Brush flow and opacity inoperative

It seems that the flow option for standard brushes is not working

Good thinking!
Resetting the tool corrects it. Thanks!
Changing the preset does not help.
Pen/Stylus pressure was off as this was on my laptop.
Thanks so much for this!

Similar Messages

How can I set the CS5 to Intuos Pro Large for changing brush size and opacity and others?

How can I set together to my PS5 or Ps6 in order to change brush size and opacity at the Intuos Pro Large?
Nachricht geändert durch Orhan Tarman

The MTU setting on the interface is the layer 3 packet size. In this case, the MTU is set to 1500, but the largest frame size transmitted on the interface (including layer 2 headers) is 1516. It sounds like you are experiencing another problem at the LES.

Adjustment Brush: Flow and Feather

Not so much a question, as an observation. Maybe it will help somebody.
I'm not a big user of the Adjustment Brush. I tend to use it occasionally for applying Clarity, Highlight Recovery, or applying/removing Sharpening.
I'd never much paid attention to the Flow and Density settings before today, and I certainly never really understood the Flow setting. The Feather setting never seemed to work as expected too. So, I just spent 10 minutes with a 50% grey image and a -2-stop brush, getting to the bottom of it all.
Density is the easiest setting to understand: it's like a percentage limit on effect opacity. So 100 means that your brush can deliver 100% of your chosen settings.
Flow was a little tricker to fathom. I expected Flow to control how fast the "paint" comes off the brush. But, no matter how slowly I move the brush, it doesn't come out any thicker. Maybe Flow is the wrong word. I worked out that you had to paint the same spot several times with a low Flow setting to get full Density. It's like Single Pass Density.
Feather is where I came unstuck. Setting any more than 0 give you a two-circle brush cursor. To me, this suggests that the inner circle is solid, the outer circle is clear, and inbetween is a gradient curve. In reality, the brush paints well outside the outer circle (increasing with Feather amount), and isn't solid at the inner circle either. This explains why I've always gone over the edge with a feathered brush, and why it always looks bloody awful when painting an exposure adjustment. Thank goodness the guys added Highlights to the brush settings.

Rob Cole wrote:
To be clear (and I think this is what you were saying too): Flow controls amount of paint per unit of time, regardless of brush movement speed..., for example:
flow = 100 -> you'll get full amount of paint instantly, that amount determined by density.
flow = 0 -> there will be zero paint coming out, so not a useful setting.
flow = 50 -> somewhere in between...
No, that's just it: it's not what I was saying. It is what I expected, but not what I found. Time has nothing to do with it. You can take as long as you like, and no more paint comes off the brush. That was the point I was making, and why I said I thought that "flow" was the wrong word. To me, flow is time-related (volume per second).
'Flow' seems to work by rationing the amount of paint in each stroke. It is only built up by extra strokes.

Brush Hardness and Flow

I wish there was also an option to choose Hardness and Flow in the new HUD vertical movement - in other words I can set the size of the brush with my scrollwheel and custom button mapping, so I wish i could use hardness and flow (not opacity) with the new HUD interface.
It also would be great if there was an option to map HUD directly to RMB, so there wouldn't be a need to hold CRTL+ALT. The more customization the better.

how do you access contextual menus?
With crtl+alt? What I'm saying is, there should be an option to switch that. HUD is a nice feautre and easily can replace the contextual brush menu.
HUD preferences doesn't support the flow.

How can I create a scatter brush that preserves the color and opacity of the original selection?

I'd like to scatter a small image randomly, like you can with scatter & size jitter. I can't think of any way to do that on this image other than make a brush out of it, but creating a brush from the image will change its color uniformly. I'd like to keep the color and opacity of the image the same, but have it scattered. I'm sure there's a way to do this, but I can't figure out how. Any ideas?

I found a free plugin that should do, but we just need to know what operating system your using?
I think the plugin is windows only.
It's called mmCopies
MuRa Filter Meister - Photoshop Plugins
http://www.ahadesign.eu/download/allgemein.html
http://www.ahadesign.eu/bildbearbeitung/tutorials/bildbearbeitung/381-mura-filter-meister- und-windows-vista-problem.html
works on windows 7 x64 in cs3:

Brush flow won't change when switching brushes

my brush flow setting won't change according to the type of brush i'm using and i don't know why.
for example, if i'm using a round brush with a 70% flow then i decided to switch to another brush that i have preset with a 100% flow. under normal circumstances the flow will change with the brush preset, no? but when i do it the brush flow will stay the same as my previous brush setting.
can someone please help me.
thank you.
i'm using CS6

Have you checked the Options bar? The Icon immediately after the Opacity setting would cause that effect.

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

Flow and Static checks

Hi there,
I created a datamodel and have applied a condition to it. When I execute the interface the invalid records are captured in the E$ table but all the other valid records do not appear on the target table. I couldn't able to find the reason for this. I have applied flow and static check to the condition and the same for the table column. Im not sure why the validate records are rejected.
Any help is appreciated.
Cheers

HI!
Let me understand, do you want the invalid records at target table?
If you use the flow control it will keep the records at E$ and WILL NOT load it.
If you use static control, it will LOAD the data and, after that, verify what are the records with problems.
Don't use both controls at same time, it doesn't make logical sense unless when needs to validate distinct constraints at each moment.
Does it help you?

Cover flow and album sort issues

I just got a 80GB iPod classic for Christmas and I have noticed some annoying differences between iTunes cover flow and iPod cover flow:
1. In iTunes cover flow, when you have songs with "Unknown Album", they clutter up the cover flow for each artist. In iPod cover flow, they are sent to the back of the cover flow in a nice little "Various Artists" cover. I like how this works on the iPod better.
2. iTunes cover flow sorts by album artist, so you don't see a separate album for each non-album artist song.
For example: If I set my album artist for the Saturday Night Fever soundtrack to "Saturday Night Fever" (don't ask why, this is how i like it sorted) then I will only see one "Saturday Night Fever" rather than one for Bee Gees, one for Kool & the Gang, etc.
iPod cover flow sorts by artist, so you see a separate album for each non-album artist song. I like the way this works in iTunes better.
3. When sorting by "Album by Year" in iTunes, syncing the iPod doesn't seem to follow the same sorting. Albums are still sorted on the iPod alphabetically. I want them to sort by year on my iPod.
So I would appreciate it if someone could help me with all 3 of these issues. As you can see, sometimes iTunes is better for me, sometimes iPod is better for me.

3. Playlists should be sorted in the same way as they are in iTunes. The Cover Flow order is fixed.
This is not the case, at least not with iTunes 7.5.0.20 and my 80GB Classic running 1.0.3 on it (current version as of this writing). In iTunes, under LIBRARY, I select Music, and I have my music sorted via *Album by Year*. This works perfectly in iTunes. I'll use my Soundgarden library as an example, as it shows the problem nicely.
*_iTunes order_:*
Ultramega OK
Louder Than Love
Screaming Life/Fopp
Badmotorfinger
Superunknown
Songs From The Superunknown
Down on the Upside
A-Sides
That's ordered by date and is perfect. +Ultramega OK+ was released way back in 1988, while A-Sides was released nearly 10 years later in 1997. In Cover Flow View it works great. However, in the iPod it's sorted alphabetically, which is completely wrong:
*_iPod Classic_:*
A-Sides
Badmotorfinger
Down on the Upside
Louder Than Love
Screaming Life/Fopp
Songs From The Superunknown
Superunknown
Ultramega OK
This is totally wrong. And I haven't yet found a way to force it.
Apple, please, this shouldn't be that difficult.

Creating variables in Process Flows and using thse variables in the filter

Hi,
I am new to OWB and in learing stage. Need to information.
*1. as to how pass/create/use variables to OWB mapping ?*
*2. Creating variables in Process Flows and using thse variables in the filter operator of the OWB mapping?*
*3. Other mechanisms of how to create/use variables within OWB mapping itself ?*
can you please provide the above details and guide me / help me in this regard.
Thanks,
skms.

1. Add parameters to your mapping using the MAPPING INPUT PARAMETER from the pallette.
2. Add parameters to the START operator in the process flow. Bind the process flow parameter to the Mapping parameter.
3. May be appropriate to use CONSTANTS instead of parameters.
Regards
Si

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip nmed 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved th

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

A series of video files (0001.MTS to 0005.MTS) were imported into premiere, when moved to timeline premiere combined them and made them look like one long clip named 0001.MTS. Multiple motion edits and opacity edits were made. When project manager moved the project, the actual video content of 0002.MTS to 0005.MTS was missing(source clips are still there but they were playing and working as part of that 0001.MTS timeline clip before). Those parts of the 0001.MTS clip in the timeline were Danger Striped and can be relinked but now have no edits anymore. The edits are apparently only linked with the original 0001.MTS source clip but extend beyond the actual range of the actual source clip. At the time I thought it was weird that premiere displayed the whole string of clips as one (with one name and no breaks) but it all works in the original project file but cannot be transferred to another location without multiple clips showing Danger Stripes.I need to move it and preserve the dozens of motion and opacity edits linked to the apparently oversized timeline clip. HELP!! any ideas?
I did not nest any clips or sequences, premiere just seemed to combine the clips under one name when I moved them to timeline.
I am using CS5.

I have the iPhone 5 and iPad 3. I will travel to Europe and would like to know if I need a current covertidor 220-110 for my equipments. I have an adapter, but that did not change the flow and do not want to risk it. Thank you.

I have the iPhone 5 and iPad 3. I will travel to Europe and would like to know if I need a current covertidor 220-110 for my equipments. I have an adapter, but that did not change the flow and do not want to risk it. Thank you.

All you need is a physical plug adapter, not a voltage converter. All Apple chargers work on any voltage from 110 - 240 worldwide.

Optical Flow and setting Offset make Not an Image

Hi all,
What I'm trying to accomplish is taking only a few hundred rows from a camera sensor to improve frame rate and moving the offset around based on movement in the image.
I am utilizing configure grab and grab in a loop to improve refresh rate.
I set up a test where the offset in Y was just incremented each loop and displayed the image. This is no problem. I have the incrementor as a remainder output and it will loop all day without error, and the image 'scrolls' across the available sensor space.
When I use optical flow (or point LK algorithm), with no incrementation, and just moving the camera around, optical flow has no problem. It will run all day. Also, the output is correct when I take care to set up the algorthim.
However, when I put the incrementation of the offset and the optical flow together, there is a problem. I expect the optical flow to return a vector similar to my incrementation. Instead, the program exits with a 'Not an Image' in the input of the optical flow block. Indeed, if I put a probe down the image does not appear.
The weird thing is this: for some increments it runs no problem. If I increment 10 rows at a time, no problem. If 8 or 9 or 1 for example, it crashes with 'Not An Image'. If I feedback the output of the optical flow vector into the offset change, the program will run until the distance of the vector in one of the X or Y directions happens to be one of these 'unhappy' numbers.
I also don't understand why 'Grab.vi' is returning an empty image when connected to optical flow, but with an image output without optical flow the image is never empty.

Hi,
Please share your code if possible. This would be helpful to better understand your code flow and make recommendations accordingly.
Also for your reference, here is also a link to a forum regarding optical flow:
http://forums.ni.com/t5/Machine-Vision/Displaying-Optical-Flow-from-AVI-file/m-p/2738890
Luis S
Application Engineer
National Instruments

Iphone pauses and flips to cover flow and back with other earphones

If I use any other earphones than the ones that are provided, my iphone pauses and plays randomly, and flips to cover flow and back without any movement... any help?

Connect the two devices that are showing large backups to your computer and check the capacity guage in iTunes to see how large "Other" is. Sometimes this can grow to be extrememly large, requiring you to restore the device to reduce it to a more reasonable level (approx. 1GB).

Cover Flow and pictures of album...

Alright, hey peeps, I have a SLIGHT(ya right) problem. When I take songs from my comp to my iPod classic (80g), when I go on "Songs" it shows an album right? Yeah, well, the thing is, when I go on SONGS, it only shows ONE album picture. Thats ok, but when I go to cover flow, the other album pictures (That are visible on Windows Media Player) are NOT there! Where are the picture?! And when I listen to the song (the cover of the album in this one is a large ship stuck in an iceberg) and its not there while you can clearly see it in WIndows Media Player. Please people help out because I AM VERY FURIOUS!! I AM BEGGING FOR YOUR KIND AND HELPFUL WORDS!!
~Rammstein~

iTunes will display a cover in many of it's views provided at least one track from the album has embedded artwork. The iPod appears to load only the artwork from track one to create the cover flow and album views which means that it can sometimes fail to display art for albums even when you can see the art in iTunes. Further, when tracks are played on the iPod, artwork is displayed if and only if it exisits in the currently playing track, so track one may show art while track two does not.
To find all the tracks without artwork so that you can update them you can try http://www.stum.de/itunes-find-tracks-without-artwork/ for Windows or http://dougscripts.com/itunes/scripts/scripts13.php for Macs. If you're using Google or other FWSE to locate suitable images they should be jpg's and ideally square, 320x320 pixels or above and borderless to give the best results in the various menus.
tt2

Brush flow and opacity inoperative

Similar Messages

Maybe you are looking for