Brush with two lines showing feather border

Is there a way to set brush cursor to look like camera raw one or lightroom one, where You are able to see two lines( one showing feather border and second showing main brush area)
Is there a way to position picture on screen to not be displayed in middle of photoshop working area?

Checos Photography wrote:
Is there a way to set brush cursor to look like camera raw one or lightroom one, where You are able to see two lines( one showing feather border and second showing main brush area)
No, there is no brush cursor option with two outlines. The Full Sized brush Tip might be your best option, because it at least shows the full extent of the brush including any feather, if any. This is the way I work, if it helps.
Checos Photography wrote:
Is there a way to position picture on screen to not be displayed in middle of photoshop working area?
In Preferences > Interface uncheck 'Open documents in Tabs' or if already open, go Window > Arrange > Float in Windows

Similar Messages

Why are there two lines showing when I switch off my iPad where the cancel word is?

Why are there two lines showing on my iPad when I turn it off where the cancel word is.

You wrote:
"I have noticed that on my IPad Calendar, that on some of the scheduled appointments it is showing Phoenix as a time zone. On some it is showing Salt Lake City, and then on others it will show Denver. I can't quite see why or understand why that this is an issue since everything is set to Salt Lake City. On the ones that show up with Phoenix as the time zone the times change. Also I have had some of the times showing on the calendar at an hour different that when I open the Appointment. It will show the correct time, but on the Calendar it is sometimes different. "
From that information, it makes sense that your calendar is off.
Phoenix is in another time zone part of the year. When daylight saving changed, Salt Lake City and Denver changed, but Phoenix did not. You may have set time and date to auto, but the Mac knows the time difference and is compensating for it.

Create one internal sales order with two lines

When I try to use internal sales order cycle
I started with create internal purchase requisition with two lines,
Each one will supply from different warehouse
Run Create Internal Orders request
and then switch to Order Management responsibly
Run Order Import request with requisition number in parameter window
All of lines included in internal requisition in same internal sales with different shipping warehouse

it's seeded functionality.
What do You expect else?
You then ship to diferent ORGs with different deliveries. Everything is OK.
BR,
Eugene

How to add an animation to a text field with two lines?

I have a text field with two or more lines. Why isn't it possible now to apply a text animation?

For certain tasks, Titler and its Presets can be very good, and can simplify things greatly.
However, when one gets beyond the limitations of the Titler, I really like to create my Titles in Photoshop, and Import those as Still Images into my Project. I then use the power of Keyframing various Effects over time. This allows me much more control, BUT does require more hand-work. Still, that added control is too important to me, and I sort of like doing the handwork.
For the "alignment" of multiple Titles, to get multiple lines of Text, you can create the first Title, and then chose Duplicate Title. Initially, that will be identical, but you just change it, as is necessary. After you have changed that "second line of Text," place that Duplicate on the next Video Track, above the first Title, and use the Fixed Effect>Motion>Position, to move it down, to where it would be (by the height of the font, plus any desired Leading), if one had created a second line of Text on one Title.
I also like to use Alignment Grids, when things get critical, and create those in Photoshop, with a trasparent background, and just place them, on say Video Track 2, with all of my Titles above that. Just do not forget to remove any Alignment Grids, before you Export/Share the Timeline, or they will be part of the output video.
For more background on Keyframing (so very useful with more than just Titles), Steve Grisetti has done a multi-part tutorial, available as Basic Keyframing on Muvipix.com. I highly recommend it. Keyframing is simple to do, but can be a bit of a tough concept to grasp initially, and it's a subject that is tough to write about - takes longer to type instructions, than to do the work.
Good luck,
Hunt
PS - Do not know if you saw them, but Titler has two Alignment Tools - Align Horizontally, and Align Vertically, that can be helpful to center Text.

How to fax on a secondary line when you have 1 jack with two lines?

I have two phone lines accessible through one wall jack. The default line is my voice line. I wanted the secondary line to be the fax line.
I have set up the fax preferences and have specified the fax line (which appears to be just for header info). I can send a fax out but it uses the primary line. I have tried to send a fax to the machine but it doesn't catch the second line.
Is there something additional I need to set up or do I need 3rd party software or a second physical jack or some kind of line splitter for the jack.

Hello,
Go to Wal-Mart, or some other store that sells phone wire and adapters. Look for a small adapter that plugs into your phone jack.
It should specifically be labeled to split a two line jack into separate line 1 and line 2 jacks.
They usually have 3 jacks on them. Line 1, Line 2, and Line 1 + 2 (which would be the same as your normal jack).
Make sure it's not just a splitter, but also actually divides your phone lines. They usually cost about $3 to $6.
Radio Shack probably has them as well.
Once you plug that in, you can plug your phone into the line 1 jack, your computer's modem into the line 2 jack, and anything that can use both lines into your Line 1 + Line 2 combination jack.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Images with clean lines show up with steping

I'm building some site content with flash and having a heck
of a time with "stepping" or pixelized looking edges on
very good quality crisp images. How can I stop this from
happening?
I have also found this when creating flash galleries through
Lightroom.
So I'm guessing it has something to do with either the
default way flash compresses or handles the image.
How can I resolve this?
There must be a way to stop flash from doing this.

No there is no rotation applied to any images.
However many of the shots are architectural images and have
lines which are not 90 or 180 degrees.
these are the ones that show problems. Jagged edges which are
not cool and degrade the images
that are a very large part of the visual user experience.
Any ideas as to why this is happening and how to fix
it?

Whenever I hover over a tab, or other click-able item, an symbol with a red circle with diagonal line shows up. All sites do this. I downloaded FireFox four (4.0) yesterday, and that's when it began. What's going on? How do I stop this?

When I hover the curser over the box I'm writing this in, but before an characters have been typed, the symbol keeps showing up, on and off.

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

Dynamic Table Two lines per data item

Hi experts!!
In my form i have a table with two lines per data item for example the table i want the table to be:
boldheader rowbold
bold1,1 1,2bold
bold1,3 1,4bold
I have also wrapped the table in a subform, and marked the checkbox "Repeat Row for each data item".
Instead i get :
1,1 1,2
2,1 2,2
1,3 1,4
2,3 2,4
How can i display two rows per item ???
Thank you in advance!!!

If there are two lines in a single row for a table (I.e if there are 14 columns, How to be adjusted).
There are two possible ways of doing.
1) a) Create a SubForm
    b) Create a Table (If you create a table there will be Header Row and Body Row)
    c) Delete the Body Row and instead of it create a SubForm with name Body Row
    d) Now you have one Header Row and SubForm as BodyRow.
    e) SubForm BodyRow again create two SubForms with names Row1, Row2.
    f) Now make the SubFormBodyRow as Flow layout and repeat the SubForm(Since if you make this then the child nodes (Row1 & Row2) will inherit the properties of the parent node (SubForm-BodyRow).
   g) Now you can have two rows in one lineitem.
2) The second possible way is showing it in a Dynamic ToolTip.
    Lets say you have a table inside a table then you can show it in a Dynamic ToolTip when you place the cursor in a Student Id you will get Student Data.
Hope it solves.

Scanned document has two lines horzonal on the left side of paper

My Unit is
HP Officejet 6210 All-in one
Only when i scan document it shows up with two lines on the left side of paper as it is scanned.
The first line 2inches from the edge the line is only 1/16 wide all the way cross the paper
The second line is 4 inches from the edge of paper and is 1/4 inch wide all the way cross the paper.
I have cleaned the glass and white backer of cover did not change.
I ran the Hp Print and scan doctor it recommend contact HP customer service.
The problem is not during normal
I have inspected the glass and small part of the feed cartiage. I did not know how to remove it to inspect better.
Can you tell me what is causing the line traces during scanning operation of my machine thank you

Hi @JamesI
Do these horizontal lines appear when you copy too? I ask because copy and scan use the same hardware components, if the issue occurs when you copy too there is indeed an issue with the printer hardware. If the issue does not occur when you copy, the problem is isolated to the software.
In any case, it seems you have done all of the hardware troubleshooting; Horizontal Lines on a Copy/Scan. If you determine the issue is a software problem with scanning alone, let me know and we can go from there.
If it is a hardware issue, you can try a couple of things in addition to what you have already done, but if the issue continues, I suggest calling us.
Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
^ This is not limited to Laserjet printers.
Let's perform a hard reset. To do so, leave the printer on and unplug the power cable for 1 minute. While it is unplugged, hold down the power button on the printer for 10-15 seconds to release any built up power, then after the minute has passed, plug the printer back in.
If the issue remains unresolved, and you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Release of po when two plants with two difrent procedures

Hi,
i am having one po with two line items .one line item with one plant and other with an other plant.two plant have difrent releasing procedure.what r the customisations required to pick the system related releasing procedure when it pick item one releasing procedure for plant1 and item 2 releasing procedure 2 automatically.
Thanks,
Sydanna

If you are talking about the PO release process, then it is not possible ..
The PO release Strategy will be applicable to entire PO, Not for Line Item wise..
As the Plant will be at Item Level, If you set two release strategies for two plants,
then you will not get release strategy for PO,
If you delete the First Line Item then the Release Strategy for Second Line Item will trigger..
Similarly, If you delete the Second Line Item then the Release Strategy for First Line Item will trigger..
Try to Choose Header Level fields for PO Release process..
If the release process is for PR, Then check this Link
http://www.sap123.com/showthread.php?s=525f3288cbee4cb09d1d97b365f8c532&t=59

How to clear multi open item with multi line in FI?

Hi Colleagues,
     If I select two open items which amount is 50, 50, and I use FB05 to clear them, now one document with two line generated, one line is I entered outside, the other one is amount 100 open item which clears the 50, 50 two items.
     So is there a way to generate the clearing document like this: a document with 3 lines are generated, one line is I entered outside, the other two is amount 50 and 50?
     Thanks a lot.
BR,
Chris

Hi,
You can use transaction code F-30 to clear items as this transaction is combination of three transactions viz. F-03, F-44 and F-32. In the transaction code you ca even enter exchange i.e. no need to maintain separately as in case of F-03, F-44 and F-32 picks up the exchange rate as maintained in OB08. Hence there can be separate exchange rate for the same day which is not possible through OB08.
Hence, you can use only one transaction in case you want to clear G/L through F-03, Vendor through F-44 and Customer through F-32.
Hope, this solves your issue else revert.
Regards,
Tejas

RG23C PART 1 - Two line items for single item

Dear Experts,
I created a po for capital goods without any material number but entered the description of the capital good in material short text and processed.
while posting the excise details for the capital good in RG23C Part 1, it is posting the register with two lines with different serial numbers and updating the quantity as well.
how do i rectify it?
regards
Suresh

hI,
thanks for the quick reply
thats what happening exactly......how do i correct it.....or is it so that i dont have to do anything
the movement types for both entries is 101
regards
Suresh
Edited by: rasuresh on Aug 29, 2009 11:30 AM

OdiFileAppend tool issue with new line character?

Hello ODI experts,
I am using OdiFileAppend tool in a package to concatenate multiple files with same structure to a new file. ODI is installed in windows and also files exists in Windows only.
OdiFileAppend "-FILE=C:\ODI_WORK\FILE_LOAD_DIR\PROCESS_DIR\*.*" "-TOFILE=C:\ODI_WORK\FILE_LOAD_DIR\PROCESS_DIR\CONCAT_FILE.txt" "-CASESENS=NO" "-OVERWRITE=YES" "-HEADER=1" "-KEEP_FIRST_HEADER=YES"
First File:
CST_ID,CST_CODE,CST_NAME,CST_STATUS,CST_ID_PAC,CST_ID_CHO
-3,TWO,TXTFILE,A,864,
second File:
CST_ID,CST_CODE,CST_NAME,CST_STATUS,CST_ID_PAC,CST_ID_CHO
-2,ONE,TXTFILE,A,864,
output file by using OdiFileAppend tool is as below with two lines:
CST_ID,CST_CODE,CST_NAME,CST_STATUS,CST_ID_PAC,CST_ID_CHO
-2,ONE,TXTFILE,A,864,\-3,TWO,TXTFILE,A,864,\
How can we modify the tool to append records in a new line?
Thanks

Hi Murali ,
You are facing a Bug .
The Oracle Data Integrator (ODI) defect is referenced as <<Bug 6518478>> <ODIFILEAPPEND DOES NOT WORK AS EXPECTED>.
When Oracle Data Integrator (ODI) OdiFileAppend/SnpsFileAppend tool is used with -HEADER parameter set to 1 or higher, the resulting file is incorrect and a backslash ("\") character is automatically generated between the appended files.
This Bug is fixed in ODI 11gR1
If the generated file is to be used as Source Datastore in an Oracle Data Integrator (ODI) Integration Interface, to work around the behavior:
1. Appending the files using the OdiFileAppend/SnpsFileAppend tool without the -HEADER parameter (or use "-HEADER=0").
2. Then, in your Integration Interface, apply a Filter to the corresponding Datastore in order to remove the unused headers.
Thanks,
Sutirtha

Tree Matrix Report with double line heading

Hi,
I am very new to HTML-DB and HTML as well.
I need to create a matrix report with a tree functionality and with two line heading.
Basically This is what I need to generate
REGION1 REGION2 REGION3
COL1 COL2 TOTAL COL1 COL2 TOTAL COL1 COL2 TOTAL
===========================================================
CAT1+
Sub_CAT1
Sub_CAT2
CAT2+
Sub_SCAT3
Sub_SCAT4
Where CAT1 , CAT2 needs to be collapsible rows. SCAT1..SCAT4 are sub categories under main categories.
REGION1.... REGION3 are top level headings. And COL1,COL2 are sub headings under top level headings.
Thanks,
Shri

Please help me on this!
Thanks,
Shri

How to combine a bar with a line in a chart

Post Author: rbcdexia
CA Forum: Charts and Graphs
We want to combine data in bars and with a line showing in one chart.
Is that possible? How do you configure your chart?
The line and the bars are based on the values from different fields in the same table.

Post Author: pareshb
CA Forum: Charts and Graphs
We are using Crystal Reports for Visual Studio 2005. Can you please let me know how to combine a bar with a line chart.
Thanks in advance.Paresh

Brush with two lines showing feather border

Similar Messages

Maybe you are looking for