Browser won't print website graphics - only text

Does anyone know how to print up web pages so that the graphics on that page will show up and not just the text? I have tried printing with both Firefox and Safari and both refuse to print the graphics. I have a new Epson Color Printer.
Any advice, suggestions would be great.
Thanks.
Patrice

Neither Firefox or Safari have a setting that stops the images on a site from being printed. Therefore there must be a setting with your printer driver that is causing the incorrect output.
As a test, choose to print but from the print dialog, select PDF and save the file. If this PDF has the images, then you know its something to do with the Epson driver.
PaHu
Sorry BD. Looks like we replied at the same time. At least we had the same idea..
Message was edited by: PAHU

Similar Messages

Itunes doesn't display graphics, only text, has anyone seen this?

Just loaded iTunes 10.5 on Windows...only TEXT is displayed...has anyone seen this?

I have this exact problem, and it occurs on every device I own: iMac, Macbook, iPad, Win 7. The explanation for the issue is that the stylesheet isn't coming over (.CSS).
Because it occurs on every device in my house, I'm assuming there's something in my wireless router configuration that's causing it. I haven't found the issue yet, but I'm digging through my modem configuration to see.
go to either http://192.168.0.1 or http://192.168.1.1
That's your modem's IP address. If you can figure out what's in the configuration that's causing it, please post back.

Won't display graphics, only text

need some help here. safari will only display text no graphics? i cleared the cache, that didn't help. i emptied cookies, that didn't help. i reset safari, that didn't help. all the trouble started after i upgraded to 10.4.5 any help would be great. it doesn't matter what webpage i view it's all the same.
Al Powerbook & iBook G3 500

yuri2k,
Welcome to Apple Discussions.
Since you are new to Discussions you are not aware that you are according to the "Terms of Use," Threadjacking:
Threadjack-To wrongly post a dissimilar issue in an existing discussion, distracting from the true focus of the discussion. If your issue has any significant difference from a similar topic, then you're probably better off posting a new topic to focus attention on your particular issue.
I would not personally use "wrongly," but your question will get the response it deserves without detracting from the original posters question, if you start your own thread.
In this case, I do not know the answer, and since another user on the same network appears to not to have the problem, I suspect that it may be related to "Proxie setting."
Good Luck
;~)

All websites display only text and images, but on a white background (no design graphics)

Only the bodies of websites display. None of the headers, footers, menu bars, etc. show. All is white. I reinstalled Firefox with same result. IE displays correctly. I have a new Dell Studio XPS with Windows 7.

See:
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Adobe Reader 9.0 views but won't print a graphic that prints in version 7.0

I have several pdf files that were created from Adobe InDesign. The files contain a photo that has text and another graphic layered on top of the photo. When I export the InDesign file to Adobe PDF, I can see the entire image (photo, text, and graphic), but when I try to print the PDF from Adobe Reader 9.0, the graphic image does not print. When I try to print the same pdf file from a computer that has Adobe Reader 7.0 installed, the file prints fine. Is there anything I can do to fix this problem? If not, is there any way I can get Adove Reader 7.0 reinstalled (I can't find it on the website). Thanks.

Try and print the PDF as an image.
Also when you send this to someone else are hey able to print without an issue?
Have you've tried another printer?

D7360 won't print in "Black Only", unless color cartridges are also non-empty

I'm trying to print a document in grayscale mode using D7360 Photosmart printer.
In the printing setup dialog am explicitly checking the option to use "Black Print Cartridge Only".
The printer refuses to print, saying:
"The following ink cartridges are empty: Light Cyan. Replace these ink cartridges to resume printing."
"The printer does not have enough ink to ensure printer's health. The empty ink cartridges must be replaced to resume."
Does this mean that even though it is not using the color cartridges, all of them have to be non-empty when the printer is operating?
This question was solved.
View Solution.

I think I solved the problem for my PC. I put in a new black cartridge but my color cartridge is empty. My printouts started looking awful and were trying to print in blue. I went to the printer area of the control panel and requested grey scale only. Suddenly my printouts look great, as they did before. I'm running Vista on a Compaq with an HP deskjet D1560 printer.

HP Office Jet 6500 Printer won't print black ink only since FF 3.6 upgrade

I cannot print in "Black Ink" on HP PRINTER Office Jet 6500 E709 THIS ONLY OCCURS WHEN PRINTING WEB PAGES. All WEB pages Print in "Color" even when black (greyscale is only ink checked w/in HP Printer
* Web forum fix - At HP Print Section click "Premium Paper" setting .... However, this does not work
Have clicked on FF 3.6 version to download in the past 3X however system says I have FF3.5

Are you changing that setting to Black / Greyscale from within Firefox?
{Ctrl + P} then hit the Properties button next to the Printer Name.

Mavericks won't print to Xerox Phaser 6300.

Mavericks has my printer in the list of available devices, but tells me that the printer is not connected and won't print. Xerox only has updates to Mountain Line in their driver downloads.
Anyone else having a similar problem?

Update:
Checked the printer Settings to confirm the Printer's address. When I use the Setting to check the Wi-Fi Settings, I get a message saying "This computer appears to have a working Internet connection, but can't find Phaser 6300DN (00L00:aa:95:47:31).printer._tcp.local. You may have typed the address incorrectly.
The address is 00:00:aa:95:47:31 so I don't know where all the parenthetical data is coming from.
The network setting seems to be at the heart of the issue, but I'm not sure how to resolve them.

HP LaserJet Pro 400 MFP M425dn won't print text at 72 point size or larger

My workplace recently purchased an HP LaserJet Pro 400 MFP M425dn all-in-one printer. It works excellently with the exception of the fact that it won't print text that's 72 points or larger in size. I've tried numerous fonts that're pre-installed with Windows, and all of them print properly at point size 71.5 or smaller; anything else simply doesn't show up in prints. The content that's sized at 72 points or higher *does* affect the flow of other printed content on the page, however. It's like the 72-point or larger text is occupying space, but it's completely invisible on the printed page. I've tested this using Microsoft Word 2002 on three separate computers, two of which have Windows 7 installed and one of which has Windows Vista installed. The problem is identical on all three computers. The printer is connected via ethernet cable to our wired network. I've installed the included printer software, and I don't believe that there are any updates to it that weren't installed up to this point. Any thoughts on how to resolve this issue?

hello, i only made an account to solve this for you guys because it has been a headache for me also.... let me apologize before hand for terrible grammar and punctuation i am in a huge hurry Now this may not work for everybody but i fixed it on my machine with the following now before you print ...use (ctrl+p) in your word processor to open the print window click on (properties) then navigate to the (advanced) tab now, I have a section called printer features under this category there is an option to "send truetype as bitmap" enable this and see if it can help any of you, for me, with this ENABLED I can print any size font my word processor will allow me to type specs of my machinedell d6420win7msoft word 2007 printer itself is hp laserjet 200 color m276 printer driver is HP LaserJet 200 color MFP M276 PCL 6 i understand that this printer and driver is not identical to yours per se but the nature of these drivers makes it highly likely that this solution will work for most of you if this helps, have somebody else post it more noticeably because i will probly not be signing back in to this website i created this account just to post this and hopefully solve this annoying issue for many of you ...no kudos needed

Snow Leopard won't print graphics in Word 2008

When I updated to Snow Leopard and Office 2008, everything seemed to work perfectly, open, and run well. However, my .doc files previously created in Office X that include graphics from the draw program will print ONLY text and text boxes--no graphics. I get the same in compatibility mode (.doc), when I "save as" to DocX format, and when I try to save as a PDF--text floating in a sea of non-graphic white. I sent the file to my husband's computer running Leopard, and it prints perfectly. Similarly, if I open Word 2008 and create a fresh, native docx file with graphics, those graphics DO print. So this seems to be a Snow Leopard problem with compatibility Word files using graphic elements (nothing fancy--just flow chart stuff.) Any ideas anyone? I am a small educational publisher and do NOT relish the thought of redoing a boatload of work in another program. Help!

As near as I can tell, the printer is not the problem. I have tried three different printers, all with the most up-to-date drivers, and even tried Adobe Acrobat 9 Pro, which should bypass all of the above. The graphic elements that worked perfectly in my previous system simply disappear in Snow Leopard. My workaround is to send them to an "older" Mac NOT running Snow Leopard, then convert them to PDF files, then print from Snow Leopard, and all is well. Absolutely frosted! I have publishing deadlines to meet!

Printer won't print text documents

My HP 4300 series all in one printer prints images but won't print text from word processor documents. If I print a test page it will only print the image part but none of the text will appear. Blank pages are printed when I attempt to print text from a word processor however images are printed perfectly from web pages etc. Any help would be greatly appreciated so that I can have full functionality of my printer again.

Hello
See if the link will help you with the printing issues.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00613428&cc=uk&lc=en&dlc=en&product=1138342&tmp...
Thanks
Laura
Although I am an HP employee, I am speaking for myself and not for HP.

Adobe reader shows text but won't print all the text

I have a form used by many and it works with no problem. Today one came in you could see all the text, but when printed, only some of the text appeared.
I checked it on 3 machines, also one that has Acrobat 9 on it, same results.
On the print setup, under comments and forms, I have Documents and Markup set, but if I click on "form field only" I do get the missing text.
As said we have gotten many forms from other people, no problems, so it really not for lack of knowing how to print it correctly.
The only print preview I can see I have is when I go to print it, it appears on the right, and it is missing the text there.
I have removed all name and address from the form for privacy reason, I did add my name in a few blocks and then saved it but it won't print that also.
for some reason only the top row under CPR AED and SFA print, but as you can see, there are a bunch that don't, along with all the names I removed.
Thanks in advance.
John
Any ideas?
Tuesday--still working on this, I activited the voice part of my acrobat 9 and it reads all the text while in PDF form, just won't print it.
John

Restarted computer and seems to be working again.

Printing only text within Forte app

Hi,
I have a simple (but insuperable for me) problem.
How is it possible to print in text mode from a Forte application (3.0.M)?
I need use the text only printers driver in Win OS, but reading the help of
PrintDocument class, it seems only possible to print in graphic mode.
Someone can help me?
Thanks
Alberto Zanoli

Alberto,
I may have misunderstood your note, but ...
If you're interested in printing an arbitrary TextData object (rather than
a window), try the attached method. I seem to recall that it was actually
tested at one point under Windows NT with a Generic/TextOnly printer, but
we're not at this point set up to repeat the test.
For whatever it's worth, though, here it is.
Tom Wyant
E. I. DuPont de Nemours and Company.
(See attached file: PrintText.txt)

Since updating to 10.6.8 my Canon LBP3100B printer is only printing lines and no text??

Hi there
I hope someone is able to help me. I recently did a Software update to 10.6.8 and my Canon printer LBP3100B is now only printing lines & pictures (no text)
I had a look on Canon's website and their newest driver is for 10.7 but i'm only on 10.6.8??
Not sure what to do or if anyone else has had this problem.
Why can't companies make their products more compatible with Macs? Sigh...

deibu wrote:
I have exactly the same problem since last weeks's 10.6.8 update, but with a Canon ip4500 printer.
Unfortunately, the v3.31 CAPT driver mentioned above is not for 10.6.8 or my printer, but thanks for trying Pahu.
The CAPT v3.31 driver does work on 10.6.8 but the driver is for certain laser models of Canon printers and All In Ones, such as the LBP3100B that the OP has. I never said it was for the inkjets so I'm not sure how you thought that I did.
deibu wrote:
There doesn't seem to be any sign yet of Canon updating their 10.6.8 drivers, and the latest Apple update today didn't help either, although it apparently included a bug fix for other printer problems.
The 10.6.7 and subsequent 10.6.8 updates did not introduce the 'no text printing' issue that the Canon laser devices experienced. If the iP4500 is not printing text then it may have simply run out of black ink. And note that this model has two black tanks. The PGI-5Bk which is for printing text and the CLI-8Bk which is used for photos. So run a nozzle test to see if all the colours are printing correctly.
If both black tanks are working fine then try removing the printer from Print & Fax and adding it again. This can often help when printers stop working. Also, restarting the printer itself can often help resolve non printing issues.

PDF File Won't print text, just watermark and image

Hello,
I have created a fillable/saveable PDF. I have one client who states that when he attempts to print it, it only prints the watermark and our logo in the upper right corner. He says that it won't save either. He has made an attempt at two different computers. There is a similar PDF we created that he can print and save properly. So far it's just the one we are having trouble with.
When we check it on our end, it works fine. We can save and print it fine. I have asked what browser he is using and await a reply.
Any ideas on a setting on his computer, browser or Adobe Reader I can have him check?
Many thanks!,
Dave

As far as the printing, he likely does not have document and markup selected. The document is the original PDF and the markup would be form fields and such.
As for saving, if he is using Reader he will not be able to save unless you have activated Reader Rights. There are license restrictions on using the activation you should read before you go on your merry way, generally restricting the number of uses (500) of the form for data collection in that case.

Browser won't print website graphics - only text

Similar Messages

Maybe you are looking for