Browsing Websites while in Presenter View Mode?

Hi,
I am doing many presentations where I have to comment on the content of websites and I have been using a lot the Web View feature, which I love. However, I don't seem to be able to do it while on presenter view mode, since I can't click on the slide to open the browser; it will just go to the next slide.
Is there any way of doing this (apart from using single screen mode)? I am very comfortable on Two Screens mode and I don't want to go on One Screen mode just because I have to show a website online...
Thanks
JL
Powerbook G4 Mac OS X (10.4.6)

Thanks. This actually work as you said, by clicking on screen 2.
However, in most cases this may not be very useful...since you have to browse the website also in screen 2, which most times will be behind you, and if it's big it will be hard to read and many links will be hard to reach...
Anyway, I imagine there is no other way and what we need is another feature for Keynote 4...maybe automatic switching from 2 screen to mirror when you browse a website?
JL

Similar Messages

Skip Animations while in Presenter View via keyboard?

Is there a way to skip an animation while in presenter view? I use an RF remote that simulates pressing the right and left arrows on the keyboard.
Typing something on the presenter view/keyboard of the computer isn't an option since the computer is in the back fo the room with the AV equipment and I'm in the front.
Thanks!

Erik,
I think "am just chopping up the slides wherever we have those kinds of transition points" might be the best possible solution....where at the space you need to switch programs one slide ends and the transition to the next slide requires a manual click ... you use Alt+Tab to switch to the other program, run it, then when finished Alt+Tab back to KN and manually click. (Using Duplicate Slide might be helpful....deleting what you want after the other program from the first and deleting what you wanted before the other program from the second slide....with the manual transition appearing between the slides.)
I will be interested if somebody has an alternative answer.

Order prints while in view mode?

Is there a way to order prints while in the view mode while the picture is nice and big, rather than having to select all pictures from an event when they are much smaller?

/discussions/board/message?board.id=smartphones&message.id=42912

Animations reset if you switch away from Presenter view?

This may be fairly unique to us, but in the middle of a Keynote presentation while in presenter view, I will have to switch away from Keynote to another application and then I would like to switch back.
The problem is if there are 5 animations on a slide and I am on the third, when I switch back to Keynote for whatever reason Keynote is back at the first animation as if I just pulled the slide up for the first time.
I've poked around to see if there is an option or anything to turn this "feature" off and haven't found anything. I don't know why anyone would want that behavior either.
Anyone have any ideas? For now, I am just chopping up the slides wherever we have those kinds of transition points but it's a real pain. All I want is for Keynote to "Freeze" and chill in the background while I temporarily switch to another program that I need to show, and be right where I left it when I switch back.

Erik,
I think "am just chopping up the slides wherever we have those kinds of transition points" might be the best possible solution....where at the space you need to switch programs one slide ends and the transition to the next slide requires a manual click ... you use Alt+Tab to switch to the other program, run it, then when finished Alt+Tab back to KN and manually click. (Using Duplicate Slide might be helpful....deleting what you want after the other program from the first and deleting what you wanted before the other program from the second slide....with the manual transition appearing between the slides.)
I will be interested if somebody has an alternative answer.

How to type on presenter view

I created a powerpoint for my students and one of the slides is set up for them to take turns entering the weather each day.
I created the text box and followed the instructions on how to do that and it works. However, when I plug my computer into the projector to present it on the TV, the slide advances to the next slide when a student comes up to type in the weather.
They can type in "sunny" or "rainy" when the powerpoint is in slideshow mode, but once my computer is plugged into the projector, they cannot type anything anymore because the slide automatically advances to the next slide when they come
up and click on the text box to type.
How can I get this to work for me when my powerpoint is set up and plugged into the TV?

Hi,
When you say the "text box", I think you are referring to the Text Box (ActiveX Control). Seems these controls just not work in the Presenter View mode.
To work around, when you connect to a projector, please right click in the screen, then choose "Hide the Presenter View". Now you will be able to click on the text box to type. Once done, you can right click in the screen again,
then choose "Show Presenter View" to back to Presenter View mode.
This mode switching should not impact the presentation on the projector.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Music will stop playin after browsing websites

I just noticed that my songs will always stop playing if I try to browse website while having the music on. Is there anything I can do to it? Is this a common problem within iphone user or is it just me?
any info will be appreciated.
thanks

i had that problem as well...do a reset on the phone: hold down BOTH the on/off and home buttons until you see the apple logo (continue to hold the combination past the 'turn off' request) and let the phone restart itself, it seemed to have resolved the problem, but i havent tested it fully yet. Good luck!

Is there a way to toggle to a web browser while in Keynote presenter view?

I teach at a number of research classes at a University and I prefer to use Keynote as a teaching tool. My teaching requires that I access websites regularly throughout the the class.
Here is what I'm currently doing:
1. Before the class starts, I open each website we'll be using during the class as window and assign the window to it's own desktop. So if I have four websites the students will be accessing during class, I'll assign those four websites to four distinct Mission Control desktops (I'm using the 10.8.4 OS X).
2. I run my presentiation from Keynote using the play key, but without access presentation mode.
3. When I need to access a website while teaching, I [ALT]-[TAB] out of Keynote, select the appropriate page from Mission Control, and demo that page.
4. When I'm done, I simply click the Keynote icon in the dock and resume my presentation.
This system works and I have no real complaints with it - except that I cannot take advantage of Keynote's presentation tools. I've tried any number of ways to toggle to a web browser while in presention mode without success. While in presentation mode, if I [ALT]-[TAB] out of the presentation, it simply stops the presentation and the web page doesn't appear on the projection display (because I'm not mirroring my displays) and the only way to get it to work is to re-mirror my displays.
I tried using the X command in Keynote, which is the toggle between displays, but no matter what I did, I cannot get the webpage to show up on the projection display.
Is there an easier way to do this? Bear in mind, I'm not merely showing webpages, but I'm actually interacting with them (performing research on these pages) so they have to be operational. Right now I'm assuming presentation mode is just not going to work for this kind of scenario.
Thanks for any suggestions.

place as many shapes as you need on a slide and create a hyperlinks to your website
Keynote preferences > slide show; select > allow Expose and others to use screen
select the shape and in Inspector > Hyperlink; select the enable as hyperlink box, then type in the address
use alt > tab to go back to Keynote
before playing Keynote, open and move the web browser on to the projector screen to position it ready for use

So far so good. But then, how do you return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in mi iMac.

In my ipad, looking at photos with red eyes I enter edit mode, red eye tool, correct and then what? How do I return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in my iMac. Any solution ?

In my ipad, looking at photos with red eyes I enter edit mode, red eye tool, correct and then what? How do I return to the viewing mode while preserving the corrected photos. There is no way out such as a button " done " like the one present in my iMac. Any solution ?

Main viewer mode affects browser mode but cannot be switched in browser mod

The main viewer modes - specifically Multi and Stack change the selection and navigation operations of browser mode, but cannot be adjusted in browser mode.
For example, if the main viewer mode is Stack mode, then the stack pick is green, the motion left and right cursors do nothing (beep), and multi-selection is not possible. While this is useful if you want to do stack operations, it's annoying if you don't, and it's not possible to switch to multi-select off without either going to the main viewer and changing it, OR (oddly) double clicking on a non stacked image and that goes to the main viewer AND changes it.
Ideally you should be able to switch main viewer mode even when you are in browser mode.

The main viewer modes - specifically Multi and Stack change the selection and navigation operations of browser mode, but cannot be adjusted in browser mode.
For example, if the main viewer mode is Stack mode, then the stack pick is green, the motion left and right cursors do nothing (beep), and multi-selection is not possible. While this is useful if you want to do stack operations, it's annoying if you don't, and it's not possible to switch to multi-select off without either going to the main viewer and changing it, OR (oddly) double clicking on a non stacked image and that goes to the main viewer AND changes it.
Ideally you should be able to switch main viewer mode even when you are in browser mode.

IPhoto 11: How to view "all photos" while in full screen mode

In iPhoto, when it's not in full screen mode, if you click photos in the sidebar (under Library), you get a nice view of ALL your photos, and you have the option to sort them by event. When you go from this view straight to full screen mode, it stays this way, which in my case is particularly useful since I like to move photos around from event to event. However, staying in full screen mode, as soon as I click an any other of the menus at the bottom (events, faces, places, albums, projects), I cannot find anyway to get back to the "all photos" view, other than to take it OUT of full screen mode, click on "Photos" in the side bar, and then go back to full screen mode. Either I am missing something that is glaringly obvious, or this is a rather annoying oversight by Apple. It seems like it would be natural to have "Photos" be one of the options along with Events, Faces, Places, Albums and Projects in full screen mode. Right now the only work around I've been able to come up with (aside from going back and forth with fullscreen mode), and to hit "command F" while in full screen mode, and then type "i", which will give me what I am want only because all my photos start with "i". Not a very elegant work around, I know, but perhaps I am missing something very obvious.
Thanks for any advice!
James

In case my description isn't clear, here is a screenshot of exactly the view in full screen mode I am talking about that I can't seem to return to once I leave it, other than to go back to non full screen mode or use the search trick.

Imports not displayed in browser view mode

Why are my photo imports displayed as black images in browser view mode?

Not sure on your version but right click the member and select "View member properties", it should display a property window and attributes will be in there.
There is also the atrribute viewer
Cheers
John
http://john-goodwin.blogspot.com/

How can I browse websites without disabling FP or Protected Mode?

I have been installing the latest Flash Players on Windows 7 computers, with IE 8 and 9 for over a month with this issue. Once our Users are logged in with just User Level accounts they may be able at first to browse websites like MSN or TV stations, but the next day or so cannot do so (Pages take forever if they waited!) unless the IE Add-on of Shockwave Player is disabled, or IE Security setting Protected Mode is unchecked (disabled). I've tried some steps including changing the Hardware Acceleration, uninstalling and re-installing Flash Player. I'm not finding a solution! Your help will be appreciated!

Hi Joe,
This is a known issue with IE and should be fixed with our latest beta release which you can download here:
http://labsdownload.adobe.com/pub/labs/flashruntimes/flashplayer/flashplayer11-6_install_w in_ax.exe
Please give it a try and let us know how it works for you.
Thanks,
Chris

Remote front panel with viewing mode in monitor jams if two browser connects

I made a exe with the vi attached, with the web publishing viewing mode set to monitor every 1s.
I copy all the executables and generated files to a target computer. The target computer is 4 CPU 2Ghz, 1Gb RAM, Windows 2000.
If I open a client web browser connection to the remote panel, everything is fine, I can see updates every 1s or so.
But if I open two client web browser connections, the display in the two web browser grinds to a halt, and the exe in the server computer slows down from 1s update to 6s update.
If shut off one client web browser, the other client browser and the exe in server go back to normal speed.
So what is the problem? How do I solve this problem? Is this problem solvable?
Attachments:
monitor4.vi ‏85 KB

Bump.

Mouse no longer scrolls photos in 2 view modes

In A2, if I hovered the mouse over the strip and used the wheel (Revolution MX) it would scroll the thumbnails. If I hovered it over the selected, large photo I could scroll through one-by-one. Same in Viewer mode-scrolling up or down went to the next or previous photo. Now it only works in Browser mode or in the strip in Split View. This has ruined my whole workflow of rating with my left hand while scrolling with the mouse in the right.
I've checked the settings I know, such as Primary on or off, with no luck. Any help would be appreciated.

Yes, it looks like scrolling has been changed as you describe.
Dont forget that the arrows and numeric pad (if you have a full size keyboard) work very well. I find rating to be a one handed job using a thumb on the right arrow and a finger for the rating value. Its fast after a bit of practice.

Dual Display using "Presenter View" as in MS PowerPoint

I have a T410 type 2522-A92 and want to present slides on a projector screen while on my laptop monitor I can see the slide and my notes. I have so fare been unsuccessful in doing this. Is my laptop model not equiped for this task and if so, is there any way I can put this right.
Solved!
Go to Solution.

Hi Kappelmeister,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you had trouble using extended display in your Lenovo ThinkPad T410.
For using PowerPoint in Presenter Mode, the extended desktop feature must be enabled for this mode to function. Press FN+F7 to switch to extended display mode.
In PowerPoint, go to the Slideshow menu and click "Set up show”.
Click on the Presenter Mode or Show Presenter View.
After doing this and starting the slide show, the slide will appear on the second monitor (the projection screen) and the laptop screen can be used to access something in private.
Refer here for further information on how to configure PowerPoint to use presenter view with two monitors.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Browsing Websites while in Presenter View Mode?

Similar Messages

Maybe you are looking for