Browserlab not loading from CS5 Dreamweaver

Hi,
I am using Dreamweaver CS5 and have previously been able to connect to the online Browserlab to test a page layout in several browsers.
I am using a Mac platform.
This no longer seems to work. It used to load the browserlab site into the browser and then download the browser options so I could view the different types.
I am not aware of any changes I have made to Dreamweaver. Can you help?
Thanks

Make sure your Dreamweaver is updated with the 11.0.4 update (build 4993).
You can go to Help > Updates in Dreamweaver to check for and install the update, or go here to download for manual installation:
http://adobe.ly/DWUpdates
If you are still having issues after updating, be sure to reply to Mark's question in as much detail as possible.
Kind regards,

Similar Messages

Image will not load from lightroom to CS5

I am having an issue with external editing from lightroom to CS5! From develope>edit in CS5>images does not load! CS5 loads but the MAC finder app comes up asking me to choose a file! Never have I seen this. I looked into the preferences and the external editing, but its in the external editing already. Help!

Make sure your external editor settings link to the application in support files (hidden on Lion) rather than a shortcut.
http://kb2.adobe.com/cps/909/cpsid_90947.html

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Java console not accessible, will not load from FFx tools dropdown menu (had same prob with 3.6.15). Latest Java installed and IS accessible thru control panel

XP OS, have NoScript installed, disabled, Java console still will not load from FFx.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Counters not loading from saved PerfMon html settings file in IE

The Settings html file is hosted on our internal trusted web server, the perfmon interface loads but no counters load.
If I right click and go properties there are no counters configured. If I add a counter that works, but upon reloading the page the counters do not load from the HTML source file.
I check the source of the HTML, and the counters are there, but aren't loading.

if you open the file from a local drive it does work, but I cant get it to work from a network folder.

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I am resurrecting my old iMacG5 for my grandson. Appleworks has question mark in dock and does not load from bundled software on original installation discs. Can anyone help?

I'm sorry no-one has answered you yet - I'm afraid I don't know the answer to the question: but I wanted to put into your mind that starting up with AppleWorks at this stage isn't a good idea. The program was 'end-of-lifed' years ago, it won't run on Lion, and some of the document types created in it - Databases in particular - cannot be opened at all by any other program whatever. Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (with some reservations in both cases), but building up a collection of AppleWorks documents at this stage is going to lead to problems later on.
It's difficult to know what to recommend for a PowerPC machine that would still be compatible with modern ones. An older version of Microsoft Office, perhaps, if you can find one which will run on PPC; but most of the modern Word Processors are Intel only. This is something you would need to investigate.

Transferring notes/grades from CS5 to photoshop element 10

Hello,
I own CS5 and just purchased photoshop element 10.
I have a question concerning how to transfer notes/grades from CS5 to photoshop element 10 ?
For example, in CS 5, I have given a 5 star grade to a picture. However, when I open photoshop element 10, this grade doesn't show up. Would you know how to transfer it so that I don't have to re-grade all the pict in PE10.
thanks in advance and best regards,
Pascal

Barbara - thank you for this tip. I did so, and ended up with this
message: "This catalog is from an older version of Elements and is
currently not supported on the Mac platform. Please create a new catalog
and then import your media files." It goes on to indicate that I may be
able to get membership services through Photoshop.com. . .but I'm wondering
if you have any advice on the first suggestion, that is - specifically how
to create a new catalog and then import media files?
Thanks again!

Itunes will not load from external hard drive

My Itunes will not load from my external harddrive. worked fine a few days ago.

I do not have any exclamation points - missing songs do not show at all. I had to click 'locate files' when I opened iTunes after reorganizing, since there was nothing there anymore

Apps not loading from cloud

My son just got a new iPhone 4S some of his apps are not loading from his cloud storage.

That is not the way to get Apps, they can only be downloaded from the App store.
Apps from a DVD will not be related to your iTunes account and therefore will not be transferred to your iPad.
The only way to install Apps on to an iPad is to download them from the iTunes Store.

TS3991 why are 2 of my Numbers documents not loading from icloud They appear in faded grey and I can't open them ? How do I recover them ?

why are 2 of my Numbers documents not loading from icloud They appear in faded grey and I can't open them ? How do I recover them ?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Xml file not loading from different server

Hi,
I have a simple flash banner that is pulling a number from an xml file on a different server. When it gets to the frame where the number should be it just says "transferring data from eckul.com" and will not actually pull in the number. Unfortunately I can't put the files on the same servers. Any help would be much appreciated, below are the links and the xml code I'm using followed by the action script. Cheers
http://www.sainters.net/newsletters/2010/flash_test_membership2.html
http://www.eckul.com/number.xml
<?xml version="1.0"?>
<inventors>
    <person>
        <name>892</name>
        </inventors>
function loadXML(loaded) {
if (loaded) {
_root.inventor = this.firstChild.childNodes[0].childNodes[0].firstChild.nodeValue;
_root.comments = this.firstChild.childNodes[0].childNodes[1].firstChild.nodeValue;
name_txt.text = _root.inventor;
comment_txt.text = _root.comments;
} else {
trace("file not loaded!");
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("http://www.eckul.com/number.xml");

so, in frame 1 of your fla before you execute that cross-domain load method, use:
System.security.loadPolicyFile("http:www.yourcrossdomain.com/subdirectoriesIfNeeded/crossd omain2.xml");
where the following (crossdomain.xml) is in www.yourcrossdomain.com's root (IF you want to allow allow subdirectory policy files):
<!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
</cross-domain-policy>
and in the subdirectory (and its descendents) that you want to allow access put crossdomain2.xml:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="www.thedomainthatstryingtoloadcrossdomaindata.com" />
</cross-domain-policy>

Images are not loading from initial domain when using a cdn

Hello, i have a wordpress website on which i set the w3 total cache plugin with a cdn, the cdn is MaxCDN and is configured to not serve images but only css & js & font files. Because i configured the cdn not to serve images, the images in css files have the src as absolute path, path which point to original website domain, something like this: background-image: url("http://www.originaldomain.com/images/back.jpg");, the css file is served from the cdn like this: http://cdn.originaldomain.com/css/style.css . So the problem is that firefox refuse to load the images referred in style.css file, images which probably appear to be in another domain. If i try to load the images directly in browser, using address bar, they are loading ok, but on loading from css file i got a http error 500 (acording to firebug). The same website is loading ok in other browsers: ie7/ie8/ie9, opera, safari and chrome. Can anyone help me to solve the issue?

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

SWF Loader - not loading from variables

<mx:SWFLoader
id="imgComp" width="250" height="150" source="C:/projects/Flexprj/file1swf" autoLoad="true" complete="fnTest()"/>
The above code is working find and it is loading the swf fine
The problem comes when I read a list of files and load it.. I read a CSV file, to get a list of SWF names.
Then I have the following
for
(var iLoop:int=0;iLoop<_arrBanners.length;iLoop++) {      imgComp.source =      imgComp.source =
_arrBanners[iLoop];     imgComp.load();
1. If I give something like this. It is not loading the SWF and
2. If I give a URL for the imgComp.source , does that download the SWF each time. If so, is there any way to download all the files to local and load from thr.
Thanks & Regards
mxvx

I'm not sure I understood the question, but if you use SuperImage from
quietlyscheming.com, it will cache images in memory so if you try to get
them again it will be very quick.

Fonts will not automatically enable in Font Book, fonts also will not load Adobe CS5 Indesign or Illustrator.

Hello,
My fonts stopped enabling automatically in font book, and do not load in Adobe Indesign CS5 or Illustrator CS5 when I use these programs.
The font names are usually displayed in brackets such as [Times New Roman] in the drop down menu for fonts.
So far I've found two different libraries for font, but I'm not sure about deleting them for fear of losing my fonts.
Also where do I find the font cache? If I clear it, can I possibly get the fonts to enable themselves again.
I'm using a 2006 Macbook Pro, and running Snow Leopard (Mac OSX 10.6.8).
Thank you in advance for any help.

~Bee wrote:
If you're going to use another person's wisdom here, […]
[…] It's considered good manner here. […]
Thank you for your reply. I have a few comments of my own.
(1) You, ~Bee, accused me of using "another person's wisdom here". In some quarters, this would be called plagiarism.
If I were Oscar Wilde, I'd say that bad manners were a far more grievous sin than plagiarism. But I'm not. Good manners is one thing, and I'll be the first to admit that my manners can stand a considerable degree of improvement. Plagiarism is something quite different, and I deeply resent being accused of such an action.
(2) In this recent thread
<https://discussions.apple.com/thread/3648940?tstart=30>
I see a Level 5 contributor doing precisely what I did. Yet, curiously enough, I see no guardian of good manners jumping up to chastise him for it. Am I to understand that this is a case of quod licet Jovi, non licet bovi? We're supposed to do what our betters say, not what our betters do? (Of course, I'm absolutely, positively sure that you, ~Bee, have never, ever, replied to a post simply with a link.)
(3) In two recent threads, I've had occasion to direct OPs to the same web page
<https://discussions.apple.com/message/17201779#17201779>
<https://discussions.apple.com/message/17245704#17245704>
In the former thread I wrote,
You need to read Kurt Lang's paper on font management
In the latter thread I wrote,
Read Font Management in OS X, by Kurt Lang. The author is a frequent contributor to this forum.
And you must be very well aware of this, because you posted yourself in the latter thread, not once, but thrice.
Knowing this, I don't see how you could have had any reason to accuse me of "going to use another person's wisdom here".
Knowing this, you could have made the charitable assumption that I was, possibly, in a bit of a hurry when I replied with nothing but a link, and act accordingly. (That, incidentally, would have been considered good manners in my part of the world.)
Does that seem like too much trouble, ~Bee?

Classes are not loading from WEB-INF/classes directory

Hi All,
I am in a deep troble because the class files in the WEB-INF/classes directory are not loading.
I have deployed the application in Tomcat 6 server. And stored all class files under WEB-INF/classes dirctory. But when I execute a JSP page, I am getting following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
JSP FileName:/hello.jsp
An error occurred at line: 1 in the jsp file: /hello.jsp
com.flt.Test cannot be resolved to a type
1: <%=new com.flt.Test().hello()%>
Stacktrace:
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:98)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)The classes are available in the WEB-INF/classes directory and the folder name and package name of the classes are correct. I have also tried to execute the application by creating a jar file and put it in the WEB-INF/lib directory. But I am getting same result.
Is it the problem with Tomcat configuration? When I gone through Tomcat documentation, I get to know that the WebAppX class loader in Tomcat, loads application specific classes for a web application. Is it possible to start/stop WebAppx classloader manually?
Please help me to solve this issue.
Many Thanks,
Francis Lukose
Edited by: francis_ on May 13, 2008 10:03 AM

Thanks for your reply, Soultech2012.
<%=new com.flt.Test().hello()%>is the only code in the JSP page. Just a single line. Nothing more than that.
The code in Test.java is as follows:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package com.flt;
* @author Francis Lukose
public class Test {
    public static String hello()    {
        return "hello";
}Many Thanks,
Francis
Edited by: francis_ on May 13, 2008 6:45 PM

Browserlab not loading from CS5 Dreamweaver

Similar Messages

Maybe you are looking for