Brush flow won't change when switching brushes

my brush flow setting won't change according to the type of brush i'm using and i don't know why.
for example, if i'm using a round brush with a 70% flow then i decided to switch to another brush that i have preset with a 100% flow. under normal circumstances the flow will change with the brush preset, no? but when i do it the brush flow will stay the same as my previous brush setting.
can someone please help me.
thank you.
i'm using CS6

Have you checked the Options bar?  The Icon immediately after the Opacity setting would cause that effect.

Similar Messages

  • HT1668 My iPhone won't change when I turn to side, how do I fix

    My iPhone won't change when I turn to side, how do I fix

    Make sure you don't have it locked in portrait mode.  Is there a symbol at the top right of the phone (near battery indicator) that looks like a padlock with a circle round it?  If so, you turn it off by double clicking home button to bring up the multitasking bar and swiping to the right to uncover the button which controls this.

  • Access Connections - IP doesn't change when switching locations

    In my Access Connections setup, I have a mix of profiles; some using DHCP & some using static IPs.
    I am experiencing problem when manually switching between profiles, where the IP address is not always changing as expected.
    For example:
    (all profiles are wired connections)
    Home (DHCP)
    IP address: Allocated by DHCP
    Subnet mask: Allocated by DHCP
    Default gateway: 10.0.0.1
    DNS servers: Allocated by DHCP
    Office 1 (Static)
    IP address: 203.18.x.x
    Subnet mask: 255.255.255.240
    Default gateway: 203.18.y.y
    DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
    Office 2 (Static)
    IP address: 10.10.140.202
    Subnet mask: 255.255.255.0
    Default gateway: 10.10.140.1
    DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
    Office 3 (DHCP)
    IP address: Allocated by DHCP
    Subnet mask: Allocated by DHCP
    Default gateway: <blank>
    DNS servers: 10.10.140.7, 10.10.140.12, 203.18.z.z
    On many occasions when switching from, say, "Office 2" to "Home"; the static IP address for Office 2 (10.10.140.202) is not being replaced by a new IP allocated from my home router (which, by the way is configured to allocate IPs from the pool 10.0.0.2 to 10.0.0.4; so the old IP address should not be valid on that network).
    What is even more interesting is when you take DHCP out of the equation, for example when switching from, say, "Office 2" to "Office 1" (both of which are static IP profiles). The IP address 10.10.140.202 (Office 2) should be replaced by the static IP 203.18.x.x (Office 1) in all cases. However on many occasions it is not, and I'm left with the previous IP allocated.
    Has anyone else noticed this behaviour?
    I've found that by switching back and forth between profiles, it eventually resolves itself (although sometimes up to 3 or 4 switches is required).

    AC 4.42 fail to assign a static IP when the OS is in spanish and the wireless device is Intel. In that case the problem was fixed with a patch that the support guys release.
    In your case, I don't know my friend.
    Have you tried using only Windows, without AC?
    Regards

  • Bluetooth mouse won't reconnect when switched on

    I have a 2.4GHz Mac Min (last model before being replaced by the model without DVD drive) and a Mac USB keyboard.  I wanted to use a Bluetooth mouse as I don't like the trailing lead with a USB mouse, but I wanted a conventional three button type mouse as I need that for my RISC OS emulator program, so I bought a Logitech V470 Bluetooth mouse.  I set it up in Bluetooth preferences with no problem and set it as a favourite.  It then worked very well and was comfortable, smooth and accurate.  The problem comes after I have turned it off, either when I am not going to be using the computer for a period of time, or at night, obviously to save batteries.  When I switch the mouse back on, the computer and mouse simply will not reconnect.  The only way I can get the mouse to reconnect is to plug in a USB mouse, delete the original device pairing, and set-up a new device again; or power the computer off and restart it.  Sometimes restarting the computer doesn't work as a dialogue box will open over the password screen saying it can't find any mouse, then it finds it and shows the correct Mac Address of the mouse but even clicking any of the buttons on the mouse it still won't actually control the mouse pointer!
    I have another Bluetooth mouse, a Microsoft 5000, which I use with my MacBook Pro so I tried that with the Mac Mini and once paired it works fine, *including* after being turned off, reconnecting within a second of being turned back on.  So I asumed it was something to do with the Logitech mouse rather than the Mac Mini, and contacted Logitech.  As it was a new mouse they suggested it was faulty and I have been sent a new one.  However this one is the same and in one respect actually worse.  Once paired it works fine just like the original, but once it has been switched off, again it will not reconnect when switch on.  But with this one, even closing down the computer and restarting it won't connect the mouse.  The only way with this one is to delete the pairing and set-up a new pairing again.  That means whenever the computer or mouse are turned off, you have to connect a USB mouse so that you can get back in, delete the pairing and set-up a new pairing again, which is unacceptable.
    However, if I boot the Mac Mini into Windows XP using bootcamp the Logitech mouse works as you would expect in all ways *including* reconnecting immediately after being turned on, if it has been turned off.  Also I tried this mouse with a 2006 iBook G4 1.42GHz OS X 10.4.11 and again it functions correctly including reconnecting immediately it is switched back on.  So these last two tests appear to show a fault with the Bluetooth firmware in Mac OS X on the new Mac Mini not a fault with the Logitech mice.  After all, it is using the same Bluetooth and aerial whether in Mac OS X or Windows but it will only reconnect when in Windows.  As a final test I set the MacBook Pro up for Windows 7 using bootcamp and again the mouse will not reconnect in Mac OS X on the MacBook Pro but it reconnects fine in Windows 7 on the same hardware.
    Is there an answer to this problem?  Do you agree it is a firmware/software fault?  Does Apple know about it and are they going to do anything to correct the problem?  Thanks.  Roy

    Yes, I do notice that connection can be lost sometimes and regaining it can be difficult. I have even had to go to the point of finding an old USB mouse to get it going again. I usually try turning off the switch on the mouse and then back on. Then I click it about 5 times or so, usually it picks it up again. Same thing with keyboard. Not sure if that helps at all. Good luck.

  • Adobe Reader, MS Office window size changing when switching displays

    I have a current generation (mid 2012) MBP with Retina Display running ML 10.8.3. I also have a Dell U2413 monitor, confgured for
    1920x1200 resolution, connected via a Thunderbolt to Display Port cable that came with the monitor.
    When I switch displays, Adobe reader, Excel, and Powerpoint all have their window sizes change dramatically. Reader
    shrinks to just the status bar and is tucked in the very bottom left hand corner (it took me quite some time to even see it
    was there at all); Excel windows expand dramatically to be much larger than full screen, and Powerpoint windows shrink
    to about 1.5" square. Other windows (Mail, Chrome, Safari, iTunes) change or move slightly but are more or less OK.
    I know this problem is expected when switching to an external monitor with dramatically lower resolution (e.g. old In Focus
    projectors) but I don't believe it should happen with a hi-res monitor like the one I'm using.
    I have compared this behaviour with other users running same SW versions and external monitors with the same
    resoultion and they don't see this problem so I'm guessing there's some configuration option or low level setting
    that is messed up.
    These window size changes happen going both from internal to external and external to internal. Any ideas?

    I have a current generation (mid 2012) MBP with Retina Display running ML 10.8.3. I also have a Dell U2413 monitor, confgured for
    1920x1200 resolution, connected via a Thunderbolt to Display Port cable that came with the monitor.
    When I switch displays, Adobe reader, Excel, and Powerpoint all have their window sizes change dramatically. Reader
    shrinks to just the status bar and is tucked in the very bottom left hand corner (it took me quite some time to even see it
    was there at all); Excel windows expand dramatically to be much larger than full screen, and Powerpoint windows shrink
    to about 1.5" square. Other windows (Mail, Chrome, Safari, iTunes) change or move slightly but are more or less OK.
    I know this problem is expected when switching to an external monitor with dramatically lower resolution (e.g. old In Focus
    projectors) but I don't believe it should happen with a hi-res monitor like the one I'm using.
    I have compared this behaviour with other users running same SW versions and external monitors with the same
    resoultion and they don't see this problem so I'm guessing there's some configuration option or low level setting
    that is messed up.
    These window size changes happen going both from internal to external and external to internal. Any ideas?

  • Macbook pro retina color profile changes when switching from integrated to discrete

    Late 2013 macbook pro retina color profile changes when auto switching from integrated to discrete graphics card. Problem started after updating to 10.9.3

    Same here. Really annoying because I have my screen calibrated for photo editing, which makes it much warmer than the default color profile. A lot of websites cause the graphics cards to switch for a couple of seconds, which causes the profiles to switched back and forth a few times, everytime. Really annoying, and dissapointing to see, considering Apple released like a hundred .3 betas.
    You can use gfxCardStatus to make it stay on one graphics card over the other... Just remember to change it back when you're using a program that actually needs the descrete card.

  • Album artwork does not change when switching tv seasons

    With the new iTunes 11, television seasons are now grouped together.  When switching the view from one season to the next, the artwork doesn't change, it remains on the first season.  Is there a way to fix this so that the proper artwork is displayed for the proper season?

    This manual process DOES work to add and save my album artwork. Unfortunately, this is a long process for over 9,000 songs.
    I do not have an Album Artwork folder, but I do have an unknown Album Artwork file, not folder, any thoughts on this? One thing to consider for my situation is two things:
    1. To separate my music files from my regular files, I keep my music files on the D:, away from my Itunes folder on my C:
    2. To conserve space, I do not allow Itunes to make a copy of my files on my C:
    Could either or both of these issues be the source of my problem? Should I remove Itunes and it's contents and reload the software and start from scratch?
    Message was edited by: pullinmyhairout
    Message was edited by: pullinmyhairout

  • Hi I've installed iOS 7 on my iPad and now when I go onto google it rotates automatically and won't change when I hold the iPad sideways,only happens with google?

    HI I've installed ios7 on my iPad and now when I go into google it rotates straight up and down and won't change,it only does this in google?

    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • Printer settings menu does not always change when switching printers

    I am running OS 10.3.9 and also seen this issue on a 10.4 machine. When switching from one printer to another the printer options drop down menu does not always transfer to the correct menu for the newly selected printer. It stays at the menu for the last used printer. I am using several different Sharp printers as well as some HP models. The applications being used are Office 10 Word and Power Point. If anyone has seen this and has a fix I would greatly appreciate it.
    Thanks

    I don't have a solution but have also noticed that the printer in the menu is sort of like spinning the wheel of fortune.
    Hopefully there is a solution but my guess is that it has something to do with a printer preference file that can get hijacked by different printers and applications.
    I have noticed that a printer driver when installed will usually appear as the default printer even if it was not selected as such. I have also notice that different applications will do different things with different printers so I hope someone has a solution.

  • Controls won't change when a tool is selected.

    When I select a tool such as brush or eraser the controls at the top of Illustrator do not change tot the tools setting there for I can not adjust the tools settings such as size, softness etc.... How do I fix this?

    You may be confusing between Photoshop control bar and Illustrator... you have to double click on brush or eraser to invoke it's controls in Illustrator.

  • Time changes when switching from Windows to Mac, vice versa

    Hi,
    I am using Bootcamp to run Windows XP SP2 on my macbook. When ever I switch from one to the other (mac to windows, vice versa) my time will always be incorrect. I have to restart the computer everytime to switch, but when ever I just reset and load into the same OS as before, my time is fine. Anyone know what is wrong? It's really annoying to have to change the time or think its a certain time and it being wrong.

    Everyone gets that problem. Evidently Windows and Mac use a different reference point for the time, I think one uses Greenwich and the other local. On the Mac side you can go to System Prefs->Date & Time, and see if checking the box to "Set date & time automatically" fixes the problem.
    Francine
    Francine
    Schwieder

  • Microphone settings change when switching between a

    Hi all,?After much fun trying to get my mic working with my Xfi Elite Pro i am now having problems with the sound properties changing the settings when i switch between ap
    ps.
    If i sit with the audio properties open and set the mic to the line in 2/mic port it works, then if i fire up skype, msn, guild wars, bf2 or any other app in which i want to use the mic the setting switches back to the "microphone", i then have to minimise the app and force the setting back again.How can i get this setting to be permanently set to line in 2/mic?HELP!!

    Some applications will do this, check out this thread for a little tool that might be of some use to you:
    http://forums.creative.com/creativel...ssage.id=44236
    Cat

  • HT4539 new apple id won't change when trying to download updates

    why won't my apple id change on the main downloading feature for the apple store.  my new id is changed under the setting on my phone but when i go to download updates it still has my old id locked in and listed? so i have it changed on icloud and app store/itunes but when i hit the apple store icon on my phone and press update all it has my old id still locked in. how can i change this nothing is working?

    Did you update your existing account or create a new one ? If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.

  • Menubar does not change when switching apps

    Sometimes when I switch applications, the menu bar does not change.
    The proper menu bar is there, I can use it, but the text shown is some previously focused application.
    Switching apps once or twice fixes the issue, but it is very annoying.
    This is a fresh re-install of Lion, but I retained my users and applications.
    I have tried removing the systemuiserver plist file and rebooting, but the problem persists.
    Any ideas?

    A link would be nice but I suspect that you are not gettign the finger (you knwo what I mean) when you roll over the link because your href is  not set to anything.
    <a href="" onclick=MM_openBrWindow('images/image.jpg','largeDisplay','scrollbars=yes,resizable=yes,width=100,height=120')
    Set your href to "#" or "javascript:;" - the latter is preferred.

  • Printer Settings change when switching between printers

    First time in the forum, so please be gentle.  I know little about Adobe.
    I am working with Windows XP (SP 2) machines (I know - should be at least on Windows 7, but can't change what my company has) and have Adobe Reader 8.1.2.  We have run into a "bug" of sorts. 
    Many of our locations (these are PCs all off-site) print labels (pdfs) with a Zebra brand printer where the labels are 2.25 by 4.00 inches.  The Zebra printers are always attached directly to the PCs where they create these labels.  Sometimes, they want to send the labels to a Lexmark printer that is attached at a Primary Server elsewhere.  When they do that, they make sure to choose "Fit To Printable Area" under Page Scaling when the Print Box comes up so that the 2.25x4.00 label is enlarged to fit on 8.5x11 inch paper.  The problem we run into is that right now, the default settings for these Zebra printers is 2x3 inches and Portrait.  We need them to be 2.25x4 and Landscape.  The user makes those settings changes and saves them and it used to be those settings hold once they save them.  We also have to change our Lexmark settings to "Letter - 8.5x11", otherwise it defaults to "Custom-4.88x21".  Recently, there's been this bug where if they save the settings for Zebra, print something, it's fine.  They switch to Lexmark, print to it with "Fit to Printable Area" it's also fine.  When they go back to the Zebra printer, suddenly the saved settings are gone and it's back to default.
    This also is happening in the reverse - if the user usually uses the Lexmark, but switches once to the Zebra, then back to the Lexmark, the settings have defaulted again.  Someone here said they remember seeing something like this before in regards to Adobe Reader.  Does anyone have any ideas?
    PS - I am creating a new image which will have the correct default settings for our needs so that hopefully this will not be an issue in the future.

    Hi BigRedEO,
    Thank you for posting on the forums. This seems more like a printer issue as it is not retaining the settings.
    Kindly try updating the drivers for the printer and check.
    Thanks,
    Vikrantt Singh

Maybe you are looking for