Browserlab only showing top half of page

The first link on my home page www.ReduceStressNow.net is http://www.reducestressnow.net/breakthrough
But when I Command click this link in IE9, then Browserlab only loads half the page.  There's an Expander with eleven entries, immediately before the Scientific Proof/New Scientist section and browserlab stops showing after the first few.  The rest of the page is missing.
This is perhaps why none of its first six links are working (see the fifth paragraph on the /breakthrough page.)  They are all same-page links to further down the page in the missing part, the first one is: www.reducestressnow.net/breakthrough/#new-scientist
I'm using the main Browserlab interface with Mac Snow Leopard  and Firefox to check my site works in Windows Internet Explorer.
Warm regards,
Cris
Fyi the page navigation keys don't work in the browserlab pages although they are working on the browserlab forum in a separate tab in the same window.  That's page top, page bottom, page up and page down on my extended keyboard.

This is not a bug. BrowserLab has a limitation on the size of screenshots it will take... currently that's a max of about 4000 x 4000 pixels. It looks like your page is considerably longer than and thus is getting cropped on the server. And you're correct, that's why those in-page links don't work. I'll go ahead and forward this on to our product manager as an enhancement request to be able to handle larger pages.
Mark

Similar Messages

  • I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.

    I keep getting internet explorer cannot display web page when trying to download itunes. This only shows on half the page where the download link would be. My internet connection is fine.  Any idea what the problem may be?

    You won't see anything obviously related to iCloud, Jimmy. But if you go to the home iTunes Store page while logged into your iTunes Store account, you should see a Purchases link now under the Quick Links header. That's the only part of iCloud active at this time.
    Regards.

  • I used the ticker tape mode to add subtitles to a clip. When playing it in the pc, the Subtitles are fine, however, when playing it on the tv, only the top half of the words are visible. Any idea why?

    I added subtitles to a movie clip using the ticker tape option. When viewing on the iMac, the words are visible, however, when playing it in the tv, only the top half of the words are visible. Does anyone know why?

    I would agree with Keith Barkley, it may be the TV Safe Area. You can see what spots might be blocked out or cut off by going to iDVD and opening the original DVD project, under the View Menu > Show TV Safe Area. If your title gets cut off by the cropping rectangle displayed, that may account for the cut-off.

  • Downloaded latest version of safari and it wont open properly only the top of the page open???

    i was running safari on my ibook and all of a sudden it stoped working it wouldnt load the page only the top of the page would load. so i went to firefox but when i stream videos of firefox they always seem to be jumpy. so i have recently downloaded the latest safari again and i am still having the same problem as before where only the top of the page ill load?? i have the latest updates of osx 10.5.8. i believe its something to do with my computer???

        iBook G4/1.42 14-Inch (Mid-2005 - Op)                 1.42 GHz PowerPC 7447a (G4)
        Intro. Date:     July 26, 2005    Disc. Date:     May 16, 2006        Order No:    M9848LL/A    Model No:    
    A1134 (EMC N/A)        Subfamily:    iBook G4 - Mid-2005    Model ID:     PowerBook6,7        Std. RAM:     512  MB    Std. VRAM:     32 MB        Std. HD:     60 GB (4200 RPM)    Std. Optical:    4X "SuperDrive"       
          this is the one i have that is the same amount of ram on it to

  • PDF only shows the first 4 pages

    I am trying to convert an Excel spreadsheet to .pdf format
    via Adobe's 5-copies-free converter. It seems to work at first
    blush. But when I read the .pdf version, it only shows the first 4
    pages of my Excel spreadsheet. This leaves 75% of my spreadsheet
    unconverted. What gives here????

    Hi, could you clarify, are you using acrobat.com to convert
    your excel file? What is the file size of the file and the version
    of Excel? Thanks.

  • Only printing on half of page

    Below you can see the settings I have used to print the page. And What the page came out like.The paper is 220gm Gloss.Thanks! 

    Here is what you need to do.  On the printer go to the diagnostics menu and then choose the pq troubleshooting and select. The printer will print a number of pages including 4 sheets of solid fill color i for each color.  This is where you will see the missing color and most times it is only 1 toner that is having an issue.  This does not mean that particular toner is bad as it could be a bad slot.  To find out you need to go to the same diagnostics menu and then scroll down to disable cartridge check and select.  When the printer says ready, diagnostics mode, open the toner door and remove all the toners.  Now I will give you some examples of what to do next.  Let say the Cyan toner only prints on half the page.  You will want to take the black toner cartridge and place it in the cyan slot.  Close the door and run the same test pages again.  Most will be blank, but you should get 1 page of solid fill black.  If the page is ok unlike the cyan page, then the issue is the cyan toner.  If the page has the same problem as the cyan page, then the slot has an issue and most likely the laser/scanner lens are dusted over. Sometimes you can lift the shutter in the back of the toner cavity for that color and use a qtip to clean the lens.  Most times the laser/scanner assembly need to be removed from the printer which is not easy and then the optics cleaned.

  • Show Top of the Page after Click Save button

    Hi all,
     i have requirement i want show top of the page after click of save button.if you know answer please give reply.
    Regards
    VeerendraNadh

    Hi,
    Would you mind providing more details(screenshot would be better) about your requirement? It would make others easier to find a solution for you.
    Suppose that there is a scenario like this: Edit a page, when content grows too large, page will scroll to the bottom of the page. When clicking “Save” button in the
    ribbon, by default, page will scroll to the top just like it is first loaded in the browser.
    Feel free to reply if this is not what you really mean.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Opening PDF at nameddest works for top half of page

    How do I get a PDF to open at the bottom half of a page using named destinations without the PDF opening at the next page?
    Steps I've taken:
    1.  Created bookmarks, which work correctly for each item on a page
    2.  Created named destinations for each bookmark (that is, I clicked on the bookmark to take me to the text, and then I created a nameddest)
    Results:
    All bookmarks work correctly and go to the text I want.
    Only the named destinations that go to the top half of the page work correctly.  If the named destination is set up to go to text in the bottom half of the page, it doesn't go to the text I want.  Instead if goes to the top of the following page.  Is there a way to fix this problem?

    Called 800-APL-CARE. Determined failure was due to getting caught in the rain yesterday (shorts got pretty damp, but I didnt think damp enough to cause a failure like this). Apple tech reminded me that 1st gen iPhone was quite susceptible to moisture intrusion (speaker holes and headphone jack most notably, as we all know). Unfortunately, moisture damage is not covered under warranty, so I am screwed.
    Was planning on upgrading to 3G iPhone anyway, but the lack of stocking at my local AT&T stores leaves me in a tough spot right now, with an important business trip planned this week. Perhaps I should get a disposable phone and pull the SIM from my iPhone and use it until I can get my hands on a 3G iPhone?
    Message was edited by: gunnyhighway

  • New video clips only show bottom half of frame

    Video clips shot with my new video camera only show the bottom half of the frame in Premiere Elements 3.0.  Older video clips show up just fine.

    goshawk28776
    You say that this 1/2 video display is related to video from your new camera and Premiere Elements 3.
    The problem of the 1/2 video display has been associated specifically with .wmv format and a recent Windows Update kb file.
    But, I would ask, just whar brand/model camera do you have that is shooting .wmv video?
    By the way, what computer operating system are you running Premiere Elements 3 on....Windows 7 32 or 64 bit or Windows XP 32 bit?
    The Announcement that we have post at the top of this forum is as follows:
    Announcement: Windows Update Causes Half of Display to Be Blacked Out
    Hide Details
    MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
    "MS bulliten MS13-057.  Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
    For us, it occurs when decoding WMV9 files.  Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
    You can uninstall these windows updates to resolve your problem."
    There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
    Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
    This notice suggests deleting Windows Update kb 2834904 for Windows XP, and Windows Update kb 2803821 for Windows 7. So, please let us know your situation and whether any of this applies to you and whether your problem was solved by taking one of these actions.
    Thank you.
    ATR

  • PDF sent from SAP 4.6C only shows the first 10 pages

    Since a few weeks a spoolrequest that is produced by a job contains more than 10 pages. This report is automatically converted to pdf and mailed to an external recipient, but the pdf only contains the first 10 pages.
    When I look into this spool request in SAP, I can see all pages.
    Does anyone know how to include all pages in the PDF?
    thanks in advance,
    Maarten Ettema

    hi,
    by default only the first 10 pages of spool are being saved (or converted to pdf in another way). you can change this settings. here i'll show you the way :
    - goto SP02 or SP01, input suitable parameters
    - select your spool request
    - press F6 to display the content
    - navigate to : goto >> display request >> setting
    - from popup window, on "Display Area" section, you can set the page settings for your spool. the default value is only from page 1 to 10, you can set it as you need (in example from page 1 to 100), but beware, setting it too high in some case will cause memory issue.
    hope it helps you.
    rgds
    alfonsus guritno

  • Browser Only Shows 35 Rows per Page

    I have a Business Exploder query that I display on the web.  However, it only shows 35 pages at a time.  Can I increase this to all rows?  I don't see an option in the query properties, and I don't have access to any stylesheets.
    Thanks.

    For table web item, set the specific property - "Number of Data Rows displayed" to 0 (zero) This will show all of the records returned.
    But be careful about large number of rows as browser will go for a spin. It does not stops as excel does for 6000 rows.

  • Illustrator tutorials only show top of the screen/won't scroll on Mac OS X Yosemite

    I've just downloaded Illustrator onto a brand-new Mac running OS X Yosemite. 
    I've never used Illustrator before, but am familiar with Photoshop.
    I've got the screen with the tutorials/tips open.  It will only show the top of the screen - there is clearly lower information, but I can't get to it.  I can just click on the videos on the bottom of the screen, but can't scroll down to see them. 
    Tips?  Any idea what is happening?

    The tutorials are downloaded from the internet, so in case your Firewall settings don't allow Illustrator to get them or the internet is down, then you might not be able to see them.
    What happens when you scroll way down - there should be a button to hide the welcome screen. Is it there?
    Maybe some staff people can shed some more light on this.

  • It wont show my music it only shows top songs and other types of things on the iTunes store. how do i fix this?

    how do i make it so i can see my music again. it only shows songs i can buy and it shows songs that are related to music that i i already have on my iTunes library,but it will not show my library anymore.

    robcharlus wrote:
    The old iTunes libraries do not restore any playlists or song counts.
    They should you if you do the roll back properly... Opening files from the Previous iTunes Libraries folder in Windows Explorer simply opens the current library. If you don't see the .itl file extension then don't give your copied and renamed file the extention or iTunes will create an empty library rather than using the renamed file.
    If you had a complete pre-problem backup of your library you could restore that. On the assumption that isn't possible I have a script called ExportImport that could in principle be adjusted to save the relevant data from a backup of the library database and then reimport that data into the current library. See this thread for details.
    tt2

  • Only show top 2 records

    My report link to an Excel database, in my Excel, I have two columns, like:
    VP      Revenue
    A1     7
    A2     6
    A3     15
    A4     8
    A5     9
    how can I only display top 2 VPs and their revenue in my Crystal report, like
    VP           Revenue
    A3            15
    A5             9
    You think it's easy? it's easy in Excel but not in Crystal.
    hiccup

    you can do a top n sort where you select the number of records to display
    or you can sort by revenue descending
    then do a record count and supress the records based upon that.

  • Vertical Shape with a phrase only show's in first page!

    Hello!
    I'am designing a purchase order and customer dont have to use a pre-printed paper. I have a need to have a phrase in vertical in left side of all pages!
    I created a shape and put the phrase inside of shape.
    My problem is that the phrase only appears in the first page of my purchase order.
    Someone Have an idea how to solve this issue?
    Thanks in advance.

    Thanks. Hadn't seen the "Troubleshooting a CD-ROM or DVD-ROM Disc That Does Not Appear on the Desktop". I have reset the SMC and PRAM/NVRAM to no avail. One thing that's interesting is that it suggests: "Make sure the appropriate extensions are installed and active in the Extensions Manager. (Apple CD/DVD Driver, Foreign File Access, UDF Volume Access)."
    There is nothing in my Macintosh HD/Library/Extensions folder. Other than that I'm not sure what they mean by Extensions Manager -- perhaps it relates to an earlier OS version, maybe even System 9. Powerbooks are mentioned on that page, but not MacBooks or MacBook Pros.
    In any case, I notice that there is now a support option where you can submit a wider range of issues than before and have Apple call you back to discuss it. They are going to call me back tomorrow. Maybe that'll help get to the bottom of this.

Maybe you are looking for