Browsing doesn't connect even with 5 bars

My iPhone 3G here in the UK often can't connect to the internet and even when their are five bars of reception. Anyone know what's going on?

J23,
In addition to making sure you do have a data connection (via 3G or EDGE) another good troubleshooting step to try would be to reset network settings as well as making sure your iPhone software is up to date using iTunes. To reset network settings, navigate to Settings > General > Reset on your iPhone.
If that doesn't resolve the issue, you may want to contact your wireless carrier in regards to the situation.
Hope this helps,
Raleigh

Similar Messages

HT4199 this still didn't fix iPad connectivity after updating to iOS 6.0.1 !!! intermittent wi-fi connection, even with a direct line-of-sight to the router.

"HT4199: iOS and OS X: Recommended settings for Wi-Fi routers and access points"
this still didn't fix iPad connectivity after updating to iOS 6.0.1 !!! intermittent wi-fi connection, even with a direct line-of-sight to the router.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT1386 I hook up my ipod to itunes and I click on it but it doesn't come up with the bar on the top so what do I do to put music on it from my computer? pleas help!!

Pleas help i want to download music from my computer but when i hook up my ipod it doesn't come up with the bar were i can do thatb so what do i do to download music!?!?

If your device is not recognized in iTunes, try these suggestions:
iOS: Device not recognized in iTunes for Windows
Also try to connect in recovery mode, to set it up as new device and start again:
How to back up your data and set up as a new device

Itunes cannot connect even with wifi on? help?

Itunes cannot connect even with wifi on. Any ideas? I have reset wifi connection and that didn't work.

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Ipod Touch 5G- WiFi is very slow or won't work, even with 3 bars and stood next to the hub. Is there a problem with iOS 6.0.1? Any one know a way to fix it?

Even with 3 signal bars on a 11mb/s connection. It takes more then 3 mintues to load Google fully!
It works fine loading one page then goes back to being slow or no excitant. It seems to start working again after using speed test.
At first i thought it was the case but after removing it there was no difference
I have tried every thing i could think like:
1. Turing it off and on again
2. A complete restore and backup. (Done this about 3 times)
I'm not sure if the new iOS 6.0.1 up date has caused this as it seemed to work fine for about a week after.
Any help would be appreciated!

I have same problem:
I saw another topic on this but it was a couple of months old. Last month I purchased a ipod touch 5g. It runs great except the speedtest tops out at about .3 mbps down and 5 mbps up. I don't understand what is going on. All my other wifi: Macs, ipod touch 4, ipad 2 & 3, etc work fine and get great speed of 9-15 mbps down and 5 mbps up. I can barely watch an Amazon video. Sometimes it goes fast but that is few and far between. I have tried resetting the network on it. I adusted my router for all the recomendations by Apple.
It was suggested to remove the security on the router just to test it. I did that but it made no difference. This happens whether I'm close (10' or less) or farther away. Is there something I'm missing or do I need to return it?
I keep seeing something about iOS 6.0.2 but my iPod Touch says I'm up to date at 6.0.1
thanks,
Bryce

AirPlay Mirroring doesn't work even with the specified hardware/software

Hello,
I have a late 2011 (OS X 10.7.5) MBP and a Sep 2012 Apple TV (MD199LL/A) with the updated software 5.1.
AirPlay Mirror icon doesn't appear in the menu bar.
No options/icons or texts related to AirPlay mirroring in System Preferences > Displays either. Checked detect displays, still no.
Updated all the software in both the MBP and the Apple TV on Oct 6th 2012 late evening/night and restarted both a couple of times, still no signs of AirPlay Mirror icon or option.
BTW, AirPlay works with iTunes, so I can hear music from MBP on my TV.
AirPlay Mirroring works with the latest iPad (as of Sep 2012) as well.
I think one or two people have reported this issue on the forum in response to some question/discussion. Thought it deserved starting a new topic in case some Apple folks are listening.
Perhaps their adverstising or guidelines need an update to remove references of AirPlay mirroring working with 2011 or newer MBPs. Perhaps they meant 2012 or newer?

pthompson63
To be honest I use mine mainly near power and juice up when I can so I don't test the battery too heavily, so I haven't noticed but would probably not.
If mirror is the only thing you want to do but don't want ML look at third party apps such as airparrot or reflectorapp (I hvae used airparrot and found it OK).
Jules

My laptop can't connect to the internet, even with 5 bars.

My laptop can't connect the internet through my WRT54G router. It detects it, it has 5 green bars, and I'm right next to the router but it doesn't want to go on the internet. All my wires are plugged in. I just don't know what to do...Please help.

Connect your Laptop hard wired to the router and check if you have Internet...If you don't have Internet, it means your router is not configured and you need to configure the router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
If you have Internet Access on your Laptop when it is hard wired, then click start and goto the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.
Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
Now it will give you the opportunity to put the network/wep key, make sure you enter the correct network key and confirm it...
It will connect...
If the above fails click on the Start button >>> Settings >>> Control Panel >>>Network
Connections- Right click on the icon for Wireless network connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select Obtain IP Address Automatically...See if you have Internet Access...
If all the above fails, then, click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway and post the results...

Sometimes lose connection even though wireless bar is full

I have Mountain Lion on my macbook and i have had a clean install. Even though i have couple of problems. My most iportant one is, connection problem.
Sometmes after 3 hours, sometimes after 2 hours i lose my connection to internet, but the wireless bar still looks full. Temporariy solution of this problem for me is just closing and opening the wireless. After that it works perfectly. But this happens all the time. Somestimes my download is interrupted and i have to download all over again. Can someone help me with this problem please?

None of these two worked for me. Yesterday wireless worked fine but today after using the macbook for half hour my connection was lost but wifi bar was still full.
Also i tried to forget my router's connection from my macbook but it ddin't do that. I opened the keychain menu but there were no network password to delete.
İ think i also made a stupid comment about my problem. I'm new to mac system and i thought airport is kind of a software. But it seems that it's a hardware. So there can't be any problem with it. I thought airport utility will recognize my router (any brand it is) and can do some modification on it.

Mountain Lion Email doesn't work even with 10.8.1 update!

My mail application completely failed shortly after the upgrade to Mountain Lion. None of the user advice has repaired it from these forums, so I have now resigned myself to using my ipad and iphone to conduct all my business emails. I was hopeful that this first 10.8.1 update from Apple would restore the my mail application. I can frustratingly report that no, it certainly hasn't. No change in fact. I click on the mail app and the beachball of death continues for about 5 minutes then it comes up with a message 'there is a problem with your mailboxes' with the option to quit or quit and rebuild index. If I choose that latter, the beachball resumes it's rotation forever or until I hard reset the machine as all other programs crash at this point. Apple, please help FAST, this is no way to run a business!!!!

Agreed, but I think that for most Mail seems to be working fine. There don't seem to many posts complaining about Mail problems - well no more than usual.
Have you tried a Safe Boot which sometimes helps in solving odd problems. and if that doesn't help, re-installing the OS using the Recovery HD?
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US
For a Safe Boot restart holding down the shift key until you see a grey progress bar. Once booted restart as normal from the Apple menu.

No connections even with 3G

Actually in a place where there is no wifi. I am able to use internet with my mobil. Infortunatly spotify connection doesn't work, asking for an internet connection! Any clue?

Try turning Airplane Mode On/Off
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Try Reset Network Settings
Try a new SIM card

Why does firefox "close" when I close the window but the process doesn't shutdown even with the upgrades since problem was reported.since i had updated to FF25

Frequently after I have been viewing numerous sites on firefox, when I close down the last window and try to reopen firefox, I am told that the program is already running and needs to be shut down. Using Task Manager is not useful, since task manager doesn't show the program as up and running. The only way to get the program to close so it can be used for a different subject is to reboot the computer. This is happening 10 - 12 times a week now, and gradually getting worse. This closes out everything I have open, making it necessary to save all opened files BEFORE I reboot, and then going back to reopen all of them. None of the other questions I've seem point to this particular quirk in the problem.

This is not a cure but will make it easier if Firefox locks up.
'''https://support.mozilla.org/questions/997866''' {web link}
From what I have been reading from other posts on this forum, the
issue may be caused by the clear history settings. It was suppose
to have been fixed in v30.
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy'''.
The button next to '''History''', select '''Use Custom Settings'''.
At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
'''Form And Search History''' leaving the others off.

Euro-sign (and Greek) doesn't work even with nchar/nvarchar2

This is something that has been blocking me for a few days now, and I'm running out of ideas.
Basically, the problem can be summarised as follows:
declare
    text nvarchar2(100) := 'Make €€€ fast!';
begin
dbms_output.put_line( text );
end;And the output (both in SQL Developer and Toad) is:
Make ¿¿¿ fast!See, I was under the impression that by using nchar and nvarchar2, you avoid the problems you get with character sets. What I need this for is to check (in PL/SQL) what the length of a string is in 7-bit units when converted to the GSM 03.38 character set. In that character set, there are 128 characters: mostly Latin characters, a couple of Greek characters that differ from the Latin ones, and some Scandinavian glyphs.
Some 10 other characters, including square brackets and the euro sign, are escaped and take two 7-bit units. So, the above message takes 17 7-bit spaces.
However, if I make a PL/SQL function that defines an nvarchar2(128) with the 128 standard characters and another nvarchar2(10) for the extended characters like the euro sign (the ones that take two 7-bit units), and I do an instr() for each character in the source string, the euro sign gets converted to an upside-down question mark, and because the delta (the first Greek character in the GSM 03.38 character set) also becomes an upside-down question mark, the function thinks that the euro sign is in fact a delta, and so assigns a length of 1.
To try to solve it, I created a table with an nchar(1) for the character and a smallint for the number of units it occupies. The characters are entered correctly, and show as euro signs and Greek letters, but as soon as I do a query, I get the same problem again. The code for the function is below:
function get_gsm_0338_length(
    text_content in nvarchar2
) return integer
as
    v_offset integer;
    v_length integer := 0;
    v_char nchar(1);
begin
    for i in 1..length(text_content)
    loop
      v_char := substr( text_content, i, 1 );
      select l
      into v_offset
      from gsm_0338_charset
      where ch = v_char;
      v_length := v_length + v_offset;
    end loop;
    return v_length;
    exception
      when no_data_found then
        return length(text_content) * 2;
end get_gsm_0338_length;Does anybody have any idea how I can get this to work properly?
Thanks,
- Peter

Well, the person there used a varchar2, whereas I'm using an nvarchar2. I understand that you need the right codepage and such between the client and the database if you use varchar2, which is exactly the reason why I used the nvarchar2.
However, if I call the function from /Java/, it does work (I found out just now). But this doesn't explain why SQL Developer and Toad are being difficult, and I'm afraid that, because this function is part of a much bigger application, I'll run into the same problem.
- Peter

PDF Initial Browser doesn't open PDF with Bookmarks as initial view - Problem (Help)

I've saved a PDF with Initial view of Bookmarks panel and
page opn my client and it opens with the bookmarks. I publish the
file from my PC via Contribute and open it with my browser and it
opens in the pages view. NOTE: when i open the PDF in Contribute,
it opens with no special view.....

Hey Jacksoup --
I don't believe this is a "Contribute" issue at all. I'm having the same problem with a .PDF of my own that I've published to the Web and I'm not using that software.
I had one original .pdf file that had no bookmarks. Bookmarks were then added to the doc and resaved. On the new version I have the document's file properties set to open bookmarks on initial view. The document opens fine locally on my computer, but when I publish to the web (not using contribute), and then try to open the .pdf via hyperlink it opens in MSIE and the bookmarks do not appear on initial view. It's driving me crazy.
I'm wondering if this is some sort of adobe cache issue? Where it's opening the document like the original? Or if it's something to do with MSIE? I have already cleared my browser cache and I also updated my adobe acrobat preferences to NOT restore last view settings when opening documents.
I have tried adding #pagemode=Bookmarks to the end of the URL to the doc...
Everything I've read and researched on line tells me I have done all I can do. Are we just $#!+ out of luck here or what's the deal Adobe?
Thank you for your time!

Can I stay connected even with the laptop closed?

Is it possible to close the top of the laptop, but still stay connected to the internet? If so, how?
Thank you!

This should explain it.
Apple: How to use your PowerBook G4, MacBook or MacBook Pro with the display closed and a Bluetooth keyboard or mouse
Apple: How to use your PowerBook G4, MacBook Pro or MacBook with the display closed

Long history of mail working well in variety of places, failure to send or receive mail even with 3 bars in CA

I've been using my phone for mail for years. It has worked well, even when I had no access to wireless service (albeit slower). On trip to CA in Berkeley it has stopped sending or receiving emails on any of my three mail accounts. Checked the settings and all seem reasonable. I'm getting 3 bars here (surprised so few in major CA city).

Hello there, rbspid.
The following Knowledge Base article provides some practical steps for troubleshooting Mail on your iOS device:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

Browsing doesn't connect even with 5 bars

Similar Messages

Maybe you are looking for