Brush Tool will increase, but won't decrease in size

When using the brush tool, I can increase the brush's circle by pressing down the right square bracket, but when press down the left square bracket, it diminishes then immediately increases back to its original size again and does this repeatedly until I let go of the left square bracket. Any help to locate the source of this error would be appreciated.

Edit >> Keyboard Shortcuts >> Tools
Check what you have here. Try changing temporarily to another to see what happens.
Also check you don't have a foreign keybaord layout Apple OS >> System Preferences >>International  >> Input Menu
Check Show Input Menu in menu bar  checkbox at the bottom (easier to check that way without scrolling to see if you have multiple languages enabled and which is enabled)

Similar Messages

  • I can not play a video on my iPad mini. It will load but won't play

    I can not play a video on my iPad mini. It will load but won't play

    Which video, in which format, trying to play how in the Mini?

  • PS CC 2014 - Brush tool will not draw a continuous line

    Brush tool will not draw a continuous line, I am on a macbook pro.
    Click and drag - I only get a spot.
    Very frustrating.

    Thanks for your answer PK. I really expected this to work as an ok workaround.... Now I've found that I cannot even cmd+tab back into CC.
    Let's say I tab out into Safari. I get the Safari window on top of CC. I tab back to CC and nothing happens.
    So I have to click back into the CC window to bring it back.
    Does anyone know if that is a bug that Adobe are looking into?

  • HT201401 Problem with my iPhone 4S volume, my phone will vibrate but won't ring...

    I Have a problem with my iPhone 4S volume, my phone will vibrate but won't ring. IS IT EASILY REPAIRABLE?

    if it play when you connect a headset
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more
    https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

  • HP Officejet Pro L7590 (L7555) has legal size flatbed but won't scan legal size documents - WHY?

    HP Officejet Pro L7590 (L7555) has legal size flatbed but won't scan legal size documents - WHY? Scanning to a Macbook Pro osx (10.6)

    Hey there. What application are using to scan? Have you tried using a different application like Preview or Image Capture?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • 2nd. gen. shuffle volume (on wheel) will increase but not decrease

    My 2nd. gen shuffle will increase the volume using the wheel but it will not turn back down using the wheel. to reduce volume you must reset by turning off- then on. I have turned the max vol (using windows computer) both on and off and this does not affect problem. When you reset the volume is about mid point and again you can increase using + wheel but not decrease with -. the other wheel and all other functions are perfect.

    Not looking good if you ask me especially since the problem was persistent across two different PCs and the reset utility did not help.
    B-rock

  • PSE7 suddenly won't allow me to use the brush tool on anything but transparency

    I was just doodling when the brush tool suddenly stopped working. After a bit of inspection, I found it would only let me draw on transparent areas. What's the fix for this?

    Your brush mode in the tool options bar might be set to Behind.
    The default brush mode is Normal.
    MTSTUNER

  • DVD will read but won't write A205-S5812

    My DVD drive will read and play but won't write. Device Manager says it is a Matshita UJ-850S. I have upgraded to XP Pro sp3 from vista. I suspect that it is a driver issue but I have searched and can't find one that makes it work.
    Has anyone else run into this? Any suggestions
    Solved!
    Go to Solution.

    Borsiay wrote:
    My DVD drive will read and play but won't write. Device Manager says it is a Mat**bleep**a UJ-850S. I have upgraded to XP Pro sp3 from vista. I suspect that it is a driver issue but I have searched and can't find one that makes it work.
    Has anyone else run into this? Any suggestions
    Not a driver issue, or it wouldn't even read.  You are missing the program required for disk writing that Toshiba suppiles with factory installs, but is lacking in commercial versions of Windows.  It is not available as a download, only as part of the factory image.  Since you changed to XP, You'll need to buy some disk writing software like Nero or Roxio.

  • Hp officejet pro 8600 plus will print but won't scan.

    Recently I had some kind of software conflict with my printer in Windows 7 so I deleted it and reloaded the printer software. I selected enable scanning at set up. It is a network printer and everyone can print to the printer. When I went to scan today the printer sees my computer and will let me select scan but I get a screen error on the computer and then the printer says the scan was unsuccessful. I checked the IP address which of course is good.
    The Error says "Scanner Unreachable" X Scanner communication cannot be established. Ensure your product is powered on..... If you are installed using a cable check it...... If you insalled this printer by IP address then you might need to update IP address....... If you are running firewall software, it may be blocking the scan communication. Go to HP.com/go/wirelessprinting for help. -"
    I turned off my firewall and my virus software and I get the same error. I restarted the computer, router, modem, and printer a couple of times. The frustrating thing is the printer sees the computer from the touch screen but just won't complete the scan.
    Any suggestions?

    Hi AccessRE,
    Please let me take a moment to say "Welcome" to the HP Forums. I hope you enjoy your experience!
    To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having an issue scanning to the computer over the wireless network.  Please click on the following link for A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
    Please write me back if you are still having issues.
    If I don't hear back from you today, I hope you have a great Monday.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • MSI GE70 Laptop will start but won't boot

    Hello
    I've had my GE70 for almost two and a half years now and it has recently started to show a few problems.
    A couple weeks ago the laptop started to freeze whenever I moved it too abruptly, particularly when holding/pressing the case near where the HDD is installed.
    Now, I took it on a trip with me, and when I tried to turn it on, the fan would spin, the CD/DVD drive would run, and the power light would also turn on, but it wouldn't boot (won't even get to BIOS, just a black screen). The laptop doesn't boot because capslock/numlock lights do not turn on. The HDD seems to be working because its light blinks once as soon as I try to turn it on.
    I've tried:
    1. Swapping memory card slots
    2. Removing the memory cards and turning on (motherboard does not beep, is that a signal that something's wrong with the motherboard?)
    3. Reseting the EC
    However, nothing seems to work. Can't send it to a MSI repair shop because I am currently living in Brazil and apparently there's no MSI official repairer here.
    Any ideas on how to solve the problem?
    Thanks!

    Try to remove all the storage devices and see if you can enter the BIOS menu.
    If not, then it's likely that sending it to the service center will be your only hope.

  • IMac G5 will chime but won't do anything else-

    Hi all! Before posting I made sure to read as much as I can in this forum & various sites so that I won't be repeating a previous post. So I apologize in advance if I do. So on to my problem…
    When I press the power button on my iMac G5, the chimes go off, but the screen stays black. Then after a few minutes, the fan goes full blast. Here are the different things I've done.
    a. Plugged and unplugged the power cord and used different outlets.
    b. Reset the SMU
    c. I followed the instructions from http://support.apple.com/kb/ht2173 (I don't know if this matters but LED 1 and 2 light up)
    d. I inserted the "Mac OS X Install Disc 1" to run Disk Utility but nothing seems to happen when the disk is inside (I do hear the CD being read and spun around). I couldn't get passed step 1 with the instructions from this previous post http://discussions.apple.com/message.jspa?messageID=11426662
    I've had problems in the past and most of the time it's fixable. But nothing seems to be working now. Are there any other tips or suggestions you all might have?
    Thanks for your time, I greatly appreciate it!

    dapnoyqpid,
    So everyone has given you very good diagnosis and repair paths. If you look at Jim Warholics site and determine that you have bad capacitors. (Be aware that just a tiny bit of doming will indicate a bad capacitor.)
    So if after you survey all the capacitors in your iMac you find that you have just a few bad ones you can buy the kit from Jim and attempt your own repair.
    Read this thread first:
    http://discussions.apple.com/thread.jspa?threadID=2287036&start=0&tstart=0
    Now I recently got 2 iMac G5 20" 2.0 GHz machines donated that both had the capacitor problem. They both had the RAM maxed out at 2 GBs so I was licking my chops as they were sorely needed at the school for a video GarageBand class.
    I took both of the backs off and surveyed the capacitors. One had two bad ones but the other had 12! I actually had a bad 2.0 GHz 20" iMac w/ a bad power supply sitting in my "to be repaired" area. It also only had two bad caps on the logic board.
    In starting the removal of the two bad caps I was reminded how difficult this process was so I just heated the through board leads until I could move the leads up to that I had about 1/4 inch of a gap between the bottom of the cap and the logic board. I then cut the leads off as close to the bottom of the cap as possible and tacked soldered the new caps on. I used a Xacto knife to do the cutting. Be very careful of fingers and don't cut the logic board (Did that on an old G3 iMac and it was very dead afterwords) or damage any of those tiny SMT parts.
    Here's some pictures:
    http://s291.photobucket.com/albums/ll306/spudnuty/iMac%20G5%20capacitor%20repair /
    Turned out these caps had to lay down since they were in the area where the spring loaded box where the foot attaches.
    Those two iMacs are now back in action and ready for the summer camp video students.
    The one with the 12 bad caps is now at the back of my "to be repaired" area waiting for a day when I'm really bored with nothing to do.
    Good luck.
    Richard
    Message was edited by: spudnuty
    Message was edited by: spudnuty

  • Print issue... will print, but won'trint something,

    Hi all,
    I just bought an Epson Stylus NX215. I installed the drivers etc, and everything seemed peachy keen. However, if I go to print something, it comes up with the usual window but when I click "print" it just shows the button being clicked(or depressed, whatever you want to say) and it won't print. I can print test pages, and "alignment" or whatever pages but I can't print documents. THis is throughout all applications. Thanks in advance.

    HI,
    It's likely the printer drivers are not compatible with 10.6. Go to the Epson site support area and look for driver downloads. Hopefully they will have an update soon.
    Try here for more information.
    http://support.apple.com/kb/HT3669
    Carolyn

  • HP Officejet 4500 will print but won't scan - MAC OS 10.6.8

    Hi
    We've been using our HP Officejet 4500 for about 3 years with mostly no issues. Recently, we were having some issues. We uninstalled the software and then used Apple Software Update to reinstall. Now the printer works perfectly for printing wirelessly. But scanning is not even an option. I cannot scan from the control panel on the printer. When I go into system preferences, the little printer icon says "Print & Fax", not "Print & Scan" and there is no scanner option to be found once I am in "Print & Fax". I used to have an HP Scan program on my Mac that I could open and scan from there but now that is gone. The HP website tells me to simply use Apple Software Update for drivers and software. Apple Software Update tells me I have everything I need. I have performed "Repair Disk Utility", rebooted, deleted the printer and added it again. 
    Please help. Thanks.

    Hello @Yakbihn ,
    Welcome to the HP forums.
    I understand that you are having problems scanning with your officejet 4500.
    I would like to help.
    HP Scan software is not available through Apple Software Update (ASU) for some HP Multifunction Printers.
    And as you and I know, The Drivers are not available on HP.com.
    There are still ways for you to scan.
    The links below are for a laserjet and the other 10.9
    The steps will be the same.
    HP LaserJet MFP - Scan in OS X 10.9, 10.8, 10.7, or 10.6
    Scan from OS X v10.9 Mavericks
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Working on 5 movies at the same time and one will not open. It is there and will play but won't open and I can't share it or move file.

    Working on a project with 5 movies at the same time andone movie project will not open    I can see it and play it but can't open to work on it or  share or copy it, what should I do?

    WHat version of iMovie?
    ANd for iPad or iPhone?
    Are you having issues opening a video you took on the device?
    OR an issue opening a project you previously created?

  • My HP officejet pro 8600 will print but won't scan wirelessly

    My officejet pro 8600 will print and scan with a usb connection. It will also PRINT when connected wirelessly but it doesn't  SCAN wirelessly. Running OS X Yosimit 10.10.2. thanks  John

    Thanks John!
    I'm still curious as well, do you get that same error regardless of initiating the scan from the printer or the software?
    At this point, I will suggest that you try resetting your printing system (don't re-add the printer just yet) and then perform a verify/repair of your disk permissions. Once those complete, restart your Mac and then add the printer back to the queue.
    Try scanning again via the HP software and then the Apple software. Please also ensure you try initiating the scan both from the printer as well as the software and let me know if there is any difference, thanks
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for