Brtools receiving map : Permission Denied
env is ecc 6.0, oracle 10.2.0.4
run brbackup via DB13 (BRBACKUP 7.10 (14))
get return code 1 with the following log:
BR0280I BRBACKUP time stamp: 2008-10-08 06.14.39
BR0232I 193 of 193 files saved by backup utility
BR0230I Backup utility called successfully
BR0278I Command output of '/usr/sap/DV1/SYS/exe/run/brconnect':
BR0801I BRCONNECT 7.10 (14)
PID=1413346
1413346 : map : Permission Denied
1413346 : map : Permission Denied
BR0280I BRCONNECT time stamp: 2008-10-08 06.14.40
#SIGNAL CAUGHT: 15
BR0074W BRCONNECT call failed
BR0280I BRBACKUP time stamp: 2008-10-08 06.14.41
ls -l br*
-rwsr-xr-x 1 oradv1 sapsys 5754767 Oct 01 08:45 brarchive
-rwsr-xr-x 1 oradv1 sapsys 5916278 Oct 01 08:45 brbackup
-rwsr-xr-x 1 oradv1 sapsys 7527921 Oct 01 08:45 brconnect
-rwxr-x--- 1 dv1adm sapsys 6460221 Oct 01 08:45 brrecover
-rwxr-x--- 1 dv1adm sapsys 2382536 Oct 01 08:45 brrestore
-rwxr-x--- 1 dv1adm sapsys 7822218 Oct 01 08:45 brspace
-rwsr-xr-x 1 oradv1 sapsys 3070886 Oct 01 08:45 brtools
Edited by: Wayne Engelbrecht on Oct 8, 2008 9:52 PM
hi wayne,
make sure that all your br*
-rwsr-xr-x 1 oradv1 sapsys 5754767 Oct 01 08:45 brarchive
-rwsr-xr-x 1 oradv1 sapsys 5916278 Oct 01 08:45 brbackup
-rwsr-xr-x 1 oradv1 sapsys 7527921 Oct 01 08:45 brconnect
-rwxr-x--- 1 dv1adm sapsys 6460221 Oct 01 08:45 brrecover
-rwxr-x--- 1 dv1adm sapsys 2382536 Oct 01 08:45 brrestore
-rwxr-x--- 1 dv1adm sapsys 7822218 Oct 01 08:45 brspace
is owned by oradv1.
Then try ro run again
ardhian
http://sapbasis.wordpress.com
Similar Messages
-
Receiver File adapter - FTPEx: 550 Permission denied
Hi all,
We are getting the following error from a File receiver comm. channel:
Delivery of the message to the application using connection AFW failed, due to: com.sap.aii.adapter.file.ftp.FTPEx: 550 Permission denied to "inbound"..
The FTP connection is anonymous so anyone (within our network) can login on this server, folder rights are also set to all i.e. anonymous user can create, read, delete files on the target folder.
I have tested to the target folder using IE browser, I was able to logon the server, read, create and delete files.
Has anyone of you an idea why the adapter engine still cannot create a file?
Regards,
Roberto> Hi Roberto,
> 'Anonymous' is a default user that exists in Unix
> nix layer. But for this user also you need to provide
> the file write/read/delete permissions into the
> folder. Then only you can write a file evenif you are
> using 'Anonymous' User.
>
> Cheers
> JK
Hi there,
As explained before; we have tested the same FTP connection (using the same anonymous account) via a DOS session and also via IE (from the XI server), both tests were successful and we were able to create/delete files without any problem.
So again, the problem is only with the File/FTP adapter which for some unexplained reason cannot get access to this folder.
Are there any special (not mentioned in the SAP documentation?) prerequisites to establish a FTP connection using the file adapter?
Any help is highly appreciated!
Thanks, Roberto
BTW; we are on SP14 and the XI server runs under a Windows Server machine.
Message was edited by: Roberto Viana -
I just purchased a Creative Cloud subscription and I was trying to install Photoshop, but I receive the error message 'Error Starting Creative Cloud - cookies dir: cannot make folder /cookies Permission denied (error 13)'
Hi Arjun and tphc,
try the solution I found and tested at this other thread:
http://forums.adobe.com/message/5628798
I think it could be helpful for you too!
Cheers,
Marco -
Receiving error: "The operation couldn't be completed. Permission denied."
When I startup Final Cut Pro X under 10.7.2 on a Mac Pro I'm receiving the error "The operation couldn't be completed. Permission denied." Then after I press "OK," FCPX finishes loading. I've searched the Community but haven't found an answer to why this is happening or how to fix this. Does anyone know?
I also have Final Cut Studio loaded on this machine.
Thanks very much.I've seen this, and I'm sure it was something simple.
Have you tried trashing your preferences?
Unexplained faults like this can often be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and perfectly safe, both to download and use).
With Preference Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
If you trash them and don't restore them, you will need to manually restore all your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then if they get corrupted you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
Can't guarantee it, but it's worth a try.
Andy -
Receiver File Adapter - Permission Denied
Hi,
I have a problem with posting a file to a specific address at a ftp (file adapter). I get the follwing error.
<i>Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: XI_ftp_467febcd-b4df-25c4-e100-00000af501ca.tmp: Permission denied.: com.sap.aii.adapter.file.ftp.FTPEx: 553 XI_ftp_467febcd-b4df-25c4-e100-00000af501ca.tmp: Permission denied.</i>
I have no problem posting to other addresses so the file adapter is working. I have two things that I can thing of, that is different from the ones working.
- The username and the address both has "_" in them.
user: com<b>_</b>test
address: /test/comp<b>_</b>test/
- The password contains special characters
password: Q2bE3x (example)
Can any of those things be the problem or is there somthing else?
Best Regard
ClaesCheck out the directory has enough permission to write on...atleast 660
also make sure that, FTP site is able to connect from the PI via ftp command..
Hope this helps,
Rgds,
Moorthy -
Apache user dir (13)Permission denied: access to /~simha/ denied
I am getting Access forbidden! when I am trying to connect to http://localhost/~simha/ where simha is my user name
my /var/log/httpd/error_log says
[Thu Jul 08 17:44:30 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /~simha/ denied
I tried a lot and gave up. Can any one help me in this in regard
The following are the permisions of my home dir simha and public_html
drwx--x--x 130 simha users 16384 Jul 8 17:04 simha
drwxr-xr-x 2 simha users 4096 Jul 8 17:02 public_html
The following are my httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks includes
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# phpMyAdmin configuration
Include conf/extra/httpd-phpmyadmin.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
The following are my /etc/httpd/conf/extra/httpd-userdir.conf
# Settings for user home directories
# Required module: mod_userdir
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Note that you must also set
# the default access control for these directories, as in the example below.
UserDir public_html
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
<Directory /home/*/public_html>
AllowOverride FileInfo AuthConfig Limit Indexes
Options MultiViews Indexes SymLinksIfOwnerMatch ExecCGI
<Limit GET POST OPTIONS PROPFIND>
Order allow,deny
Allow from all
</Limit>
<LimitExcept GET POST OPTIONS PROPFIND>
Order deny,allow
Deny from all
</LimitExcept>
</Directory>
I also tried adding user to the group http. BUt nothing is working.Do you have [or more like lack] +x on the user folder?
-
[SOLVED]xinit as user - dri permission denied
I've tried to launch a game in a separate X instance with:
xinit /usr/bin/ufo -- :1.0 vt2
xinit /usr/bin/ufo -- :1
xinit /usr/bin/env ufo -- :1
etc
but I get very slow rendering and strange output.
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH i686
Current Operating System: Linux archdesk 3.12.9-1-ARCH #1 SMP PREEMPT Sun Jan 26 09:15:23 CET 2014 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=99a6d650-3886-4252-8ded-db4a892400e2 rw quiet
Build Date: 09 January 2014 09:32:33AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Jan 26 15:16:22 2014
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
setversion 1.4 failed: Permission denied
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
(II) [KMS] Kernel modesetting enabled.
setversion 1.4 failed: Permission denied
---- endianness initialization -----
found little endian system
---- filesystem initialization -----
Adding game dir: /usr/share/ufoai/base
Added packfile /usr/share/ufoai/base/0base.pk3 (15 files)
Added packfile /usr/share/ufoai/base/0maps.pk3 (932 files)
Added packfile /usr/share/ufoai/base/0materials.pk3 (54 files)
Added packfile /usr/share/ufoai/base/0media.pk3 (19 files)
Added packfile /usr/share/ufoai/base/0models.pk3 (2801 files)
Added packfile /usr/share/ufoai/base/0music.pk3 (64 files)
Added packfile /usr/share/ufoai/base/0pics.pk3 (1059 files)
Added packfile /usr/share/ufoai/base/0shaders.pk3 (37 files)
Added packfile /usr/share/ufoai/base/0snd.pk3 (362 files)
Added packfile /usr/share/ufoai/base/0textures.pk3 (2721 files)
Added packfile /usr/share/ufoai/base/0ufos.pk3 (137 files)
Could not load '/usr/share/ufoai/base/0videos.pk3'
Adding game dir: ./base
Adding game dir: /home/dok/.ufoai/2.6-dev/base
using /home/dok/.ufoai/2.6-dev/base for writing
executing filesystem.cfg
executing default.cfg
executing config.cfg
----- network initialization -------
libcurl/7.34.0 OpenSSL/1.0.1f zlib/1.2.8 libssh2/1.4.3 initialized.
------ server initialization -------
added 12 maps to the mapcycle
----- console initialization -------
Console initialized.
------- video initialization -------
libGL error: failed to load driver: r300
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
SDL version: 2.0.1
I: setting mode 21
I: disable multisample buffers
I: set swap control to 0
available driver: x11
available driver: dummy
current desktop mode: 1600x900@60Hz (SDL_PIXELFORMAT_RGB888)
libGL error: failed to load driver: r300
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
driver: x11
found 1 display(s)
I: 1440x900 (fullscreen: yes)
I: got 0 bits of stencil
I: got 24 bits of depth buffer
I: got double buffer
I: got 8 bits for red
I: got 8 bits for green
I: got 8 bits for blue
I: got 0 bits for alpha
I: got multisample disabled
I: got 0 multisample buffers
GL_VENDOR: VMware, Inc.
GL_RENDERER: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
GL_VERSION: 2.1 Mesa 10.0.2
GL_EXTENSIONS: GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax
GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object
GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip
GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters
GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap
GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB
GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat
GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord
GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_lod_bias
GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection
GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp
GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture
GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3
GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp
GL_NV_fog_distance GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program
GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers
GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert
GL_MESA_ycbcr_texture GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow
GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync
GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate
GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object
GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_ATI_texture_compression_3dc
GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc
GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent
GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_packed_depth_stencil GL_ARB_vertex_array_object
GL_ATI_separate_stencil GL_ATI_texture_mirror_once GL_EXT_draw_buffers2 GL_EXT_draw_instanced
GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_compression_latc GL_EXT_texture_integer
GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_MESA_texture_array GL_ARB_copy_buffer
GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays
GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle
GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_conservative_depth GL_AMD_draw_buffers_blend
GL_AMD_seamless_cubemap_per_texture GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output
GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location
GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sampler_objects GL_ARB_seamless_cube_map
GL_ARB_shader_texture_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev
GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_ARB_get_program_binary
GL_ARB_robustness GL_ARB_shader_bit_encoding GL_ARB_timer_query GL_ARB_transform_feedback2
GL_ARB_transform_feedback3 GL_NV_vdpau_interop GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5
GL_ARB_conservative_depth GL_ARB_internalformat_uery GL_ARB_shading_language_420pack
GL_ARB_shading_language_packing GL_ARB_texture_storage GL_ARB_transform_feedback_instanced
GL_EXT_transform_feedback GL_ARB_invalidate_subdata GL_ARB_vertex_attrib_binding GL_KHR_debug
GL_ARB_texture_mirror_clamp_to_edge GL_ARB_vertex_type_10f_11f_11f_rev
OpenGL version detected: 2.1found GL_ARB_multitexture
found GL_ARB_texture_compression
found GL_ARB_texture_non_power_of_two
using GL_ARB_texture_non_power_of_two
GL_EXT_texture_filter_anisotropic not found
found GL_EXT_texture_lod_bias
found GL_ARB_vertex_buffer_object
using GL_ARB_vertex_buffer_object
max vertex buffer size: 3000
found GL_ARB_fragment_shader
found GL_ARB_shading_language_100
GLSL version guaranteed to be supported by OpenGL implementation postfixed by vender supplied info: 1.30
found GL_###_framebuffer_object
using GL_ARB_framebuffer_object
max draw buffers: 8
max render buffer size: 8192
max color attachments: 8
found GL_###_draw_buffers
using GL_ARB_draw_buffers
max supported vertex texture units: 16
max supported lights: 8
max texture units: 8
max texture coords: 8
max vertex attributes: 16
max varying floats: 128
max fragment uniform components: 16384
max vertex uniform components: 16384
max texture size: detected 8192
...but using 2048 as requested
Using low resolution globe textures as requested.
R_LoadProgram: 'world_low' loaded.
R_LoadProgram: 'model_low' loaded.
R_LoadProgram: 'warp' loaded.
R_LoadProgram: 'geoscape' loaded.
R_LoadProgram: 'combine2' loaded.
R_LoadProgram: 'convolve3' loaded.
R_LoadProgram: 'atmosphere' loaded.
R_LoadProgram: 'simple_glow' loaded.
SDL_ttf version 2.0.12 - we need at least 2.0.7
------- sound initialization -------
Failed to create secure directory (/run/user/1000/pulse): Permission denied
SDL_mixer version: 2.0.0
... requested audio rate: 44100
Failed to create secure directory (/run/user/1000/pulse): Permission denied
... available audio driver pulseaudio
... available audio driver alsa
... available audio driver dsp
... available audio driver disk
... available audio driver dummy
... actual audio driver: alsa
... audio rate: 44100
... audio channels: 2
... loaded ogg vorbis support
------- input initialization -------
0 possible joysticks
no joystick found.
Allocate 3 megabytes for the ui hunk
------- web initialization ---------
... web access not yet configured
----------- parse scripts ----------
60 script files
59 ui script files
UI_ParseNodeBody: Command name for confunc
'hud_default.soldier.soldier_opts.soldier_buttons.headgear_bg.deselect_headgear' already registered
UI_ParseNodeBody: Command name for confunc
'hud_default.soldier.soldier_opts.soldier_buttons.headgear_bg.disable_headgear' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.soldier_opts.soldier_buttons.deselect_stand'
already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.soldier_opts.soldier_buttons.deselect_crouch'
already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.soldier_opts.soldier_buttons.disable_stand' already
registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.soldier_opts.soldier_buttons.disable_crouch'
already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.deselect_primaryleft' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.deselect_primaryright' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.deselect_reloadleft' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.deselect_reloadright' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.disable_primaryleft' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.disable_primaryright' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.disable_reloadleft' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.disable_reloadright' already registered
UI_ParseNodeBody: Command name for confunc 'singleplayermission.check_if_in_campaign_mode' already registered
Shared Client/Server Info loaded
...123 items parsed
... 32 damage types parsed
... 32 equipment definitions parsed
... 10 inventory definitions parsed
... 25 team definitions parsed
executing keys.cfg
UI_SetKeyBinding: node "employees.employee_list@pageUp" not found.
UI_SetKeyBinding: node "employees.employee_list@pageDown" not found.
UI_SetKeyBinding: node "employees.employee_list@moveUp" not found.
UI_SetKeyBinding: node "employees.employee_list@moveDown" not found.
UI_SetKeyBinding: node "employees.employee_list@moveHome" not found.
UI_SetKeyBinding: node "employees.employee_list@moveEnd" not found.
UI_SetKeyBinding: node "sequence.next" not found.
Music: track changed from to van_theme.
executing autoexec.cfg
"version" is "UFO: Alien Invasion 2.6-dev IA-32 Jan 25 2014 Linux RELEASE"
79 static models loaded
CL_LanguageInit: language settings are stored in configuration: en
...using language: en_GB.utf8
SDL_ttf version 2.0.12 - we need at least 2.0.7
...registering 14 fonts
----------- parse msgids -----------
18 msgid files
no translation for ufo_carrier_txt
no translation for ufo_ripper_txt
no translation for ufo_mothership_txt
no translation for mail_ufocarrier
no translation for ugv_phoenix_txt
no translation for ugv_ares_w_txt
no translation for ugv_chaingun_txt
no translation for ugv_chaingun_belt_txt
no translation for ugv_weapon_autocannon_txt
no translation for ugv_weapon_autocannon_pre_txt
no translation for vhs_assault_txt
no translation for xaw95_txt
no translation for bombkit1_txt
no translation for chaingun_txt
----------- game modes -------------
added _Multiplayer
added _Campaign
added _Skirmish
added 3 game modes
====== UFO Initialized ======
=============================
Switch grab input off
Wrote config.cfg.
Wrote keys.cfg
recursive shutdown
Error: Received signal 11.
xinit: connection to X server lost
waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
libGL error: failed to load driver: r300
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
caught my eye so I ran
LIBGL_DEBUG=verbose xinit /usr/bin/xterm -- :1
and in the resulting terminal a
glxinfo | grep render
which gave me:
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/r300_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/r300_dri.so
libGL: driver does not expose __driDriverGetExtensions_r300():
/usr/lib/xorg/modules/dri/r300_dri.so: undefined symbol:
__driDriverGetExtensions_r300
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: r300
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
libGL: driver does not expose __driDriverGetExtensions_swrast():
/usr/lib/xorg/modules/dri/swrast_dri.so: undefined symbol:
__driDriverGetExtensions_swrast
libGL: Can't open configuration file /home/dok/.drirc: No such file or
directory.
libGL: Can't open configuration file /home/dok/.drirc: No such file or
directory.
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fog_distance,
and an Xorg.0.log
[ 2185.905]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2185.905] X Protocol Version 11, Revision 0
[ 2185.906] Build Operating System: Linux 3.12.5-1-ARCH i686
[ 2185.906] Current Operating System: Linux archdesk 3.12.9-1-ARCH #1 SMP PREEMPT Sun Jan 26 09:15:23 CET 2014 i686
[ 2185.906] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=99a6d650-3886-4252-8ded-db4a892400e2 rw quiet
[ 2185.907] Build Date: 09 January 2014 09:32:33AM
[ 2185.907]
[ 2185.907] Current version of pixman: 0.32.4
[ 2185.907] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2185.907] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2185.908] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Jan 26 16:35:29 2014
[ 2185.909] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2185.909] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2185.909] (==) No Layout section. Using the first Screen section.
[ 2185.909] (==) No screen section available. Using defaults.
[ 2185.909] (**) |-->Screen "Default Screen Section" (0)
[ 2185.909] (**) | |-->Monitor "<default monitor>"
[ 2185.911] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2185.911] (==) Automatically adding devices
[ 2185.911] (==) Automatically enabling devices
[ 2185.911] (==) Automatically adding GPU devices
[ 2185.911] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2185.911] Entry deleted from font path.
[ 2185.912] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2185.912] Entry deleted from font path.
[ 2185.912] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2185.912] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2185.912] Entry deleted from font path.
[ 2185.912] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2185.912] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 2185.912] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2185.912] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2185.912] (II) Loader magic: 0x8265660
[ 2185.912] (II) Module ABI versions:
[ 2185.912] X.Org ANSI C Emulation: 0.4
[ 2185.912] X.Org Video Driver: 15.0
[ 2185.912] X.Org XInput driver : 20.0
[ 2185.912] X.Org Server Extension : 8.0
[ 2185.913] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2185.915] setversion 1.4 failed: Permission denied
[ 2185.918] (--) PCI:*(0:1:0:0) 1002:7280:17af:2172 rev 154, Mem @ 0xe0000000/268435456, 0xfdff0000/65536, I/O @ 0x0000bc00/256, BIOS @ 0x????????/131072
[ 2185.918] (--) PCI: (0:1:0:1) 1002:72a0:17af:2173 rev 154, Mem @ 0xfdfe0000/65536
[ 2185.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2185.926] Initializing built-in extension Generic Event Extension
[ 2185.927] Initializing built-in extension SHAPE
[ 2185.927] Initializing built-in extension MIT-SHM
[ 2185.927] Initializing built-in extension XInputExtension
[ 2185.927] Initializing built-in extension XTEST
[ 2185.927] Initializing built-in extension BIG-REQUESTS
[ 2185.927] Initializing built-in extension SYNC
[ 2185.927] Initializing built-in extension XKEYBOARD
[ 2185.927] Initializing built-in extension XC-MISC
[ 2185.928] Initializing built-in extension SECURITY
[ 2185.928] Initializing built-in extension XINERAMA
[ 2185.928] Initializing built-in extension XFIXES
[ 2185.928] Initializing built-in extension RENDER
[ 2185.928] Initializing built-in extension RANDR
[ 2185.928] Initializing built-in extension COMPOSITE
[ 2185.928] Initializing built-in extension DAMAGE
[ 2185.928] Initializing built-in extension MIT-SCREEN-SAVER
[ 2185.928] Initializing built-in extension DOUBLE-BUFFER
[ 2185.928] Initializing built-in extension RECORD
[ 2185.929] Initializing built-in extension DPMS
[ 2185.929] Initializing built-in extension Present
[ 2185.929] Initializing built-in extension DRI3
[ 2185.929] Initializing built-in extension X-Resource
[ 2185.929] Initializing built-in extension XVideo
[ 2185.929] Initializing built-in extension XVideo-MotionCompensation
[ 2185.929] Initializing built-in extension XFree86-VidModeExtension
[ 2185.929] Initializing built-in extension XFree86-DGA
[ 2185.929] Initializing built-in extension XFree86-DRI
[ 2185.930] Initializing built-in extension DRI2
[ 2185.930] (II) "glx" will be loaded by default.
[ 2185.930] (II) LoadModule: "dri2"
[ 2185.930] (II) Module "dri2" already built-in
[ 2185.930] (II) LoadModule: "glamoregl"
[ 2185.930] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2185.948] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2185.949] compiled for 1.15.0, module version = 0.6.0
[ 2185.949] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2185.949] (II) LoadModule: "glx"
[ 2185.949] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2185.950] (II) Module glx: vendor="X.Org Foundation"
[ 2185.950] compiled for 1.15.0, module version = 1.0.0
[ 2185.950] ABI class: X.Org Server Extension, version 8.0
[ 2185.950] (==) AIGLX enabled
[ 2185.950] Loading extension GLX
[ 2185.950] (==) Matched ati as autoconfigured driver 0
[ 2185.950] (==) Matched modesetting as autoconfigured driver 1
[ 2185.950] (==) Matched fbdev as autoconfigured driver 2
[ 2185.950] (==) Matched vesa as autoconfigured driver 3
[ 2185.950] (==) Assigned the driver to the xf86ConfigLayout
[ 2185.950] (II) LoadModule: "ati"
[ 2185.951] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 2185.951] (II) Module ati: vendor="X.Org Foundation"
[ 2185.951] compiled for 1.15.0, module version = 7.3.0
[ 2185.951] Module class: X.Org Video Driver
[ 2185.951] ABI class: X.Org Video Driver, version 15.0
[ 2185.951] (II) LoadModule: "radeon"
[ 2185.951] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 2185.952] (II) Module radeon: vendor="X.Org Foundation"
[ 2185.952] compiled for 1.15.0, module version = 7.3.0
[ 2185.952] Module class: X.Org Video Driver
[ 2185.952] ABI class: X.Org Video Driver, version 15.0
[ 2185.952] (II) LoadModule: "modesetting"
[ 2185.958] (WW) Warning, couldn't open module modesetting
[ 2185.958] (II) UnloadModule: "modesetting"
[ 2185.958] (II) Unloading modesetting
[ 2185.958] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2185.958] (II) LoadModule: "fbdev"
[ 2185.958] (WW) Warning, couldn't open module fbdev
[ 2185.958] (II) UnloadModule: "fbdev"
[ 2185.958] (II) Unloading fbdev
[ 2185.958] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2185.958] (II) LoadModule: "vesa"
[ 2185.958] (WW) Warning, couldn't open module vesa
[ 2185.958] (II) UnloadModule: "vesa"
[ 2185.958] (II) Unloading vesa
[ 2185.958] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2185.958] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 2185.974] (--) using VT number 2
[ 2186.554] (II) [KMS] Kernel modesetting enabled.
[ 2186.554] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2186.554] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 2186.554] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2186.554] (==) RADEON(0): Default visual is TrueColor
[ 2186.554] (==) RADEON(0): RGB weight 888
[ 2186.554] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 2186.554] (--) RADEON(0): Chipset: "ATI Radeon X1950" (ChipID = 0x7280)
[ 2186.554] (II) Loading sub module "dri2"
[ 2186.554] (II) LoadModule: "dri2"
[ 2186.554] (II) Module "dri2" already built-in
[ 2186.554] (II) Loading sub module "exa"
[ 2186.554] (II) LoadModule: "exa"
[ 2186.555] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2186.555] (II) Module exa: vendor="X.Org Foundation"
[ 2186.555] compiled for 1.15.0, module version = 2.6.0
[ 2186.555] ABI class: X.Org Video Driver, version 15.0
[ 2186.555] (II) RADEON(0): KMS Color Tiling: enabled
[ 2186.555] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 2186.555] (II) RADEON(0): KMS Pageflipping: enabled
[ 2186.555] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 2186.596] (II) RADEON(0): Output DVI-0 has no monitor section
[ 2186.636] (II) RADEON(0): Output S-video has no monitor section
[ 2186.672] (II) RADEON(0): Output DVI-1 has no monitor section
[ 2186.713] (II) RADEON(0): EDID for output DVI-0
[ 2186.753] (II) RADEON(0): EDID for output S-video
[ 2186.789] (II) RADEON(0): EDID for output DVI-1
[ 2186.789] (II) RADEON(0): Manufacturer: HWP Model: 2827 Serial#: 16843009
[ 2186.789] (II) RADEON(0): Year: 2009 Week: 20
[ 2186.789] (II) RADEON(0): EDID Version: 1.3
[ 2186.789] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2186.789] (II) RADEON(0): Sync: Separate
[ 2186.789] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 2186.789] (II) RADEON(0): Gamma: 2.20
[ 2186.789] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2186.789] (II) RADEON(0): Default color space is primary color space
[ 2186.789] (II) RADEON(0): First detailed timing is preferred mode
[ 2186.789] (II) RADEON(0): redX: 0.650 redY: 0.335 greenX: 0.295 greenY: 0.605
[ 2186.790] (II) RADEON(0): blueX: 0.145 blueY: 0.075 whiteX: 0.313 whiteY: 0.329
[ 2186.790] (II) RADEON(0): Supported established timings:
[ 2186.790] (II) RADEON(0): 720x400@70Hz
[ 2186.790] (II) RADEON(0): 640x480@60Hz
[ 2186.790] (II) RADEON(0): 800x600@60Hz
[ 2186.790] (II) RADEON(0): 1024x768@60Hz
[ 2186.790] (II) RADEON(0): Manufacturer's mask: 0
[ 2186.790] (II) RADEON(0): Supported standard timings:
[ 2186.790] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2186.790] (II) RADEON(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2186.790] (II) RADEON(0): Supported detailed timing:
[ 2186.790] (II) RADEON(0): clock: 108.0 MHz Image Size: 442 x 249 mm
[ 2186.790] (II) RADEON(0): h_active: 1600 h_sync: 1624 h_sync_end 1704 h_blank_end 1800 h_border: 0
[ 2186.790] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 1000 v_border: 0
[ 2186.790] (II) RADEON(0): Ranges: V min: 48 V max: 76 Hz, H min: 24 H max: 85 kHz, PixClock max 175 MHz
[ 2186.790] (II) RADEON(0): Monitor name: HP 2009
[ 2186.790] (II) RADEON(0): Serial No: CNC9200VZ4
[ 2186.790] (II) RADEON(0): EDID (in hex):
[ 2186.790] (II) RADEON(0): 00ffffffffffff0022f0272801010101
[ 2186.790] (II) RADEON(0): 14130103682c1978eeb815a6554b9b25
[ 2186.790] (II) RADEON(0): 135054a1080081809500010101010101
[ 2186.790] (II) RADEON(0): 010101010101302a40c8608464301850
[ 2186.790] (II) RADEON(0): 1300baf91000001e000000fd00304c18
[ 2186.790] (II) RADEON(0): 5511000a202020202020000000fc0048
[ 2186.790] (II) RADEON(0): 5020323030390a2020202020000000ff
[ 2186.790] (II) RADEON(0): 00434e4339323030565a340a202000a2
[ 2186.790] (II) RADEON(0): Printing probed modes for output DVI-1
[ 2186.790] (II) RADEON(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[ 2186.790] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2186.790] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2186.791] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2186.791] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2186.791] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2186.791] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2186.791] (II) RADEON(0): Output DVI-0 disconnected
[ 2186.791] (II) RADEON(0): Output S-video disconnected
[ 2186.791] (II) RADEON(0): Output DVI-1 connected
[ 2186.791] (II) RADEON(0): Using exact sizes for initial modes
[ 2186.791] (II) RADEON(0): Output DVI-1 using initial mode 1600x900
[ 2186.791] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2186.791] (II) RADEON(0): mem size init: gart size :7dff000 vram size: s:20000000 visible:1fa41000
[ 2186.791] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 2186.791] (==) RADEON(0): DPI set to (96, 96)
[ 2186.791] (II) Loading sub module "fb"
[ 2186.791] (II) LoadModule: "fb"
[ 2186.792] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2186.792] (II) Module fb: vendor="X.Org Foundation"
[ 2186.792] compiled for 1.15.0, module version = 1.0.0
[ 2186.793] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2186.793] (II) Loading sub module "ramdac"
[ 2186.793] (II) LoadModule: "ramdac"
[ 2186.793] (II) Module "ramdac" already built-in
[ 2186.793] (--) Depth 24 pixmap format is 32 bpp
[ 2186.793] (II) RADEON(0): [DRI2] Setup complete
[ 2186.793] (II) RADEON(0): [DRI2] DRI driver: r300
[ 2186.793] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 2186.793] (II) RADEON(0): Front buffer size: 5700K
[ 2186.793] (II) RADEON(0): VRAM usage limit set to 461404K
[ 2186.794] (==) RADEON(0): Backing store enabled
[ 2186.794] (II) RADEON(0): Direct rendering enabled
[ 2186.794] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 2186.794] (II) EXA(0): Driver allocated offscreen pixmaps
[ 2186.794] (II) EXA(0): Driver registered support for the following operations:
[ 2186.794] (II) Solid
[ 2186.794] (II) Copy
[ 2186.794] (II) Composite (RENDER acceleration)
[ 2186.794] (II) UploadToScreen
[ 2186.794] (II) DownloadFromScreen
[ 2186.794] (II) RADEON(0): Acceleration enabled
[ 2186.794] (==) RADEON(0): DPMS enabled
[ 2186.794] (==) RADEON(0): Silken mouse enabled
[ 2186.794] (II) RADEON(0): Set up textured video
[ 2186.794] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 2186.794] (II) RADEON(0): [XvMC] Extension initialized.
[ 2186.794] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2186.797] (--) RandR disabled
[ 2186.840] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2186.840] (II) AIGLX: enabled GLX_ARB_create_context
[ 2186.840] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2186.840] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2186.840] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2186.840] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2186.840] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2186.840] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2186.840] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2186.841] (II) AIGLX: Loaded and initialized r300
[ 2186.841] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2186.842] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 2186.916] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2186.916] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2186.916] (II) LoadModule: "evdev"
[ 2186.916] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2186.916] (II) Module evdev: vendor="X.Org Foundation"
[ 2186.916] compiled for 1.15.0, module version = 2.8.2
[ 2186.916] Module class: X.Org XInput Driver
[ 2186.916] ABI class: X.Org XInput driver, version 20.0
[ 2186.916] (II) Using input driver 'evdev' for 'Power Button'
[ 2186.916] (**) Power Button: always reports core events
[ 2186.916] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2186.916] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2186.916] (--) evdev: Power Button: Found keys
[ 2186.916] (II) evdev: Power Button: Configuring as keyboard
[ 2186.916] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 2186.916] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2186.916] (**) Option "xkb_rules" "evdev"
[ 2186.916] (**) Option "xkb_model" "pc104"
[ 2186.916] (**) Option "xkb_layout" "us"
[ 2186.955] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2186.955] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2186.955] (II) Using input driver 'evdev' for 'Power Button'
[ 2186.955] (**) Power Button: always reports core events
[ 2186.955] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2186.955] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2186.955] (--) evdev: Power Button: Found keys
[ 2186.955] (II) evdev: Power Button: Configuring as keyboard
[ 2186.955] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
[ 2186.955] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2186.955] (**) Option "xkb_rules" "evdev"
[ 2186.955] (**) Option "xkb_model" "pc104"
[ 2186.955] (**) Option "xkb_layout" "us"
[ 2186.956] (II) config/udev: Adding input device Afatech DVB-T 2 (/dev/input/event1)
[ 2186.956] (**) Afatech DVB-T 2: Applying InputClass "evdev keyboard catchall"
[ 2186.956] (II) Using input driver 'evdev' for 'Afatech DVB-T 2'
[ 2186.956] (**) Afatech DVB-T 2: always reports core events
[ 2186.956] (**) evdev: Afatech DVB-T 2: Device: "/dev/input/event1"
[ 2186.956] (--) evdev: Afatech DVB-T 2: Vendor 0x1b80 Product 0xe399
[ 2186.956] (--) evdev: Afatech DVB-T 2: Found keys
[ 2186.956] (II) evdev: Afatech DVB-T 2: Configuring as keyboard
[ 2186.956] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.2/usb2/2-5/2-5:1.1/input/input2/event1"
[ 2186.956] (II) XINPUT: Adding extended input device "Afatech DVB-T 2" (type: KEYBOARD, id 8)
[ 2186.956] (**) Option "xkb_rules" "evdev"
[ 2186.956] (**) Option "xkb_model" "pc104"
[ 2186.956] (**) Option "xkb_layout" "us"
[ 2186.957] (II) config/udev: Adding input device KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) (/dev/input/event6)
[ 2186.957] (**) KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Applying InputClass "evdev keyboard catchall"
[ 2186.957] (II) Using input driver 'evdev' for 'KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)'
[ 2186.957] (**) KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): always reports core events
[ 2186.957] (**) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Device: "/dev/input/event6"
[ 2186.957] (--) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Vendor 0x1b80 Product 0xe399
[ 2186.957] (--) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Found keys
[ 2186.957] (II) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Configuring as keyboard
[ 2186.957] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.2/usb2/2-5/rc/rc0/input7/event6"
[ 2186.957] (II) XINPUT: Adding extended input device "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)" (type: KEYBOARD, id 9)
[ 2186.957] (**) Option "xkb_rules" "evdev"
[ 2186.957] (**) Option "xkb_model" "pc104"
[ 2186.957] (**) Option "xkb_layout" "us"
[ 2186.957] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2186.957] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2186.958] setversion 1.4 failed: Permission denied
[ 2186.958] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2186.958] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2186.958] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2186.958] (**) AT Translated Set 2 keyboard: always reports core events
[ 2186.958] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2186.958] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2186.958] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2186.958] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2186.958] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2186.958] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 2186.958] (**) Option "xkb_rules" "evdev"
[ 2186.958] (**) Option "xkb_model" "pc104"
[ 2186.958] (**) Option "xkb_layout" "us"
[ 2186.959] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 2186.959] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 2186.959] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 2186.959] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 2186.959] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 2186.959] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 2186.959] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2186.959] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[ 2186.959] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 11)
[ 2186.959] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 2186.960] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 2186.960] (II) No input driver specified, ignoring this device.
[ 2186.960] (II) This device may have been added with another device file.
[ 2186.960] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2186.960] (II) No input driver specified, ignoring this device.
[ 2186.960] (II) This device may have been added with another device file.
[ 2192.987] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: Afatech DVB-T 2: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: Power Button: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: Power Button: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2193.034] (EE) Server terminated successfully (0). Closing log file.
when I run those xinit commands as root I get good screens with proper outputs.
I've tried to run the script from https://wiki.archlinux.org/index.php/Ru … _X_display
and another script which I've used in the past
#!/bin/bash
xinit /dev/stdin -- :1 vt8 -ac -depth 24 <<EOF
xrandr --output LVDS1 --mode 1400x900 -d :1
/usr/bin/ufo
EOF
I have to say that I'm stuck.
pacman -Ss xf86-video | grep installed
gives:
extra/xf86-video-ati 1:7.3.0-1 (xorg-drivers xorg) [installed]
If I run the game on an established screen, there is no problem. What can I do? Is it safe to run xinit as root?
Thanks
EDIT SOLVED:
Ok, so it seems I was close. This is what works for me:
Go to a virtual terminal, let's say vt1 and login as your user:
xinit /usr/bin/ufo -- :1 vt1
The command can be run from an existing session or from the vt itself. The "trick" is to do with session permissions, it's important to be logged in to the virtual terminal as a user with X permissions. This is info missing from the wiki pages.
Last edited by jackwild (2014-01-28 03:20:26)tomk wrote:Directories have to be executable - yours wasn't.
Thanks. Hadn't thought about that.
ngoonee wrote:You probably ran (or had a bad package/script run) chmod 666 -R on your ~/
Maybe. Tried to retrace my steps to figure out what I did, but because I did it at work I did everything in like five-minute-pieces, getting distracted all the time. The only thing I can think of that actually touched the folder at installation time was the "sakura" community package, though I don't believe that it would do something like that. I'll try to do it again when I'm at work though. Just to make sure.
Thanks anyway for your input. -
Select permission denied in RPD
I am mapping data in my rpd file and cannot view data or update row counts for almost all of my tables in the database.
I am running obiee 11g on my local machine connected to an sql server database.
The error I receive is "Select permission denied on object...". I have talked with the DBA and I should have sufficient privileges for my project.
Any help would be greatly appreciated.
Thanks,
MikeYes Venkat is right,You don't have privileges for that table,You can always find out your own effective permission on any object by using fn_my_permissions('table_name', 'OBJECT')
Mark if helps.
Thanks, -
EXECUTE permission denied on object 'xp_sqlagent_enum_jobs'
Hello. I am running SQL 2005 SP2 (9.0.3282) on a Windows 2003 SP2 Enterprise server. I have three users that I have assigned the three SQL Server Agent roles within the msdb system database so that they may manage jobs that they own. Recently they started seeing this error:
The EXECUTE permission was denied on the object 'xp_sqlagent_enum_jobs', dartabase 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229)
I have other servers that have SQL server configured the same where we are not seeing the errors.
Any assistance would be greatly appreciated.
Thanks.
Kris
After you move the msdb database, you may receive the following error message:
Error 229: EXECUTE permission denied on object 'ObjectName', database 'master', owner 'dbo'.
This problem occurs because the ownership chain has been broken. The database owners for the msdb database and for the master database are not the same. In this case, the ownership of the msdb database had been changed. To work around this problem, run the following Transact-SQL statements. You can do this by using the Osql.exe command-line utility (SQL Server 7.0 and SQL Server 2000) or the Sqlcmd.exe command-line utility (SQL Server 2005):
USE MSDB Go EXEC sp_changedbowner 'sa' Go
http://support.microsoft.com/kb/224071
INF: Object Ownership Chain Checking Across Databases Depends on the Login That Is Mapped to the Object Owners| Sankar Reddy | http://sankarreddy.spaces.live.com/ | -
Bakup Error. errno 13: Permission denied
Hi All, we are having problems with our backups. This happen somedays, in general they work perfectly but sometimes they simply crash.
BR0280I BRCONNECT time stamp: 2008-06-20 08.10.54
BR0280I BRBACKUP time stamp: 2008-06-20 08.37.24
BR0134W Unattended mode with 'force' active - no operator confirmation allowed
BR0261E BRBACKUP cancelled by signal 2
BR0252W Function remove() failed for 'E:\oracle\MIS\sapbackup\.bdyemggv.lst' at location BrCleanup-6
BR0253W errno 13: Permission denied
BR0280I BRBACKUP time stamp: 2008-06-20 08.37.27
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0280I BRBACKUP time stamp: 2008-06-20 08.37.27
BR0317I 'Alter tablespace PSAPSR3700 end backup' successful
BR0280I BRBACKUP time stamp: 2008-06-20 08.37.27
BR0317I 'Alter tablespace SYSAUX end backup' successful
BR0280I BRBACKUP time stamp: 2008-06-20 08.37.27
BR0317I 'Alter tablespace SYSTEM end backup' successful
BR0056I End of database backup: bdyemggv.fnf 2008-06-20 08.37
BR0280I BRBACKUP time stamp: 2008-06-20 08.37.27
BR0054I BRBACKUP terminated with errors
This is our infrastructure:
Windows 2003 Server.
Oracle 10G
SAP ECC 6.0
Legato Networker
Please some tips.
Best Regards,
Erick ILarrazaHi All, thanks a lot for your reply.
Karan , In our case the problem is with the file: E:\oracle\MIS\sapbackup\.bdyemggv.lst'
I look into the directory E:\oracle\MIS\sapbackup the following groups have authorizations over the folder:
Administrators (<SID>ADM, SAPSERVICE<SID>)
ORA_DBA
ORA_MIQ_OPER
ORA_MIQ_DBA
SYSTEM
Authorizations:
Full Control
Modify
Read & Execute
Read
Write
In the case of the database directory only the Administrators, SYSTEM, and Authenticated users.
Full Control
Modify
Read & Execute
Read
Write
Sergo , the user SAPService<SID> belong to the group administrators that has the following authorizations on the folder:
Full Control
Modify
Read & Execute
Read
Write
Our server is AMD 64.
At the end of the backup log you can see this:
BR0056I End of database backup: bdyefrwd.fnf 2008-06-18 21.10.41
BR0280I BRBACKUP time stamp: 2008-06-18 21.10.43
BR0054I BRBACKUP terminated with errors
If you see it with the DB12 transaction you could see all in RED. Return Code 0005, I think this means that the backup crashu2026
The Backup is ONLINE.
Sev , we have BRTOOLS 7.0 our problem is with the file: E:\oracle\MIS\sapbackup\.bdyemggv.lst'
Markus, Our systems are confgured with Legato Networker. Can i run the backups with the DB13 transaction without change the configuration? Who will drive the Backup Library? And the robot...
Best Regards,
Erick ILarraza -
PERMISSION DENIED IN FTP SERVER
Hi all,
i have XML to XML scenario. i have put xi_input.xml in my system and made delete mode in sender communication channel. but its not picking and deleting the data, its giving error in FTP serve as "permission denied" and in runtime work bench error is "Failed to delete file 'xi_input.txt' after processing. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Permission denied'. For details, contact your FTP server vendor.". please help me
thanks and regards>
pawan kumar wrote:
i m getting output XML file in my system.but i tried with directly one to one mapping in message mapping, now i did some modification in Message mapping like i concatenate name by X in message mapping and in description i passed ZSUBHODIP as constant then in output i am not getting concatenateed value and constant ZSUBHODIP in name and description.
Hi,
Did you activate the message mapping after modification ??
If yes, test the mapping in test tab and let us know the exact error.
Regards,
Chandra -
Make: execvp: /usr/bin: Permission denied[SOLVED]
hey, I'm trying to install an app called jconv.
I get this error:
make: execvp: /usr/bin: Permission denied
here is the make file..(don't have the first clue on making a PKGBUILD)
# Copyright (C) 2005-2007 Fons Adriaensen <[email protected]>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
PREFIX = /usr
SUFFIX := $(shell uname -m | sed -e 's/^unknown/$//' -e 's/^i.86/$//' -e 's/^x86_64/$/64/')
LIBDIR = lib$(SUFFIX)
DISTDIR = jconv-$(VERSION)
VERSION = 0.2.0
LDFLAGS += -L$(PREFIX)/$(LIBDIR)
CPPFLAGS += -O3 -Wall -MMD -MP -DVERSION=\"$(VERSION)\"
#CPPFLAGS += -march=i686 -mtune=pentium4 -msse -msse2 -m3dnow -O3 -ffast-math
# Uncomment if you use a libsndfile version without support for setting/getting the Ambisonic flags.
CPPFLAGS += -DNOAMBIS=1
all: jconv fconv mkwavex
JCONV_O = jconv.o config.o jconfig.o jclient.o
jconv: LDLIBS += -lzita-convolver -lfftw3f -lsndfile -lclthreads -ljack -lpthread -lrt
jconv: $(JCONV_O)
g++ $(LDFLAGS) -o $@ $(JCONV_O) $(LDLIBS)
$(JCONV_O):
-include $(JCONV_O:%.o=%.d)
FCONV_O = fconv.o config.o fconfig.o
fconv: LDLIBS += -lzita-convolver -lfftw3f -lsndfile -lpthread -lrt
fconv: $(FCONV_O)
g++ $(LDFLAGS) -o $@ $(FCONV_O) $(LDLIBS)
$(FCONV_O):
-include $(FCONV_O:%.o=%.d)
MKWAVEX_O = mkwavex.o impdata.o
mkwavex : LDLIBS += -lsndfile -lrt
mkwavex: $(MKWAVEX_O)
g++ $(LDFLAGS) -o $@ $(MKWAVEX_O) $(LDLIBS)
install: jconv fconv mkwavex
/usr/bin/install -m 755 jconv $(PREFIX)/bin
/usr/bin/install -m 755 fconv $(PREFIX)/bin
/usr/bin/install -m 755 mkwavex $(PREFIX)/bin
clean:
/bin/rm -f *~ *.o *.a *.d *.so jconv fconv
Last edited by funkmuscle (2008-10-23 21:51:15)Thanx Chok. I know that. That's why I'm posting this. This app was make for debian so it's something to do with:
install: jconv fconv mkwavex
/usr/bin/install -m 755 jconv $(PREFIX)/bin
/usr/bin/install -m 755 fconv $(PREFIX)/bin
/usr/bin/install -m 755 mkwavex $(PREFIX)/bin
solved...I removed [/usr/bin/install -m 755] and replaced with [install]
so it looked like this:
install $(PREFIX)/bin
Last edited by funkmuscle (2008-10-23 21:50:26) -
Hi Experts,
When i try to logon SAPNET from T/Code OSS1 its througing error as
"sapsrv2a: route permission denied(12.34.23.5 to oss1 sapdp01)
Location SAPoruter 37.15 on sapserv2a
Component NI
Release 640
Version 37
Return Code -93
Counter 5
Kindly suggest any solution for this problem
Thanks in Advance,
RamamurthyHI
I have this error too if I try to logon to sapnet with OSS1 transaction.
you must logon to sapnet trought internet explorer http://service.sap.com
Note 33135 - Guidelines for OSS1
Note Language: Version: 15 Validity: valid since 30.06.2006
PDF Download Corrections Compare Versions SSCR
Go to SAP Note: Display
Content: Summary | Header Data | Releases | Related Notes
Summary
Symptom
You are using transaction OSS1 to establish a remote connection.
Other terms
OSS1, RFC connections to SAPNet - R/3 Frontend, SAPOSS, OSS_RFC, SAProuter
Reason and Prerequisites
Remote connection to SAP, R/3 system
Solution
On April 03, 2006, SAPNet - R/3 Frontend was deactivated as a user interface. SAPNet - R/3 Frontend, which was introduced in 1995 as SAP's Online Service System (OSS), was SAP's first and, for a long time, its only support system, which customers worldwide accessed using transaction OSS1.
Today, the SAProuter connection via transaction OSS1 continues to be used for the following RFC connections:
- Transfer of EarlyWatch Alert data
- Exchange of data using the SAP Notes Assistant
To install and configure this transaction, proceed exactly as follows:
1. Making the technical settings for OSS1
You must configure transaction OSS1 before you can use it. Choose "Parameter" from the menu bar (-> Techn. Settings) and choose "Change".
The technical settings for transaction OSS1 are set by default to Walldorf (sapserv3) with the IP address 147.204.2.5. If this address does not correspond with the entry in your host file, choose the sapserv3 IP address that is valid for you by choosing the menu option "SAPRouter at SAP -> Walldorf".
Furthermore, enter your local SAPRouter information in the "SAPRouter 1" fields. Now save the settings.
After making these changes, the screen for the technical settings should be as follows:
Router data for the logon to SAPNet - R/3 Frontend
-Customer SAPRouters----
-SAPRouter 1---- -SAPRouter 2----
Name my_saprouter
Name
IP Address x.x.x.x
IP Address
Instanc No. 99
Instance No.
-SAPRouter and OSS Message Server at SAP----
-SAPRouter at SAP---- -OSS Message Server----
Name sapservX
Name oss001
IP Address x.x.x.x
DB Name O01
Instance No. 99
Instance No. 01
NOTE:
Replace sapservX with the following values:
sapserv1 (194.117.106.129) connection via Internet VPN
sapserv2 (194.39.131.34) connection via Internet SNC
sapserv3 (147.204.2.5) for customers with connection to Germany
sapserv4 (204.79.199.2) for customers in America
sapserv5 (194.39.138.2) for customers with connection to Japan
sapserv6 (194.39.139.16) for customers in Australia and New Zealand
sapserv7 (194.39.134.35) for customers in Asia
Choose "Start Logon to SAPNet - R/3 Frontend". If the system issues message S1 452, there are errors in the operating system configuration. In this case, see appendix A.
When you install an access authorization file "saprouttab", you should ensure that all of your front ends and R/3 servers can establish a connection to sapserv3, service sapdp99. Appendix E contains examples of saprouttabs. For more information on the SAPRouter, refer to the SAPRouter documentation (Note 30289).
Try it again until the dialog box "Please select a group" appears. If the dialog box "Please select a group" is displayed, the configuration for transaction OSS1 is correct. You can then proceed with the next section.
NOTE:
When you try to log on to SAPNet - R/3 Frontend, the system issues an error message indicating that you are no longer allowed to log on to SAPNet - R/3 Frontend.
2. Further questions?
As soon as you have carried out the steps described above, transaction OSS1 should connect you to the most efficient SAPNet - R/3 Frontend application server.
If you have further questions or problems, the file entitled "OSS1. TroubleShooting" contains additional information. If you have a problem that you cannot solve, contact our hotline: 0180/5 34 34 3-3.
Appendix A
If message S1 452 appears when you try to log on to SAPNet - R/3
Frontend with transaction OSS1, there is an incorrect setting somewhere (either in the technical settings for OSS1 or at operating system level).
To find out why the connection to the message server was unsuccessful, choose Tools (Case, Test ( Developer trace (transaction ST11). The trace contains an entry for dev_lg. This file contains the error log. The LOCATION line, if available, contains the host on which the error occurred. The problem description is found in the ERROR line. If you cannot find the entry dev_lg, check whether the program "lgtst" exists (see appendix B).
Examples of the contents of dev_lg:
ERROR partner not reached (host abc.def.gh.i, service sapdp99)
TIME Thu Aug 10 09:17:57 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -10
MODULE niuxi.c
LINE 773
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 1
Here, the system could not reach the SAPRouter. For example, no SAProuter could be found under service 99 (port 3299) on the host with the IP address abc.def.gh.i. The SAPRouter process does not work or the IP address was not configured correctly in OSS1.
ERROR service 'sapdp99' unknown
TIME Thu Aug 10 09:22:00 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 17
RC -3
MODULE niuxi.c
LINE 404
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
This message indicates that the service sapdp99 was not entered in /etc/services. Add the entry in /etc/services. This must be available on all R/3 servers and front ends.
LOCATION SapRouter on abc.def.gh.i
ERROR route permission denied (XXXXXXXX to sapservX, sapdp99)
TIME Thu Aug 10 09:37:44 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 17
RC -94
MODULE nixxrout.c
LINE 1426
COUNTER 1
The file saprouttab, which contains the valid connections, is not correct. The SAPRouter on the host abc.def.gh.i does not set up the connection to sapservX. Check the SAPRouter file saprouttab. This should contain every R/3 server and frontend (see also appendix E).
LOCATION SapRouter on abc.def.gh.i
ERROR internal error
TIME Thu Aug 10 10:50:18 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -93
MODULE niuxi.c
LINE 773
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 242
ERRNO TEXT No route to host
COUNTER 1
This error message indicates that the host abc.def.gh.i cannot process the IP address of the next host configured in OSS1. If the SAPRouter error message appears and the next host is sapservX, check the address for sapservX. OSS1 is delivered with the default settings sapserv3 and IP address 147.204.2.5. Customers in the U.S.A. are normally connected to sapserv4, IP address 204.79.199.2. If required, change the technical settings of OSS1 accordingly.
ERROR internal error
TIME Thu Nov 23 00:11:20 1995
RELEASE 21J
COMPONENT NI (network interface)
VERSION 15
RC -1
COUNTER 1
This message shows that the instance number entered does not agree with at least one of the technical settings for the SAPRouter defined in OSS1. The default for the instance number of the SAPRouter is 99. Under no circumstances should you enter the instance number of your R/3 system for the SAPRouter. You need to specify instance number 99 for sapservX. Otherwise, it is not possible to log on to SAPNet - R/3 Frontend.
LOCATION SapRouter on sapservX
ERROR route permission denied (XXXXXX to oss002, sapmsO01)
TIME Mon Nov 27 19:25:54 1995
RELEASE 30A
COMPONENT NI (network interface)
VERSION 15
RC -94
MODULE nixxrout.c
LINE 1390
COUNTER 1
An incorrect server was entered as message server 001, in this example, the server oss002. The message server for O01 is oss001. Change the technical settings for transaction OSS1 accordingly.
Appendix B (for Windows NT only)
Change to the directory "\usr\sap\<SID>\SYS\exe\run" and search for the program "lgtst.exe". If you cannot find it, or if the length of this file is not exactly 640216 bytes, import the program "lgtst.exe" from sapservX via ftp:
> ftp sapservX
Connected to sapservX.
220 sapservX FTP server (Version 1.7.194.2 Wed Sep 8 17:23:04 GMT 1993) ready.
Name: ftp
331 Guest login ok, send ident as password.
Password: <Your_customer_number>
ftp> cd dist/permanent/OSS1/lgtst.exe
250 CWD command successful.
ftp> binary
200 Type set to I.
ftp> get lgtst.exe
150 Opening BINARY mode data connection for lgtst.exe (640216 bytes).
226 Transfer complete.
640216 bytes received.
ftp> bye
Copy this file into the aforementioned directory.
Appendix C
The messages from transaction OSS1 (error messages and information) are given in the following list. Each message is described briefly.
|No.| Message Text
|450| Maintain technical settings first.
|452| Unable to connect to SAPNet - R/3 Frontend message server.
|454| E: Unable to start SAPGUI.
|455| SAPGUI was started.
|456| Specify a server name.
|457| Specify an IP address.
|458| Specify an instance number.
|459| Specify a database name.
|460| No authorization to log on to SAPNet - R/3 Frontend.
|461| No authorization to maintain technical settings.
|462| E: RFC destination could not be generated
Number 450: Maintain technical settings first
You can only log on to SAPNet - R/3 Frontend if the technical settings
are maintained. The technical settings determine the network path from the customer R/3 system to the online service system.
Number 452: Unable to connect to SAPNet - R/3 Frontend message server.
This message appears if the connection to the SAPNet - R/3 Frontend message server was not possible (system name O01, server oss001). There can be different reasons for this (see appendix A).
Number 454: E: Unable to start SAPGUI.
Transaction OSS1 could start the SAPGUI (not SAPTEMU), either because the program does not exist in the path given, or because the execute permission is not set correctly. Check whether the SAPGUI exists; SAPTEMU alone is not sufficient.
Number 455: SAPGUI was started.
This is not an error message. It merely informs you that an additional SAPGUI was started to establish a connection to SAPNet - R/3 Frontend.
Number 456: Specify a server name.
The server name was omitted from the technical settings.
Number 457: Specify an IP address.
The IP address was omitted from the technical settings.
Number 458: Specify an instance number.
The instance number was omitted from the technical settings.
Number 459: Specify a database name.
The database name for the Online Service System (001) was omitted from the technical settings.
Number 460: No authorization to log on to Online Service System
You do not have authorization to call transaction OSS1. Up to Release 2.2F: The authorization S_TSKH_ADM is checked for value 1. After Release 2.2F: For transaction OSS1, there are two special authorization profiles (see appendix D).
Number 461: No authorization to maintain technical settings.
You do not have the authorization to maintain the technical settings (see appendix D).
Number 462: E: RFC destination could not be generated.
In Releases 2.2, you can ignore this message. When saving the technical settings, an attempt is made to generate the RFC destination SAPOSS. The length of an RFC destination is limited in 2.2, and the maximum length was exceeded by the parameters of the technical settings.
Appendix D
As of Release 2.2F, there are two different authorization profiles for transaction OSS1: S_OSS1_START and S_OSS1_ADMIN.
S_OSS1_START authorizes you to call transaction OSS1 and to log on to the Online Service System. In addition, S_OSS1_ADMIN contains the
authorization to maintain the technical settings for the transaction.
The technical settings of OSS1 must be made at least once. Therefore, add S_OSS1_ADMIN to your user profile, log off, and then log on again afterwards.
Appendix E
Prerequisites:
(A TCP/IP connection can be established between the SAProuter on
the customer system and the SAProuter on sapserv3 in Walldorf.
(The SAProuter process must be started on the server that is registered
with SAP:
saprouter -r -R saprouttab &
Example of the "saprouttab" file with minimum configuration:
saprouttab - Example
Allows connections from the entire customer network to sapservX
and therefore to the Online Service System via SAProuter port 3299.
P * sapservX sapdp99 *
Allows connections from sapserv3 to the entire customer network,
for example for EarlyWatch or First Level Support.
P sapservX * * *
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 09:13:57
Priority: Correction with high priority
Category: Consulting
Primary Component: XX-SER-NET Network connection
Antonio.
Edited by: Antonio Voce on May 22, 2008 5:07 PM -
DB13 jobs cancelled due to "Permission denied" error.
Hi all,
DB13 jobs are cancelled due to "Permission denied" error. I pasted the error log below. Actually we have upgraded database from Oracle 9 to 10, then after these jobs are cancelling before that this was fine. What could be the problem cousing to cancell these jobs in DB13. Please help me to resolve this issue.
Please let me know if you need any more information.
Current Database:- ORACLE, Release:- 10.2.0.2.0
SAP Component version:- SRM 4.0 , Release 640
Job log
Job started
Step 001 started (program RSDBAJOB, variant &0000000000080, user ID sridharm)
Execute logical command BRCONNECT On host aaebp0us
Parameters: -u / -c -f check
BR0801I BRCONNECT 7.00 (26)
BR0252W Function fopen() failed for '/oracle/PRD/102_64/dbs/initPRD.ora' at location BrInitOraCopy-2
BR0253W errno 13: Permission denied
BR0252E Function fopen() failed for '/oracle/PRD/sapcheck/cdyeuiqp.chk' at location main-11
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/PRD/sapcheck/cdyeuiqp.chk failed
BR0806I End of BRCONNECT processing: cdyeuiqp.chk2008-06-21 22.00.15
BR0280I BRCONNECT time stamp: 2008-06-21 22.00.16
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Thanks for your help....
Sridhar MHello,
Please check the SAP Note 113747 - Permissions for DBA tools BR*Tools and SAPDBA
The following settings are required for calling the BRTools and SAPDBA correctly, in particular when calling the BRTools from sapgui:
(1)
ora<sid> and <sid>adm on DB server have a search path on /sapmnt/<SID>/exe. (All br* and sapdba are contained in this directory.)
ora<sid> belongs to the dba group,
<sid>adm belongs to the sapsys group,
(2)
<sid>adm on the database server has the rhosts entry: "+ <sid>adm".
(3)
The ops$<sid>adm Oracle user must be created in the DB and must have the sapdba role (not DBA!) (refer to Note 134592 for more information about the role).
(4)
brarchive, brbackup, brconnect, brtools have permission 4775:
-rwsrwxr-x ora<sid> sapsys ...
These can be started by the ora<sid> or the <sid>adm OS user.
brrestore, brrecover, brspace, and sapdba have permission 755:
-rwxr-xr-x <sid>adm sapsys ...
These can only be started by the ora<sid> OS user.
<<
Problem is due to authorization, so correct it and it will work.
Peter -
hi all,
We want to take backup of our Production server through DB13. but when we start backup it generate error
" 11/2/2010 1:15:13 PM Job started
11/2/2010 1:15:13 PM Step 001 started (program RSDBAJOB, variant &0000000000010, user ID BASIS)
11/2/2010 1:15:13 PM Execute logical command BRARCHIVE On host sapprd
11/2/2010 1:15:13 PM Parameters:-u / -jid LOG__20101102131513 -c force -p initPRD.sap -sd
11/2/2010 1:15:13 PM SXPG_COMMAND_EXECUTE(LONG)
11/2/2010 1:15:13 PM COMMANDNAME = BRARCHIVE
11/2/2010 1:15:13 PM OPERATINGSYSTEM = ANYOS
11/2/2010 1:15:13 PM TARGETSYSTEM = sapprd
11/2/2010 1:15:13 PM DESTINATION =
11/2/2010 1:15:13 PM BR0002I BRARCHIVE 7.00 (32)
11/2/2010 1:15:13 PM BR0006I Start of offline redo log processing: aeematvd.svd 2010-11-02 13.15.13
11/2/2010 1:15:13 PM BR0252E Function fopen() failed for '/oracle/PRD/saparch/aeematvd.svd' at location main-6
11/2/2010 1:15:13 PM BR0253E errno 13: Permission denied
11/2/2010 1:15:13 PM BR0121E Processing of log file /oracle/PRD/saparch/aeematvd.svd failed
11/2/2010 1:15:13 PM
11/2/2010 1:15:13 PM BR0007I End of offline redo log processing: aeematvd.svd 2010-11-02 13.15.13
11/2/2010 1:15:13 PM BR0280I BRARCHIVE time stamp: 2010-11-02 13.15.13
11/2/2010 1:15:13 PM BR0005I BRARCHIVE terminated with errors
11/2/2010 1:15:13 PM External program terminated with exit code 3
11/2/2010 1:15:13 PM BRARCHIVE returned error status E
11/2/2010 1:15:13 PM Job finished
SAP ECC 6.0 SR3 installed on Solaris 5.10.
we check permission on /sapmnt/SID/exe and oracle/PRD/saparch , it looking ok
prdadm> ls -l /sapmnt/PRD/exe/
total 1132342
-rwxr-xr-x 1 prdadm sapsys 4411632 Aug 1 2007 SAPCAR
-rwxrwxr-x 1 oraprd dba 4353608 Feb 7 2008 brarchive
-rwxrwxr-x 1 oraprd dba 4509144 Feb 7 2008 brbackup
-rwxrwxr-x 1 oraprd dba 5971136 Feb 7 2008 brconnect
-rwxrwxr-x 1 oraprd dba 4878776 Feb 7 2008 brrecover
-rwxrwxr-x 1 oraprd dba 1712640 Feb 7 2008 brrestore
-rwxrwxr-x 1 oraprd dba 6163760 Feb 7 2008 brspace
-rwsrwxr-x 1 oraprd dba 2155240 Feb 7 2008 brtools
prdadm> ls -l /oracle/PRD/
total 88
drwxr-xr-x 60 oraprd dba 1024 Jan 8 2010 102_64
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 mirrlogA
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 mirrlogB
drwxr-xr-x 2 oraprd dba 30208 Nov 2 12:49 oraarch
drwxr-xr-x 3 oraprd dba 512 Jan 7 2010 origlogA
drwxr-xr-x 3 oraprd dba 512 Jan 7 2010 origlogB
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 saparch
drwxr-xr-x 2 oraprd dba 512 Nov 2 13:08 sapbackup
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 sapcheck
drwxr-xr-x 15 oraprd dba 512 Jan 7 2010 sapdata1
drwxr-xr-x 12 oraprd dba 512 Jan 7 2010 sapdata2
drwxr-xr-x 12 oraprd dba 512 Jan 7 2010 sapdata3
drwxr-xr-x 11 oraprd dba 512 Jan 7 2010 sapdata4
drwxr-xr-x 2 oraprd dba 512 Jan 7 2010 sapreorg
drwxr-xr-x 4 oraprd dba 512 Jan 7 2010 saptrace
plz guide where is the problem.
Regrads
KhanIst we execute this , but generating error ,
now execute again , successfully RUN. Great backup has been started
root@sapprd # pwd
/sapmnt/PRD/exe
root@sapprd # ./saproot.sh PRD
Preparing /usr/sap/PRD/SYS/exe/run/brbackup ...
Preparing /usr/sap/PRD/SYS/exe/run/brarchive ...
Preparing /usr/sap/PRD/SYS/exe/run/brconnect ...
Preparing /usr/sap/PRD/SYS/exe/run/brtools ...
Preparing saposcol ...
Preparing icmbnd ...
done
Maybe you are looking for
-
I've recently installed Framemaker 7.1 and finding it an excellent ddp program. Using the table custom ruling and shading is giving me issues. When I apply a custom ruling to a cell, row or column, then apply, save close the file then open the change
-
EJB 3.0, BC4J and weblogic managed server
Hi, I've got a problem using EJB 3.0 with a BC4J Application module in a weblogic managed server. My bean is a stateless session bean that use BC4J for database transaction. When I call the bean the first time, It returns de values I need, without pr
-
My recorded signal is not sounding like the signal I am monitoring.
My recorded guitar is not sounding like the signal I am monitoring. It sounds very good when recording, but lacks energy and detail when it is played back. If I am using input/direct monitoring am I also bypassing the Analog to Digital converters? Co
-
The Apache axis2 jar files are not taking at run time
While running the application I was getting the following errors. The error is getting at run time only. It has compiled successfully. It ran under eclipse without any issues. But with Apache axis we are getting following error trace while uploading
-
Coordinate System of template form
Hi there, we are currently using Headstart 3.4.2 that was adjusted to our clients requirements. One of the requirements was not to work with a real MDI look and feel, that means every Forms-Module is sized to fit exactly into the MDI Window and then