BrowserLab 1.6.2 is live with new browser support

The team has released a new and improved version of BrowserLab this afternoon. Please read about it on the BrowserLab Team blog:
http://blogs.adobe.com/browserlab
http://blogs.adobe.com/browserlab/2011/07/28/browserlab-v1-6-2-with-firefox-5-and-chrome-1 3-support-is-now-live/
Enjoy!
Bruce
Bruce Bowman
BrowserLab product manager
twitter: @brucebowman

Hello Martin,
Our philospohy with BrowserLab has beento provide a resource that is always available, and quick and easy to use. It is also to provide a relevant selection of browsers, configured to reflect the most common installations.
We take the removal of older browsers seriously, and are careful to check browser usage statistics. Once we see that the usage of a browser has dropped to an insignificant level, we talk to a representative sample of BrowserLab users to check for sensitivity to removing that browser. We do this to make sure we aren't missing or forgetting about something important that would make us want to leave an older browser in BrowserLab. E.g., IE6 is 10 years old, but it is important to our users, so we have kept it in BrowserLab.
By removing older browsers, we're telling our users that we think they no longer need to worry about testing them for cross-browser compatibility.
There may be some unique situations for some of our users where they will need to test in an older browser, but they're the extreme minority. To keep BrowserLab fresh and relevant for our user base, and to keep it affordable to run, we will continue to remove older browsers once they're no longer significant.
We've announced that BrowserLab will remain complimentary through April 2012. We'll communicate pricing shortly before then.
Bruce

Similar Messages

Hello.With new browser I can't see saved old browser page

With new firefox 4.0 i can't open, with old version 3.6 saved pages. If I try to open saved site, browser 4.0 show wite page.
== This happened ==
Every time Firefox opened

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Since installing Firefox 4 I cannot install addons - help needed with new browser please

Have tried to install add-ons, and whilst they appear to have installed nothing is added to the tools add-ons button.

This can be caused if one of the files that stores details of installed extensions is corrupt.
# Open your profile folder, for details of how to find it see https://support.mozilla.com/kb/Profiles
# Close Firefox
# Delete the following files if they exist, extensions.cache, extensions.rdf, extensions.ini and extensions.sqlite
# Re-start Firefox, it will then rebuild the list on installed extensions

Does the new browser support norton and roboform auto password fill-ins?

can u use the norton and roboform automatic password fill-ins in the updated 8.01 firefox browser?

Norton is compatible with Firefox 8 if you have applied the current Norton updates.
#How to update Norton and
#things to check during Firefox 8 install are included in the following
#Norton 360 --> http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640
#NIS --> http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-8-Support-for-Norton-Toolbar/td-p/581516
#Also see --> https://support.mozilla.com/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox
Roboform is compatible with Firefox 8 if you have updated Roboform to at least version 7.6.2
#See --> https://addons.mozilla.org/en-US/firefox/blocked/i45
#Update to Roboform '''''<u>7.6.4</u>''''': http://www.roboform.com/support/news
#Roboform download link: http://www.roboform.com/platforms/browsers/firefox
#'''''Also see''''' --> https://support.mozilla.com/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Activate a Scenario after go-live in new gl

Hello All,
We went live with New GL a year ago and we didnt assign any update scenarios for leading ledger hence no account assignments in new gl tables.Now if we update a scenario like profit center does it impact the transactions previously posted ?
or it just updates the transactions going forward?I have not recieved any error message doing this in development system till now.
I went through the forum and many OSS Notes but I still didnt come to a conclusion that there will be no issues if i do this,let me know if any one has faced this scenario and has any problems doing this.
Thanks,
Sai.

As per note 891144:
. You cannot change the ledger definitions subsequently, or deactivate
   an assigned scenario or a customer field temporarily, or activate an
   assigned scenario or a customer field subsequently (for example,
   assign FIN_UKV subsequently). The relevant fields (characteristics)
   are updated in the database tables of the general ledger (new) only
   after you assign a scenario to a ledger. When you activate
   subsequently, the account assignments for relevant characteristics
   are missing from the general ledger (new) for documents posted
   previously. This is of particular relevance if characteristics from
   this scenario are used in the document splitting.
it should be not critical for the system processing if you activate scenarion subsequently
in your production system.
But please be aware that the data that have been posted before the
activation will still not contain the values in the relevant fields, but
only the documents posted after the activation. Thefore the data will
not be complete.

Do I have to live with dark/dead pixels with my new 15" MBP? Yesterday I bought one and have one dark spot in the middle of the screen.

Hello
Yesterday I bought a 15" MBP and found a dark spot in the middle of its screen right away while in the 1st-time-welcome-boot. What a welcome. Do I have to live with it? It is exactly one pixel missing its yellow subpixel. It would be ok if it would be in some corner - but its right in the middle of the screen. Suggestions/experiences in this matter anyone?

Thanks for your suggestions - took it back - got a new, mint, shiny one

N8 Belle cannot view BBC News Live with BBC iPlaye...

I have recently bought a Nokia N8 with Belle and BBC iPlayer.
I can play BBC1, BBC2, BBC4 & Parliament live (& maybe others) but when I try BBC News live all I get is "Loading".
I am using BT Broadband Wifi, I'm on O2 SIM free, and live in the UK.
Everything was OK on my previous N97.
I can't seem to find anything about this on Nokia forums or the BBC. I have just put a query to the BBC but they don't guarantee to answer them all?!
Does anybody have any ideas on this problem please?

Update:
The Nokia Care Team seem to be assuming it is recorded items that I can't view and havesent me another copy of WMDRM DLA iPlayer plugin version 1.02(1) . I did install it as requested but I still have the problem.
I can view, live, BBC1, BBC2, cbbc, CBeebies, BBC Parliament.
I don't seem to get the option to view live BBC3 or BBC4 (today anyway).
When I view live BBC News I just get "Loading".
Nokia Care are also asking for:
IMEI:
Software Version: 111.030.0609
Strange . . . Is no-one else having this problem?!
Moderator's Note: Personal details removed. We kindly ask you not to share your phone number publicly on this forum.

BrowserLab 1.6.4 now live

For details, see our BrowserLab Team Blog post: http://blogs.adobe.com/browserlab/2011/10/07/browserlab-1-6-4-with-new-chrome-and-firefox- browsers-is-now-live/
Enjoy!
Bruce

Hello Martin,
Our philospohy with BrowserLab has beento provide a resource that is always available, and quick and easy to use. It is also to provide a relevant selection of browsers, configured to reflect the most common installations.
We take the removal of older browsers seriously, and are careful to check browser usage statistics. Once we see that the usage of a browser has dropped to an insignificant level, we talk to a representative sample of BrowserLab users to check for sensitivity to removing that browser. We do this to make sure we aren't missing or forgetting about something important that would make us want to leave an older browser in BrowserLab. E.g., IE6 is 10 years old, but it is important to our users, so we have kept it in BrowserLab.
By removing older browsers, we're telling our users that we think they no longer need to worry about testing them for cross-browser compatibility.
There may be some unique situations for some of our users where they will need to test in an older browser, but they're the extreme minority. To keep BrowserLab fresh and relevant for our user base, and to keep it affordable to run, we will continue to remove older browsers once they're no longer significant.
We've announced that BrowserLab will remain complimentary through April 2012. We'll communicate pricing shortly before then.
Bruce

Xperia Live with Walkman on Android 4.0.4 (with screenies)

My Thoughts on Android 4.0.4 on Xperia Live with Walkman
-Sleeker Font Style.
-Camera Shortcut right from the Lock Screen.
-Able to access the drop down notification bar even when locked.
-Music Player access right from the lock screen
-New Owner Info Option display
-Face Unlock works great on Live with walkman.
-Awesome new themes. Xperia NXT Style! Although they are only wallpapers, not the live ones seen on 2012 devices. My favorite is Tourquoise (Did I spell that right?)
-The Performance Assistant will help you disable some of the apps that you dont need.
-There it is! Official Android 4.0.4. Ice Cream Sandwich. OH YEAHHHH!!!
-If you repeatedly tap on the Android Version Menu. This little Primitive Droid will surprise you. HEHE!!
-Oh, and there's also a new logo when you start up your phone : SONY ONLY not Sony Ericsson, and in its ever-so-recognizable font style. =P
-The Sony Ericsson Liquid Logo has also been changed to Walkman, with a bubbly and quirky animation.
-Ill try to post screenies if I can.
-Greatly Improved Android Browser. Seriously, It's WAAAAYYY smoother than the one in GB.
-The Browser runs smoother than GB.
-Websites with heavy flash content load smoothly. =D
-Saved Pages Option to view pages offline.
- Only Android provides true multitasking capabilities.
- Hold the Home Button and you will be taken to this new recent/running apps tab. Swipe to the right and that app is closed. =D!!!
-Widget Preview.
- A NEW Gallery aside from the Xperia Gallery. The new gallery provides edit options. Like Picsart or Instagram or Adobe Photoshop Express. So, if you want to save some precious memory, stick with the gallery editing options =D
-HD playback still smooth as ever. I don't know what the fuss is all about. =P
-Images look fine as they did in gingebread. It really depends on shooting situations.
-Captured 720p HD Videos doesn't lag for me. Play back is smooth. Same as in gingerbread.
-Maybe, People are just not used to the new interface, but with a little bit of tinkering, you should get used to it in no time. =P
-The New Camera Interface. It now includes a dedicated on screen camera button.
-Captured Photos Quality are the same as in Gingerbread.
-Captured 720p HD Videos run as smooth as in Gingerbread.
- The New YouTube App interface.
- The Lockscreen Music Player
- There was a review about not seeing the clock due to the music player. Duhhh, you can see it at the upper right corner. =P
- I love how the album art and the album name also appears. If you are like me who converts songs from youtube to mp3. A little app called Tune Wiki can help you edit its tags so you can enable infinity view. =D
-The New Dial Pad, which provides Smart Dialing.
-About the lagginess issue. It takes about 2-3 seconds to start. It depends on how many entries you have in your call log.
-There's a workaround on it though, access it through Contacts.
- RAM usage feels the same for me. Good Job on this one Sony. =D
- I was really worried about RAM ever since I read Sony's article about GB and ICS. They did well on optimizing this one.
- My screenshot is not the best there is since I was syncing Facebook inside Xperia. But, normally it has about 180mb used and 160mb free.
- New APPS installed. Some apps like Wisepilot for Xperia can now be moved to SD card, thereby freeing more phone memory.
- My New Homescreen. It retains the very convenient four corner bubbles.
- 5 Widget Panes
- A New Google Search Widget
- Walkman Player. I was expecting the music player from the NXT series. Hehe, but I guess this will have to do. =D
- I've never seen the refresh music library option even in the GB walkman player. Through experience, everytime I add a music file it gets added in real time. No refresh required...
- Oh, and also... I think the speaker is a tad bit louder than before. Like 20% louder. I noted no distortions
- The orange lights work as usual.
- Still no customizable equalizer. This is a walkman phone. It has to have superb music customization capabilities. =P
- Battery usage for me remains the same like in GB.
-Monster Use/Heavy Gaming : 4 hours (HD games cracked for HVGA screens i.e. Asphalt 6 Adrenaline, Need for Speed, Shadowgun, Dead Space) Although I doubt you could play that long due to the screen size and the cramps you may get from playing. Carpal Tunnel Syndrome anyone? Haha.
-Internet Browsing : 6-8 hours
-Video Playback using Stock Player and YouTube App : 6-8 hours
-Video Playback using MX player : 4-6 hours (I use it for my .avi files)
- I use Easy Battery Saver to Optimize battery performance.
In Super Mode it can last up to 24-36 hours with only texts and calls which I think is pretty impressive. I can go on 16 hour hospital shifts without worying about charging my phone.
In Normal Mode it can last 8-10 hours.
-It really depends on how you use your phone. I strongly believe it greatly varies with every user.
- Don't believe posts that say it doesn't run as smooth as GB. IT RUNS AS SMOOTH AS GINGERBREAD. EVEN BETTER. =P
- Sleeker new user interface.
- All of my apps and games still run smoothly on ICS. I'll keep searching for bugs.
- The ROBOTO font is awesome.
- I find the interface more intuitive and streamlined than GB.
- Lots of new features implemented. i.e. Smart Dialing, Face Unlock, Performance Assistant
- Icons have been remodeled.
- I also love how fluid it is now when it switches screen orientation. =D!!
- No bugs for me whatsoever.
- I miss the quirkiness of the GB user interface. Like the transparency of the messaging app. But I guess, I have to move on, change is for the better.
- A SOLID AND STABLE UPGRADE. NOW MY XPERIA LIVE IS COMPLETE.
Problems:
-Yes, the LED SMS notification doesn't work. But all other LEDs work. i.e. Yahoo Messenger, Incoming Calls, Twitter. I guess they may have overlooked this one. It's the only problem that I see. I find it livable still. Greater good for the greater number of people =P
-THANKS TO SONY!!! A huge step on the right direction.
-KIMOZAVE - NOOBIE SMARTPHONE USER

hi kimozave, ur review seems to be full of praises for ICS, but I have gone through many threads on disadvantages of ICS, so very much confused if I should go with ICS update or not....
can you plz tell how was is experience on:
1. Dial pad - I have read its laggy.
2. The phone is having a hard time authenticating wifi connection when using WPA encryption.
3. Thumbnails in the gallery does not match the original picture.
4. Phone dies at 10% battery remaining.
5. SIM card keeps ejecting
6. Camera is more laggy and image quality is poorer
Thanks,

Problem with new firefox tabs and window focus

Here's a problem that I've had for ages - sometimes it annoys me, other times I can live with it. Right now it's really p***ing me off. :x
I have selected 'a new tab in the most recent window' under FF's Preferences->Tabs->Open links from other applications in:, so as an example, if I click on a URL in a mail in Thunderbird, Firefox opens it in a new tab. However, window focus stays on Thunderbird. I run both of them full screen, so although I'm looking at the web page in Firefox, anything I do on the keyboards affects Thunderbird. It affects URLs opened from other apps too e.g. if I open a terminal and do
firefox www.archlinux.org
focus stays on the terminal window. The only exception is when firefox is not already running - in that case, firefox launches with focus.
DE is xfce4, and the system is completely up to date.
I've done some googling, and AFAICS, nobody else seems to have this problem. Any ideas, anyone?
TIA.

Thanks MAC!EK - definitely a useful add-on, but it still doesn't solve my problem. In Tab Mix Plus Options, I have the following selected:
Links -> Open links from other applications in: New tab
Events-> Tab Focus -> Focus/Select tabs that open from: <all>
However, the behaviour is as before i.e. I click a URL in Thunderbird, it opens in a new tab in Firefox, but window focus stays on Thunderbird. Within Firefox, the newly-opened tab is selected or focussed, but Firefox itself is not.
Anyway, thanks again. I think I need to keep looking.

I'll just live with the terrible battery life on my iPhone 5....

IMHO, each new iPhone has worse battery life than the one before. I've come to expect this. They claim the battery is better, but in real life use, this is simply not the case. I've given up trying to figure it out, I'll bring it into the apple store tomorrow, maybe they'll even swap out the phone for me, but I doubt it will make a difference. The battery is plain awful, but I'm never far away from a charger, whether it's in my car or office. I've grown used to it at this point. Nor am I going to do one of the 10,000 suggestions I keep seeing on here and other forums. Restore as new? No thanks, it's just the way I want it, I don't want to spend 6 hours loading everything again. Turn off location services and apps? What's the point of offering a feature if you can't just leave it on and use it? I have everything (well, almost everything) on. Wifi, brightness all the way up, location services, it's all on. Why? I like using them. That's why I bought the phone in the first place!
So, the bottom line is: I'll live with it. I'll live with having to charge it a few times a day, I'll live with the fact that it'll never be perfect. I will go to the genius bar just for the heck of it, there are issues with iCloud not backing up, and wifi not as strong as the 4S, and sometimes the usage and standby times are identical, so perhaps mine is defective, but I doubt it'll make much difference. Sure, 6.1, or 6.0.1 will be released soon to address these issues, as I'm convinced this is mostly a software issue, but at this point I'm done trying to figure this out.
D

Hello there, EdisonGurraj.
The following Knowledge Base article should provide you with assistance in what steps to take to troubleshoot your iPhone's battery life:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Speifically:
Battery life seems short
Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
Try turning iPhone off and then on again.
Connect iPhone to iTunes and restore iPhone.
If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
Cheers,
Pedro D.

B2 Error with new MSI GTX 970 :(

Hi there team!
Just registered to try and get help. I spent around 6 hours researching + trying all the suggestions throughout many different forums, but the B2 error still persists. I am currently running the following spec:
Mobo - MSI Z68A-G43 (G3), with version 4.30 ( I flashed bios last night and still no help)
CPU - Intel® Core™ i5-2500K Processor, 3.5GHz etc.etc.
RAM - Corsair Vengeance 2x4gb at 1333MHz
GPU - MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5
PSU - Cooler Master Silent Pro 700W
I have tried:
-Taking out the card and using the on-board graphics to flash the bios to later version, No help. (during this process, the B2 error does NOT show up)
-Upgraded the card to latest nVidia drivers, even uninstalled and re-installed them. No help.
-Upgraded all the drivers from MSI, i.e. chipset etc. through Live Update 6. No help.
When the card is in, I cannot even access bios, it just gets stuck at B2 screen for like a minute, and then carries on with the boot process. I am able to play games etc. after the booting, but this error for sure should not be there when the PC boots up. I didn't have any issues with my old GTX 560 TI. I've read different forums saying that it might have something to do with the mobo thinking that something has to be connected to the on-board graphics; or that flashing BIOS helped a lot of users, but not me :(.
I don't have a second PC to test the card on.
Literally, I would try anything, please someone just help :(( This card is a beast and I wanna be able to properly use it and not having to worry about this error.
Thank you very much guys, hope someone can help!

Quote from: gabe_dimitrov on 08-February-15, 20:40:51
Man thank you so much! It is finally working!!! Thank you!!!! ))) It is showing correct version in BIOS, does not show B2 error whatsoever, all done! )
Thanks for your time! You can close thread, but it's very useful for anyone that has this issue!
Wich version of BIOS do you have installed? Can you OC your processor with new BIOS?

How to connect to Xbox Live with the Actiontek GT704-WGB wireless router

If the title got you here, then you are probably a Verizon DSL customer who is trying to connect your Xbox to Xbox Live with the Actiontek GT704-WGB wireless router and are getting nothing but errors saying, "your NAT is set too high", or, "Your MTU setting is too low", etc. Well, after many calls to Xbox support, Actiontek support, and Verizon support, I finally came up with the solution myself.
All that is needed is a little techie know-how about router settings and you'll do just fine! However, if you are uncomfortable with doing it yourself (and it is really really easy to do!) then you can call Verizon support and have a tech support rep remotely conntect to your PC and make the changes for you: however, you have to speak with someone in advanced tech support and to do that you have to agree to a 1 year support contract to the tune of $14.95 per month in order for them to do it! Scam??? You be the judge!
So, here are the steps to take to get it working and by the way, YOU CAN NOT GET THE XBOX TO CONNECT TO THIS ROUTER WIRELESSLY!! YOU MUST CONNECT YOUR XBOX TO THE ROUTER WITH AN ETHERNET CABLE IN ORDER FOR THIS TO WORK!!! If you don't heed this warning, you will unfortunatly go through all the steps below, only to find that you get the same errors but, ethernet is faster than wireless so it's better!....right?.....right? (hears crickets chirping)....right? Oh well, I tried! Also, you must have your Xbox on in order to change the router settings (which you'll see why later) Anyway, here's the steps:
1) On your PC, open a browser window and type in the address bar: 192.168.1.1 and press enter.
2) You will then see the interface on which you will make changes to the router's settings. If at any time you are prompted for a username and password (which should happen right after you press enter) the defaults are: username: admin password: password. If you have changed these, enter what you changed them to.
3)Click on the icon on the top labelled "Advanced Setup"
4)In the left section, click "WAN IP Address"
5)At the warning screen, click "yes"
6)Scroll down until you see "MTU setting" and enter 1370. NOTElease don't be tempted to either enter 1500 or leaving it at 1500 (which is the default) because you might know that 1500 is the maximum at which this can be set which is TOO HIGH AND WILL NOT WORK! Trust me and enter 1370 and then click on "apply"
7)Click on the top icon labelled "Security"
8)In the left column, click on "applications". This is where we are going to open the 3 ports that Xbox Live uses to communicate with your Xbox.
9)In the drop down box labelled "PC Name" select "Xbox 360". This is why you had to have your console on and connected cuz if you didn't, it would not show up on the drop down list!
10)Under "category" click on the bubble next to "user"
11)Click on "New" which is one of the blue buttons near the bottom.
12)As for the rule name, I entered "Xbox" but you can put whatever you want but I'd use that so you know it's the ports you opened for the console.
13)For protocol, select TCP. (Yes you will also open the same ports for UDP but for some reason if you select TCP.UDP instead of doing them seperatly it doesn't work.....I dunno why!?
14)For all 3 "Port start", "Port End", and "Port Map Start" put the # 80.
15)Click "apply"
16)Now, select UDP and put the same port # 80 and again click "apply"
17)Repeat steps 13 through 16 except with the numbers 3074 and 53, clicking apply after each one. What you should have now on the bottom are a list of all the ports you opened, one TCP and one UDP for each number totalling 6 entries.
18)Click "back" to return to the Applications screen.
19)If you have to, select Xbox 360 for PC name, and click the bubble next to "user" and you'll now see the entry called "Xbox" or whatever you called it.
20)Click that entry to highlight it and then click the blue "add" button to the left and then click "apply" at the bottom.
21)Close the browser screen and turn off your PC and Xbox and any other hardware connected to the router.
22)Turn the router off and unplug it and wait about 5 minutes. It can take this long for any residual current in the router to dissapate and for the NAT table to clear itself.
23)Turn on the router and wait for the internet light to come on green meaning the router has booted and has an internet connection.
24)Turn on the Xbox AND ONLY THE XBOX!
25)There is no need to go into network setting as when the Xbox is connected by ethernet, it automatically configures and connects intself. You can, however go into network settings and perform a connection test but this to is not necessary.
You now should be able to connect to Xbox Live! If not, you've done something wrong and must either go through all the steps again or let Verizon do it for you (for a fee that is).

I followed jtktlw's instructions to the letter. Problem was I had already enabled UPnP before doing so. Afterward I disabled UPnP and rebooted....no change. I reset the MTU to 1500...boom, it works. Seems for me all I needed was to open the right ports to get it to work.

11 Nice Features with New Awesome & easy Magnetic Pen Tool (Updated)

1.      Scale effects during the scaling object, in the control bar there is more space (Empty) that will be the helpful to show you the example of the picture that I have made myself, when you transform any object, you will see these options in the control bar.
2.      Save preset of filters in filter gallery:- will be really powerful, it must be exchangeable so that we could send that preset to any one, it must be applicable on percentage(%) of document size, (depends on document resolution).
3.     Filter gallery must be the (live filter gallery), if this works on any raster object without converting to smart object, this will be helpful for creating live PSD.
4.     History panel:- history panel must save the history of document. It will be helpful and powerful, we could apply that history to any document like actions, and history should not be saved with document itself, it must be separate like actions, create 2 arrows in the bottom of panel like layer combs’ panel, to check the history, if any step is wrong we could be able to remove that step,
                              OR
5. Also create/convert history into action, see the pic as example,
If (to Adobe Photoshop Team) history saving is not a good idea! Then before closing the document you must convert history into actions, when any person saves document and has forgotten converting history into actions and wants to close the document, at that time that dialogue must be opened, (Do you want to convert your history into actions, when you open (that) document again you will miss history, and also must create a CHECK BOX for don’t show again.
6.     Layers Group:- In the group (folder) we move the objects with move tool and it moves all grouped objects that’s much better, but when we open the group (Folder), after opening it moves also all grouped object !!!, that’s not perfect, I suggest you how to do it, double click on grouped any object to open the group then move any object, and double click on any grouped object to close the group (folder). ( like Illustrator )
7.      Photoshop Extended can create powerful creative animation with audio and animation panel support completely the smart object and smart object makes animation really smart. But the problem is that it takes too much time to generate animation of few seconds and generated video file size is very large up to 1.GB.
        Here is solution, like new document dialogue box under the Device Central button it shows the document size, as hint, same way in the render video dialogue box it must show the file size and generating time and reducing file size hints.
        I had created (20 months ago) in Photoshop extend CS3 really awesome animation of earth, from where it starts it ends there, and shadows on earth are really awesome, map that moves to the shadow side, it changes from day to night and in the shadows you can see the roads’ and cities’ lights’ just like real night map photo it happens like naturally cause of smart object, I have two photos of the map day and night used for animation, you can see that creative animation on youtube.
(Link)= http://www.youtube.com/watch?v=sd86xGIkQxM
watch this animation in full screen Mode, b/c Youtube has reduced the Quality of Video.
8.   Welcome Screen:- Why welcome Screen is necessary?
                Adobe’s all products must be linked with Design sequence. (Interface)
Design Standard Suite which itself is a famous printing and publishing suite for design ( creation) layout, must keep same sequence of all products and should not affect the attraction,
                Example for Interface, now if CS6 all programs are created with new interface will you don’t change the Photoshop's interface???
Here are my Design Sequences Examples
These Pictures I have Designed in Illustrator
Photoshop with Welcome Screen Looking like Illustrator & Indesign now it matching with its Family.
Benifits of Welcome Screen for ( New ) user
A.    Many people don't know that Photoshop has free few samples with it these are nice example to understand that what photoshop can do!
B.    Photoshop Exchange : is really Necessary : for to exchange Workspace, color profile, Actions, Key Board Shortcuts, Layer Styles,    Swatches, Filter Gallery Presets & PSDs etc.
C.    This will be helpful for New Users TV.Adobe.com they will watch free teqchniques, as see this welcome screen.
D.     Any older user don't want to see the welcome screen that person can turn on that check box (Don't Show Again).
9. Pen Tool + Magnetic Pen Tool =
In my idea pen tool is the perfect tool for vector drawing it gives us perfect result as we want. but about those people like (Toys-R-Us (One Really Big Pen Tool Shortcoming) or other like him, if they can't understand, although pen tool is very easy to use, & he wants short key without going back for to breatck the handle, (for those people) if you want to create short key then short key should be "c or any easy" press to breat the handle, then press again to get back handle again during the using pen tool, or create a magnetic pen tool it must work like magnetic lasso tool works for selection, it will be the best & easy to use & to understand, during to use this tool if it goes to wrong way simply press back space key to go back to last step same like Magnetic Lasso.
(Awesome Magnetic Pen Tool)
or create pen tool like fireworks its pen tool shows next click's preview (very nice pen tool is in fireworks to understand ( really Awesome )
10. keyboard shortcuts like Illustrator for Blend Modes Next , Previous & Opacity 10 to 90, I had started to learn Illustrator CS3 & since CS3 I use these shortcuts for that, (~)tildi for next blend mode, Shift (~) tildi for previous mode, & opacity 10=1 key 20=2 to 90=9 key
11.PANEL ICONS Should be Attached under or above the tool Bar but not on Right or Left Side only ( like Indeign CS2 ).
Note :-
I shall appreciate your frank comments on the above suggestions.
Message was edited by: Muhammad Amjad Khan Abro
Message was edited by: Muhammad Amjad Khan Abro

OK Here goes my wannahaves...
1) create new table or sheet from a file instead of having to open the file and copy/paste into current document. ie "Insert Sheet from file", "Insert Table from File"
2) show linked data from a data source other than the address book - eg an ODBC data source or Filemaker database
3) Ability to paste a filtered table into a new table with just the found rows.
4) Ability to freeze rows and columns to allow for very wide or deep tables
5) When typing data into a cell, automatically adjust its width as you type. Depending on your enter key config, hitting enter puts a new line in the cell and adjusts the row height to fit.
6) Printer page formats default to regional standard: eg in Australia, UK - A4
7) Popup list or menu contents based on a data range: eg a list of categories
8) Media to be selected from anywhere on the system, not just in iTunes/iPhoto (eg most of my video is on an external hard drive)
9) "Autofilter" based on contents of the column.
10) Vlookup and other reference functions: need to be able to select a table (by name) as your range, a column/row (by name) to look up from and a column/row (by name) to retrieve. All functions should work this way, not just the basic ones.
11) When inserting a table you should be asked how many rows and columns.
12 "Format painter" - copy styles and other formatting from cell to cell and table to table.
13) Outlining based upon repeated cell values

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out?

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out? Also will I be able to get Icloud to work?

Hi Mary, the other so called "Features" of iClound will not work for like Syncing, but eMail will.
MobileMe & dot Mac will still work last I heard.
iCloud Mail setup, even in 10.4/10.5…
Don't delete your old account yet. Just setup a new one in Mail>Preferences>Accounts, little plus icon. Choose IMAP as account type, not ,mac or MobileMe.
IMAP (Incoming Mail Server) information:
          ▪          Server name: imap.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 993
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password
SMTP (outgoing mail server) information:
          ▪          Server name: smtp.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 587
          ▪          SMTP Authentication Required: Yes
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password

BrowserLab 1.6.2 is live with new browser support

Similar Messages

Maybe you are looking for