Browsers Hang While Loading

In both Safari and Firefox, a loading window will occasionally hang and not return the page or take a long time to load. I've emptied the cache, cleared the history, reset the browsers, uninstalled Flash, etc. While a hung window continues to load, I am able to open a second window and navigate the web with no problems. Any ideas? Thanks!

Are you connecting wirelessly?
Are you connecting via any USB devices?
What network hardware do you have?'
If wireless are you encrypted with WPA2, and using at least 802.11g, or 802.11n, or do you have to use 802.11b or WEP for any reason?

Similar Messages

Windows 7 install hangs while loading

Been trying to install Windows 7 64 to my MBP through Boot Camp, but it hangs when loading files from the DVD. It'll get through the progress bar saying "Windows is loading files..." but then stops after that.
Any ideas on what to do?

One of the reasons Windows 7 might have trouble, is where you are forced to delete and create NTFS out of the FAT/MSDOS partition that BCA creates.
Second, Windows 7 may assume that one of the 128MB or 200MB partitions on there (EFI at the end of each HFS volume and GPT head) look like FAT; Windows 7 creates a 100MB System Recovery partition. It may try to use those instead of taking it from the BOOTCAMP partition.
XP discs could vary and some versions would wipe out Mac OS, not even ask for where to put Windows, for no rhyme or reason, even XP SP3. Of course that means having a backup is doubly important.
Windows 7 64-bit is only "officially" support on some Macs, which doesn't mean it can't or won't, only that may have extra steps, may get an extra "Select 1 or 2" option due to its own EFI menu on Windows DVD.

Firefox hangs while loading pages.

When loading a new page (not always in a new tab, not always an additional tab or tabs, but it seems to happen more when opening multiple tabs) the little rotating circle will either remain dark and if an attempt is made to reload the location bar changes to new tab, losing the address in the location bar, or the rotating circle will go one way, then reverse, then continue to spin. At the bottom of the page where what is being loaded in a page shows it will hit on one thing (as I'm writing this in Chrome I'm loading a folder of bookmarks I've been loading daily for years that now is a nightmare and pages are stuck at "connected to ajax.googleapis.com," "connected to hell.myfonts.net," "waiting for dt.adsafeproteted.com," "connected to log.pinterest.com," "connected to cdn.syndication.twimg.com," "waiting for api.lanistaads.com," "waiting for www.projectwonderful.com," "transferring data from v4.moatads.com," "waiting for aax.amazon-adsystem.com," "connected to aax.amazon-adsystem.com," and the other three pages are stuck trying resolve the actual URL) and then refuse to go any further. After that the page will sit, unchanging, as best as I can tell forever. I've left a page loading for several hours while working and it was still connecting to googleanalytics when I came back. It does the same in safe mode. Not a single page in the book marked folder is loading, NOT ONE. They're all sitting and spinning either with blank pages or partially loaded. I will reiterate before someone suggests I not load so many pages at once that I've been loading this particular folder full of pages for at least five years and probably longer and it did not do this until the last month.
This has been going on for a while and has made Firefox worthless. It is getting worse. I have read every similar question and none of the answers has made a bit of difference.
I have tried safe mode.
I have refreshed Firefox.
I have uninstalled Firefox and installed the latest version.
I have cleaned my registry.
I have cleaned my cache (which was almost empty anyway).
I have deleted all temporary files that were not in use on my computer.
I have deleted the install folder in Programs(x86) and then reinstalled the latest version (this made everything even worse and resulted in no secured connections being available at all, including mozilla.org giving me not safe connection warnings so now Firefox is even less useful than before) and currently have no add-ons or themes installed.
I have run Spybot, Malwarebytes, Housecall, and several rootkit detectors with no luck.
This computer is less than a year old, is running Windows 8.1 and is up to date. I just installed Firefox v 37.0. When I went to look and see what the version was Firefox can't even seem to resolve its own update URL.
Application Basics
Name: Firefox
Version: 37.0
User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:37.0) Gecko/20100101 Firefox/37.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
Report ID: bp-c4fb0dcb-300b-499f-9604-ff2202150402
Submitted: 1 day ago
All Crash Reports
Extensions
Graphics
Adapter Description: Intel(R) HD Graphics
Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
Adapter RAM: Unknown
Device ID: 0x0156
Direct2D Enabled: true
DirectWrite Enabled: true (6.3.9600.17111)
Driver Date: 9-16-2013
Driver Version: 10.18.10.3308
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 11 (OMTC)
Subsys ID: 00000000
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D11 vs_5_0 ps_5_0)
windowLayerManagerRemote: true
AzureCanvasBackend: direct2d 1.1
AzureContentBackend: direct2d 1.1
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20150326190726
browser.startup.homepage: http://forecast.weather.gov/MapClick.php?lat=38.24457956399675&lon=-85.76285815797684&site=all&smap=1#.VR8Tv-H0d-8
browser.startup.homepage_override.buildID: 20150326190726
browser.startup.homepage_override.mstone: 37.0
browser.tabs.warnOnOpen: false
dom.mozApps.used: true
extensions.lastAppVersion: 37.0
gfx.direct2d.disabled: true
gfx.direct3d.last_used_feature_level_idx: 0
layers.acceleration.disabled: true
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1428101019
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1428101009
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.8
Version in use: 4.10.8
NSS
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSSMIME
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSSSL
Expected minimum version: 3.17.4 Basic ECC
Version in use: 3.17.4 Basic ECC
NSSUTIL
Expected minimum version: 3.17.4
Version in use: 3.17.4
Experimental Features
---------------------

I get an e-mail with go-comics and the ones I want to post links to I'll open in the browser as I read them in the e-mail so I regularly have a dozen tabs open (all the same site) by the time I'm through the e-mail. Every third or fourth page will hang up on something (connecting to or waiting for) sometimes not loading a single image, sometimes loading half the page, sometimes loading everything but the comic (because, hey, why put that as the first thing to load when you've got all these ads and crap to throw at your paying customers?).
At some point a couple of months ago I got some malware associated with trovisearch (I do not know how that got past security and java blocker but it did, probably some hidden crap in something from CNET) that somehow spoofed a page for Housecall and added five or six pieces of malware and adware. I cleaned for two days after and still can't find anything left on the computer even though I've been running scans constantly to try to make Firefox work right. I downloaded and ran a scan using Kaspersky during that time and then uninstalled it. That very well may be the cause of the post-refresh SSL issue.
I have Spybot and Malwarebytes scan logs from the time of the infection if that would help in any way. It doesn't look like there's a way to attach .xml files in this forum, though.
I can also run hijack this and copy and paste if that would help.
I'm currently running Windows Defender and rely on that and Noscript and adblocker plus to keep me isolated from most attacks (I don't have those add-ons re-installed yet). I also run Peerblock because they add malicious sites and known hacking sources (like Chinanet) to what they block as well as all the fake p2p stuff that's constantly pinging the computer. If I'm treading around in perilous waters I run Sandboxie.
Chrome is working as normal but Firefox feels like dial-up or worse right now and without adblocker I might as well be using IE.

Logic Pro 8 hangs while loading EXS instruments/reverb...

Recently, I encountered a strange problem with logic pro 8: After saving with assets (copy external audio files to project folder), logic hangs every time I load an apple software instrument (i.e. EXS, sculptor) or apple reverb (i.e. space designer). The instruments will load and I'll be able to even get sounds from them, but soon the spinning multi-colored logo appears and logic hangs. Interestingly, after I choose to save the same project as without assets, the problem disappears. Any ideas?

Yeah I too have unfortunately been having it since about the time logic 9 came out :-/ i would greatly appreciate help as I've reinstalled logic, rebooted logic, deleted preferences and still it has trouble with the instrument load times. I also can hear and even play an instrument but have absolutely no access to logic while the circle spins. any help would be appreciated

Web Browsers hang when loading pages

Hi!
On my early 2011 Macbook Pro webpages take forever to load, and somthimes dont load at all. This happens with all browsers, in safari the blue progress bar stops at the first interval and sits there for a LONG time until it goes on, in Chrome it is hung on " Sending Request " . This does not happen on all webpages, it is random.
If anyone could help that would be great!

Ive fixed the problem. Just go into Chrome preferences > Under the hood and uncheck " Predict network actions to improve page load performance" this fixes the problem. Thanks for your help and I hope that this can help other people with this problem.

Audigy2 SB1394 hangs while load

I have had this product for a couple years. Always worked great! All of a sudden when my computer starts up, it sounds like it half-loads & the Creative logo freezes on the screen. I have downloaded drivers EAX4DRV and SBA2_PCW, uninstalled SB per your instructions, reinstalled, and the result is the same with the logo freeze. What's left to do?

For the code you show you do not identify the xml file to be loaded, which based on that code should be in the req variable...
var req:URLRequest = new URLRequest("yourfile.xml");

V8.2.1: generic file i/o error while loading VI's

Hello,
I had a large LV application open and running fine. I closed it, and upon re-opening the top-level VI it gives "Generic File I/O Error" on several sub-VI's (belonging to me, not LV). Opening those sub VI's individually reveals no problem at all, and in any case the whole code base lives in a Subversion repository and I have tried checking out a fresh copy of the whole source code tree and the problem re-appeared. Before Labview displays the "File I/O error" it will hang for several minutes with no disk or CPU activity.
I just tried checking out a fresh copy of the source tree on a separate computer. Now Labview is hanging while loading "<vilib>:\DAQmx\create\channels.llb\DAQmx Create Channel (CI-GPS Timestamp).vi" after having managed to load 920 VI's. On edit: I spoke too soon. It is now duplicating the "Generic File I/O Error" on one of my sub VI's.
If anyone has any clue to this strange behavior please let me know.
Thank you,
-Brian
Message Edited by brian_g on 04-08-2008 11:43 AM
Message Edited by brian_g on 04-08-2008 11:44 AM

What I found was this...
My code calls a bunch of subVI's in another directory. Those subVI's in turn had some unwise paths saved in some of them that loaded other subVI's from a network shared drive instead of the local disk directory.
The network shared drive had been taken off line since the computer was delivered to a customer last Friday. When LV tried to load the VI's from the shared drive, it would hang for about 5 minutes, then give the "Generic File I/O Error" with an "Ok" button to continue. I eventually sat and did this for about 13 VI's, taking most of an hour while waiting for the network reads to timeout.
Once my now-broken application loaded I was able to successfully re-direct the missing VI's to the local disk, resolving the problem.
The "Generic File I/O Error" message could not be less useful in this case and I'm rather irritated by the genericity of the message. Something like "Network read failed" would have immediately illustrated the problem and kept me from wasting a whole lot of time deciphering it.

Premier elements 10 hangs when loading on importingquicktime.prm

I am unable to use Premier elements 10 because it hangs while loading "importingquicktime.prm". It then goes back to the opening menu. Organizer works fine as does Photoshop, which was bought as a complete pack. I have the latest version of quicktime 7.7.1. I have checked my laptop and it has easily enough spec to cope with the programme.
I have been onto Adobe customer Support. Their technicians seems totally unaware of the probelm and seem to find it hard to grasp what is happening. They keep asking what error message comes up. There IS NO error message.
They got me to turn of all other programmes including the antivirus and to set up a new catologue in Organizer. Still the same problem.
I have spent so long on the phone to them that I will need a bank loan to pay for the phone bill. On two seperate occasions they have agreed to phone me back sometime during that day. Both times they failed to do so. It seems that they have a department called customer service and service is the last thing they want to offer.
I am surprised that Adobe seem not to know there is a problem as there has been a number of posts on this forum on the same subject.

For a quicker response, I'd suggest that you post your query on the Premiere Elements forum http://forums.adobe.com/community/premiere_elements

WebDynpro ESS content pages with ECC6 backend blank while loading (hanging)

Hello all.
I am implementing ESS on a newly installed NetWeaver 2004s SP10 Java Server with portal and existing ERP2005 / ECC6 backend.
Whenever it comes to the concrete pages, e.g. own address or WhoIsWho, the pages remain blank while loading. The "progress bar" in the Browser status frame moves forward a bit and then seems to hang.
I know this issue was asked in some other threads but I couldn't find the concrete ansewer to my situation.
My steps:
1) Deployment: XSS (PCUI_GP) 07, ESS 07, ESS BP 07, all last SP
2) Portal systems as mentioned in ESS docu: I configured all system parameters but the connection tests fail for the J2EE and the "R/3" system, is that a problem?
3) JCO definition: all tests successfull, even SSO.
4) ECC6: demo users linked to employees, given the neccessary(?) permissions (mainly ESS role profiles and S_Service authorization as I found that in another thread)
5) Portal / PCD permissions for the ESS user: on the ESS root folder, on the systems and even on the "Content prov. by SAP" folder, where I don't want them...
What I missed regarding some other posts:
I did not configure the portal content in the IMG of the backend under Personal Management->ESS. Do I have to?
There are some Service Keys predefined but not all like in the ESS docu, e.g. the one for WHOSWHO is not there like spelled in the docu. Do I have to define it?
If so, what are the correct keys and parametets, since I can't find it in the ESS docu.
Please can someone give me a complete example for one application function with the Service Key and all service parameters like path, object, pcd url?
On top of each application section in the ESS docu is a technical description. Are these the entries for service definition? But not all fields are matching, an example which data belongs to which field in the service definition would be helpfull.
Or did I miss something else?
Where are the log files located to find additional info (I'm relatively new...)
Thanks in advance
Carsten

Thanks for the tool, Darren. I may try it in future.
I solved it:
After setting up some general permissions of the Portal-Content folders in reference to a Portal post-install guide, the "Everyone" default group was missing on the ESS content folder because the permissions were not inherited any more.
I added "ESS role" permissions before but not "Everyone" group. I guess "Everyone" is needed for some general content included in the iviews. After adding "Everyone" with eu-role to ESS content folder (and srvcfg) it worked.
Regards,
Carsten

Error while loading shared libraries: /usr/lib/libwebkitgtk-1.0.so.0

So, I have a sligtly old computer that I use web browsers like midori on, because they are good for slow computers. Whenever I launch dwb or midori or luakit from the launcher in the Gnome shell, nothing happends. When launching from the terminal (dwb here, it happens for all three) I get:
dwb: error while loading shared libraries: /usr/lib/libwebkitgtk-1.0.so.0: file too short
and when installing packages I get:
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0.16.10 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4.3 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0.22.8 is empty, not checked.
ldconfig: File /usr/lib/libjavascriptcoregtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so is empty, not checked.
ldconfig: File /usr/lib/libxvidcore.so.4 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so.0.0.0 is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so.0 is empty, not checked.
ldconfig: File /usr/lib/libtotem.so is empty, not checked.
ldconfig: File /usr/lib/libwebkitgtk-1.0.so is empty, not checked.
The package installs, and then this prints out.
What can I do to fix it?
Note: this happened after a system update
Last edited by dubble (2014-06-04 20:42:09)

Alright, I read the thread and preformed
sudo pacman -Syyf <all packages updated>
but the option wasn't found (-f)
so i did
sudo pacman -Syyu <all packages updated>
and it spit out several hundered lines consisting of:
webkitgtk2: /usr/share/webkitgtk-1.0/images/panIcon.png exists in filesystem
except with different packages and files
help?

Error while loading the multiple instance of Acrobat

Dear all,
     While loading multiple instances of an acrobat application I get an error message stating that:
          "The organizer database is damaged and will be reset the next time Acrobat is launched.
           Quit the Application and close any currently opened browsers."
     Can anyone tell me the reason why this occurs, the version of the acrobat is 8.0 (it is a licencedVersion).
Note: The Snapshot of the image is attached for further reference.
Regard's
Amith Sai

Dear brennao,
          Thank you for your reply, I followed the same procedure which you have mentioned in your reply, but still am facing the same problem is ther any other work around which would help me suppress this error.
plzzzzzzzzz reply...
Regard's
Amith Sai

Issue while loading Master Data through Process Chain in Production

Hi All,
We are getting an error in Process chain while loading Master Data
Non-updated Idocs found in Source System
Diagnosis
IDocs were found in the ALE inbox for Source System that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
Regards
Bhanumathi

Hi
This problem is not related to Process chain..
u can try this..
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
(from JituK)
Hope it helps
Darshan

After syncing Firefox with my Android phone, Google calendar is not functional. It hangs on "Loading" and will not allow updates or edits. Calendar works in IE, just not Firefox on any computer. Clearing cookies and cache no help.

I synced Firefox with my Droid Razr Maxx Firefox. Now Google Calendar hangs on "Loading" and will not function. Clearing cache and cookies does not help. Works the same on any computer Firefox. But Gmail works fine and Calendar is okay under other browsers.

Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Firefox does not run smooth while loading websites.

Firefox does not work smoothly when it is loading any webpage. Specially, when I open new tabs and load new websites while it is still loading last website in other tab, the situation becomes worse. Main problems that occur are - page will not scroll, or scrolling hangs for a sec or so, works a little bit and it happens repeatedly, new tabs will open but not smoothly, website loading also gets affected in similar way. The dot that revolves on tabs while loading any webpage gets really annoying. It revolves intermittently. Imagine a car engine not starting, it starts, stops, starts, stops. That's what happens with Firefox. But once all webpages are completely loaded and scrolled 2 or 3 times from top to bottom of the page, then it is all good. All the problems occur when page is still loading in fore- or background in any or all of the tabs. I tried to run Firefox with all add-on and plugins disabled, tried to refresh Firefox from troubleshoot information. But nothing helps. I even uninstalled and reinstalled Firefox. I guess my laptop is not having memory issues. I am using Windows 7 x64 based system. RAM is 4 GB. All other software work well. Most importantly, Chrome has no such issues in comparison to Firefox. Also, when IDM (internet download manager) takes over some downloads, the Firefox hangs for few seconds. Please help.
Thank you.

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window

Hang while installing OS X Mavericks

Hi, my MacBook Air is currently hanging while installing OS X Mavericks. I got stuck after the installer asked me about my iCloud account, which I forgot, so I clicked 'Forgot Password'. It's been showing a gray loading screen ever since. I tried to restart it a couple of times but it won't, and my laptop won't even shut down. I close my computer and then the startup comes up again, I put in password, but it's the same gray loading screen.
I'd like to reload the installation, or at least get to access my computer files. What do I do? Any help is appreciated. Thanks.

Nevermind! It managed to shut down after a while. Whew!

Browsers Hang While Loading

Similar Messages

Maybe you are looking for