Browser showing all the outside of the artboard stuff

Hi guys,
Just wanted to ask why the browser shows all the outside-of -the -artboard stuff I cut off in Photoshop? How to get rid of it? I cut off all the unnecesary things in Photoshop but Catalyst is showing that, and when I hit Cmnd Return so does the browser.. Anyone can help? Here's the screenshot:
Thank you

Did you modify any of the html that embeds the Flash Catalyst swf? That might be source of the bleed.
Chris

Similar Messages

I did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)

i did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)

You downloaded Adobe... what? Adobe has tons of applications.
Which Adobe product did you download?
Clinton

How to show all the rows of a report in one page

My report has 30 rows, by default it just show 15 rows. I want to show all the rows just in one page, without cliking link or arrow to see the left.
In the Layout and Pagination:
Report Template: template: 15. Standard Report (PPR)
Pagination Scheme: Row Ranges X to Y (no pagination)
Display Position: Bottom - Right
Number of Rows: 1000
Number of Rows (item) 1000
Maximum Row Count: 1000
How to fix it?
Thanks.
Jen

Ok, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx!

Summary report to show all the software components and version installed

We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!

Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

How to show all the rows in a report

I have a report, and i want to show all the rows in a page, how to do it. Currently, i just show part of rows.
Thanks,
Jen

Jen,
I'm guessing you are using Application Express,...
Go to the region where the report is located, go to report attributes. In the "Layout and Pagination" section there is a setting called "Number of Rows". Change the setting, and that's it.

How can I show all the results returned by a sql query?

Hi guys,
I need your help.
Let's say I have one table: TableA. Fields of TableA are aleg, anon, apes. The following sentence can return, in general, several rows: select anon from TableA where aleg = somevalue. I'd like to show the result of column anon but no luck. If I try to show the results in a TextArea and the origin is an sql query only shows the first row value. I tried Show as: show as text (based in PLSQL) and coding an anonymous plsql block as
DECLARE
v_anon TableA.anon%TYPE;
CURSOR v_cur IS
select anon from TableA where aleg = somevalue;
BEGIN
OPEN v_cur;
LOOP
FETCH v_cur INTO v_anon;
EXIT WHEN v_cur%NOTFOUND;
:FIELD_IN_FORM := v_anon;
END LOOP;
CLOSE v_cur;
END;
but in this case it's not shown any result.
So the first question is what kind of field should I use to show the result. And the second one is what can I do to being able to show all the results returned by the query (provided that is more than one single row).
regards

Hi Denes,
Just starting with apex. I think I know how to show the results in a report region. I've simplified the posted question.
A more detailed question would be: Suppose you have a region where you have put several text areas to accommodate the result of a multi-column query (lets say for TableA) that only returns one row, each column value returned put in a different text area. Also you want to show the values of other fields in TableB that depends on some value just retrieved from TableA and that you want all values retrieved (from TableA and the linked TableB) to be show in the same region. Is that possible? If yes, how?
Thank you in advance

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

TS1967 I have just bought a new computer and downloaded latest version of itunes. It has all installed fine, but when I sync my ipod, it shows all the songs but won't play any of the songs in that library. Also, I can't add new files.

I have just bought a new computer and downloaded the latest version of itunes. It has all installed fine, but when I plug my ipod and sync it, the music library shows all the songs and videos that are on there, but won't let me play them. Also, I can't add any new songs to the same library. It saves them elsewhere. I have had the previous version on another computer and it worked just fine. I have been online trying to find an answer but nothing. Hope someone can help me. Thanks

Installing iTunes does not cause content to magically appear on the computer.
Your media is only where you put it.
iOS devices are not backup devices.
Copy the media from the old computer to the new computer.

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

ALV not showing all the rows! Please help!

Hi Experts,
     I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
      I have coded like this:
      lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopal

did you somehow manage to set the "first visible row" property on table object
to 2.   Only thing I can think of that could cause this effect.
Cheers
Phil

HT203167 I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

I have just downloaded the latest itunes version (11.0.1). All my data cannot now be located, though the library is showing all the correct content.The data is stored on an external hard drive. How do I tell the library where to find it's data?

The iTunes application should be installed on the system drive. You may need to repair iTunes to fix that error regarding a missing .exe.
To organize your library properly see Make a split library portable.
If you don't have a working version of the library that can be transformed into a portable shape I have tools and techniques that can repair the broken links.
tt2

Execute Process Task showing all the SSIS Config variables in SQL Job History

Hi,
Am using an Execute Process task to execute my child package. And executing the Parent package from a SQL JOB.
I am using the same config file for both Parent and Child packages.
After the Job execution was Successful / Failure, in Job history it is showing all the variables from Config file which are not using in Child package. With the below message.
"The package path referenced an object that cannot be found"
I don't want to catch all the Variables information in Job History. Instead I need only the Success / Failure message.
PFA Screen.
Thanks,
Sailaja

see
http://www.mssqltips.com/sqlservertip/1417/custom-logging-in-sql-server-integration-services-ssis/
https://www.simple-talk.com/sql/ssis/ssis-event-handlers-basics/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

When saving my illustrator file to a pdf it doesnt show all the artwork ie boxes are hidden in the pdf or only showing part of them. How can I fix this?

when saving my illustrator file to a pdf it doesnt show all the artwork ie boxes are hidden in the pdf or only showing part of them. Even some text is hidden. I have flattened the artwork so everything is in one layer. How can I fix this?

Hi John
I have indicated on the attached jpeg where the problem is, basically a line of text is missing at the top and part of the feeding diagram is missing. I created the artwork in different layer and then flattened. All text has been converted to outlines, however the areas being affected have no transparency, I have used solid fills or no fills. I get the same result when I export the file as a jpeg. Hope you can help.

Service monitoring is not showing all the services when i create a service monitor under Management pack templates.

Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801

Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801

Browser showing all the outside of the artboard stuff

Similar Messages

Maybe you are looking for