Brush Tool is not working with Layer Mask

Working with Windows platform, using Photoshop CS4, Brush Tool is not working with Layer Mask, how can I resolve this challenge?

Also, do you have any Selections active - maybe hidden?
When you have your Layer Mask's Channel active, do your Colors change to black and white?
Good luck,
Hunt

Similar Messages

  • Gradient tool to show hide not work in layer masks

    I have a PS CC (201410204.r.310X640 subscription.   When I used CS5 I could use the gradient tool (black and white) to show hide content in a layer mask.  This achieved the correct smoothness I want to achieve.  In CC the tool does not work in layer masks -it removes too much or the reverse, etc.  I have no control at all over what is removed and not.   Is there a fix for this please.   The lack of the gradient tool for this effect is making CC not worth using at the mo to be honest and I am just about to give up on it.
    Many thanks for any help you can offer.
    Susan

    Thank you for the replies and I apologise for havingn taken so long but have been busy with one thing and another for a few days.
    How to explain?   What I mean is that if I have an image and I, say, then, for example, add a texture image, I could then add a layer mask to the texture lay and working in the lay mark remove or replace the texture mask as I wished... in CS5 I usually used the diamond gradient in little tiny strokes, if necessary, and this removed the texture in with a nice smooth gradient - or replaced it, depending on whether I was using black or white
    Now it does not matter how I use the gradient tool, each 'stroke' just moves the exposed part to a different place in the image
    and no matter whether the colur is set to black or white, each 'stroke' moves the exposed part to another place in the image.
    In order to replace the texture, I have to use the paint brush tool.
    I hope all this makes sense to you clever folks.   I have not reset preferences and tools but it has made no difference.
    Also, I apparently have PS versiib 2014. 2.2 Release   20141204.r30 x 64   - I have updated several times but do not know if this is the correct version.   Any ideas gratefully received.
    Many thanks.  Susan

  • Is their a fix for photoshop elements 11 move tool? Not working with Yosemite OS upgrade.

    Is their a fix for photoshop elements 11 move tool? Not working with Yosemite OS upgrade.

    Hi,
    We sincerely apologize for the problem customers are facing while using a trackpad with Photoshop Elements 11 & 12 on Mac OSX 10.10 (Yosemite).
    We have been actively working with Apple to resolve this problem as quickly as possible. We're hopeful this will get completely resolved in an upcoming update of Yosemite(MAC 10.10).
    In the meanwhile, you have two options to work around this problem:
    1. Option1: Use a mouse instead of the trackpad
    2. Option2: Install a plug-in which should workaround the problem
    Plug-in installation instructions:
    1. Close Photoshop Elements
    2. Download this zip file to a location you can easily find (e.g. your desktop)
    3. Unzip the file, WhiteWindowWorkaround.plugin, and move it to the Plug-In folder:
    • For Elements 12 – //Applications/Adobe Photoshop Elements 12/Support Files/Plug-Ins/
    • For Elements 11 - //Applications/Adobe Photoshop Elements 11/Support Files/Plug-Ins/
    You can verify the plug-in is installed by launching the Photoshop Elements Editor and choosing Help > System Info... Scroll to the bottom of the text in the dialog and look for the plug-in name "WhiteWindowWorkaround.plugin".
    Note: This plugin is a temporary workaround and should be used until this issue is addressed in Mac OSX 10.10 (Yosemite). Please remove this plugin once the issue is officially resolved by Apple.
    If you are using a stylus in conjunction with a trackpad, you might see issues with your trackpad. Workaround in this particular case is to use mouse instead of the trackpad.
    Hope this helps!
    Regards,
    vaishali

  • Brush tool is not working.

    For some reason, my brush tool randomly stops working, even the preview thumbnail won't show a brush stroke. Also, my eraser has been acting up, first only adding black, then erasing layer and I can't set it to white. I have PS Elements 10.

    For some reason, my brush tool randomly stops working, even the preview thumbnail won't show a brush stroke
    - I think that you have a non-zero fade value in the brush settings dialog box. This causes the brush stroke to fade away after some strokes. Click the brush settings button in the option bar of brush tool and make the fade value as zero.Er
    Also, my eraser has been acting up, first only adding black, then erasing layer and I can't set it to white
    -Eraser tool eraser the color to transparency if you are on a non-background layer. Otherwise if you are on a background layer it paints with the background color. Press shortcut "D" to set the default background color to white and now use eraser tool. It will erase layer if  you are on a non-background layer and it will paint with white if you are on a background layer.
    Please tell if this helps.

  • Pro Tools 10 not working with 10.7.5 HELP!

    My reading suggests that Pro Tools 10 will work with 10.7.4 . My mid 2012 macbook pro came with 10.7.5 and it looks like trying to roll back to 10.7.4 will crate other issues with Safari, iphoto, etc. I tried to install the late 2012 10.7.5 update which fixes some programs not launching, but I get an error mesage saying that my harddrive does not meet the requirements. Huh? It's a 750 g standard isue partitioned to use boot camp as well.
    I'm desperate. I need my recording studio to work!! HELP!

    That is because your Mac came with a special build of Lion made just for the newest models, it contains the correct driver set for the newer hardware in the new models. You may have to do a complete reinstall over the top of your current install from the Online Internet Recovery system, IE Not the Recovery HD partition on the internal drive, to get the correct 10.7.5 build for your model.
    As to Pro Tools 10 working on Lion 10.7.5 you would need to contact Pro Tools and ask them.

  • The obfuscating tool Dasho not working with jre 1.5

    I have a issue that Dasho (newer and old versions )does not work with JDK 1.5 . Earlier we used JDK1.4 version in which it works.
    Have anyone faced this issue or worked the dasho please give some idea .

    We made the move from DashO to yGuard (for various reasons)
    before we made the move from JDK 1.4 to JDK 1.5.
    Google suggests DashO supports JDK 1.5, even JDK 1.6; [DashO change log|http://www.preemptive.com/dasho-change-log.html].
    Preemptive Solutions offer support.

  • Paint brush not working on layer mask

    This is a totally novice question, but...
    When working with a layer mask, my paintbrush isn't showing up on the image. I can see the brush strokes on the layer mark in the layers sidebar, but no brush strokes on the image itself.
    I know it's just me doing something wrong...can anyone tell me what it is?

    I think you are not understanding how layers and layer masks work.
    Look at the following illustration.  The layers panel shows that the left of the image (The right is simply to make room for the layers panel and should be ignored) has solid blocks of red, green and blue.  The layer mask in the top layer (red) has a black rectangle which conceals that area of the layer, revealing the underlying layer.
    The mnomic we use is 'Black conceals and White Reveals'  So where the layer mask is white, the corresponding area in the layer can be seen, and where black, it is like a window looking through to the layers below.
    The Green layer also has a (smaller) black rectangle, so we can see the blue layer below that.
    The blue layer has an even smaller rectangle so we can see the checker board background which indicates transparency.
    Understanding Layer Masks In Photoshop

  • The eyedropper tool does not work with a hue saturation adjustment layer

    I am using PS CC 2014, and the problem I am having is that when I want to use the eyedropper tool to adjust the colour range affected by a Hue/Saturation adjustment layer, rather than selecting the colour in the Properties window for the adjustment layer, use of the eyedropper closes the properties window and changes the foreground colour in my palette.
    Here's the real hitch... the same thing happened to me at school last night where a) the Mac's are older and b) CS6 is still used.
    It's something with my user settings, to be sure, because the prof logged into his account on the Mac I was using in class to test it out, and it worked for him; we logged back into my account and it still did not work for mine.
    Any ideas?
    Thanks for any insights.
    RP

    Indeed Trevor, that did solve the problem. Clearly it was something I changed... wish I knew what. But, I have a list of all the settings changes I made before, so I can figure it out by making one at a time then checking...
    RP

  • White paint will not work in Layer Mask

    I just installed PS CS6 and when I apply a layer mask to a layer I can paint black to hide the layer, but when painting white to restore the layer there is no effect.  White paint will not restore the layer or modify the mask at all.  The black paint works as usual to hide the layer, but how do I restore an area in a layer mask if not painting white?
    Thanks for any help with this.
    Troy

    That was it.  The blending mode for the brush was set to Darken which doesn't affect black, but obviously does affect white. 
    Thanks alot!
    Troy

  • NVIDIA Tools now not working with PS CC, is there any other add-on besides NVIDIA that will open .DDS files in photoshop?

    I had no problems with CS6 PS, but since I upgraded to PS CC, NVIDIA Tools is now not working and crashes when I try to reinstall the plug-in into PS CC. I checked NVIDIA's forums and found ZIP from them about this problem. So I am asking in here, is there another plug-in that will open .DDS files in PS? I am using Windows 7 Ultimate x64 for the OS, and I know the PS CC is 32 bit. Until I can resolve this issue, I am unable to do repaints of PMDG aircraft for my VA. Any suggestions would be greatly appreciated.

    I had a similar issue but i solved it following the instructions explained here https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA.
    I also reccomend you to install the bbswitch package which disables NVIDIA discrete graphics card when isn't used.

  • Signature Tool is not working with version 11.2.3

    It appears that the signature pen does not work.  It even looks like it is not lit up.  This is just a test form created in Adobe Acrobat X Pro.  The signature does not work in other forms that worked with the prior version of Adobe reader for iOS.  All one needed to do was sign documents by pressing the signature pen or long pressing to sign.
    The signature tool does work on a PDF document but the form above is a fillable/saveable form created with be Reader Extended PDF which allows data entry and saving.
    Thank you in advance for any help on this.

    After some further testing it appears that the signature function is not availible on forms with the Reader Extended version.  Just using normal form seems to work.

  • Paint brush tool doesn't work with my Wacom tablet

    My new pen tablet works well except when I try to use the paint brush tool. I was using NIK Color effects pro plug in and when I select the paint brush mode it didn't work. So I just tied the paint brush tool without going thru NIK and it still didn't work with the pen tablet. There must be something I haven't set correctly but can't figure it out.
    Other tools work just fine such as the patch tool, etc. Any ideas?

    try reseting the paint brush and download the newest driver from Wacom

  • Spot healing brush tool luminosity not working as expected?

    I have a question about the content aware spot healing brush tool:
    The normal and replace mode work just fine as expected... the color mode does indeed a fine job fixing the color cast of i.e. small green or purple lens flares, by picking up the surrounding color.
    The next mode after color, called luminosity, should work in the same fashion: it should pick up the surrounding brightness (luminosity), and adjust the relative brightness of the area to be patched (i.e. reduce the brightness of a small lens flare, and preserve the texture underneath).
    Instead, luminosity doesn't work much different than the normal mode, it creates a new texture (based on content aware or surrounding area), and thereby destroying the original texture, instead of just fixing the local brightness.
    My question for Adobe: is this behavior intentional? or was the luminosity mode "overlooked" by accident?

    Here are some examples of how the brush is working in a real world example:
    As I have mentioned, normal, replace, and color work exactly as expected. color in LAB mode works even better than in RBG mode.
    what is not working as (at least by me expected) is luminosity mode (even if the color mode brush is used first). I thought/had hoped for that the luminosity mode would work some magic without creating new textures (the color mode is only very very lightly adding a new texture).
    I just wanted to hear what the logic behind this mode is... (and possibly find a 1-2 click tool to fix those lens flares.)

  • [URGENT!] illustrator rectangular tool is not working with adjusting the size!!!!

    Other tools are working well otherwise the only rectangular tool has problem whenever I try to adjust the size.
    I tried 'show bounding box(shift+command+B), but it's still not working.
    Please help me with this problem and find attached pics.
    The pics above are the captured screen we could find on PC, but on Mac the size is not adjustable. :-(

    tomato,
    I am afraid you have come across the Live Rectangle bug which is limited to the MAC versions starting with 10.7 and 10.8, but not 10.9 (Mavericks) or 10.10 (Yosemite). Hopefully, the bug will be fixed soon.
    So a switch to Mavericks or Yosemite with a reinstallation might be the way to solve it here and now.
    To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool or the Free Transform Tool.
    A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
    https://forums.adobe.com/thread/1587587

  • Touchup Tool does not work with PDF

    I am creating my own pdfs and when I open in acrobat pro I cannot select my text using the touchup text tool. I can select the text when I am just using a cursor, but the touchup text tool cannot seem to find it. The pdfs I am creating are very simple, but they work for everything I need them to work for except the touchup tool. Is there some coding I have to put in to make the text editable? Thanks for any help.
    1 0 obj <</Type /Catalog /Pages 2 0 R >> endobj
    2 0 obj <</Type /Pages /Count 1     /Kids [3 0 R
    ] >> endobj
    3 0 obj << /Type /Page /Parent 2 0 R /MediaBox [0 0  612  792] /Contents 4       0 R /Resources 5       0 R >>
    4 0 obj <</Length 44     >> stream
    BT   /F1   12.0 Tf  34  763 Td (A) Tj ET
    endstream   endobj
    5   0 obj <</ProcSet[/PDF /Text]     /Font<<
    /F1 6 0 R >>

    It does not say anything about about the pdf being broken when I open it in acrobat, where is the problem with it? I have a program that created this pdf file so I do not know how to fix it if it is broken.
    %PDF-1.4¹º»¼
    07/14/09                                           
    1 0 obj <</Type /Catalog /Pages 2 0 R >> endobj
    2 0 obj <</Type /Pages /Count 1     /Kids [3 0 R
    ] >> endobj
    3       0 obj << /Type /Page /Parent 2 0 R /MediaBox [0 0  612  792] /Contents 4       0 R /Resources 5       0 R >>
    4    0 obj <</Length 44     >> stream
    BT   /F1   16   Tf  34  763 Td (A) Tj ET 
    endstream   endobj
    5   0 obj <</ProcSet[/PDF /Text        ]          /Font<<
    /F1 6 0 R >>                           
                                                     >> endobj
    6   0 obj <</Type /Font /Subtype /Type1 /BaseFont /Courier                             /FirstChar 1 /LastChar 255 /Widths 7   0 R /Encoding /WinAnsiEncoding  /FontDescriptor 8   0 R>> endobj
    7    0 obj [600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 ] endobj
    8   0 obj <</Type /FontDescriptor /FontName /Courier                              /FontBBox [   0 -300 1000 700] /ItalicAngle   0 /Ascent 720  /Descent -280 /CapHeight 680  /Stemv 105  /Flags 42      /FontWeight  400>> endobj
    9    0 obj <</Type /Xobject /Subtype /Form /BBox [-999 -999   1000 1000] /Matrix [1 0 0 1 0 0] /Resources 5   0 R /Length 43      >> stream
    BT   /F1   12.0 Tf  34  763 Td (A) Tj ET
    endstream endobj
    10     0  obj <</Type /ExtGState /ca .15>>endobj
    11     0  obj <</Type /ExtGState /ca 1 >>endobj
    xref
    0 13
    0000000000 65535 f
    0000000068 00000 n
    0000000117 00000 n
    0000000180 00000 n
    0000000298 00000 n
    0000000401 00000 n
    0000000562 00000 n
    0000000754 00000 n
    0000001796 00000 n
    0000002023 00000 n
    0000002227 00000 n
    0000002277 00000 n
    0000000000 00000 n
    trailer <</Size 13   /Root 1 0 R>> startxref 2346      %%EOF

Maybe you are looking for