Browser zoom causes typing lag

When using Outlook.com mail, my user noticed a typing lag. I reset IE, disabled all startup items, tried an external keyboard on this laptop, deleted the built in keyboard driver and let it redetect on reboot, tried Google Chrome as an alternate browser.
No typing lag in any other app such as WordPad. I found that in IE or Chrome, 125% zoom was fine but as soon as I set it to 150%, the lag came back, that was the common denominator.

Hi,
This issue can be caused by video card and GPU acceleration.
Please disable GPU acceleration in IE and Chrome, and if you have Graphic card software, please also disable the GPU acceleration on it to check the results.
How to enable or disable software rendering in Internet Explorer 9
http://support.microsoft.com/kb/2528233
Note: If your IE is not version 9, only try the manual steps in about article.
Windows 7: Chrome GPU Hardware Acceleration - Turn On or Off
http://www.sevenforums.com/tutorials/271264-chrome-gpu-hardware-acceleration-turn-off.html
Also, update the driver for the graphic/video card driver to see what's going on.
Kate Li
TechNet Community Support

Similar Messages

Safari address bar typing lag / freeze

I get a lag when typing in the Safari address bar since upgrading from Mavericks to Yosemite on my Macbook Pro 2013 Retina.
I type 4 characters and it just freezes for a few seconds before catching up. This only happens in the Safari address bar, no other place in Safari and no other application on my computer.
I deleted the cache, history, cookies, web data, etc.
I reset the SMC and PRAM.
I turned off all Smart Search Field helpers and Include Search Engine Suggestions in Safari Preferences.
This fixed it for a day or so, then it returned.
Nothing works.
I assume it is searching through some type of cache to offer suggestions for the address bar and this is causing the lag.
Suggestions welcome.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' 'L*/{Con*/*/Data/L*/,}Pref* -type f -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Even Typing lag? Please save my Macbook!

Efficiency matters. And the super slow Macbook Pro is dragging me down
Typing lag?
Chrome browsing lag?
not to mention Photoshop, After Effects and Xcode.
(i don't dare opening MS Word, toooo slow)
I tried MacBooster and it didn't really help.
Usually I just open these softwares: Chrome, Evernote, EUdict, Flux
But even this setting could lag from time to time. (Already the minimum amount of app I could open)
What is the problem? What can I do? Should I upgrade my hardware?
EtreCheck version: 2.1.8 (121)
Report generated 2015年2月6日上午9:38:47 [GMT+8]
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,1
    1 2.3 GHz Intel Core i7 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 282
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1440 x 900
    NVIDIA GeForce GT 650M - VRAM: 512 MB
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 6 days 20:4:59
Disk Information: ℹ️
    APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (212.60 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    HL-DT-ST DVDRW GS31N
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    com.karios.driver.DuetDisplay (1 - SDK 10.10) [Click for support]
        /System/Library/Extensions
    [loaded]    com.Cycling74.driver.iSkysoftAudioDevice (1.5.2) [Click for support]
    [not loaded]    com.Perfect.Driver.SystemAudioRecorder (1.0.0 - SDK 10.6) [Click for support]
    [not loaded]    com.wacom.kext.pentablet (5.2.4) [Click for support]
Problem System Launch Agents: ℹ️
    [killed]    com.apple.AirPlayUIAgent.plist
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.cmfsyncagent.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.EscrowSecurityAlert.plist
    [killed]    com.apple.lookupd.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.recentsd.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.security.cloudkeychainproxy.plist
    [killed]    com.apple.spindump_agent.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.xpc.loginitemregisterd.plist
    15 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.spindump.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    com.apple.xpc.smd.plist
    13 processes killed due to memory pressure
Launch Agents: ℹ️
    [unknown]    all-wcprops [Click for support]
    [unknown]    entries [Click for support]
    [running]    com.qvod.agent.plist.svn-base [Click for support]
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.iSkysoft.Audio_Recorder.Agent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.qvod.agent.plist [Click for support]
    [running]    com.wacom.pentablet.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.alipay.DispatcherService.plist [Click for support]
    [running]    com.iobit.AMCDaemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.teamviewer.Helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.alipay.refresher.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.iobit.MacBoosterMini.plist [Click for support]
    [loaded]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    duet    應用程式 (/Applications/duet.app)
    Flux    應用程式 (/Applications/Flux.app)
    iTunesHelper    應用程式 (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Android File Transfer Agent    應用程式 (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    Alfred 2    UNKNOWN (missing value)
    百度云同步盘    UNKNOWN (missing value)
    Alfred 2    應用程式 (/Applications/Alfred 2.app)
    SpeechSynthesisServer    應用程式 (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Internet Plug-ins: ℹ️
    WacomNetscape: Version: 1.1.1-1 [Click for support]
    QvodPlayerPlugin: Version: 1.0 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    WacomSafari: Version: 1.1.1-1 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.2.5 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Click for support]
    QvodBrowserPlugin: Version: 1.0 - SDK 10.8 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 05 Check version
User internet Plug-ins: ℹ️
    aThunderPlugIn: Version: Unknown
    WangwangPlugin: Version: 1.3 - SDK 10.8 [Click for support]
    npalicdo: Version: 1.0 - SDK 10.6 [Click for support]
    aliedit: Version: 2.1.0.0 - SDK 10.7 [Click for support]
Safari Extensions: ℹ️
    QvodExtension
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    SwitchResX [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         4%    WindowServer
         4%    Google Chrome
         0%    LightPeek_en
         0%    LightPeek_de
         0%    AlipayDispatcherService
Top Processes by Memory: ℹ️
    176 MB    Google Chrome
    173 MB    Google Chrome Helper
    69 MB    WindowServer
    56 MB    Evernote
    47 MB    Finder
Virtual Memory Information: ℹ️
    63 MB    Free RAM
    1.09 GB    Active RAM
    1.03 GB    Inactive RAM
    1.02 GB    Wired RAM
    128.38 GB    Page-ins
    1.44 GB    Page-outs
Diagnostics Information: ℹ️
    Feb 5, 2015, 08:35:50 PM    /Library/Logs/DiagnosticReports/Pushbullet_2015-02-05-203550_[redacted].hang
    Feb 5, 2015, 05:03:30 PM    /Library/Logs/DiagnosticReports/SafariDAVClient_2015-02-05-170330_[redacted].cp u_resource.diag [Click for details]
    Feb 5, 2015, 03:31:02 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Evernote_2015-02-05-153102_[re dacted].crash
    Feb 5, 2015, 11:15:36 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Evernote_2015-02-05-111536_[re dacted].crash
    Feb 4, 2015, 03:27:21 PM    /Library/Logs/DiagnosticReports/AlipayDispatcherService_2015-02-04-152721_[reda cted].crash
    Feb 4, 2015, 07:52:11 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Eudic_2015-02-04-075211_[redac ted].crash
    Feb 4, 2015, 07:51:32 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Eudic_2015-02-04-075132_[redac ted].crash

Hi cecilialee,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like OS X is running slowly. I would recommend that you read this article, it may be able to help the issue.
OS X Yosemite: If your Mac runs slowly
Cheers,
Mario

CSS causes software lag in NetBeans

(I hope this is a right place to ask this question)
Hello everyone,
I'm working with NetBeans (i posted this question on their site, but yet to receive a reply and kind of need help) When I have CSS connected to the NetBean file it causes great lag when changing between views Code and Design. I mostly use Design view only for "Preview in Browser" option since project I'm working on is design heavy. Is there a way around this or some sort of solution for this?
help is very much appreciated, thanks everyone and have a great day.

The NB site is the correct place to ask this question. Just wait for a reply there. Thes forums are for Java language topics, not IDE support.

ADF Table with browser zoom not working properly

Hi All,
I am using ADF Table to show data from database. I am using JDeveloper 11.1.1.4.0.
When user uses browser zoom functions (i.e. Ctrl + or Ctrl -) for zoom in or zoom out, The UI of Table disturbed and columns are not in line.
Here is the snapshot of disturbed table image http://i.imgur.com/07YfB.jpg
I have tested it with Firefox and Internet Explorer and in both the cases if you zoom in the columns are not in line anymore.
I have added *<accessibility-profile>large-fonts</accessibility-profile> into trinidad-config.xml* and
tried but it gives me the same result.( Reference Oracle Docs http://docs.oracle.com/cd/E16162_01/web.1112/e16181/af_access.htm#BEIDFIIB )
Can anyone suggest solution for how to solve this problem so that the columns will be is line when uses browser's zoom?
Thanks in advance,
Viral

Hi,
I am not using any kind of css for table.
It is default skin and defalut table properties that ADF provides.
- Viral

IC Webclient. Typing Lag

How am I going to explain this?
Ok there we go. Our users are complaining about CRM performance in specific there are complaining about typing lag. They are typing faster than what shows in IC webclient fields.
I was wondering If any one has experienced this issue before, As I have exhausted all the performance enhancement opportunity with our system.
IC webclient version is as follow:
CRM 4.0
Database Client Library     SQL_Server_8.00
kernel release   = 640
compiled on      = NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compile time     = Oct 29 2006 19:35:01
patch number     = 155
source id        = 0.155

Calling Markus and all the gurus who have helped me in past.
I have upgraded the frontend PC's for more memory.
Database and CI has been tuned as per early watch report.
But still, typing lag is an issue. it takes few second to see what users are typing on the screen. Any suggestion?
Regards,
KG

Avoiding applet main window resizing when using browser zoom?

Hello, I haven a applet embedded into a jsp page into an APPLET tag, with a fixed height and width, same values as the JPanel has on the applet with all the elements inside of it, my problem is, that if I use the browser zoom, the JPanel respects width and height but JApplet window does not, and increases until I stop zooming the site, I'd like to avoid this, I already tried by setting these parameters on the init function on the JApplet class:
this.setSize(593, 468);
this.setMaximumSize(new Dimension(593,468));
this.setMinimumSize(new Dimension(593,468));
this.setBounds(0, 0, 593, 468);
this.setPreferredSize(new Dimension(593,468));
But it does not work, is there something like a this.setResizable(false) for the JApplet class? I understand that JApplet is a subclass of JFrame isn't? please, any idea would be highly appreciated, have a nice day!!

saman0suke wrote:
So far I have the layout as NULL,Java doesn't have a NULL. Presumably you have a null layout. Don't do that/ Learn how to use layout managers and maybe you won't have a problem with the container being resized.
db

Just installed iOS7 on iPhone 4. Huge typing lag problem now. Any fixes? Apple please fix asap.

I just installed iOS7 on my new iPhone 4. Huge typing lag problem now. Any fixes out there? How do I uninstall this update. The phone worked better without it. Don't even like the new layout and icon design.
Apple, please fix this now!!!

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

SSH shell typing lag when server's using wireless

I've just setup initial archlinux installation, started opensshd with default setting without modifying any configuration.
First I've enable netctl-auto to use wireless connection (11n 5Ghz) in archlinux, after that I've connected ssh shell using my 2 machines (1 wired, 1 wireless) and observed noticeable typing lags in remote shell regardless of connection client uses. As soon as I replace wireless network to wired one on archlinux those problem goes away completely.
Suspected basic thing such as network load, or latency but there weren't significant differences between wired / wireless, not sure why only occurs when server uses wireless connection.
May I possibly ask for some help to find out any clues?

@Trilby - Interesting, actually there are more than 10 devices are connected via wireless to my router but in my case I haven't experienced any other perf drops other than this issue.
@firecate53 - Thanks for suggestion. Before posting this I also tried Mosh with MobaXterm as client (client system is windows) which did not show any big differences. Cas of power saving I didn't thought in that way at all, will take a look.

Testing iMac in store I checked iPhoto editing. Photo said to be 42Mb but zooming caused immediate pixellation, so clearly was not displaying a 42Mb file. When I zoom in PS on PC a large file retains detail for a lot of zooming. Whats going on?

While testing a MacBook pro in the Apple Store, I checked iPhoto. Looking at what was said to be 42Mb file I noticed that zooming caused immediate pixellation, so clearly a 42Mb RAW file was not what I was looking at. In my PS Elements on my PC when I zoom, the photo remains unpixellated until quite a lot of zoom is used (marked as 100%). This depends on the file size of the photo of course. Maybe the displayed photo in iPhoto is a low res. jpeg. This is not too good for me. I wanted to see how the base model of MacBook would handle photos esp large files and I need to zoom in. Will the base model cope with this in PSE for Mac?

iPhoto will happily zoom to 300%. The quality at that magnification will depend on the quality of the image. But if it's a sharp image - of any size - it will zoom to 300% with no problems.
PSE for Mac has nothing to do with iPhoto. I have used it with no problems, but for best information why not ask over at the Adobe forums?

IE Browser zoom level problem (Avoid missing Left/Top portion)

When the user set the zoom level in Internet explorer to 125 or 150, there are some missing portions (left and top) of my flash object.
Is there any way to avoid this ??? or at least forcing the display of the Left and top side
For some reason I have lost almost all the day on this with no luck so far
Thanks

Many hours later and the only fix I can do is to "hack" the scaleX/Y to force zoom to 1:0 ...this way to content is not affected by the browser zoom level.
Any better solution to prevent my flash to be incomplete (left/top) when the user use the browser zoom feature??

I think that overflow: hidden; interferes with Browser Zooming

I had a related thread about converting a site from px to em. The link is at the bottom of this page.
Now I think I've had a reasonable outcome with my px to em conversion but there is a problem.
donfaulkner.co.uk
When you zoom in the browser beyond the limits of the screen some of the content gets cut off by the browser window. It's obvious when you scroll right after zooming.
I think that it must be to do with overflow:hidden.
At the bottom of the page is a row of thumbs that have a mouseover image swap. I removed overflow: hidden from that containter and the rollover stopped working and the space between the alternative navigation at the very bottom of the page closed up.
I would just like to know a bit more about what's going on and the relationship between overflow: hidden and browser zoom.
Thanks
Martin
http://forums.adobe.com/thread/572207?tstart=0

Try to rename the cert8.db file in the Firefox profile folder to cert8.db.old or delete the cert8.db file to remove intermediate certificates that Firefox has stored.
If that helped to solve the problem then you can remove the renamed cert8.db.old file.<br />
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previous intermediate certificates.<br />
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.

"feeds and updates" widget causing major lag since froyo

Hey guys,
Ive noticed that ever since I downloaded the Froyo OTA update last week, the "feeds and updates" widget is causing MAJOR lag issues. It takes several seconds to move from that screen that the widet is on, and trying to scroll through the widget is VERY slow and choppy. I have tried both the soft reset and the hard reset, without any improvement. If I remove the widget from the screen, my phone gets significantly faster, and the lag pretty much disappears, so Im pretty sure its that widget causing the problem. Has anyone else noticed this problem, and if so, is there any way to fix it? I like using that widget for my facebook updates, and want to keep it!

Kizersosei wrote:
I have a Samsung Galaxy S Fascinate and since the Froyo 2.2 OTA update last week, my phone turns into a brick as soon as I add my Facebook account to the Feeds and Updates widget. The screen locks up, I can not scroll the wall up and down, and scrolling the screens left and right takes forever; they freeze between screens and everything lags to the point where the phone becomes useless. I powered the phone down and up, took the battery out, no remedy. A hard reset on the phone will make the phone usable again, but as soon as I add Facebook back to the Feeds and Updates widget, the phone starts locking up again. Called Verizon and they reached out to Samsung who thought there was a glitch during the download of the 2.2 software, so Verizon sent me a replacement phone of the same make and model. As soon as I activated it, it told me Froyo 2.2 was ready to be downloaded to the phone for updating. Did that, everything was working fine UNTIL I added my Facebook account to the Feeds and Updates widget; the phone started lagging and locking up as the previous one did. I'm waiting to talk to Level 3 support with Samsung as I write this. Please note, if I reset the phone and don't add my Facebook account to the Feeds and Updates widget, the phone is usable. However, I did notice that in Vibrate Mode with text message and email notification, the vibration barely lasted a millisecond; I could not feel the vibrations in my pocket. In my opinion, this 2.2 update is flawed and needs re-working. I had no issues with this phone with the 2.1 software, and would prefer to go back to it if possible until 2.2 is fixed or another, non-buggy update is released for this phone.
If that is your wish for now, I see no problem in you going back to 2.1. Verizon support should be able to provide you with that os. Just be sure you don't then check for any new updates.

Want to use Avira Browser Safety, but Firefox blocks me. Ist that Avira Browser Safety causing problems then?

Want to use Avira Browser Safety, but Firefox blocks me.what kind of problems does Avira Browser Safety cause Firefox, for me to counterbalance chances and risks?

Can you describe what error message you're getting, in the Add-ons Manager or elsewhere? Or whatever else lead you to believe Firefox is blocking something.
I don't see anything related to Avira on the blocklist.
* https://addons.mozilla.org/en-US/firefox/blocked/
The only confirmed outstanding issue I can find is the following problem with page loading. Please do not post comments on bug reports unless you have technical details that would be relevant. See [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla etiquette] for details.
* [https://bugzilla.mozilla.org/show_bug.cgi?id=844714 Bug 844714] - Avira browser protection reportedly breaks incremental page loading

Creative X-Fi Titanium causes input lag in UT2004

Hi
I'm using Titanium with the latest official drivers on Vista Ultimate SP2 x64.
It causes input lag in UT2004 if hardware openal is enabled. Using integrated HDAudio instead of creative solves this problem. I've googled a little and found another posting about this issue:
http://forums.epicgames.com/showthread.php?p=28033554
it's about the same probleb, but in UT3.
Any advise would be appreciated. Gonna also try Daniel_K drivers later..

Hi,
haven't played UT2k4 for a long time. But i remember that there is an option in the Soundsettings called "use system installed" or something. With this checkbox you can choose between openal32.dll in the Gamefolder or openal32.dll in the windows/system32 folder. Try to change that option. That's what helped me back then.
And of course "Hardware+EAX" should be selcted.
Sorry for my german english
Perfi

Browser zoom causes typing lag

Similar Messages

Maybe you are looking for