Browsing SE W600i using Bluetooth

I can pair my phone and computer (10.4.6) without problem and iSync works as it should. Address book also claims to be able to connect to the phone (although I can't send SMS or dial... haven't seen if I'll get an onscreen message if I recieve a call).
No other applications can connect to the phone. If I use Bluetooth File Exchange and try "browse device" it does nothing. Trying to connect Salling Clicker from the computer fails (although I can initiate the connection from the phone without problem.
I've been trying to find the answer in other posts but don't see anything that fits.

same thing here. let me know if you find an answer. I can get the onscreen pop-up when a call comes in - you have to have addressbook open and connected to your W600i for that to work. But no dice on SMS or dialing from addressbook.

Similar Messages

  • How can I use bluetooth to send data to my mac book pro?

    I can connect my smartphone (nokia) to my Mac Book Pro, but if I try to send something from Nokya to my Mac using bluetooth, that's impossible. The only way is to search what I wanto to store in my Mac, using the Mac and browse my Nokia with Finder.
    Is this correct ??
    Is the bluetooth an univesral protocol to send and receive data between two sources ???
    Why my Mac is unable to receive the data sended by another source ?? (the same question is valid using an iPhone and another smartphone to try to send/receive data).
    Many thank for your response.
    Ezio

    I have many movies I made in iMovie and need to burn to DVD for players.
    You need this:   http://www.apple.com/findouthow/movies/idvd.html#custom
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • I can send item from my macbook air to my phone using bluetooth but i can't seem to receive them from my phone it always says sending failed

    I have paired my phone and my macbook air using the bluetooth and I can send files from my macbook air to my phone but I cant seem to send them from my phone to the computer.
    When browsing my phone using the bluetooth on the macbook air it doesnt come up with any files.
    What can I do to send my files to my laptop from my phone?

    Have you enabled Bluetooth Sharing in the Sharing system preferences pane on your Mac?

  • Sending files from phone using bluetooth.

    How can I send files from phone (Nokia E61) to MacBook using bluetooth?
    There are the steps that I'm doing:
    1-Open bluetooth on my phone and Mac.
    2-select files on my phone.
    3-select send via bluetooth.
    4-select my Mac form bluetooth devices menu.
    5-click send.
    6-Connecting....
    7-Sending failed.
    I believe there is something that I have to do on my Mac to accept these files.
    BTW, I can browse my phone from Mac, but it's much easier to send files from phone to laptop.

    This post solve the problem:
    http://discussions.apple.com/thread.jspa?messageID=7795370

  • Browse cell phone through Bluetooth

    I am a relatively new mac user and I am trying to browse my cell phone using bluetooth. I have tried it using more than one cell phone. When the box opens that says browsing it remains empty and does not allow me to access any of my files on the phone. What am I doing wrong?

    The File Sharing checkbox is for sharing files between Macs via Bonjour or network connection, so it doesn't apply to Bluetooth phones.
    In the Bluetooth system preferences pane, click on your phone on the left-hand side, and then have a look to see what Services it reports as having on the right-hand side. Also, check that it say's 'Yes' alongside 'Paired'

  • Error message when trying to use bluetooth connections

    Windows 7
    Torch 9800 and Curve 8310 and Playbook
    I'm trying to send using bluetooth to all of the above and get the error message "Abort FTP operaton, no services found"
    I can see all the devices on the laptop, and on each device I can see the laptop.
    Any help gratefully received, thanks.

    Hi Inedia,
    Are you trying to send files from the computer to the BlackBerry® Torch™ 9800 smartphone, the BlackBerry® Curve™ 8310 smartphone, and BlackBerry® PlayBook™ tablet? 
    Currently Bluetooth® file transfer is supported only between 2 BlackBerry® smartphones. This KB article should provide more information. "How to transfer a file using Bluetooth technology between two BlackBerry smartphones"
    http://bbry.lv/KNI0Rj
    Thanks.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Anyone using BlueTooth with MSI KT3 Ultra-Aru?

    Has anyone setup BlueTooth PC to PC network with the MSI KT3 Ultra-Aru?
    Where can one get the transmitter?  (assuming it works)

    Quote
    Originally posted by cje1985
    i have a kt3 ultra aru it says it has blue tooth and on the usb 2.0 dongle it says do not remove if you use bluetooth but when i follow the manual to plug it in windows or the software finds the bluetooth connection
    Hi,
    I have a KT3 Ultra ARU too, and I understand that if you use the onboard Bluetooth connection you must not use the USB connection under the blue sticker at the same time.
    I think it's because the onboard Bluetooth connection and the USB connection under the sticker use the same adress (IRQ). So as long as you have no Bluetooth, like me, you can use the 4 USB connections. If you use Bluetooth connection on board, do not use the USB connection under the sticker (the left one seen from backside of your PC).
    If you use an external Bluetooth it's not a problem with your 4 USB connections.
    ralcan

  • Incoming calls not using Bluetooth / Music tracks repeating

    I've been having a problematic issue with Bluetooth since upgrading to iOS 7. I have my iPhone 5 paired with my 2013 Hyundai Elantra's Bluetooth system.
    Outbound calls use Bluetooth just fine, as does Siri, but any incoming calls all use my iPhone's headset by default. I have to manually switch the phone's output back to my car's bluetooth in order to talk using my car's hands-free system... which really defeats the purpose of hands-free.
    I'll note that this is happening both when my iPhone is plugged in via USB and listening to music on the car's stereo, as well as when the iPhone is simply idle in my pocket. I have not tested what happens when the car is playing my iPhone's music via Bluetooth (the audio quality is sub-par to a direct connection and doesn't display the artist/track/album on the console when playing via Bluetooth - ergo I rarely use it)
    Secondly, I am having another issue, this time with playing music. I don't believe it's related to the above Bluetooth issue, but it may be related to my car.
    Like I said above, I often use my Elanta's USB port to directly plug in my iPhone so I can a) listen to music on the car's stereo and b) skip tracks with the wheel-mounted controls. This all worked flawlessly with iOS 6.
    Now, if I skip a track with my car's controls, the Music app will repeat that next track... over and over. When the song is completed, it will attempt to move on to the next song, then immediately backtrack and start playing the previous song again (you can tell so by watching the Music app. The album art will swipe over, then quickly swipe back). I have to manually skip forward to play a new song... Highly irritating.
    I'll also note that skipping songs via the wheel-mounted controls is considerably slower than it was with iOS 6. It's definitely a couple seconds after I press a button before the next song starts to play. It used to be near-immediate.
    Anyone else having either of these issues? Hopefully it's something Apple picks up on and fixes soon!

    Don't know if you got this yet, but I came here looking for answer. Since I just found one, figured I'd pass it on for others:
    You have to set your phone's incoming calls to "headset" under accessibility. (Silly, I know, considering, if you hook up a bluetooth, it should automatically default there, but no ...) This walks you through:
    http://www.imore.com/how-set-default-call-answer-mode-iphone

  • How do I use bluetooth on ipad

    I am trying to connect my ipad 2 to my phone with bluetooth. the phone found the ipad but ipad wants a pin. This is the first time I have used bluetooth on ipad so have not setup a pin number. what do I use?

    Connect it to your phone for what reason? The only supported Bluetooth connection would be for tethering. You would connect through the Personal Hotspot settings.

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • Attempting to use bluetooth for the first time, and it never sees any other devices

    I have an iPad 2 about a year old, running iOS 6.0.1.  This morning I tried to connect to another iPad, over bluetooth, and neither iPad is able to discover the other.  This is the first attempt to use bluetooth on either of these iPads.  The other iPad is also running iOS 6.0.1.  The iPads were less than 10 feet apart.
    On both devices, I went to settings:bluetooth, and turned blutooth "on".  This opened up a "Devices" box, which says "Searching...", with a spinning wheel icon. Below this box is says "Now discoverable".  Both devices remained in this state.
    I haven't used bluetooth before so I have no idea what I am doing wrong.
    Later in the day I fiddled with the bluetooth systems prefs panel on my desktop (a circa 2005 intel mac running OSX 10.6.8).

    (hadn't finished my earlier message but somehow it posted it before I was ready).
    From the OSX bluetooth panel, I turned bluetooth on, and made my computer discoverable.  I then hit "setup new device", and was taken to the Bluetooth setup assistant.  After a few seconds it showed me my ipad as one of the devices it had discovered.  Over on the ipad, though, it did not discover the desktop machine.
    After about a minute, I then selected the ipad from the list of devices on the desktop machine, and hit "continue".  At this point it said "attempting to pair with MyIpad", and "connection established".  At the same time, a panel popped up on my iPad, listing my desktop machines name, and asking for a PIN.  It is not clear to me whether it is asking for a PIN that I have supposedly set up on the desktop machine, or if it is asking me to establish a PIN.  So I quit.
    In any case, my goal in going through this attempt on the destop machine was solely to establish whether the bluetooth hardware is working on the ipad.  I believe that has to be true.
    So, can someone explain to me what steps I am *supposed* to go through to pair up two ipads over bluetooth?

  • Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

    Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser.  I have tried restore option also.  This is happening with both Wlan and Data con. too
    Please help...

    I do not really know much about this kind of problem, but i may be your internet connection.
    If you are on your own #G network then:
    Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
    Then wait patiently until you get a good connection and then try again.
    If you are on a nearby Wi-Fi connection then:
    Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
    If all else fails, then you need to contact your provider for assistance.
    Sprint:888-211-4727
    AT&T:?
    Verizon:?

  • Can I share music between Mac and iPhone using bluetooth

    While I use Home Sharing to allow my phone and my wife's to access an iTunes library housed on my Macbook Pro, when we travel by air obviously we do not have Wi Fi available. I know I can buy a "Y" cable to connect two sets of earphones to my Mac so we can both listen to music without disturbing other passengers, but I'm wondering if we can eliminate cabling both devices to the Mac by using bluetooth?
    Any suggestions would be welcomed.
    Thanks

    No

  • How can I use Bluetooth on my iPhone to discover other phones?

    I recently tried turning on Bluetooth on my iPhone to try to discover my wife's phone. My wife has a Samsung Eternity phone. Her phone was in discoverable mode and my iPhone never could discover it. I also tried this with my friend who has an iPhone and it still did not work. Is the Bluetooth on an iPhone not supposed to be used to connect two phones? I thought it was supposed to be used to connect to other phones, especially iPhones for gaming purposes. Please help me learn to use my Bluetooth correctly or inform me if the iPhone is not supposes to connect with other phones through Bluetooth.

    If you check the iTunes Apps store and seem to recall that there is a program that will allow you to transfer Photo's between iPhones using Bluetooth. I stand to be corrected but is this not a feature of the new iPhone 3GS Ant..

  • Can I use bluetooth for data transfer to/from iPhone?

    I was wondering why I cant get my iPhone Bluetooth feature to work/connect with a Razor phone...
    Can I not hook up, using Bluetooth, to another phone and recieve ringtones?
    Or am I not doing something right in the Bluetooth mode?
    Any help would be great!!!

    The iPhone's bluetooth is limited at the moment to bluetooth headsets and car kits
    Even if you would succeed in pairing it you cannot transfer any type of files from it to the other phone

Maybe you are looking for