Browser sound not routing via external interface

I am running an external audio interface which IS selected as output in sound settings.
When using iTunes or any other audio software, the sound routes properly via the interface.
However, sound from my browsers all seem to route via the Powermac internal speaker, and i cant seem to find out why or where to set it to route via the interface.
Help!!!

Similar Messages

HP 4330s SRS Premium Sound not working with External Speakers

And this is my second topic and rant!
The SRS Premium sound driver doesn't work with USB Speakers.
It doesn't work with Bluetooth speakers either!
In other words it only works with the Laptop speakers.
ARE YOU KIDDING ME!
SRS Premium sound for Deeper Bass and Clear sound enhancement bla bla bla now in you HP Laptop
but ONLY with your LAPTOP SPEAKERS!
ARE YOU KIDDING ME!
DEEP BASS on these cell phone speakers!!! Really???
Why doesn't the SRS Premium Sound driver work with external speakers!
I believe I have used SRS Sandbox before and ALL THE SOUND was directed to that driver and it worked with everything!
WHY DOESN'T YOUR HP DRIVER WORK WITH EXTERNAL SPEAKERS!
Is everyone in HP a bloody RETARD?
FIX YOUR DRIVERS!
End of rant!

Oh BTW {Content Removed: rant} http://www.srslabs.com/landing.aspx?id=693#23
23. Will the SRS Audio Sandbox work with my USB speakers or Bluetooth speakers?
Yes, the current version, 1.6.6.0 will work. If you have a previous version that is not working with these speakers, please upgrade to this version.
Do you have anything else to share with me {Content Removed: rant}

Browser sound not working when webcam is connected

Hi,
The other day I got a USB logitech webcam and I was able to get it working on my arch Linux. However, I'm having problems with the sound. When I plug in my webcam to my computer, there won't be any problem if my computer was already running, but if I plug in my USB webcam before starting my computer, the sound for browsers won't work at all. I thought it was Flash related issue, but I noticed that Chromium cannot play html5 videos, either. On the other hand, Amarok and other applications have no problem with the sound.
My other issue is with the volume manager. My keyboard has a button for adjusting the volume, but if my webcam is connected, it won't be able to adjust the volume for my speakers. When I try to use this button, the picture for volume adjustment shows up with an empty bar.
I think there's a conflict between my PCI sound card and the microphone of my USB webcam. Any idea how to resolve this issue?
Thanks

It's not the browser issue. It's an issue with the order of the cards.
Sometimes The webcam goes as HW0 and the system try to use that rather than your sound card.
Quickest fix:
Edit /etc/modprobe.d/sound.conf
Add:
alias snd-card-0 snd-whatso-ever
alias sound-slot-0 snd-whatso-ever
Where snd-whatso-ever is your... sound card.
To find it use:
ls -l /sys/module/snd/holders
Farther reading:
http://wiki.archlinux.org/index.php/Als … sound_card

Sound not playing via HDMI.

I have a HP ENVY TouchSmart 14-k074ca Sleekbook running Windows 8.1. When I connect it to my TV, the picture works fine, but the audio will not play on the TV. I have gone into playback devices but there is no option for playing through the TV. I have checked "Show Disabled Devices" but nothing shows up. I have tried this with different HDMI cables and TV's, so I know the problem is with the computer.
Any ideas on how to fix this? Thanks in advance.

Hi there @mcbronson
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
If the HDMI audio does not appear as a playback device, you should try out this page:
High Definition Media Interface (HDMI) Icon Disappears from the Sound Properties in the Control Pane...
Troubleshooting HDMI Display and Sound Issues
Another possibility is that the driver needs to be updated or refreshed, and possibly the BIOS as well. You can find the most current HP customized drivers here:
HP ENVY TouchSmart 14-k074ca Sleekbook - Software & Drivers
I hope this helps.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

Can't browse some older backups via Time Machine interface

Problem started after updating to Yosemite. I am running 10.10.1. I can find all my backups, going back to 2010 in fact, when browsing my external FW800 hard drive directly in the Finder. But if I click the menubar icon and choose "Enter Time Machine," I can see some recent backups for some folders, but I cannot access some older backups that I know are there on that same drive. The window title bars in the TM interface are totally grayed out for those older backups. But again, there are all on the same FW800 external HD, and I can search them just fine and extract the files just fine using the Finder.
Is the Time Machine interface totally broken in Yosemite?
Clearly there is nothing wrong with my external FW800 HD, otherwise I wouldn't be able to manually browse and extract files via the Finder. And yes, it makes regular TM backups every day too. It's only the "Enter Time Machine" UI that is partly broken. I say "partly" because some backups (very recent) display, but I cannot access all the backups. It's very strange.
Any thoughts would be appreciated.
Thank you.

We need some clarification on what your requirements might be, since you state that you want to be able to open Time Machine and see backups that were made since you installed Yosemite.....AND....older backups on the drive that were made before you installed Yosemite.
When Yosemite is installed it is supposed to add all of the data included in the Yosemite operating system and combine that with your history of backups with other operating systems. For a number of reasons.....Yosemite does not always do this.....so what happens is that Yosemite starts a whole new "master" backup of your Mac at the time and then begins to add incremental backups since Yosemite has been installed.
When that happens, and you click Enter Time Machine from the menu bar at the top of the screen, you will only see the backups that have been made since Yosemite was installed. Other backups are grayed out on the Time Machine interface display and cannot be accessed......even though the backup data is present on the hard drive, and you can see the data or folders displayed using the Finder.
If you want Time Machine to display current backups.....AND....older backups when you click Enter Time Machine, your only option would be to try to reinstall Yosemite to see if the new installation will display current backups and older backups on the same Time Machine interface.
There is absolutely no assurance that this will be successful if you try it. Your call on that.
What might work......IF.....you can lower your requirements to have both new and old backups displayed on the same Time Machine interface.....and instead have current Yosemite backups displayed on one Time Machine interface and the older backups on another, or separate Time Machine interface.......is to try the Browse Other Time Machine Disks option.
You do not mention at all whether or not you have tried the Browse Other Time Machine Disks in this post or in your video. I assume that you tried this, since it is mentioned in Pondini's documentation and also other Apple Time Machine documentation, and it also did not work for some reason.
But, if you have not done this......and you can lower your display requirements......you might want to try.
1) From your normal Mac desktop, make sure that the "dock" , normally at the bottom of the screen, is displayed......and that the Time Machine icon is displayed there as well.
2) Control-Click.....or.....Right-Click the Time Machine icon to see if an option to Browse Other Time Machine Disks is displayed
3) Click on Browse Other Time Machine Disks
4) If an option to use another disk is displayed, click on the disk to highlight it, then click Use This Disk
What happens when you do this?

How to Port forward your router via browser

I Am having trouble port forwarding 19132 and I tried using airport extreme to port forward but everyTime I connect using my external ip it just fails.
i Have port forwarded the port, and I did it correctly, hence I watched a few videos before and after. so I need to know how to port forward 19132 via browser.
i Learned how to open the the config of the router via browser, or so I thought. I need to allow google access to my network, but I don't know how.
please help.

This is for Apple routers which do not use browser setup.. you must use the airport utility for any setup.
There is particular advice by the section GURU.. Tesserax on how to port forward in apple routers.
Finding the tips is now an exercise though.
AirPort - Port Mapping Basics using AirPort Utility v6.x

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.

Belkin wireless router connected but browser could not find the host server

my new roommate has a belkin n wireless router connected to a cable modem which functions perfectly on her pc laptop. i am trying to connect my MacBook Pro to the router using her WEP password. this all works fine and my System Preferences/Network/Status shows that AirPort is connected with full strength, but i cannot load any web pages (i have not yet been able to load any pages at all using this router). the page load error reads "Firefox can't find the server at www.cnn.com" and "The browser could not find the host server for the provided address".
I spoke with Belkin support and they say the router is functioning properly, that is a problem with my mac.
When I go to Network Diagnostics, the status shows all green and says "This computer's Internet connection appears to be operating normally. Are you sure you want to use Network Diagnostics?
Could this be a firewall issue? A couple people have suggested that, but I'm not sure how to fix that.
I have tried rebooting the router and cable modem, rebooting the mac, etc.
any ideas on what settings i may need to investigate??
thank you!
Message was edited by: photoeyeseattle

photoeyeseattle wrote:
how do I know if the router has useful DNS servers? i am looking at the settings of the router on the pc that is online.
Somewhere in the settings of the router should be the DNS servers that it is using. Since the router is offering via DHCP to do DNS translation for your Mac, it must have useful DNS servers listed.
There are "public" DNS servers. I have no experience with it, but this Web page describes one from Google:
http://code.google.com/speed/public-dns/
Supposedly Google has a DNS server at IP addresses 8.8.8.8 and 8.8.4.4 that you might try. Since the DNS server setting on your Mac is grayed out, as a test you might try noting the setting in the "TCP/IP" tab of your AirPort connection item of the Network panel of System Preferences. Then switch from "Using DHCP" to "Manually", fill in the values you just noted, switch to the DNS tab and fill in Google's DNS addresses, and see if things work better.
do you have any other suggestions of where to seek help???
Perhaps a Belkin discussion group?

External proxy routing via MAC-LIST PERMIT

I have a school class where I want to provide internet connectivity.
Only certain computers should be able to connect to the internet, based on the allowed MAC address.
Of those who are allowed to connect to the internet, all browsing needs to go via an external proxy-server, for example ws.proxyserver.com:8080. Normally such an option can be set in the browser setup, but I would like this be set in the router.
Additionally, another computer should be able to access the internet without going via the external proxy.(Voip calls)
I saw that the CISCO 877 and PIX Firewall 501 and similar products that support the IOS CLI have the MAC-LIST PERMIT option but I don't know if and how the external proxy-server via can be accomplished.

Refer the command reference of the pix for more details about this command.
http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/mr.html#wp1116289

External interface.call is not working

hi, i am trying to call one java script function in
actionscript by using External interface.call method. but its not
working .can u pls tell me why this happend

"angadala" <[email protected]> wrote in
message
news:gmpc58$g9p$[email protected]..
> skill status.mxml
>
>
> <mx:Script>
> <![CDATA[
> if (ExternalInterface.available) {
> ExternalInterface.call(getDataFromXml);
> }
>
> it is javascript
> <script type="javascript">
> var data = new Array();
> data[0]=[1,2,3];
> function getData()
> {
> return data;
> }
> </script>
> </head>
> <body>
> <div id="SkillStatus">
> <p>Alternative content</p>
> </div>
>
> </body>
> </HTML>
>
1) Your JavaScript function name and the function name you
are calling
don't match.
2) On the Flex side, you are calling a JS function that I
think you are
expecting to return a value, but not assigning the result of
the value to a
function.

A extra field, which not evaluate in APO - R/3 via CIF Interface

Hello all,
in one of our project a question came up:
Scenario:
A customer send us the requirements for weeks as an xml file. This xml file contains a field with a specific number for this requirements (each file as the same number). We send all information to APO - BW. And than via CIF - Interface into the R/3 System.
So far so good, but now we have to send back a suggestion to the customer include the certain amount and delivery date and the specific number field. The certain amount and the delivery date ...-> no problem. But we lost the specifc number. The reason behind is, that our APO Specialist mentioned, that are no possibilities to bring the field from the APO-BW via CIF to R/3. But I couldn't belive it.
So my question is now, maybe it is possible to put the number in a field, which we can pass-through features to R/3.
Thanks
Kind regards
Stephan

Hi Stephan - I also agree that this is not standard functionality in SAP. However you can move customer specific data from APO into R3 using the CIF with CIF enhancements. Most or all transactional data enhancements have extension tables where SAP customers can move non-SAP defined data through the CIF. Look in customizing for enhancements and also identify the APO-BW tables where your data is stored. A developer should be able to take it from there. One thing to think about is where in R3 you want to store this data - make sure there is a field available or some logic to receive the data.
Regards
Andy

How do you switch output sounds set to my external monitor that is connected via HDMI.

How do you switch output sounds set to my external monitor that is connected via HDMI.

Hello gail from Ajijic,
If you'd like to change the audio output of your Mac, you can do so by accessing the Sound preferences in your System Preferences.
Before you start, open the Output pane of Sound preferences (choose Apple menu > System Preferences, click Sound, then click Output).
Choose a sound output device
From the list of sound output devices, select the one you want to use. All sound output devices available to your Mac are listed, including the computer’s internal speakers, devices plugged into your computer’s sound port (), USB speakers, and AirPlay devices.
For any device plugged into the computer’s sound port, choose Headphones.
OS X Yosemite: Adjust your computer’s sound output settings
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

I want to install yosemite via external hd but my internal hd is not showing in the utilise disk

please help i think I'm stuck
Have been trying every way i know and found on internet to install os x yosemite on my macbook pro 2.4GHz the final method i tried is to install via external hd since my new hdd don't have recovery on it i boot in successfully with the external hdd but my internal hdd is not showing up so i can not install on it. pleas help.

It would be helpful if you indicated the EXACT model/year MBP that you have and the current OSX>
What is preventing you from installing Yosemite directly to the internal HDD?
Ciao.

Mgmt Via Dynamic Interface not working on 5505 version 7.2.111.3

Folks,
         I have posted this question a couple of times on the forum but did not get a solution. I am trying to manage my 5508 controller from a dynamic interface which is assigned to port 7 of the controller. I have a switch connected to that port which has a PC on the same subnet as the dynamic interface. From the PC, I can ping the dynamic interface IP Address, but can not telnet,SSH,http or https to it. There is no clear doc that specifics how to effectly use the command "config network mgmt-via-dynamic-interface" command.
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Enable
Interface Name                   Port Vlan Id IP Address      Type    Ap Mgr Guest
173                                      7    173      172.16.101.100 Dynamic Yes    No
management                         1    172      172.16.100.100 Static Yes    No
service-port                           N/A N/A      0.0.0.0         DHCP    No     No
virtual                                    N/A N/A      1.1.1.1         Static No     No
7 Normal Forw Enable Auto       1000 Full Up     Enable N/A     1000BaseTX
Any guidence would be highly appreciated.

Im having a similar issue and have 2 TAC cases open.
TAC CASE#1: issue is that even when disbaled I can still access the dynmic interface via HTTPS/HTTPS/TELNET/SSH. But this is on a WISM1.
Thanks a lot for your quick and prompt response, I see that there is an internal Bug with an ID CSCty32586.
I see that the bug is fixed told be fixed in 7.0.230.0, but it’s not fixed. The bug is fixed in 7.2.x version.
I understand that you are using Wism on which 7.1.x version and above is not supported.
As 7.0.235.3 is released recently to overcome some of the changes and to fix some of the Bugs with older version on these devices.
Kindly try to upgrade the software version of the WLC to 7.0.235.3 and check the compatibility.
Please do let me know in case of any concerns and I will be glad to assist you.
TAC CASE#2: Just like you I can not access the dynamic interface. Still working that one .. The holiday dropped when I just opened that case.
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Browser sound not routing via external interface

Similar Messages

Maybe you are looking for