/11/12 Sev=Warning/2     CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
7 20:50:45.355 02/11/12 Sev=Warning/3     IKE/0xA300005F
Firewall, Cisco Intrusion Prevention Security Agent, is not running, the client will not send firewall information to concentrator.
8 20:50:50.262 02/11/12 Sev=Warning/2     CVPND/0xE3400013
AddRoute failed to add a route with metric of 0: code 160
Destination     192.168.1.255
Netmask     255.255.255.255
Gateway     172.16.1.1
Interface     172.16.1.100
9 20:50:50.262 02/11/12 Sev=Warning/2     CM/0xA3100024
Unable to add route. Network: c0a801ff, Netmask: ffffffff, Interface: ac100164, Gateway: ac100101.
I've already tried the suggestions from this link, although the problem is different there (as the user can still access the internet, even without split tunneling, which I cannot).
A show run shows the following output (note in the below I have tried a different VPN network: 192.168.3.0/24 instead of 172.16.1.0/24 seen in the Client log)
Result of the command: "sh run"
: Saved
ASA Version 8.2(5)
hostname AsaDWD
enable password kLu0SYBETXUJHVHX encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.2.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group DW-VPDN
ip address pppoe setroute
ftp mode passive
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.240
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
ip local pool DWD-VPN-Pool 192.168.3.5-192.168.3.15 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.2.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
vpdn group DW-VPDN request dialout pppoe
vpdn group DW-VPDN localname fa******@SKYNET
vpdn group DW-VPDN ppp authentication pap
vpdn username fa******@SKYNET password *****
dhcpd auto_config outside
dhcpd address 192.168.2.5-192.168.2.36 inside
dhcpd domain DOMAIN interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DWD internal
group-policy DWD attributes
vpn-tunnel-protocol IPSec
username test password ******* encrypted privilege 0
username test attributes
vpn-group-policy DWD
tunnel-group DWD type remote-access
tunnel-group DWD general-attributes
address-pool DWD-VPN-Pool
default-group-policy DWD
tunnel-group DWD ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:3e6c9478a1ee04ab2e1e1cabbeddc7f4
: end
I've installed everything using the CLI as well (after a factory reset). This however yielded exactl the same issue.
Following commands have been entered:
ip local pool vpnpool 172.16.1.100-172.16.1.199 mask 255.255.255.0
username *** password ****
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption 3des
isakmp policy 1 hash sha
isakmp policy 1 group 2
isakmp policy 1 lifetime 43200
isakmp enable outside
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 10 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 10 set reverse-route
crypto dynamic-map outside_dyn_map 10 set security-association lifetime seconds 288000
crypto map outside_map 10 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp nat-traversal
sysopt connection permit-ipsec
sysopt connection permit-vpn
group-policy dwdvpn internal
group-policy dwdvpn attributes
vpn-tunnel-protocol IPSec
default-domain value DWD
tunnel-group dwdvpn type ipsec-ra
tunnel-group dwdvpn ipsec-attributes
pre-shared-key ****
tunnel-group dwdvpn general-attributes
authentication-server-group LOCAL
default-group-policy dwdvpn
Unfortunately I'm getting the same "AddRoute failed to add a route with metric of 0: code 160" error message.
I'm very confused as this should be a pretty standard setup. I tried to follow the instructions on the Cisco site to the letter...
The only "differences" in my setup are an internal network of 192.168.2.0 (with ASA IP address 192.168.2.254) and PPPoE with DHCP instead of no PPPoE at all.
Does anyone know what's going on?

Yes, I have tried from a different laptop - same results. Using that laptop I can connect to a different IPSec site without issues.
Please find my renewed config below:
DWD-ASA(config)# sh run: Saved:ASA Version 8.2(5) !hostname DWD-ASAenable password ******* encryptedpasswd ****** encryptednames!interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 !interface Vlan2 nameif outside security-level 0 pppoe client vpdn group DWD ip address pppoe setroute !ftp mode passiveaccess-list inside_nat0_outbound extended permit ip any 192.168.50.0 255.255.255.224 pager lines 24logging asdm informationalmtu inside 1500mtu outside 1500ip local pool vpnpool 192.168.50.10-192.168.50.20 mask 255.255.255.0icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 0 access-list inside_nat0_outboundnat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutetimeout tcp-proxy-reassembly 0:01:00timeout floating-conn 0:00:00dynamic-access-policy-record DfltAccessPolicyhttp server enablehttp 192.168.2.0 255.255.255.0 insidehttp 0.0.0.0 0.0.0.0 outsideno snmp-server locationno snmp-server contactsnmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAPcrypto map outside_map interface outsidecrypto isakmp enable outsidecrypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400telnet timeout 5ssh 0.0.0.0 0.0.0.0 outsidessh timeout 5console timeout 0vpdn group DWD request dialout pppoevpdn group DWD localname *****@SKYNETvpdn group DWD ppp authentication papvpdn username *****@SKYNET password ***** dhcpd auto_config outside!dhcpd address 192.168.2.10-192.168.2.40 insidedhcpd enable inside!threat-detection basic-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptwebvpn enable outside svc enablegroup-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpngroup-policy dwdipsec internalgroup-policy dwdipsec attributes vpn-tunnel-protocol IPSec default-domain value DWDDOMusername user1 password ***** encrypted privilege 0username user1 attributes vpn-group-policy dwdipsectunnel-group dwdipsec type remote-accesstunnel-group dwdipsec general-attributes address-pool vpnpool default-group-policy dwdipsectunnel-group dwdipsec ipsec-attributes pre-shared-key *****tunnel-group dwdssl type remote-accesstunnel-group dwdssl general-attributes address-pool vpnpool!class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options !service-policy global_policy globalprompt hostname context no call-home reporting anonymousCryptochecksum:f5c8dd644aa2a27374a923671da1c834: endDWD-ASA(config)#

Unable to add account to Outlook 2010 for email address under custom domain

I am unable to add a new account in Outlook 2010 for an email account set up under a custom domain.
Can anyone explain why login credentials that work for outlook.com (successful access to email inbox) return an authentication failure (401 error) when used to test connectivity via https://testconnectivity.microsoft.com?
Details:
I set up a custom domain at https://domains.live.com and did the following DNS configuration steps at my web hosting company following instructions from domains.live.com:
Created custom MX record
Created CNAME record [name:] autodiscover.jrergonomics.com [value:] autodiscover.outlook.com.
I created email addresses at domains.live.com > jrergonomics.com > Member accounts and tested by successfully logging in to outlook.com.
When I try to add either account to Outlook 2010, I get a popup box with this information:
Title: "Windows Security"
Connecting to [email protected]
[[email protected]]
[ ] Remember my credentials
[ OK ] [ Cancel
The credentials that I use successfully to log in to outlook.com don't work here; I get the popup box 3-4 times and then the Outlook 2010 Add New Account dialog displays an error:
"An encrypted connection to your mail server is not available. Click Next to attempt using an unencrypted connection."
Clicking Next results in an error message:
"Problem Connecting to Server"
I have tried verifying the connectivity using https://testconnectivity.microsoft.com:
<?xml version="1.0" encoding="utf-8"?>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to test Autodiscover for [email protected]." resultdescription="Testing Autodiscover failed." additionaldetails="" elapsedMilliseconds="40517">
<children>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting each method of contacting the Autodiscover service." resultdescription="The Autodiscover service couldn't be contacted successfully by any method." additionaldetails="" elapsedMilliseconds="40517">
<children>
<testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="21181">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 64.90.49.188" elapsedMilliseconds="146">
<children />
</testresult>
<testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&v=ExRCA.1&id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.
" elapsedMilliseconds="21035">
<children />
</testresult>
</children>
</testresult>
<testresult status="Error" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover.jrergonomics.com/AutoDiscover/AutoDiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="4982">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="376">
<children />
</testresult>
<testresult status="Error" errorid="c716c7b4-a473-4ca4-8859-fc9c5bb12ad1" contentUrl="http://go.microsoft.com/fwlink/p/?LinkId=133210&v=ExRCA.1&id=B2E81FE1-5A94-4d07-9D58-AD483268A72A" testdescription="Testing TCP port 443 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The specified port is either blocked, not listening, or not producing the expected response." additionaldetails="A network error occurred while communicating with the remote host.
" elapsedMilliseconds="4605">
<children />
</testresult>
</children>
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to contact the Autodiscover service using the HTTP redirect method." resultdescription="The attempt to contact Autodiscover using the HTTP Redirect method failed." additionaldetails="" elapsedMilliseconds="14148">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover.jrergonomics.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.244.217, 157.56.234.137, 157.56.236.89, 157.56.240.137" elapsedMilliseconds="21">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 80 on host autodiscover.jrergonomics.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="59">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is checking the host autodiscover.jrergonomics.com for an HTTP redirect to the Autodiscover service." resultdescription="The redirect (HTTP 301/302) response was received successfully." additionaldetails="Redirect URL: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml

HTTP Response Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Location: https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml
" elapsedMilliseconds="45">
<children />
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to test potential Autodiscover URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml" resultdescription="Testing of this potential Autodiscover URL failed." additionaldetails="" elapsedMilliseconds="14021">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Attempting to resolve the host name autodiscover-s.outlook.com in DNS." resultdescription="The host name resolved successfully." additionaldetails="IP addresses returned: 157.56.241.102, 157.56.232.166, 157.56.245.70, 157.56.245.166, 157.56.236.214, 157.56.236.6" elapsedMilliseconds="191">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing TCP port 443 on host autodiscover-s.outlook.com to ensure it's listening and open." resultdescription="The port was opened successfully." additionaldetails="" elapsedMilliseconds="84">
<children />
</testresult>
<testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Testing the SSL certificate to make sure it's valid." resultdescription="The certificate passed all validation requirements." additionaldetails="" elapsedMilliseconds="248">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server autodiscover-s.outlook.com on port 443." resultdescription="The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate." additionaldetails="Remote Certificate Subject: CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US, Issuer: CN=Microsoft IT SSL SHA2, OU=Microsoft IT, O=Microsoft Corporation, L=Redmond, S=Washington, C=US." elapsedMilliseconds="163">
<children />
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Validating the certificate name." resultdescription="The certificate name was validated successfully." additionaldetails="Host name autodiscover-s.outlook.com was found in the Certificate Subject Alternative Name entry." elapsedMilliseconds="1">
<children />
</testresult>
<testresult status="SuccessWithWarnings" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Certificate trust is being validated." resultdescription="The certificate is trusted and all certificates are present in the chain." additionaldetails="">
<children>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US." resultdescription="One or more certificate chains were constructed successfully." additionaldetails="A total of 1 chains were built. The highest quality chain ends in root certificate CN=Baltimore CyberTrust Root, OU=CyberTrust, O=Baltimore, C=IE." elapsedMilliseconds="34">
<children />
</testresult>
<testresult status="Warning" errorid="1339c33a-8f21-427b-a323-4cee1a13f517" contentUrl="" testdescription="Analyzing the certificate chains for compatibility problems with versions of Windows." resultdescription="Potential compatibility problems were identified with some versions of Windows." additionaldetails="The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled." elapsedMilliseconds="4">
<children />
</testresult>
</children>
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Testing the certificate date to confirm the certificate is valid." resultdescription="Date validation passed. The certificate hasn't expired." additionaldetails="The certificate is valid. NotBefore = 2/18/2014 11:41:01 PM, NotAfter = 2/18/2016 11:41:01 PM" elapsedMilliseconds="0">
<children />
</testresult>
</children>
</testresult>
<testresult status="Success" errorid="00000000-0000-0000-0000-000000000000" contentUrl="" testdescription="Checking the IIS configuration for client certificate authentication." resultdescription="Client certificate authentication wasn't detected." additionaldetails="Accept/Require Client Certificates isn't configured." elapsedMilliseconds="804">
<children />
</testresult>
<testresult status="FatalError" errorid="734044ef-11c2-4e30-9ee6-450d49e9d92c" contentUrl="" testdescription="Attempting to send an Autodiscover POST request to potential Autodiscover URLs." resultdescription="Autodiscover settings weren't obtained when the Autodiscover POST request was sent." additionaldetails="" elapsedMilliseconds="12692">
<children>
<testresult status="FatalError" errorid="6c458392-3a8c-4bc2-942e-7ab533744106" contentUrl="" testdescription="The Microsoft Connectivity Analyzer is attempting to retrieve an XML Autodiscover response from URL https://autodiscover-s.outlook.com/Autodiscover/Autodiscover.xml for user [email protected]." resultdescription="The Microsoft Connectivity Analyzer failed to obtain an Autodiscover XML response." additionaldetails="An HTTP 401 Unauthorized response was received from the remote Unknown server. This is usually the result of an incorrect username or password. If you are attempting to log onto an Office 365 service, ensure you are using your full User Principal Name (UPN).
Headers received:
RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c
X-DiagInfo: CH1PRD0910CA013
Content-Length: 0
Cache-Control: private
Date: Mon, 31 Mar 2014 04:57:26 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Basic Realm=""
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET


HTTP Response Headers:
RequestId: 842d50d9-3e33-4627-8804-98fa0b02070c
X-DiagInfo: CH1PRD0910CA013
Content-Length: 0
Cache-Control: private
Date: Mon, 31 Mar 2014 04:57:26 GMT
Server: Microsoft-IIS/7.5
WWW-Authenticate: Basic Realm=""
X-AspNet-Version: 2.0.50727
X-Powered-By: ASP.NET
" elapsedMilliseconds="12691">
<children />
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>
</children>
</testresult>

Hi,
Since this is an Exchange forum and your issue is related to domain.live.com, I recommend you contact with domain.live.com support to get quicker and more professional help：<cite class="_Vc">https://domains.live.com/support/
</cite>
Thanks for your understanding in advance.
Best regards,
Angela Shi
TechNet Community Support

How do i allocate more memory to my iphoto application? i am unable to add more photos to my library i keep getting a pop up saying not enough memory in my application

how do i allocate more memory from my hd to my iphoto application? i have over 80 gb on my hard drive, but only 1.7 gb allocated to my iphoto application & i am unable to add more photos to my library. i keep getting a popup that says not enough application memory.

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Suddenly, I am unable to add photos to my project in Imovie 11. I have an IMac Snow Leopard 10.6.8 and have made several movies where this worked fine but for some reason, it has quit. Everything seems to be working fine except that?

I'm an oldtimer and have had this Mac for less than 2 yrs and have LOTS to learn - but I've climbed the curve a little. !'ve made several movies and published to YouTube and burned to disc using IDVD with reasonably good results. Each time I have added stills to my movies it has worked fine - but tonight, I'm suddenly unable to add them. I click "Photos" - select my photo - left click the photo and drag into the project while holding the click. Have the green "+" and the green highlight and even get the green vertical bar in the project but when I release the click, the photo simply disappears! One "clue" here may be this: I was able to add one still to this project and the only diff between it and the other still thumbnails now is that there is a "green check mark" on the thumbnail of the one successfully added. Any suggestions? (I do have the "advanced tools" option selected in IMovie Preferences.)
Thank you so much for any help at all.
Sam

Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W

WS-Security and proxy service: Unable to add security token for identity

What the reason of "Unable to add security token for identity" fault in this situation (10.3.1):
I did simple "hello word" proxy service and tried to apply custom policy binding.
WS-Policy is next:
<wsp:Policy wsu:Id="WS-Policy-Siebel"
     xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
     xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
     xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
     <wssp:Identity
          xmlns:wssp="http://www.bea.com/wls90/security/policy">
          <wssp:SupportedTokens>
               <wssp:SecurityToken
                    TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken">
                    <wssp:UsePassword
                         Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" />
               </wssp:SecurityToken>
          </wssp:SupportedTokens>
     </wssp:Identity>
</wsp:Policy>
Process WS-Security is setted to "yes".
While debugging I see that all works fine - I can authenticate with defined credentials and breakpoints in proxy service flow works fine.
But at the end I get the fault:
Soap fault:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>Unable to add security token for identity</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
In console:
<09.06.2010 17:39:18 MSD> <Error> <OSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: F
ault, message-id: 1721282272521583996--57dc4ccc.1291cc2282d.-7fab, proxy: OSB Project WS-Security/WSSecurityService, operation: NewOperation]
--- Error message:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault><faultcode>env:Server</faultcode><faultstring>Un
able to add security token for identity</faultstring></env:Fault></env:Body></env:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Unable to add security token for identity
at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
Truncated. see log file for complete stacktrace
Incoming soap message is:
<soapenv:Envelope      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header      xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security      soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken      wsu:Id="unt_TNNp0cBwU7HyPKoq" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>testuser</wsse:Username>
<wsse:Password      Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">testuser</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<wss:NewOperation      xmlns:wss="http://www.troika.ru/Enterprise/WSSecurityService/">
<in>string</in>
</wss:NewOperation>
</soapenv:Body>
</soapenv:Envelope>
Edited by: Andrey L. on Jun 9, 2010 5:55 PM

I thought you were getting that exception when accessing the proxy.
No. Authentification works fine. Proxy body works fine. But at the end of proxy appears the exception.
Sorry for my english - I tried to show this situation on image: http://imglink.ru/show-image.php?id=9c0e0c1719f00289faf11696c6703bc3
Are you getting this exception when routing to a business service which is configured for WS-Security ??
I don't use business service in this test project - only simple proxy service with all logic inside.
PS transformation in replace action is very simple too:
(:: pragma bea:global-element-parameter parameter="$newOperation1" element="ns0:NewOperation" location="WSSecurityService.wsdl" ::)
(:: pragma bea:global-element-return element="ns0:NewOperationResponse" location="WSSecurityService.wsdl" ::)
declare namespace ns0 = "http://www.troika.ru/Enterprise/WSSecurityService/";
declare namespace xf = "http://tempuri.org/OSB%20Project%20WS-Security/Hello/";
declare function xf:Hello($newOperation1 as element(ns0:NewOperation))
as element(ns0:NewOperationResponse) {
<ns0:NewOperationResponse>
<out>Hello, { data($newOperation1/in) }!</out>
</ns0:NewOperationResponse>
declare variable $newOperation1 as element(ns0:NewOperation) external;
xf:Hello($newOperation1)
Edited by: Andrey L. on Jun 10, 2010 12:21 PM

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Unable to add a new track in Garageband 10.0.2

Hi, I'm using the latest version of Mavericks and Garageband 10.0.2. I'm unable to add a new track.
I repeatedly hit the + button, I go into the menu and hit "add a new track," I try to use keyboard shortcuts, and nothing seems to work.
Yesterday when I tried to create an "empty project," it wouldn't allow me to start the session, instead it gave me this error code, "The specified number of tracks could not be created. Reduce the number of tracks to create, then try again."
I restarted my computer and tried again today, and I don't get the same error, but am still not able to add tracks. Not sure what's going on. Restarted it a couple of times and I'm still getting the same issue.
Any help would be awesome.

'musical typing keys'
The musical typing is a legacy instrument from GarageBand '11. You can use it, and drop samples to the keys, but GarageBand 10.0 does not save the patch. If you still have GarageBand '11 installed, create the custom sampler instrument in GarageBand '11 and save it there. It will appear in the library in the "User Channel Strip Section" category.

Path issue leaving me unable to add blog post content in design view

Hi guys,
I am unable to add blog post content in design view when a template is applied to my blog. BC support have told me they fixed the problem by making minor changes to the paths of the css and javascript files and then told me to post on here for the solution.
When I call the files using <link rel="stylesheet" href="/css/custom.css" /> everything displays perfectly but in BC I can't add blog post content in design view. I can edit in html but this isn't ideal for clients to update the blog.
If I change the paths to <link rel="stylesheet" href="css/custom.css" /> it fixes the problem and I can then edit blog content in design view but all blog pages that are in folders display incorrectly. Only the main blog page display properly.
I'm sure the answer is simple but I can't find it so any help would be greatly appreciated. Thanks
Pete

I took a look at your page URL and can't find any CSS issues or styles that would directly affect you editing/adding content to a blog post via the content editor.
Make sure you either clear your cache or try in another browser to see if the problem is localized to your current browser.
If you still have the problem can you link me to a screencast (you can use Jing if you don't have a screencast program: http://www.techsmith.com/jing.html) of what you are experiencing?

Unable to add AP Invoice

Unable to add AP Invoice based on a Purchase order or even directly for one particular item.
We get the following error
Stock Account is not defined [ AP Invoice Rows- Warehouse Code] Line 2 'Item Code' Message Message 173-77
We are unable to create goods issue,goods transfer or Goods Receipt for this item
Regards
Farheen

Hi Rekha........
As you know there are three types of GL Accounting Method.
1. Warehouse
2. Item Group
3. Item Level
If you are doing Purchase Invoice or GRN then you have to set all the stock related accounts.
For GRN at least set Inventory account, Allocation Account, Purchase Account and Purchase Offset Account.
For AP Invoice Based on GRN Sundry Creditors, Tax Accounts, Cenvat Clearing Account, Rounding Off.
For Delivery set Cost of goods sold, Inventory account,
For AR Invoice set Sundry debtors, Revenue account, Rounding Off
If ur GL method is set by Warehouse then define those acocunts at warehouse level.
If ur GL method is set by Item Group then define those acocunts at Group level.
If ur GL method is set by Item then define those acocunts at Item level.
This will solve your problem.....
Regards,
Rahul

Unable to add aspx file to document library using REST and JSOM in SharePoint Hosted App

Hi,
I am unable to add an aspx file to document library. I was actually trying to create a WIKI page and upload to Pages library but that wasn't working so I tried simple document library. It keeps failing with Access Denied error. I have checked
the blocked types and aspx is not included. I can upload it directly from the browser so that shouldn't be the case. I have read that it can be achieved with CSOM but I need this to work with a SharePoint Hosted App. Here is my JSOM:
factory = new SP.ProxyWebRequestExecutorFactory(appweburl);
context.set_webRequestExecutorFactory(factory);
appContextSite = new SP.AppContextSite(context, hostweburl);
oWeb = appContextSite.get_web();
oList = oWeb.get_lists().getByTitle('Documents');
fileCreateInfo = new SP.FileCreationInformation();
fileCreateInfo.set_url("mywiki.aspx");
fileCreateInfo.set_content(new SP.Base64EncodedByteArray());
fileContent = "<%@ Page Inherits=\"Microsoft.SharePoint.Publishing.TemplateRedirectionPage,Microsoft.SharePoint.Publishing,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c\" %> <%@ Reference VirtualPath=\"~TemplatePageUrl\"
%> <%@ Reference VirtualPath=\"~masterurl/custom.master\" %>";
for (var i = 0; i < fileContent.length; i++) {
fileCreateInfo.get_content().append(fileContent.charCodeAt(i));
newFile = oList.get_rootFolder().get_files().add(fileCreateInfo);
context.load(newFile);
context.executeQueryAsync(function () {
alert('yo');
}, function (sender, args) {
alert(args.get_message() + '\n' + args.get_stackTrace());
If I change the file extension to "txt", it works. Same with REST implementation, it works with "txt" but fails with "aspx". Maybe what I am trying to do will not work using JSOM or REST. Any suggestions? Your
help is always appreciated.
Regards,
kashif

Your code works fine in both my on-premises and SharePoint Online. I have given the app full control, so I suspect this is a permissions issue. I would check your permissions on your appmanifest. Must be something to do with publishing permissions. Try
giving full control and work the permissions down.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

Creating a Book from selected images in Aperture browser creates empty book

I have been a happy user of Aperture 2 for several weeks now but I have been stumped by a problem when I come to layout a book. Help please!
The problem is that any book I create contains no pictures in the aperture browser - so I can't add anything to my empty books. I have tried everything to get images into my book but nothing works. What is odd is that Projects tab I see that the total number of photos I selected at book creation time is given correctly. I just can't see any in the browser.
I have also tried to drag and drop pictures into the book pages and the project folder but nothing happens.
Any help is much appreciated.
Steve

Hi Thomas,
Thanks so much for replying.
In answer to your question - the bottom bar of the browser does not say anything - and yet the Projects tab lists the book and also the number of images that I selected when I made the New -- Book from the pull down menu option.
I also tried to add images to the book's browser by drag and drop from another project or folder to the name of the book project in the project list. It doesn't work for me.
Very odd as I have been happily importing, exporting and publishing web galleries for several weeks now.
FYI, my Aperture library is about 100 Gb in size with 7,700 photos. I run OS X 10.5.3 on my Intel MacBook Pro 17 inch with 6TB of firewire connected disks.
Any help or ideas are very much appreciated.

Why am I unable to add an outlook (email) account to my Imac which is running OS Maverick?

Why am I unable to add an outlook account to my Imac which is running OS Maverick?
I recently opened an outlook email account which I have paired with my phone. Which is probably because on the Iphone there is an option for “outlook” when setting up an email account. However, when I go to add the email account to my imac there is no option for “outlook”. There is however an option for “exchange” which I may have tried to use however it asks for server information which I do not have.
I also tried to populate the add another account feature however it still don’t seem to recognise the email account.
Can some help? What am I do wrong? v

The OP is talking about an Outlook.COM Email address. Not MS Office Outlook.
To the OP:
You have not entered the Outlook.com Server addresses correctly.
Gary Scotland wrote:
Outlook is a Microsoft application, part of MS Office, its not an email service.
You will need to enter the logon information (username, password and the name of the incoming and outgoing server names). The ISP that provides your email service, ie Virgin Google Yahoo will have this information on their website support page.

Browser Sets Empty Unable to Add

Similar Messages

Maybe you are looking for