Browser thumbnails not wrapping or displaying properly

I was in the middle of cropping a just downloaded image and Aperture suddenly started to behave as if i was rapidly pressing random buttons very fast, screen was flickering and menus opening and closing. I had to restart my system to exit this. Now when i re-enter Aperture, all of my thumbnails in the Browser Only mode only display in one long line, with no scrolling options, and the other two View modes only give me a white screen!
Any ideas? This computer is only about a month old, and i have only installed my minimum software set from my last mac so far. I have never seen anything like this in the last 15 years.

I don't have a magical solution as to why this is happening unfortunately. I have the same machine as you, purchased around the same time and I haven't had any issues with Aperture so far.
The only thing that came to find is that you get 90 days of free tech support with Apple when you buy a new Mac so I was just thinking that it might be worth the time to call them and see where you get to. I suspect that your mileage may vary but if you let them know that your Aperture was working fine on your old box but isn't on this box then you could easily make an argument for this support call being related to your new computer. Anyway, can't hurt.
From http://www.apple.com/contact : 1-800-275-2273

Similar Messages

Very freaky, image in browser is not what's displayed

I was planning on doing a little organization in Aperture, and it seemed images
were out of place, as not in the right album.
Then clicking on image in browser to move it, discovered it's not the same displayed is really weird.
I quit the application before adding any from memory card that I was about to load in.
I'm at a loss as to what to perform w/o messing up the whole thing.
If more details are needed, feel free to inquire.
Thanks

Wow, now that link was hidden therapy. What a Nice Tour.
The menu's language at Aperture are so tech writer challenged, for me anyway.
If I ever get around to writing a third party program or scrip,
I'd love to create an add on to take every drop down menu item and
create a hovered cloud explanation as to what's going to happen if it's clicked.
At 50 something, it would make my day.
Maybe loading Aperture on a separate drive, and just slam through the gears to see
what happens vs doing burn outs on existing image files.
The built in manual I'm afraid is not reader friendly.
Thanks Much.
Phil

Clicking on the Back button in web browser does not take you back properly

When using Info View and drilling down through reports (using the InfoView Portal in the "View my documents" settings of User Preferences), if you have drilled down through several reports and then want to go back to the page you were viewing before you drilled down one more layer using the browsers BACK button takes you back a random number of pages - NOT back one page.
Is there a fix or workaround for this?
Thanks

>
Tim Simon wrote:
> Which type of report is this? A Crystal Report (not sure what your question means)
>
There are some big differences if using say a webi report.
I just tested on XIR2 SP4 and back forward worked fine with CR drilldown, using the sample reports.
Could be a report design issue or something wrong with your deployment, maybe even a browser setting (not sure as I don't work reporting issues too often).
You can wait to see if someone else has run into this or open a message with support to have an engineer take a look.
Regards,
Tim

Browser thumbnails not displaying correctly

I've noticed that in some of my projects, some of my photos show the wrong thumbnail. Instead they show a thumbnail from one of the other photos in the project.
If I make an adjustment to the photo, then the thumbnail updates. But after a while it returns to its old incorrect state.
However the problem is with large projects I can't tell which images are displaying the correct thumbnails, so it appears as if some images are missing (or repeated).
Is anyone else experienceing this?

Yes i have the same problem.
I imported some pictures from my memory card and started stacking while the previes was created.
Currently i have pictures in the stack showing images from other stacks in the thumbnail view. When the image is selected the right image shows up in the viewer.
Any solutions ?

Web pages not displaying properly

I just recently acquired 2 iMac G3' for my kids. The main issue I have right now is that the webpages do not seem to display properly. The current browser is Explorer 5.1 I believe, and I realize that this is not even being supported anymore. Can I make web pages display correctly without having to update to OS X, or would that be the recommended path since it uses SAFARI as the browser. I also intend to add an additional 512M of SDRAM.

I refurbish a lot of iMacs and used to use OS 9 on my Beige G3.
I had to move to OS 10.3.9 and 10.4.9 just because of the problem you are talking about. I also found IE 5 to be a pain.
I now use FireFox and it works fine.
First do the FirmWare upgrade while you're still in OS 9:
http://docs.info.apple.com/article.html?artnum=86117
Yes moving to 512 MBs of memory is a very good idea.
I have 2 iMacs for my 7 & 8 year olds (pink for my daughter) both running 10.3.9, ~ 512 MB memory and 20 GB hds.
They've been running for 2 years no problem. One with Maple Story which only runs on a PC so I have a P IV Vaio running XP Pro. Have had to reinstall the OS once already in 1 month and just now he's asking for me to look at it again.
Richard

Characters not displaying properly

I can't find how to properly enter and display certain chars from my db to my jsp page.
For instace, the word "Li'l" is displaying as "Li�??�?��??l".
things like TM,R arent working either.
the "'"(apostrophe) is entering into the DB without a problem- but it wont display. The (TM) is not storing or display properly.
Is there anyway to copy text directly from wordpad into a textbox and have it store in mysql and display in jsp correctly?
Also, this might be a question for the mysql section:
If i'm doing a query like thisSELECT ID, brandName, productInformation, productName, productImage FROM blahblah.uk WHERE brandName = '" + brand + "'"; and " brand + has an apostrophe- the query screws up. Is there a way around it at all?
here is my entire DB connection code.
<%
Class.forName("org.gjt.mm.mysql.Driver");
conn = "jdbc:mysql://" + host + "/" + db + "?user=" + user + "&password=" + pass;
Connection Conn = DriverManager.getConnection(conn);
Statement SQLStatement = Conn.createStatement();
String Query = "SELECT ID, brandName, productInformation, productName, productImage FROM blahblah.uk WHERE brandName = '" + brand + "'";
ResultSet SQLResult = SQLStatement.executeQuery(Query);
%>
<%
          while(SQLResult.next())
                 x_ID = SQLResult.getString("ID");
                x_brandName = SQLResult.getString("brandName");
                x_productName = SQLResult.getString("productName");
                x_productInformation = SQLResult.getString("productInformation");
                x_productImage = SQLResult.getString("productImage");
                thanks

May I assume since you're using ASP that you're on Windows? The only way I'm aware to be able to display Arabic characters on Windows would be to set your Windows language to Arabic. This will be somewhere in the Control Panel, but without knowing what version of Windows you're on, it's hard to be more specific.
In general, SQL*Plus is not a wonderful tool for viewing non-English data.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Browser is not reading style sheets to website, works in all other browsers

I created my site using templates in Dreamweaver. The new 4.0.1 Firefox browser does not render the site properly. The nav bar is split and all of the content is missing. It rendered correctly in 3.__.17 as well as current Safari and Chrome browsers on both PC and Mac

The home page looks fine to me.
On several pages, there is a problem with the table width: "1012px%"
Obviously you don't want both 1012 pixels and more than 100 percent...

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

Why is my youtube webpage not displaying properly?

My youtube webpage is not displaying properly. its like tthere is only text and thumbnails and the whle webpage is too damn long. The videos don't play when clicked. Problem on both firefox and chrome. I disabled kaspersky av but it didnt make any difference cuz i thought the firewall mustve been blocking something. check screenshot attached.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My vertical Spry is not displaying properly in IE 8

I am working on my first website using Dreamweaver CS4 and my spry is not displaying properly over my flash photo gallery. It looks ok in Firefox (although the borders are missing on my submenu for "sheds tool list") but in IE 8 the submenus can't be seen. How can I correct this?
My website is www.toolshedstudio.com
Here's my css:
@charset "UTF-8";
/* SpryMenuBarVertical.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, a fixed width box with no margin or padding */
ul.MenuBarVertical
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: 10em;
    border-top-style: none;
    border-right-style: none;
    border-bottom-style: none;
    border-left-style: none;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are same fixed width as parent */
ul.MenuBarVertical li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 170px;
    border-top-style: outset;
    border-right-style: outset;
    border-bottom-style: outset;
    border-left-style: outset;
    border-top-width: thin;
    border-right-width: thin;
    border-bottom-width: thin;
    border-left-width: thin;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarVertical ul
    margin: -5% 0 0 95%;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: absolute;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    left: -1000em;
    top: 0;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarVertical ul.MenuBarSubmenuVisible
    left: 0;
/* Menu item containers are same fixed width as parent */
ul.MenuBarVertical ul li
    width: 8.2em;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Outermost menu container has borders on all sides */
ul.MenuBarVertical
    border: 1px none #CCC;
/* Submenu containers have borders on all sides */
ul.MenuBarVertical ul
    border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarVertical a
    display: block;
    cursor: pointer;
    background-color: #000;
    padding: 0.5em 0.75em;
    color: #CCC;
    text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
    background-color: #33C;
    color: #000;
    font-size: 100%;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarVertical a.MenuBarItemHover, ul.MenuBarVertical a.MenuBarItemSubmenuHover, ul.MenuBarVertical a.MenuBarSubmenuVisible
    background-color: #33C;
    color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarVertical iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarVertical li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;

Hi
You flash movie doesn't have the parameter wmode=transparent. If you set that, the menu bar will be on top.
<param name="wmode" value="transparent">
I hope this helps.
Ben

Browser is not working properly

default browser is not working properly .....
closed on few second !!!!!!!
what the solution?

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Page will not display properly with inline Frames

I have a html page that will not display properly in Dreamweaver. I have a basic understanding of html and want to be able to edit a website in Dreamweaver that was given to me. It looks fine in a browser, but in Dreamweaver some of the content is missing and displays the following message, "Your browser does not support inline frames or is currently configured not to display inline Frames". I was able to open it without any problems using Microsoft Front Page, so is it possible to view and edit it in Dreamweaver?

Without seeing your page, I'm guessing that your page contains server-side includes, iframes and scripts to other files on the server that populate page with content on the server's end. You can't see it in DW because you don't have all the files in your DW local site folder. You said this views fine in FP. Was your page created in FP with FP proprietary tools?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Flash site not displaying properly in IE and chrome

Any ideas of what is causing this code not to display properly in IE and chrome as checked on PC.
It works on safari
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
          <head>
                    <title>n u h n | painting</title>
                    <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
                    <script type="text/javascript" src="swfobject.js"></script>
                    <script type="text/javascript">
                              swfobject.registerObject("myFlashContent", "8.0.0");
                    </script>
          <style type="text/css">

</style>
<body>
                    <div align="center">
                              <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="100%" height="100%" id="myFlashContent" align="middle">
                                        <param name="movie" value="index.swf" />
                                        <param name="quality" value="best" />
                                        <param name="scale" value="noscale" />
                                        <param name="bgcolor" value="ffffff" />
                                        
                                        <object type="application/x-shockwave-flash" data="index.swf" width="100%" height="100%" align="middle">
                                                  <param name="quality" value="best" />
                                                  <param name="scale" value="noscale" />
                                                  <param name="bgcolor" value="ffffff" />
                                        
                                                  <a href="http://www.adobe.com/go/getflashplayer">
                                                            <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" height="600" />
                                                  </a>
                                        
                                        </object>
                                        
                      </object>
                    </div>
          </body>
</html>

You can set an explicit width and height instead of a percent but I presume you want the flash object to be the size of the browser window specifying 100%. You also have noscale specified so I presume you're detecting the flash stage size and are dynamically laying out your content based on available space. Is that correct?
That said, you're using XHTML strict but you have some invalid code. In browsers like IE that can be enough to pop compatibility mode and it gets messy. For instance the "align" attribute is not supported so you should remove it.
Using 100% of the space is tricky. You have a scrollbar that can be invoked if you use 100%. Try 99% so the browser doesn't fire off a scrollbar just incase.
Your CSS probably isn't doing enough either. Use your web developer tools in your browser to take a look at your object. You're only clearing margins on the body tag. Try something more aggressive to remove ALL margins and padding like so:
*,html,body,object,div { margins:0; padding:0; }
Your object probably has some margins or padding pushing it off screen and you're only setting margins for the body tag itself. Also a small CSS note. Anytime you specify a value of 0 you don't need to specify px, like 0px. No matter your unit, em, px, etc, 0 is 0. That's why I didn't put 0px if you were wondering.
Also I specified 'div' in the CSS above. It may solve some of your problems to put your <object> inside a <div>.
e.g.:
<div style="width:99%; height:99%;">
    <object ............>
    </object>
</div>
Keep the <object> at 100% width and height if you place it inside that <div>. The browser is very good at dealing with <div>s and should have no problem keeping your content inside it resizing properly.

Servlet output not displayed properly in Internet Explorer

Hi All,
I'm developing a servlet which uploads a file. After the servlet parses the request body, it stores the file contents as a binary string in the database. While displaying the contents of the attached file, the IE(Internet Explorer) is ignoring all the newlines and spaces. IThe same uploaded file when viewed through Firefox browser is being displayed properly. I've added some debug statements to print the filecontent before sending it to servlet output stream. They look exactly as they were in the uploaded file. The MIME type is application/octet-stream.
I've also made the response to accept "ISO-8859-1" and "UTF-8" charsets, yet the IE is not rendering the file contents properly. The code looks like this,
response.setContentType("text/html; charset= ISO-8859-1, UTF-8");
byte[] buff = attachment.getAttachObject();
OutputStream out = response.getOutputStream();
out.write(buff);
out.close();
I've tried using PrintWriter also. I've tried changing the content types, character encodings of request and response objects, still couldn't resolve the issue. What really baffles me is that when it's displaying properly in Firefox, why can't it render properly in IE? I'm using Win XP SP2, and IE version is 6.0.29. The content which is being sent to the output stream contains newline and space characters, but they are not displayed in the browser. Did any one face this sort of issue? Your help is highly appreciated.
Thanks,
Tarun.

Hi,
Thanks for looking into the issue. Let me tell you that I've tried keeping various content-types like text/plain, text/xml etc, but in none of those cases the IE rendered the output properly. But with the same content-type i.e text/html or text/plain, Firefox is able to render the file content properly. I've tried a brutal force approach like below,
response.setContentType("text/plain");
PrintWriter out = response.getWriter();
String str = new String(attachment.getAttachObject());
char[] buff = str.toCharArray();
for(i=0;i< buff.length; i++)
int n = (int)buff;
if(n == 10)
out.println();
else
out.print(buff[i]);
out.close();
I was trying to print a newline whenever I find a newline character in the file content. Even this didn't work. Please suggest me some way to get rid of this problem.

Design View not displaying properly

I am pretty new to Dreamweaver. I can't get my Design view to display properly, even when tried on two different computers. The top div displays properly, then on the nav bar, only the background shows with the table items just listed in a row. There are a lot of black background segments to the page, and thin yellow lines. The main content shows at the bottom after a big chunk of black background blocks. The page shows perfectly fine in a browser. I can only work in Code view because of this. Any suggestions?
If it helps, here is my html:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>dentonquiltguild</title>
<link href="includes/gallery.css" rel="stylesheet" type="text/css" />
<link href="dqgfinal_styles.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">

<style type="text/css">
</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
<div id="top">
<div id="logotemp"><img src="images/logo.gif" width="280" height="175" alt="logo" /></div>
<div id="quilt_top"><img src="images/quilt_top_01.png" width="550" height="209" alt="quilt top" /></div>
</div>
<div id="navbar">
   <ul id="MenuBar2" class="MenuBarHorizontal">
     <li><a href="index.html"><a href="index.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image8','','images/homered_03.gif',1)"><img src="images/homewhite_03.gif" alt="home button" name="Image8" width="101" height="43" border="0" id="Image8" /></a> </li>
     <li><a href="general.html" class="MenuBarItemSubmenu"></a><a href="general.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image9','','images/generalred_03.gif',1)"><img src="images/generalwhite_03.gif" alt="general button" name="Image9" width="101" height="43" border="0" id="Image9" /></a>
       <ul>
         <li><a href="meetings.html">Meetings</a></li>
         <li><a href="showandtell.html">Show & Tell</a></li>
         <li><a href="library.html">Library</a></li>
         <li><a href="blogs.html">Blogs</a></li>
    <li><a href="retreat.html">Retreat</a></li>
       </ul>
     </li>
     <li><a class="MenuBarItemSubmenu" href="members.html"></a><a href="members.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image10','','images/membersred_03.gif',1)"><img src="images/memberswhite_03.gif" alt="members button" name="Image10" width="101" height="43" border="0" id="Image10" /></a>
     </li>
     <li><a href="community.html" class="MenuBarItemSubmenu"></a><a href="community.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image11','','images/communityred.gif',1)"><img src="images/communitywhite_03.gif" alt="community button" name="Image11" width="101" height="43" border="0" id="Image11" /></a>
       <ul>
         <li><a href="kidskwilts.html">Kids Kwilts</a></li>
         <li><a href="storybooks.html">Storybooks</a></li>
         <li><a href="sowinghope.html">Sowing Hope</a></li>
       </ul>
     </li>
     <li><a href="contacts.html" class="MenuBarItemSubmenu"></a><a href="contacts.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image12','','images/contactsred_03.gif',1)"><img src="images/contactswhite_03.gif" alt="contacts button" name="Image12" width="101" height="43" border="0" id="Image12" /></a>
       <ul>
         <li><a href="board.html">Board</a></li>
         <li><a href="bees.html">Bees</a></li>
         <li><a href="resources.html">Resources</a></li>
         <li><a href="shops.html">Shops</a></li>
         <li><a href="guilds.html">Guilds</a></li>
       </ul>
     </li>
   </ul>
</div>
<div id="quilt_bottom"><img src="images/quilt_bottom_02.png" width="550" height="128" alt="quilt bottom" /></div>
<div id="maintemp">
<div id="next">
<div id="next_meeting_text">
    <div align="center">Next Meeting<br/> March 15
      </div>
</div>
<div>
    <div align="center"><a href="http://americanjane.com" id="speaker_text">Sandy Klop<br/>"American Jane"</a></div>
</div>
<div id="calendar_button">
    <div align="center"><a href="calendar.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image6','','images/calendar_ro_03.gif',1)"><img src="images/calendar_03.gif" alt="calendar button" name="Image6" width="136" height="54" border="0" id="Image6" /></a></div>
</div>
<div id="events_button">
    <div align="center"><a href="events.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image7','','images/events_ro_03.gif',1)"><img src="images/events_03.gif" alt="events button" name="Image7" width="136" height="54" border="0" id="Image7" /></a></div>
    </div>
</div>
<div id="main_head">Welcome To The <br/>Denton Quilt Guild</div>
<div id="main_text">
      We are a group of over 200 quilters creating everything from traditional quilts, to art quilts, and everything in between. New members and visitors are always welcome to our meetings on the 3rd Thursday of each month.<br />
      The Denton Quilt Guild provides a service to the local community by providing quilts to children in need, offering our Storybooks and Quilts To Go to our local schools, and participating in local events such as the Storytelling Festival. Quilters of all levels are welcome!
      </div>
    <div id="bottom">
    <div id="copyright"><img src="images/copyright.gif" width="127" height="8" alt="copyright" /></div>
    <div id="facebook"><a href="http://www.facebook.com/groups/42514709926/"><img src="images/facebook.gif" width="112" height="45" alt="facebook" /></a></div>
</div>
</div>
</div>
</div>
<script type="text/javascript">
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

I still cannot solve this problem. Can ANYONE out there help, or tell me where I can find the answer. Now I will attach two screen shots of what my Design View looks like. It happens on all pages I have created. I do like working in code view, but there are times when it's easier, almost essential for me to work in Design view. If it works for some people, why not me?
These images are the top and then the bottom of the same page. I have turned CSS rendering on and off, but nothing helps.

Browser thumbnails not wrapping or displaying properly

Similar Messages

Maybe you are looking for