BRtools Two-Phase-Backup to remote disk and remote tape drive

Hello,
i want to two-phase-backup a SAP-System to a remote disk and from there to a tape drive.
Backup to remote disk works fine, but can i use brtools to write the backup-files from the remote machine to a tape drive that is connected to the remote machine?
I'm using SLES 10 on both machines.
I can't find anything on the SAP Documentation to this. It ist possible to backup to remote disk and to remote tape, but it is not clear that it works when in Phase 1 of the backup the files are written to a remote disk. It seems like i can only tell brtools to backup the files from a local disc to a remote tape-drive, is this right?
Thanks in advance for your help.
Regards
Phil

Hi Nirmal,
thanks for your answer.
But i can do disk to tape Backups, when i choose "Backup of Disk Backup" from BRtools, i see a list of all Backups i wrote to the local disk and can write them to remote tape by using pipe as backup device.
The only thing is, my Backups are stored on a remote disk, and from there it seems i have to write them to tape with cronjobs using a shell script. That's not my favourite solution, but it's ok.
Regards
Phil

Similar Messages

  • I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

    I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

    Quote from: Richard on 15-November-07, 20:33:05
    tornado2003,
    What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
    After that boot normally and install the latest nVidia ForceWare Drivers
    Take Care,
    Richard
    i guess you missed that:
    Quote from: tornado2003 on 15-November-07, 17:26:52
    ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
    ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

  • Remote System and Remote Key Mapping at a glance

    Hi,
    I want to discuss the concept of Remote System and Remote Key Mapping.
    Remote System is a logical system which is defined in MDM Console for a MDM Repository.
    We can define key mapping enabled at each table level.
    The key mapping is used to distinguish records at Data Manager after running the Data Import.
    Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
    Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
    Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
    If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
    Now, I have to look at Data Syndication and Remote key.
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    Regards
    Kaushik Banerjee

    You are right Kaushik,
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
    Yes, but if they are duplicate, they needs to be merged.
    But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
    Pls refer to these links for better understanding.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
    Hope this helps,
    + An

  • MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue)  I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

    Hello (hopefully someone can shed some light on my issue)
    I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
    a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
    I restarted the machine and this time a flashing question mark folder!
    could not do a thing.
    so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
    so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
    After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
    (interestingly since the RAID card had been removed the RAID UTILITY  from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
    O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
    but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
    thanks for your help in advanced.

    hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar  problem some one else had!
    working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
    and try to restart, hoping all was fine, this was not the case :-(
    I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
    so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
    ...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
    (nvidia geforce 8800gt 2x dvi).
    I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
    Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
    from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
    carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
    what was the cost to get this?  bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
    and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

  • Search for [Remote Key] and [Remote System] in Data Manager

    Hello all
    I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it.
    I have, however, found this in the Data Manager reference guide:
    REMOTE SYSTEM AND REMOTE KEY FIELDS
    MDM uses the remote systems defined in the Remote Systems table
    within the MDM Console to store and maintain key mapping information
    for each record or text attribute. It does this using a virtual “key
    mapping” field that you never see in the MDM Client.
    This virtual key mapping field is very much like a qualified lookup field
    into a virtual key mapping qualified lookup table.
    Key Mapping information stored in virtual lookup field
    The Remote System and Remote Key fields are normally not visible;
    however, they do appear in several places in the MDM Client.
    Specifically, both fields: (1) appear in the File > Export dialogs in Record
    mode for exporting value pairs; (2) are recognized by the File > Import
    dialog in Record mode for importing value pairs; and (3) appear in the
    Edit Key Mappings dialogs in both Record mode and Taxonomy mode,
    for viewing and editing value pairs.
    Is there any way to search on the value in the remote key from the Data Manager?

    Not sure search i think not possible.
    But you can see keys as mentioned:
    Enable Key mapping in Console.
    MDM Client maens MDM Data Manager.
    They do appear in several places in the MDM Client or Data Manager. Three different methods to see in DM are given already below:
    Specifically, both fields: (1) appear in the File > Export dialogs in Record mode for exporting value pairs; (2) are recognized by the File > Import dialog in Record mode for importing value pairs; and (3) appear in the Edit Key Mappings dialogs in both Record mode and Taxonomy mode, for viewing and editing value pairs.
    BR,
    Alok

  • Remote Control and Remote View Problem

    Hi,
    I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
    Remote Control and Remote View works great but I noticed one problem.
    We have a logo of the school that is forced down on to the desktop when a
    user logs in through group policies. This logo works perfect for the
    desktop wall paper and loads every time a user logs in.
    When I Remote Control or Remote View a computer the users desktop wall
    paper turns from the logo being forced down through group policies to the
    desktop to a blue desktop wall paper.
    I would prefer the desktop wall paper staying the schools logo when I
    Remote Control or Remote View because if the desktop wall paper changes to
    the blue color I mentioned above when I Remote Control or Remote View the
    users computer, they will know that someone is taking over their computer
    which sometimes we dont want them knowing.
    We have Windows 98SE computer running Novell Client 3.4 and we have some
    computers running Windows XP Professional SP1 and Windows XP Professional
    SP2 both running Novell Client 4.91 SP2.
    The Remote Control and Remote View problem of the desktop wall paper
    changing on the users computer occurs on all operating systems mentioned
    above.
    Is there a solution to my above problem? When Remote Controlling and
    Remote Viewing someone's computer I don't want the desktop wall paper to
    change.
    Thanks!

    Bpilon,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Remote control and remote desktop client in sccm 2012 ?

    What is the difference between remote control and remote desktop client in sccm 2012 ?

    Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
    Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
    Why you would use one over the other depends on your requirements.
    Blog: www.danielclasson.com/blog |
    LinkedIn:
    Daniel Classon | Twitter: @danielclasson

  • Can i run remote profiling and remote debugging at the same time

    can i run remote profiling and remote debugging at the same time .
    i am using jdev9.0.5 and oc4j9.0.4 standalone server.

    i think i am wrong

  • SUSPEND and NOTIFY converted as remote hold and remote retrieval

    The other side says that is sending SUSPEND and NOTIFY - SS7 messages which are converted as remote hold and remote retrieval on PRA.
    It says those message are coming to my Cisco box (c5350-is-mz.123-18), but the IOS it is not able to interprete them correctly.
    I am not seeing this messages in any debugs... Anyone have any idea about ?
    Thanks
    Robert
    Attached is the debug i've got from the other side

    What debugs are you getting on the access server? The remote side is trying to communicate with the access server but maybe the messages are getting dropped. Following link may help you
    http://www.cisco.com/en/US/docs/routers/access/as5350/software/configuration/guide/54basic.html

  • Remote disk and time machine?

    i have my external hard drive attached to my airport extreme and all my computers, mac and windows, play nice and can copy files to and from it but i have partitioned the hard drive to allow for space for time machine to work but time machine wont find it or if it does refuses to use it as a disk. does time machine work with remote disks?

    heay,
    I had the same issue with an exteral 250Gb USD WD disk....
    I found the solution to my issue in the following manner.
    1) the disk/partition must be formated "OS X extended" format.
    2) you should be able to use you the Disk/Partition with TM while connected directly to the MAC. (this is just to make sure TM works fine.
    3) connect the disk to the airport extreme via USB.
    4) mount the the disk on the desktop
    5) go to TM preferences and change the backup disk to the disk/partition you just mounted.
    6) Activate the TM "status info" in the menu bar
    7) turn TM "ON" (DO NOT ATTEMPT TO RUN TM, or you'll have to do the entire procedure from scratch)
    8) close the TM preferences.
    9) unmount the disk from your desktop (use the the eject button on the shared devices tap in the finder)
    10) restart the MAC (you don't need to do this... but this is just to make sure that the disk is unmounted completely)
    11) once the boot-up is completed, go to the TM status icon and choose "backup now"
    You must make sure that the disk and or partitions you want to use with TM are never mounted before or during the TM process.
    As long as the disk/partition is mounted TM will not function.
    if you need to use the disk for other purposes than TM wait until TM has done its first run... then you can mount and unmount freely... TM is very sensitive to this "mount" issue.
    Note that sometimes TM will fail to funtion... this is not a big problem...
    you just need to make sure the disk/partition is unmounted and then run the TM back from the menu bar.
    Also note that your first backup will most likely take a very very very very very long time to be completed. just leave the MAC on a make sure it does not fall sleep.
    try the above and the let me know if it works or not...
    www.gekko-systems.com

  • What is a "remote disk" and why is it in my finder?

    I have a new MBP which I populated using migration assistant.  Now I have a mysterious icon for a "remote disk" in my list of hard drives. I can't eject it, and it does not show any info with a command-I. Anybody know what it is, if it is evil, and how to get rid of it?

    It means that another computer on your network has DVD or CD Sharing enabled in the Sharing pane of System Preferences, and is used to access shared optical disks.
    (124757)

  • L20 and IBM tape drive

    Hi all,
    I have StorageTek L20 robot (FW 2.12.06) and IBM Ultrium-TD1 tape drive (FW:59C0) which i updated with latest firmware.
    Now robot cannot recognise tape drive, with code: 00 Unknown Drive
    I assume this is firmware related problem, so the question is:
    Will robot firmware update to version 2.15.03 resolve this issue, and bring online my backup?

    I have used external IBM SCSI drive with Solaris8 and legato without any issues.
    What kind of a tape drive is it? What is the Sun Hardware platform being used? Are there any messages logged just before the panic? Is st.conf configured properly? Is there a problem on the scsi bus?
    You might want to send the core files to Sun, if you have got suport on the box or use kdb yourself.

  • Remote Desktop and Remote Access

    I am a very new Mac user but have extensive PC experience. I work in the IT industry and I find the use of Remote Desktop very useful. How can I setup my Mac to be able to access it when I am not at home?

    What machine and operating system do you wish to access it from?

  • Remote Desktop and remote USB scanner

    Hello, We currently use NeatWorks to scan our company receipts and docs. Several of our employees access the NeatWorks database remotely, via a locally installed NeatWorks application, the connection we use to the file is the simple Finder 'Connect to Server'. Because NeatWorks is not networkable, we access it one at a time.
    The problem is the Neatworks database is huge, it can take 20 minutes to load remotely.
    Our solution to this would be to use Remote Desktop to access our server that has the application and database for a quick load. The problem is scanning.
    Can Remote Desktop connect to the users local USB scanner so that the scans go directly to the remote database? If not, is there any other elegant solution to this remote scan problem?
    We were hoping to find a networkable program to replace NeatWorks that wouldn't load the entire database, just an index perhaps.
    Thanks a million for any input!
    John

    Can the NeatWorks application on the server, see, connect to the USB scanner device on the user end.
    That would not be a function of Apple Remote Desktop. The NeatWorks software would need to have code to access a remote scanner, either natively or using the Scanner Sharing feature of Mac OS X 10.6 (if that will support the USB scanner you're using).

  • Ethernet connection between remote computer and remote ax

    My wireless system is Time capsule connected to the cable modem. Airport Express connects through the wireless network created by TC. My G5 is connected to the AX by ethernet. Initially the G5 was able to connect to the internet by the ethernet connection. I attempted to connect my MacBook but I was unsuccessful. Any help would be appreciated.
    Thanks,
    Gordon

    Solved the problem. The wireless network has to be setup as a WDS network in order to connect a remote device by ethernet to a remote TC, AExp, or AExt.

Maybe you are looking for

  • Minor display bug in JDev 11g "View Annotation" with Subversion

    Hi all, A very minor visual display issue with the "View Annotations" feature of JDev 11g when using a Subversion repository. To reproduce, simply follow these steps: 1). Open up any source file and right-click in the editor; select Versioning -> Vie

  • File link not working on Adobe 8.0

    Hi, on Adobe Acrobat 8.0 the File link does not work. For example if I have in the pdf the link: c:\daten\info.doc, I can't open this link. If it is a Weblink then it is working. The customer told me that was working in Adobe6???? On my PC it does al

  • ORA Connect via SSH Tunnel on Windows failed! LINUX works ...

    Hello again, i tried to establish a Oracle Client Connection via SSH Tunnel on WinXP Pro. 1. Opened SSH-Tunnel Connection with plink (putty) TUNNEL: 10.5.1.111:1521 => localhost:1521 (plink works fine with telnet, MySQL Client and other stuff) 2. Con

  • Fill another textbox based on list item value

    I have a list_item with option1, option2, option3 and 'N/A' with values 1,2,3,4. There is another text field called startdate of date type format FMMM/DD/RRRR. I would like to display date '01/01/1900' in the text box whenever user select 'N/A' in th

  • Assessable Value in Import Purchase Scenarion.

    Dear Experts, Can anybody please explain, what is the Assessable value in Import Purchase.         1) Whether it is Material Basic Price.         2) Value after discount calculation on basic price.         3) Value includes interest amount         4)