BrowserLab times out/displays gray web page

Hi There,
I've used BrowserLab in the past without a hitch. I have been trying to use it for the past couple of days as follows:
I choose File > Preview in Browser > Adobe Browser Lab from the DW menu. I checked the Browser Lab panel and I am trying to view my offline files via Local/Network. BrowserLab does open in the browser (I've tried Chrome, Firefox and Safari, obviously I am working on a Mac). I can log in with my Adobe ID. So far everything seems fine. But then I get there and all I see is a grey page. There are menu items at the top of the page for choosing a language, establishing browser sets and reloading, but that's it. The main area of the page is nothing but gray. I tried to refresh and received an error message that no browser sets were selected. I tried to create a new browser set (I chose a few browsers and pressed the Add Browser Set button) but nothing seems to happen. I don't see any indication of a new set being created and when I try to refresh again I get the same error message about not establishing a browser set.
I tried going through the BrowserLab panel in DW but the same thing happened. In DW the panel displays an error message: Timed Out, failed to connect to BrowserLab (even though it seemed like I was basically seeing BrowserLab, just not able to use it).
The other thing that is weird--it almost seems as if for just a quick moment I can see that BrowserLab tries to display my page before it goes gray.
The offline file has been validated (HTML5 and CSS) and I can see in File > Check Page > Compatibility that there are no issues detected. So I'm fairly certain that I'm dealing with pretty clean code.
Finally, I did check for new updates and updated Dreamweaver to CS5.5 yesterday. But, I'm still having the same issues.
Any ideas?

one other thing to try these steps in the following sequence
make sure DW CS 5.5 is closed
launch BrowserLab standalone in the browser & login
then relaunch DW CS 5.5
please let us know if this works for you.

Similar Messages

  • Safari signs me out of a web page each time I open a new tab within a web page I am already signed in to

    How can I stop Safari from signing me out of a web page each time I open a new tab within a web page I am already signed in to?
    This is very annoying, how can I stop this??

    Extensions.
    1. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    2. Delete Cookies
        Safari > Preferences > Privacy > Cookies and other website data:
        Click “Remove All Website Data”.

  • Bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

    bought i phone 6 64 GB just 3 days before performance is very bad.Couldn't even open app store it takes too much time for opening a web page.

    You may need to reset your network settings, making sure the network you're accessing is stable: tap Settings > General > Reset > Reset Network Settings.
    If your iPhone still can't connect to App Store, tap Settings > iTunes & App Store > tap the Apple ID and sign out > later, sign in with your Apple ID.

  • "Internet Explorer Cannot Display the web Page

    on August 7th
    I purchased a brand new computer that has
    Vista Home premium on it,
    To date I have not been unable to open this program.
    I have been looking for help ever since,
    I have been all over the net, I have tried
    Lenovo sites.
    I tried to call Lenovo, unfortunately I got no help there,
    as I am deaf.
    I looked through this site, in the hope that someone
    who might have experienced this can help.
    The Welcome center comes up when I start the Computer.
    when I click on Internet explorer this is what I get.
    Internet Explorer Cannot Display the web Page"
    Most likely Causes:
    *You are not connected to the Internet.
    * The web site is encountering problems.
    * There might be a typing error in the address.
    "What can you try"
    'Diagnose Connection Problems"
    I did this and this is what I got.
    Windows did not find any problems with this
    Computer's network connection.
    I tried more suggestions, and got more of the same.
    I tried everything that looks promising, to no avail;
    Please help if you can, it would be much appreciated;
    Regards
    Victoria
    Lenovo 3000 H210 53552p desktop
    Vista home Priemium 64

    Victoria,
       There are a few reasons that the error may come up. The first thing that I need to ask is when you say "I have been all over the net, I have tried Lenovo sites.', is this on the new computer? (i.e.. You are able to browse the internet, but get the error every time you initially launch Internet Explorer)
      If so, the likely issue is that the particular web site that your home page is set too is invalid or is encountering problems.
    Dennis

  • IE browser and Web Cache and SSL - Internet Explorer cannot display the web page

    When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
    if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce.  The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
    Event_log shows below errors.
    [2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
    [2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
    [2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
    [2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
    [2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
    [2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
            /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
            /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ]  [[
    The following Oracle Web Cache internal files are pre-populated to the cache: [[
            /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
            /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
    [2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
    [2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
    [2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
    [2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
    [2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    [2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
    [2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
    Any help or suggestions are greatly appreciated
    Tnx a lot,
    Lokesh

    Hello ,
    Try Below Workarounds:
    Workaround 1:
    Open Central Admin
    àApplication Management  à
    Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
    Workaround 2:
    Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.  
    Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs .. 
    Best
    Regards Kuldeep Verma
    Please remember to click "Mark As Answer"
    if a post solves your problem or "Vote As Helpful" if it was useful.

  • How do you Configure the "Screen Body" of the GUI to Display a Web Page?

    From the first screen in the GUI, I'd like to pull in a live web page to fill the right side of the screen (where the big SAP data graphic sits, next to the left hand navigation).  How is this done?  I've seen the University of Nebraska's GUI and they successfully pull in the front page of their SAP Support Site.  We'd like to do the same.
    Again, we simply want to have that frame of the GUI in teh Screen Body section to display a web page pointed at an absolute URL. Advice?
    Thank you!
    Lee Dudley
    Multnomah County, Oregon

    Hi lee,
    this link should be helpful
    [http://www.synactive.com/tutor_e/lessonv01.html]

  • Can Spry display another web page within a detail region?

    I currently have a non-Spry enabled site I would like to add
    Spry to. Basically, it is a story/photo web site and I have
    separate pages created already for each photo "event" that includes
    text, pictures, etc. Right now I have a menu with all of the
    stories that the users clicks on and it takes them to that
    particular story. I also use templates to control a common look and
    feel and header, but basically, one web page per story (they are
    all similar, but varying # of pictures, paragraphs, etc.). It works
    fine, but it does reload the web page for every story.
    So, what I would like to do is have one region defined where
    I have a sorted list of "stories" with dates and brief descriptions
    and when a user clicks on one of the stories I would like it to
    display the web page I have already created in another
    region....kind of like message preview in Outlook. Anyway, I know
    it is easy enough to create an XML data set that defines the title
    of the story, date, etc., and I could even include a relative link
    of the actual web page story in the data set to define where the
    web page is. I guess my main question is, how would I display an
    entire web page inside the detail div "region"? I know if you just
    had a simple picture, it would look something like this: <img
    src="images/{@path}"><br/>Name:{@path}, but what tag could
    you use to pull in an entire web page to preview inside the detail
    div region?
    Thanks in advance!

    Well I don't know if this is exactly what you're looking for, but you can have a browser window pop up from an event in an applet. If you use something like:
    getAppletContext().showDocument(new URL(theUrl), "_blank");
    a new browser window will pop up with whatever URL you want.
    Hope that helps a little.
    -Sheepy.

  • Safari not displaying some web pages properly why?

    I have been finding of late that safari does not display certain web pages properly. i.e.: text overlaps other text  and is not formatted properly. This seems to have become more common lately. Even Apple's own apple info page does not display properly. Could this be a setting in safari that I have messed up somehow?

    Go step by step and test.
    1. Delete Cookies
        Safari > Preferences > Privacy > Cookies and other website data:
        Click the “Details” button.
        Remove all cookies except from Apple, your internet service provider and banks.
    2. Safari > Preferences > Extensions
        Turn off Extensions if any and launch Safari again to test.
        Turn on those one by one and test.
    3. Delete Caches.db
        Close all windows and quit all applications.
        Hold "option" key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Caches > com.apple.Safari > Caches.db
        Right click the Caches.db file and select "Move To Trash.
        Close windows and relaunch Safari.
    4. Empty Caches
        Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        Develop menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    5. Temporarily  turn off  Safari iCloud sync and test.
         System Preferences > iCloud
         Uncheck the box beside “Safari” and test.

  • Time-based publishing in Web Page Composer

    Hi,
    I'm evaluating Web Page Composer (WPC) for a customer and one of the requirements is time-based publishing for web pages and navigation, but I can’t find any information on that subject.
    Do you know if it’s possible to set up time-based publishing for WPC pages?
    Thanks
    Martin

    FYI.
    I contacted SAP about time-based publishing for WPC pages and unfortunately this feature is not implemented in current versions of WPC. My request has been added to the feature request list for future versions.
    Regards
    Martin

  • Permissions Issue with displaying WPC web page

    Hi All (and Eric Heilers!)
    I created and published a web page using web page composer. I added the web page to an iView and in turn the iView to a role. I assigned the role to myself and I was successfully able to see the Web Page....all was well.
    Next I created a new test user and assigned a bunch of roles to a user group (one of the roles contained the web page iview). The role doesn't render the web page inside of the iView for the test user. I have given the test user Read/Write and also resorted to giving the user Owner permissions in almost everything but still I cannot render the web page!! I have tried permission in Security Zones in page builder (no_safety, and medium_safety), i have tried in, Portal Content Directory and also tried adding the test user full control permission from within the Web Page Composer role at the web site owner level. Still nothing. At best I was able to render the little toolbar which contains 'Edit" and 'RSS Feed' options on the top right, but not the web page itself.
    Any helpful hints, suggestions, tips greatly welcome.
    Kind regards,
    Tony.

    Thanks for your reply Eric,
    So I'm just going to step thru this with you,
    Prerequisites:
    URL generator service -> I do not want to make the web pages externally accessible yet.
    MIME handler service -> Is active.
    Procedure
    1) CM Repository Manager (this is optional so I didnt do it)
    2) Folder Structure (Check)
    3) Global Entry Points (this is optional so I didnt do it)
    4) Configuring Entry Points for iViews (this is optional so I didnt do it)
    5) I have created iViews to display the Web Pages
    6) I have given relevant permission in security zones. (This is also where you advised me to do it for com.sap.nw.wpc -> wpc)
    7) Although optional I am using this strategy to create group for roles and iViews created in Step 5 above.
    8) I have assigned the relevant roles and group to users.
    9) I have defined permissions in the web content repository.
    10) I haven't configured search for web pages
    11) I haven't configured localisation for languages and regions.
    12) I haven't done any performance optimizing.
    Now, from this you can see why I feel like I have done all that is necessary so far.
    Any further suggestions?
    Also, is there a way to upload a html page to the Web Pages folder and just publish that instead of using the WPC layout? As I want to keep all the javascript and stylesheet information? *
    Kind regards,
    Tony.

  • Why does my IPAD 1, kick me out of a web page/site and return me to my home page?

    Why does my IPAD 1, kick me out of a web page/site and return me to my home page?

    Probably a glitch in Safari.
    Quit Safari - double tap the Home button to reveal the multi-tasking window at the bottom. Swipe sideqays until you see the Safari icon. Tpa-and-hold until the red circle/hwite bar appears, then tap that to close Safari. You might do that with all the icons to be sure.
    Tap the Home button to close multi-tasking.
    Restart the device (hold Home and Sleep for around 10 seconds untl the Apple logo appears).
    Fingers crosed, that'll fix it

  • I have used fire fox for a long time but have nothing but problems loading web sites..i think the time has come to uninstall firefox and go with internet explore..im tired of wasting my time trying to load web pages.

    Question
    i have used fire fox for a long time but have nothing but problems loading web sites..i think the time has come to uninstall firefox and go with internet explore..im tired of wasting my time trying to load web pages.

    does not solve problem..guess i'll have to get rid of firefox..never had problen before but to much hassle loading web sites.

  • 4.0b4 will not display any web pages in Mac ox 10.6.4 - now solved, see beow

    Firefox stopped displaying web pages. No address bar, status bar, nothing. The pages I try to load appear under the "windows" menu, but the "minimize" and zoom controls are grayed out.
    I downloaded and reinstalled 4.0b4, but this did not help. "internal" windows like bookmark listings or downloads show fine.

    I found the problem: poor recognition of multiple screen settings. I typically use a MacBook Pro with an auxiliary monitor so that I have two screens active. The problem occurred when I was not connected to the secondary screen. Apparently Firefox was setting the new windows up on the non-existant screen. One part of the program recognized that the windows were not visible, but that information was not properly conveyed to the function that decided where in the desktop space to place new, active windows.
    Restarting the MacBook had no impact on resolving the problem, but connecting the second monitor did.

  • HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

    I have Mac 10.8.4 with Safari 6.0.5.
    Safari is not displaying the web content but images on the web page are being displayed.
    Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
    I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
    When I open Preferences of Safari & click on Security tab, It Crashes!!
    Thanks,
    Shubhi

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Session time out in a web application

    Hi,
    I am making a struts based web application. For session time out validation I have made an entry in the web.xml file as <session-config>
              <session-timeout>1</session-timeout>
         </session-config>
    In case the user's session time out occurs then he should be directed back to the log in page.
    Can any one tell me how to proceed in this case and what are the best practices.
    thanks

    Hi
    I've tested it with OC4J and it works both ways.
    I do think that you must have the
    <session-config> tag present though for the setMax... method to
    work, observe that this method is for seconds and not millisecond
    regards
    //Mike
    Hi all,
    I try to manage by my application the http session time-out.
    Change it in a web.xml works fine , but if in my servlet i try
    to change it using setMaxInactiveInterval(MILLISECOND) the result
    is that the session became invalidate after few seconds instead
    50 minutes ad example ....
    Answer ????
    thks
    Carlo Mossa

Maybe you are looking for

  • FFT Amplitude into Sound Pressure Level (SPL)

    Hi everyone, I have a problem with my program. Basically, i have a chirp signal to be outputted into my DAQ and being fed to my speaker. The microphone will sense anything coming out from the speaker, and acquire it using my DAQ. I want to display a

  • How to configure LOCA (o/p Device)

    Hi Freinds, Whenever i execute T code SPAD and press F4 in output device it show only one o/p device. But we want to configure LOCA o/p device. Can you help me how to configure it. Thanks, Rd, Sachin

  • Error when Adding a BW Attribute to WebI

    I created an universe based on a BEx query. The Query/Universe contains about 10 Characteristics. When I run the query only with characteristics it work fine. When I choose attributes from one characterstic I am getting an error "Error at MDDataSetBW

  • Premiere Pro problème de conversion

    Bonjours a tous, alors je vous explique mon problème, j'aimerai ajouter dans un montage vidéo GoPro (1920/1080p 29i/s) réaliser sur premiere pro, un slowmotion d'une vidéo (1920/1080p 47i/s) que j'ai fais a l'aide de Twixtor lorsque je le réalise dir

  • Problems with Mail since loading "Maverick"

    Mail keeps asking me for my password, also I noticed that in Mail / Preference on iCloud Account, the password is empty. When I type my normal password and save it, and then return to Accounts the password has not been saved and is blank again. I ass