Brushes and other like tools

Hi.
I have downloaded the trial version of CS5 and everything looks great, except that any brush circle indicator starts of complete when it is at a small size but as soon as you make any of the brush tools larger the circle starts do break down. I contacted the help phone line but as I only have the trial version they will not help me, so I wonder if any of you smart guys and girls know of this problem and what causes it and how to fix it.
Thanks

Known issue with older nvidia drivers. Update your video card drivers

Similar Messages

Will Adobe be adding spot removal, adjustment brush and grad filter tools to lightroom mobile?

will adobe be adding spot removal, adjustment brush and grad filter tools to lightroom mobile?will adobe be adding spot removal, adjustment brush and grad filter tools to lightroom mobile?

We don't know (and anybody who knows can't say). It's an unanswerable question...

Difference between itunes and others like vudu for downloading bought movies

when buying & downloading movies, what the difference between Itunes and others like VUDU, Netflix, etc

Vudu and Netflix are streaming services. Netflix is a subscription service, Vudu is a rental service.
Itunes sells and rents content that you download to your computer.

Install "Make" and other unix tools on 10.5

I am new to Macbook but accustomed with other unix computers.
I want to have unix tool "make" available on Mac 10.5.
Where can I download this and other tools? Are there pre-built binary distributions?

xcode sounds like a helpful hint, thanks.
Now the box with the installation media is here, while my wife and the computer are abroad for a few weeks. Can this xcode be installed by download from somewhere?
(Of course I tried to enter "xcode" in the top right search box on this webpage, but I end up at a server error page not found page (does apple's own search function not create correct links?).)

How to get photoshop to go back to default brushes and other kinds of settings?

I was messing around with phothoshop when I first installed, it and when I opened it again, I noticed that it saves what you last did, with brushes and pens and other things that you probably use a lot. So my question is, how do I get it to go back to the first things that were selected? Does this make any sense?

Hello!
In addition to Mylenium's advice, you can also reset Brush settings by:
You can also reset your workspace by the following:
Here is a step by step video on how to reset Photoshop's cs6's preferences file:
Please post back if you have any more questions,
Janelle

Healing brush and clone stamp tools are not working - Photoshop Elements 11.

Anyone have suggestions on why the tools stop working?

Reset the tools. Look for this> and reset all tools
If that does not fix it, reset preferences to default. Go to Edit menu>Edit>Preferences>General and look for this
Close PSE and relaunch

X I and other integration tools

can any one tell me ...the advantages & disadvantages of XI comparing with other integration tools...

Hi Lokesh,
Go through the following threads, you will surely be able to find something useful:
Advantages Of XI
SAP XI advantages
Advantages of SAP XI
What are the adavantages SAP XI for legacy customers
Scope and demand of XI
SAP XI over Business connector
XI vs BizTalk , WBI
functionality differences between XI and other middleware
Before XI?
Connectors and Xi...
Benefits Of XI
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=16263
If you still need more, try searching on SDN with keywords XI and Advantage. You will find lots of stuff (apart from the above links )
Bye
Ankur

Diffrence between core 2 due T and other like SP,P,SL

Hello
Can anyone clear me the difference between core2due processors come with T8400 to T9600 and other
P--,SP and SL
Thanks

welcome to the forum!
you may find the lenovo processor reference helpful.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

LR 3.2 - Local adjustment brush and heal/clone tool broken

Hi,
After installing LR 3.2, the first thing I noticed is that it is much slower than the previous version (using XP Pro + 3GB memory and a speedy processor).
But the most terrible novelty of this version is that the Adjustment Brush is going berserk after a while:
It first slows down to a crawl, so slow that it's almost impossible to work with.
While working with it after a while, it starts to show random rectangular areas that are copies of other areas of the image that have nothing to do with the area I'm working on. This happens after a brush stroke. The Undo command makes these rectangular "patches" disappear.
From time to time, the whole image is flipped upside down (You can't believe it? Neither could I).
Eventually, afte a brush stroke, the sandclock mouse cursor is displayed and the program freezes (at this time it can be using over 1 GB of memory although I'm working on a single, standard EOS 5D image). The only way to stop this madness is to kill the process.
The Heal/Clone tool also shows a similar misbehavior.
I didn't have these problems with the previous version.

Ian,
Ian Lyons wrote:
Are you looking for help? If so then it would really useful if you provided some information on hardware, OS and what exactly are you doing when the system freezes. Also worth noting that applications very rarely (even badly coded apps) cause the hardware to crash. System crashes are more often than not due to bad device drivers or bad hardware that an application may expose.
I'm a software professional since PCs exist. I have enough experience to identify software problems when they appear. At least, I'm able to determine whether I have a hardware problem or if the software I'm using (or writing) is buggy. I have read many reports, many threads, many advice about these performance issues. I'm pretty sure that the problem is LR. I repeat: I do not have any performance issue when editing images in Bibble 5, Photoshop or DxO Optics Pro. BB5 is at least an order of magnitude faster than LR when editing images.When I use the Adjustment Brush in Camera Raw, there's absolutely no problem. My hardware is powerful enough and my installation is pretty clean (could it be powerful enough in Camera Raw and not in LR?). My OS is very stable. I have not seen a BSOD since years and all my applications are running flawlessly on this system (which includes image editing applications, software development tools, and many others...).
Users having various and very powerful systems (PC or Mac) are reporting the very same problems. Like Bruce, I'm convinced that this is not a hardware resource problem. We didn't have these problems with LR2 and LR3 was supposed to enhance performances. Version after version, it has now become unusable for me.
Drawing the conclusion that since many users don't have any performance issues, the problem must be on the user's side would be erroneous. The bug is in LR and may or may not appear depending on the circumstances. Any developer knows that a bug may or may not hit a given user depending on how she uses the software. I admit that these bugs are hard to fix. But LR has to be fixed, no doubt.
I profoundly regret that Adobe do not acknowledge this.

Cursor for text and other editing tools is too light to see

I have a new Macbook Pro Retina display running Mavericks.
When I use editing tools (like text, shapes, etc.) in apps like adobe acrobat, fireworks, and photoshop the cursor is so light grey that I can barely see it on the screen.
Does anyone know how to change the color or contrast of the cursor? Is it even possible?
This is impacting my productivity by at least 10%. Don't tell my employer or I might get fired.

hello... anyone out there?
where else can I get help from these companies that don't provide customer support?

Which course is better for consolidation apects of BPC and other EPM tools

Hi All,
I am having the technical understanding of BPC as a tool, but I am not able to understand the consolidation part of it. I would like to gain an insight of the financial part of the BPC consolidation. Not only this, there are few other tools in EPM suite (like Intercompany reconciliation; Financial consolidation; Disclosure management; Financial information management) which requires relevant understanding of Financial accounting.
Can anyone please suggest, which Professional course would be better for the above tools; not just from the point of knowledge but also with regards to job prospects (as I have seen that company's now asking for consultants with background of CA/CPA/ICWA etc).
I had gone through the course structure of ICWAI, but not sure whether it will be of very help.
Please suggest.

Hi Sonti,
I understand your point, but as you might be knowing that in real world no one just decides by looking at the face that this guy is having good finanicial knowledege, so lets take him for the job. Moreover when it comes to client interaction, if the client is given two profiles - where one consulant writes only his experience and knowledge and the other one describes his/her added certification or post graduation in the concerned subject (in addition to the same level of experience and knowledge), then ofcourse the second one will be given the priority over the first.
So my view is that just by understanding the topics will never give you the cutting edge in the market, you additionally need some thing to make your profile an eye catcher and that too needs to be relevant with your area of work.
Thats where I am confused and hence posted the question.
Also many thanks for the book that you have suggested, that might be a good option for the time being.

Database used by Apex and other dev tools

Hi
As the applications here start to get more complex, I have noticed that much of the business logic in the database is getting more dependent on Apex-specific procedures and packages.
For instance, in many places we use v('APP_USER') to get the connected user, or rely on Apex authorisation schemes to control access etc. This happens - I think - because it is so easy to integrate the logic in the DB with the Apex environment and vice-versa (what would not be the case if other tool were used).
However, if we start using another tool to develop a new app that uses the same logic in the database, obviously much of the code will not work.
Anyone faced with this situation? Is it a bad practice to reference Apex-specific calls in the business logic? What have you done to circumvent this problem?
Thanks,
Luis

Hi,
APP_USER is indeed a "lightweight user", as you name it. The actual connection to the database runs on a technical user. You can change APEX authentication to use database credentials in order to have APP_USER mapped to existing database accounts, if that would help you, or use a custom authentication scheme that links to some SSO-solution, but the acting database user will always be the technical user.
I'm not sure what kind of JAVA user you mean, I assume you mean other technical users, e.g. users in a datasource of your J2EE application.
It wouldn't be too difficult to put the special case into your policy, like
IF USER = 'APEX_PUBLIC_USER' THEN
l_login_user=v('APP_USER');
ELSE
l_login_user=USER;
END IF;This should work easily if you use database authentication in APEX. Otherwhise, you may have to implement a more complex policy.
Hope this helps you setup your policy.
-Udo

Acrobat Pro and other CS4 tools won't run.

Suddenly I can't execute two CS4 tools. Acrobat Pro reports a CS4 licensing issue and requests that I exceute another product like PhotoShop. Both versions of PhotoShop report error 148:3.
Please advise/help.
Joe

Run the Creative Suite Cleaner Tool, reinstall.
Mylenium

Lasso and other selection tools

When I select an object and resize, or transform it, it makes the edges blurry, and not as sharp. I've been using this tool forever and it only started doing this. Can anyone help?

It happens when I work at 100% magnification, and at all magnifications. The feather value is set at zero. I'm working with photoshop Elements 12 on the Cintiq Companion. Wacom said it must be a photoshop problem. It just started happening out of the blue -- don't know why it's not working like it used to. Any other suggestions? thanks!

Difference between the design of clusters PCLx and others like RFBLG etc .

There are a few nagging questions which I was not able to find in the forum hence i have to post a new question.
I am a little confused about the difference between the different clusters .
If i start with RFBLG i.e. the cluster for BSEG BSEC etc ,I can see that the tables which are part of this cluster
can be viewed through different methods like
1) whr usd list for RFBLG
2) dd02l table and give the required parameters there
now when I compare this with another so-called cluster PCL1 if find that PCL1 is not recognized as a cluster
and also I am not able to see the same in dd02l table when i give PCL1 and the tabtype as cluster which I was able to see
for the RFBLG ,there are other tables similar to RFBLG .
1) SO what is the difference between the RFBLG type of clusters and the PCLx type of cluster
2) are pclx and rfblg..type of clusters same ?
3) why does PCL1 shows that it is a transparent table ? where as rfblg shows in a diff way in se11
4) i know we access data from PCL1 using import and export stmts ,DO OR CAN WE DO THE SAME FOR RFBLG
5) I found that each and evry cluster table had diff fields ,this was kinda surprising for me as I had been thinking
that all cluster tables need to follow a certain rule ,SO WHO DECIDES THE FIELDS OF A TABLE CLUSTER ?
6) PCL1 has the index button enabled ,which again I think is not according to the cluster table rules?how?
7) I understand that we can save data in form of internal tables in the PCL1 cluster ,can we do the same in RFBLG ?
8) Can I think on lines that PCL1 and RFBLG type of cluster are two totally different types of data dictionary objects
and the usage and implementation of both of them is different and that the design and the BASE of both of such objects
is different .
I know this is a long list but I am sure that answers to these questions would really require some one who has really really work hard and invested a lot of time in understanding the dictionary system.I am awaiting a few answers ,few hints and a healthy discussion till we get them .
Thanks ...
a

Hello,
1/
BSEG is a typical Cluster Table.
This means that the physical table BSEG does NOT exist in the database, physical data for BSEG is stored in the database (table) cluster RFBLG.
In ABAP however you can perform selects on BSEG (with all fields from the SAP repository structure, see SE11 on BSEG), during execution the SAP database layer will translate these statements to physical selects in the RFBLG database table, so in ABAP this is transparant.
More info :
[http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
2/
PCL1, PCL2, ... are normal SAP transparent tables, however in HR they are often called HR cluster table.
Transparent tables are SAP objects where there is also a database table with the same name that contains the physical data.
However the PCL tables are somewhat different from normal transparent tables (data is compressed, external programs can not interpret the data, ...).
This means that in ABAP you can not use simple SQL statements to access data in PCL tables (because of compressed format).
In stead statements like EXPORT TO DATABASE and IMPORT FROM DATABASE need to be used.
More info :
[http://fuller.mit.edu/hr/cluster_tables.html|http://fuller.mit.edu/hr/cluster_tables.html]
Wim

Brushes and other like tools

Similar Messages

Maybe you are looking for