Browsing ms-word document directly from portal content window.

Hi,
I must make ms-word document directly browsing from portal content window.
Is there a blog mention about it?
Thanks.

First, thanks for your reply. It's greatly appreciated. However, the level of your response fails to address the scope of the original question. Your first supposition is incorrect, that most MS Word docs copy uneventfully into the body of Gmail emails. This only applies to the most basic of MS Word docs (i.e., those utilizing minimal formatting, such as basic letters, etc.) and otherwise runs contrary to dozens of online complaints posted by users such as myself (though not on the Firefox website). Second, everyone knows you can add an attachment to Gmail emails. In this case, the recipient will not accept attachments of any kind, and has therefore asked that the content be copied directly into the email body. This is not uncommon in these cases. Third, the very nature of Notepad makes it unable to translate/interpret any documents beyond the most basic, hence its name: Notepad. Fourth, apparently this problem is rare or virtually non existent with other browsers, as all the complaints online appear to be Firefox related. Again, however, I appreciate you taking a stab at this.

Similar Messages

Words documents opened from portal display website instead of document

A user is opening Word documents from a newly-created section of our portal to find that the Word document displays the website instead of the text that is supposed to be in the document. Saving the document first and then opening it works fine.
It seems similar to this issue:
WWC-41400 when accessing PowerPoint docs
with the following key differences:
1. It doesn't actually display an error. The screen that appears in the Word document looks somewhat like our login screen, but without the login text.
2. This problem only started happening after we redid a section of our website. The new section contains the same documents, but it was rebuilt on the top level of our navigation rather than where it was before.
3. The user only has this problem with the new section of the website--not the previous implementation of that section and not with the rest of the portal website. It only seems to be the new section we developed.
It doesn't seem like she needs to upgrade Word, as Powerpoint was upgraded in the referenced URL above, because it's working elsewhere in the portal. Are there any issues related to us developing the new section of the website that would cause this? Thank you for any assistance.

If Adobe documents are automatically saved instead of opened, check the Applications panel in Firefox ("Tools -> Options -> Applications") and change the action for PDF documents to either "Use Adobe Reader" if you want to use the application or "Use Adobe Acrobat (in Firefox" if you want the PDF file to open inside a Firefox browser window via the Adobe Acrobat plugin. If you want to be asked what to do with PDF files each time, select "Always Ask" for the action. See* [[Managing file types]] and [[Opening PDF files within Firefox]].
See also [http://kb.mozillazine.org/File_types_and_download_actions]

Why can't I share word documents directly from Word to mail any more?

Hi all
I just wondered if anyone could help with this annoying problem. It is probably to do with Mail, but it manifests itself in MS Word (latest version, updates complete).
I use to be able to share Word docs directly into Mail, using hte file>share>email as attachment but for a few weeks now I have not been able to do this. What I get is mail opens (or my MBP switches to the space I have Mail open in) and I get a new blank mail message, but in Word I get a rainbow wheel and it no longer attaches the document directly into the mail message.
Has anyone come across this?
I have managed to get it working a couple of times with a re-start, but it just goes back to the fault I described above.
Any help would be gratefully appreciated.
Thanks
Dave

Check out the discussion here on this same problem https://discussions.apple.com/message/20229092#20229092
Looks like the key is to repair permissions and then restart.

Using PowerShell to Copy the content of a Word Document and Paste that content into a New Message in Outlook

So, I'm a little new to PowerShell and I came across a PowerShell which allow me to copy the content od a spreadsheet, into the new message in Outlook 2007. I have search and search on a way to do the same with a Word Document. I would like to
create a PowerShell Script that copies the content of a Word Document and paste that content in an email message.
I am basing my script on this
#Create and get my Word Obj
$w1 = New-Object -comobject Word.Application
$w1.Visible = $True
$UserWord = $w1.Workbooks.Open("C:\Users\hhhh\Documents\Powershell\test.docx")
#create outlook Object
$Outlook = New-Object -comObject Outlook.Application
$Mail = $Outlook.CreateItem(0)
$Mail.SentOnBehalfOfName = "[email protected]"
$Mail.Recipients.Add("[email protected]")
#Add the text part I want to display first
$Mail.Subject = "Test email"
$Mail.Body = "My Comment on the Excel Spreadsheet"
#Then Copy the Word using parameters to format it
$Mail.Getinspector.WordEditor.Range().PasteExcelTable($true,$false,$false)
#Then it becomes possible to insert text before
$wdDoc = $Mail.Getinspector.WordEditor
$wdRange = $wdDoc.Range()
$Mail.Display()
Any Help would be great!

My requirements are the Word documents are a template of sorts. The document will be changes prior to its email with some changes. The other twist is that the customer might more that one recipients, and each recipient will have to have a separate
email, with the same content of the word document.
For example: Say I'm doing maintenance. The Word doc might descript that maintenance, in a set format. Once save the script is run to generate 3 to 10 email with separate recipients with the body of the email containing what was in the Word document.

Java.lang.NullPointerException in xRPM iView Preview from Portal Content

Hi all,
When I am trying to Preview the xRPM iViews from Content Administration>Portal Content> Portal Content> Content Provided by SAP> End User Content> Project Portfolio and Design Collaboration> iViews>Portfolio Manaagement> Item Dashboard
I am getting the following error
"500   Internal Server Error
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at com.sap.xapps.cprxrpm.ui.portfolioitem.dashboard.component.ItemDashboard.execute__Rpm__Item_Getlist_Input(ItemDashboard.java:339)
    at com.sap.xapps.cprxrpm.ui.portfolioitem.dashboard.component.ItemDashboard.wdDoInit(ItemDashboard.java:221)
    at com.sap.xapps.cprxrpm.ui.portfolioitem.dashboard.component.wdp.InternalItemDashboard.wdDoInit(InternalItemDashboard.java:1559)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
    ... 27 more
But I can view the "Item dashboard" on the xRPM under Portfolio Management.
I don't know why I can't Preview the same from Portal Content. My objective is to pick this iView and add this to another Customised workset/Role.
Pls help me.
thanks and warm regards
Purnendu

Hi,
Have you had a chance to fix this issue, pelase let me know?!
Thanks,
Parthi

How to open word document directly using ole2 and ole containers

Hello
i am using ole conatiners....in forms 6i. i want o open word document directly when i click a button....
i have tried host....ole but word opens .....i want the document to open at once.....
what should i use /set
plz tell by host command and ole2 as well
its urgent.....
thanks

Try this code, Hope this will work.
declare
item_name varchar2(80) := 'letter';
item_id item;
verb_index_str VARCHAR(20);
verb_index PLS_INTEGER;
verb_cnt_str VARCHAR(20);
verb_cnt NUMBER;
verb_name VARCHAR(20);
loop_cntr NUMBER;
begin
item_id := Find_Item(item_name);
IF Id_Null(item_id)THEN
message('No such item: '||item_name);
ELSE
verb_cnt_str := Forms_OLE.Get_Verb_Count(item_id);
verb_cnt := TO_NUMBER(verb_cnt_str);
FOR loop_cntr in 1..verb_cnt LOOP
verb_name := Forms_OLE.Get_Verb_Name(item_id,loop_cntr);
-- message(verb_name);
-- message(loop_cntr|| ' '||verb_name);
IF verb_name = 'Open' or Verb_name = '?E?'THEN
EXEC_VERB(item_id,verb_name);
END IF;
end loop;
end if;
EXCEPTION
WHEN OTHERS THEN
MESSAGE('Error: '||TO_CHAR(SQLCODE)||' '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE;
end;

Problems downloading a business package from Portal Content Portfolio

I had problem downloading the following business package from Portal Content Portfolio:
Business Package for mySAP CRM Business Productivity Pack (60.1).
Thanks,

Hi Amr
If it is a restricted shipment you will have problems downloading this business package.
Instead you can download this from the Marketplace.
You can give
Business Package for mySAP CRM - Business Productivity Pack 60.1
in the search option of Service Market Place
Regards
Rajeev.
Message was edited by: Rajeev Ullatil

How can I paste an MS Word document directly into gmail using Firefox browser, without losing all formatting?

I'm trying to paste a simple MS Word doc directly into the body of a Gmail email, but all formatting goes out the window. I've tried downloading a couple different HTML editors, including CoffeeCup (which doesn't work with Firefox) and Firefox's own Firebug, which, quite frankly, no one on this end can figure out (doesn't seem to be as user friendly as CoffeeCup). Please advise, as this will be an ongoing operation which we'll need to be able to perform. Thanks.

First, thanks for your reply. It's greatly appreciated. However, the level of your response fails to address the scope of the original question. Your first supposition is incorrect, that most MS Word docs copy uneventfully into the body of Gmail emails. This only applies to the most basic of MS Word docs (i.e., those utilizing minimal formatting, such as basic letters, etc.) and otherwise runs contrary to dozens of online complaints posted by users such as myself (though not on the Firefox website). Second, everyone knows you can add an attachment to Gmail emails. In this case, the recipient will not accept attachments of any kind, and has therefore asked that the content be copied directly into the email body. This is not uncommon in these cases. Third, the very nature of Notepad makes it unable to translate/interpret any documents beyond the most basic, hence its name: Notepad. Fourth, apparently this problem is rare or virtually non existent with other browsers, as all the complaints online appear to be Firefox related. Again, however, I appreciate you taking a stab at this.

Opening Word document templates from the New Document drop down does not open Word

I have a document library with a number of Content Types attached to it. Each one has a different Word document attached. We have an intermittent problem where when you click to open one of these templates from the 'New Document' drop
down list that nothing happens. The workaround appears to be either open Word first or re-boot the computer. I think there is a problem with SharePoint not linking in with Word correctly. Does anyone have any suggestions on how to fix this?
Thanks
Julie
J Sykes

Hi J,
Can you please check in your internet explorer whether MS office Add ons enable or not.
If not enable that and restart your browser and try again.
Also try to repair MS Office if issue still persist.
Regards
Soni K

Hyperlink in MS Word document to Oracle Portal 9.0.4 form does not work

Hi,
In a MS Word document a link to a Oracle Portal 9.0.4 form is written this way:
http://myserver/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=47602092358
When clicking on the link, and at the same time holding the Ctrl-button, an error is displayed
Error: An unexpected error occurred: ORA-01403: no data found (WWV-16016)
and the URL is changed to
http://myserver/pls/portal/PORTAL.wwa_app_module.show?p_sessionid=248080&p_header=true
But if the hyperlink is copy/pasted from the Word document to the addressline of any browser, the form is opened without problems.
Any proposals how to write hyperlink in MS Word to Portal forms will be much appreciated.
Thanks
Arne

hi frank,
the new version of the RTE is only available from 9.0.4.1 onwards. it is not available in 9.0.2.x.
we have a white paper on OTN:
http://www.oracle.com/technology/products/ias/portal/pdf/cm_rte_9041_features.pdf
regards,
christian

Read a .dot (MS Word Document Template) from jsp

Hi,
I have a link to a .dot (MS Word document Template file on the jsp page. While trying to access it from a link on the browser, the file is getting displayed in binary format.
If I try a normal word document or excel document, I am able to open/save the document.
I tried adding the following lines in the web.xml too with the same results.
<mime-mapping>
<extension>dot</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
and tried with this also
<mime-mapping>
<extension>dot</extension>
<mime-type>application/vnd.ms-word</mime-type>
</mime-mapping>
Can anybody help me on this ?
Thanks n advance, Sajiv

As you had directed, I tried a sample jsp with just
the link to the document. When I click on the link,
it allows me to open/save the document and the
default type it gives is with the extension.doc.
I am able to save the file as a .dot itself.
So, if this is coming from an application in a
server, is there any particular reason why it is not
functioning properly ?I don't fully understand if the problem is already solved or not?
When you mean by UserAgent, what do you actually
mean?An useragent is just a client application which can access network sources. In this case it is likely a web browser, for example Internet Explorer or Firefox. It might be useful to try as many useragents as possible so that you can exclude the useragent's default behaviour.

Retrieve XMLP documents directly from BLOB fields in E1; Tools Release 8.97

Hi,
I want to be able to retrieve XML Publisher reports (PDF, RTF, HTML) directly from the database BLOB fields in EnterpriseOne. Instead of making users manually save each report to get a soft-copy of the report, I wanted to be able to retrieve the reports from a BLOB field, create a new external file for it, and open the file with the related editor (MS Word, Adobe, IE, etc.).
We are on Oracle 10g, and I was able to get a file populated with some BLOB data for a particular RTF file. However, when I try to open the file in MS Word, all I get is junk.
Does anyone know if JDE stores these documents differently into BLOB fields than standard?
Here is the code I used using PL/SQL...
DECLARE
xmlstr BLOB;
warn VARCHAR2(400);
v_file Utl_File.file_type;
line_buf RAW(32767);
maxbufsize BINARY_INTEGER := 32767;
amount BINARY_INTEGER;
offset BINARY_INTEGER;
dir varchar2(50) := 'XMLP_DIR';
filename varchar2(50) := 'JPARK_TEST.rtf';
bsize NUMBER;
BEGIN
v_file := utl_file.fopen(dir,filename,'wb',maxbufsize);
SELECT xorpdxpblb INTO xmlstr FROM sy812.F95631 WHERE xorpdorgud = '2115630440008e-SMNQTWZCFI-YEKRWCIOUA';
--SELECT xdrpdubblb INTO xmlstr FROM sy812.F95630 WHERE xdrpduogud = '21080156900001-SMNQTWZCFI-ORORNYFSYJ';
bsize := dbms_lob.getLength(xmlstr);
dbms_output.put_line(bsize);
amount := maxbufsize;
offset := 1;
WHILE (offset<bsize) LOOP
DBMS_LOB.read(xmlstr,amount,offset,line_buf);
utl_file.put_raw(v_file,line_buf, TRUE);
offset := offset+amount;
--utl_file.fflush(v_file);
--Dbms_Output.put_line(offset);
END LOOP;
utl_file.fclose(v_file);
EXCEPTION
WHEN OTHERS THEN
UTL_FILE.FCLOSE_ALL;
DBMS_OUTPUT.PUT_LINE('WHEN OTHERS');
dbms_output.put_line(substr(sqlerrm,1,254));
END;

the database and blob fields are identical. In the 11i (eBusiness suite) we would store this information in fnd_lobs.
Ike Wiggins
http://bipublisher.blogspot.com

Can't browse to Word document

I am trying to use Contribute to browse to and then edit a MS
Word document on the webserver. When I click on the link in the
website of the word document, I always get a popup window asking to
open in Word , or save the file. The file is then edited/saved on
the local machine, never updating the website version. The page
displaying contribute never changes from the page with the word
document links.
I was reading that you should be able to navigatate to the
document and then select 'edit with external application'.
Any ideas?

Hi all
Colum, I doubt that Peter's info on that page will apply here
because as I understand it, this is a RoboHelp for Word project.
Folks, I know it appears to be a seductive thing to want to
try and do. I'm talking about the desire of "sticking with the
Devil you know" meaning Word.
If you are creating WebHelp output, it would behoove you to
at least give RoboHelp HTML a once over. The editing interface is
very "Word like". You will find that a great many things you
struggle with Word over disappear in RoboHelp HTML.
Just a thought... Rick

How do I adjust settings to allow me to print documents directly from the internet, i.e., emails?

I am unable to send documents directly to the printer from the internet. I must either download or switch to a different browser. Message advises that "Communication not available. Printer cannot communicate with the computer."

Reinstall the printer drivers.

Output word document generation from the properties.

Hi Everybody,
               I need to generate a word document from the Substance property values stored. How to generate a word document in a specified format..
Thanks,
Rajesh.

Hi Andeas,
              My problem is, I want to create the templates as well as i want to see the generated reports.
               While installing WWI, i got four options called 1.Information system/labelling Workstation, 2.Install generation server, 3.Workstation for editing templates and 4.WWI file server installation. I installed only third one Workstation for editing templates. Should i install other than that as well.
               I want to confirm the procedure for the release template as well. Before releasing a template you need to add the template through the DMS and next mention the same template in the CG42. After that create the variant (CG2B). Next go to CG02. I think while going through a help i gone through a sentence like first i need to upload file in CG3Z and Import template CGCZ things. I just checking whether they are working properly or not.
         Also while trying to create a template from WWITEMPLATE in the Layout folder, i used <i>WWI -> Insert Symbol</i> is not giving any values. Any idea on this
              Please give me some advice..
Thanks,
Rajesh.
Message was edited by:
        Rajesh Madala

Browsing ms-word document directly from portal content window.

Similar Messages

Maybe you are looking for