Brush Preview Color

I am using Photoshop CS4 for Windows. I thought if I check animated zoom in Preferences>General, and select a brush preview color in Preferences>cursor, I could Alt+Click+Drag and not only see my brush changing size, but with color. It's not happening. Is it supposed do do this, or amu I doing it wrong?
Thanks!

photofanman wrote:
Hey thanks John. I think I had tried that but quite as soon as I saw the
eyedropper. Also, my GL wasn't enabled for some reason.
If your video card won't support OpenGL, Photoshop will disable it.

Similar Messages

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

In CC214 PS Why has adobe removed the "print Size Button" And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

Yea, and it's a pain to get to. What was the rational for removing the print size button? With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size. Of all the buttons you could have taken away, why not fill screen? I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop. The Brush preview window is unchanged in CC but in CC2014 it's basically worthless. If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
David Miller
[email protected]

Brush Preview

Just downloaded a CS5 upgrade on my PC. According to the learning videos with Lynda.com, when I click on the new bristle brush and select the brush tool, the brush preview is supposed to pop up. My does not, nor am I able to acess this at the bottom of the brush preset box which is indicated by the eye and brush together. Can someone help me figure out how to acess this preview? Much appreciated.
Stumped1129

Make sure that you have OpenGL Drawing enabled in Edit->Preferences->Performance. If it is then go to View->Show->Brush Preview

Bug ACR 7.2 adjustment brush previews

I realize this is a redundant post - I want to make sure someone at Adobe notices. Adjustment brush previews are turning off when you hover the cursor over the edit pin, and stay off until off until you hover cursor over another pin. Neil Carboni took the time to make screen shots that show the problem. See previous post and my Windows 7 x64 specs at http://forums.adobe.com/thread/1083526?tstart=0
The Adjustment brush previews work as expected so long the Show Mask option is checked AND one of the of the Adjustment Brush pins is selected; so one mask is always showing.
For example, when a previously edited image is first re-opened in ACR, no brush pins are selected (Show Mask can be checked). If I hover my cursor over one of the pins (for example I have 6 brush adjustments) the mask flashes on for the associated edit, as expected. When I move the cursor away, the edit preview disappears as if the edit never happened, but the pin remains. I then select one of the pins by clicking on it to make that edit live. Now when I move my cursor over a pin the mask for that pin flashes on, when I move the cursor away from that pin the preview of the edit is showing. Now the preview works for any brush edit.
Makes working with multiple adjustment brushes extremely difficult - not always sure if the results of a previous edit are showing. Have to constantly move my cursor and hover it over another brush pin to verify that I am seeing results of previous edit. If the preview is not showing, as soon as I put down the brush on that edit, the preview springs to life. I do not see this problem using ACR 7.1 on my Vista x64 machine.
As my previous post indicates, I have updated the driver on my FirePro V4900, uninstalled and reinstalled Photoshop, etc. Did not see the problem after I reinstalled Photoshop and briefly used ACR 7. Problem came back once I updated.

Well, for one, the current version of ACR is 8.3 by now.
More information would be needed about your system before troubleshooting steps can be suggested.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0 Thanks!

Brush preview much smaller in Photoshop CC 2014...how to make bigger?

Hi There,
I noticed in the new version of photoshop CC 2014 that the brush preview size in the brush window is much smaller then before.
Is there anyway of making this bigger? Any help or recommendation would be awesome.
Thanks!

That doesn't help me or people will large displays. I hope it's something that they will correct because that preview really helps me
understand how my brush will apply on the screen and possibly interact with other brushes that I've already done on my artwork.
Do you have any say on how Photoshop makes it's changes and updates?
aleX

Brush preview size does not match brush stroke

The brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works.
Does anyone have a solution for this problem?
*I use a wacom tablet.

Is your system cursor size set to something other than normal?
under Apple, System Preferences, Universal Access.

Brush Preview Broken? PS CC 2014

Hello. Just upgraded to PS CC 2014, and have noticed that a reasonable brush preview only works with a tiny brush. A generous sized brush seems to break the preview. Anyone else getting this?
• Troubleshooting so far: "Reset Brushes..." via Preset Manager (no impact).
• Screenshots below were created with a standard brush (second brush in the default presets). The only customization I did was to turn the spacing down to 1% (though the default 25% still looks screwy) and to turn on pressure sensitivity/pen pressure for my wacom (though it looks screwy even without sensitivity turned on).

Hi Benjamin,
Yes I see your problem and I'm having it too. In fact it drives me crazy, I've tried calling adobe on it but no one seems to know how to fix it. I will try again tomorrow and let you
know what they say.
aleX

How to disable anoying and slow stamp brush preview? CS5

Hello,
i have this problem in Photoshop CS5
as always, with nev version we got new features which nobody needs and slow down the performance... and/or workflow
for example: anoying preview under the stamp brush, which is unbelievably slow and cannot be turned off
next thing is brush shape preview, i often use large brushes and i need to see the whole shape, not just one quarter of the brush, please change that
thanx

If not for the new features, why upgrade Photoshop?
You have video driver problems. You are also likely wrong that OpenGL Drawing is turned off on your system, assuming by "stamp brush preview" you mean the overlay preview inside the brush for the Clone Stamp tool, because with OpenGL disabled you wouldn't be seeing that overlay. Keep in mind that when you make OpenGL changes in the Edit - Preferences - Performance menu you should close Photoshop and reopen it.
Why do things work differently in CS5? The simple answer is that Photoshop demands more of the video drivers than its predecessors. And your computer / software setup isn't up to the task.
Chances are it can work better... Download the latest driver for your nVidia video card. http://www.nvidia.com/Download/index.aspx?lang=en-us
By the way, the Clone Stamp overlay (assuming that's what you're describing as the "stamp brush preview") is not "unbelievably slow" on most peoples' systems - it's perfectly interactive and a real help. To turn off the Clone Stamp overlay, choose Window - Clone Source, then uncheck the [ ] Show Overlay setting.
-Noel

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I hav

I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head. Todd gets a blurred dark tone pretty much regardless of the options he uses.
IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt. I would not choose to use the Patch tool in this situation. Content Aware Fill makes a better stab at it.

Problem with brush preview in PS CS4

When my instructor shows the brush preview mode, his brush looks like the selected brush, which means that if there's a lot of feathering on it, he can see that. In the same mode and with the same cursor settings in the preferences, I only get a circle indicating the size of the brush. There's nothing to see about the relative hardness of it. COuld this be because I'm running on Windows XP? If not, how can I get to see the brush the way he does. Thanks for your help.

cheska99 wrote:
Can you use Open GL with Windows XP (if your video card supports it, obviously). For some reason I keep thinking you need Vista.
Yes. Read this Knowledge Base article on OpenGL in Photoshop.
http://www.adobe.com/go/kb404898

Mac. brush preview not anti aliased.

not sure if this is a bug, my friend recently bought a mac and is running CS6, the brush preview doesnt seem to be smooth as usual, as you can see the hardness is 50% and should have a soft edged preview display, but thats not occuring, and the brush also draws with hard edges in the preview window, this was the default soft edged brush selected first.

That looks like you might be using the Pencil tool (notice that none of the previews are gray, just black and white).

Brush tool color mode vs layer color mode

When using the brush tool what is the difference between using
the brush in color mode on a normal layer vs using
the brush in normal mode on a color mode layer?

Tools do not have dynamic Blend modes, Fill or Opacity adjustment settings as the Layers do. You can set opacity on a tool,but once you make that stroke, it stays at that setting. You can always change the blend mode,opacity or fill on a layer. That's just one difference I know about.
Here's a great reference on Blending modes.
http://photoblogstop.com/photoshop/photoshop-blend-modes-explained
Gene

Brush Preview Problems, please help.

I can't get the red brush preview to work. I can change the brush size through the shortcut (alt, right-click, drag), but it doesn't preview.
Also, when I try to change the hardness, I get no preview at all either. The command works, but all I get it a round hairline.
Thanks in advance for your help
Jose

Wolf, thanks for your reply! I think I read somewhere that OpenGL only runs on Vista? Or mabe 64bit OS? I'm not sure...
I'm running Win XP 32bit SP3 with an nVidia, NVS 290, 256MB dual DVI Graphics Card and dual monitors.
Thanks in advance,
Jose

Brush for Color

Is there a brush in Aperture that allows you to brush out color? I played with the levels but I can't find a brush to only apply them to a specific area.
Thanks!!

Hi Shawanak,
Welcome to the user supported Aperture discussion group.
Yes, you can pretty much use any adjustment as a brush. It sounds like you want the black and white adjustment. From your adjustments HUD, Click the Adjustment dropdown and select Black & White. This will put the B&W brick into your set of adjustments. Then click the gear icon in the B&W brick. Choose "Brush Black and White in" and you can then use the effect only where you click and drag.
If you want to remove a specific color, you can use the Color brick and follow the same sort of routine.
nathan

Brush Preview Color

Similar Messages

Maybe you are looking for