Brushes panel causes graphics driver to fail to load

If I have the brushes panel open when I launch Photoshop openGL acceleration will fail to load, even with default brushes. Everything else the same, but with the brushes panel hidden it will load as normal.
My video card is a Nvidia 550 ti

I think maybe the subject of my thread is poorly worded. My graphics driver is fine in all cases. The only problem I'm having is that openGL acceleration, within Photoshop alone, fails to load if the brushes panel is visible when Photoshop starts up. I don't see how this could possibly be the fault of the driver. But what do I know?
I have zero other graphics driver issues whatsoever on my system and it befuddles me that Nvidia would be responsible for an edge-case issue that occurs within your software and your software alone.
It would be awesome if Adobe staff just thanked me for reporting the bug and looked into it rather than point a finger.

Similar Messages

Driver WUDFRd failed to load

Greetings Guys,
I have an issue on a client computer running windows 7 ultimate via bootcamp latest (5.0.5033): OS X 10.8.5.
Looking at the windows logs, I found that driver "WUDFRd" failed to load for peripheral ACPI.
The consequence of that driver not being loaded is the screen on windows black. When I plug the unit (MagSafe), I do have video.
When on windows for around 30 minutes with MagSafe connected, fan start to run high. I am assuming the driver not loaded (ACPI) is causing the issue.
I went to windows forum in search of a solution and they pointed to a potentially bad MLB. A bit drastic to my taste
I am pretty sure that the MLB on the MacBook Pro is OK.
I am wondering if anyone out there had the issue in the past and how to resolve it from an Apple perspective ?
Kind Regards,
zongo saiba

Hi Zuhl
Are you using a Logitech keyboard on that system?
The driver WUDFRd.sys is associated with Logitech keyboards and some of these are not compatible with Windows 7.
Check the following.
Go to the following website: Windows 7 Compatibility Center
You will see a Software and Hardware tab that you can use to locate the product you wish to check for compatibility.
Select the Compatibility FAQ that will explain how to use the compatibility website.
If you find an installed software/hardware item that does not appear on the compatibility list, go to the website of the maker of that product and check for any updates.
Let us know what you find.
Thank You for using Windows 7
Ronnie Vernon MVP

The driver WUDFRd failed to load...

I'm getting a warning in the event log upon startup. Windows 8.1 Pro.   This is a IdeaCenter B750 AIO.
I have no idea what driver this is so I need help fixing this error. What is WUDFRd ? All the information I can locate refers users to their OEM for a driver update.. Some mention a fingerprint reader but this system doesn't have one of those.
Thanks
Bryan
Log Name:      System
Source:        Microsoft-Windows-Kernel-PnP
Date:          2/10/2015 11:24:03 AM
Event ID:      219
Task Category: (212)
Level:         Warning
Keywords:
User:          MYPC
Description:
The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0004.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
    <EventID>219</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>212</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2015-02-10T16:24:03.240396600Z" />
    <EventRecordID>22787</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="224" />
    <Channel>System</Channel>
    <Computer>MYPC</Computer>
    <Security UserID="USERSID>
</System>
<EventData>
    <Data Name="DriverNameLength">16</Data>
    <Data Name="DriverName">ROOT\SYSTEM\0004</Data>
    <Data Name="Status">3221226341</Data>
    <Data Name="FailureNameLength">14</Data>
    <Data Name="FailureName">\Driver\WUDFRd</Data>
    <Data Name="Version">0</Data>
</EventData>
</Event>

Apparently I've received a "private message" here about this topic but can't locate how to get to that message,,

E72 - The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001

I have a problem with my ThinkCentre E72 (Windows 8).
Suddenly, it shuts down with "shut-down" screen. Later, in my Event Viewer, I found the following System Warning:
"The driver \Driver\WUDFRd failed to load for the device ROOT\SYSTEM\0001" where the source of problem is Kernel-PnP.
Only thing that is plugged in my computer is mouse, keyboard and monitor.
Many thanks,
Matija

Hi,
PNP0A0A is not a default pnp ID, you need go to the manufacturer websites to find the ACPI driver, download and install it.
Alex Zhao
TechNet Community Support

CS5.0.2 causing graphics driver crash

Updated to Premiere 5.0.2 and Media Encoder 5.0.1 - when I export (inside Premiere as well as sending to Media Encoder, Premiere/Media Encoder freezes up and I get a Windows message to say that the Graphics driver has crashed and it has successfully recovered. Reverted back to Premiere 5.0.1 and can successfully export without issues. Anyone experiencing similar problems? I have latest WHQL release Nvidia driver which has not given any hassles.

Does your error message look like this?
http://dl.dropbox.com/u/1426292/share/PPRO_5.02_GPU_Crash_01.JPG
I have the same graphics card (GTS 250) and I have had some problem as well.
Here is a thread that I started when I found issue related to the GPU and large image files: http://forums.adobe.com/thread/673072?tstart=0
Here is another thread that I have been contributing to...the person that started the thread has the same graphic card as well: http://forums.adobe.com/message/3102758
I had mixed results from the update to 5.02, but the cons out weigh the pros when the hack is considered. So, I have since decided to wait until I can afford a supported card...hoping that will help. Below is what I posted on the last forum that I provided the link to. It illustrates my results with the update and different drivers. I would love to figure out how to make the GTS 250 reliable, please post any new findings that might be helpful. Thank you.
Quote:
I have found problems with the Nvidia driver 258.? on my machine. While I did gain some marginal ability to work with larger images using the GPU, I started to get frequent OpenGL error messages and crashing in After Effects with the updated driver, so I have reverted back to version 197.? and all seems to be well again.
It makes me worry using the "hack" on video jobs. The hack is fun to play with to see how well the playback can be using the GPU, but I don't want to work on time sensitive material always wondering if something I add to the timeline will cause it to crash, or worse, corrupt a project file. For me, I don't think the benefits out weigh the downside of the "hack".
I have considered using the "hack" on video only projects, but I don't know if the problems will eventually turn up on long projects or not. Most of my most recent projects have been fairly short. I do realize that my large images that have causing the crashes are huge (approx. 4300 x 2800), but in software only mode they are not a problem at all...really smooth. If I had more time, I would fine the maximum image size that I could work with without causing my system to crash, but I don't have that much time to play with it. It seems that the smaller the image, the longer it takes to make it crash, but eventually, I can always make it crash. So, I wonder if any image size could be a problem, but it just takes longer for the crash to occur?
I really wish that someone with a supported card would try some large images and run it through some testing. Once I get a supported card, my large images will be my first test. If it crashes with a supported card, I'm not going to be real happy. Some have suggested the problem may be the amount of RAM on my GTS 250, but my card has 1GB, which is about how much many of the supported cards have.
I am wondering if the GTS 250 just doesn't have enough muscle to work with the images? Anyone with a supported card want to give it a go? The time would be greatly appreciated.

ITunes causes DVD drive to fail in Toshiba Satellite laptops

This seemed unlikely to me and I was wondering if anyone had any similar experiences and/or suggestions.
This morning I discovered that the DVD drive on my Toshiba Satellite laptop wasn't working - Device manager said it Failed to Start (code 10). I called Toshiba and they asked what was the last thing I'd done on the PC. When I said, "Updating iTunes," they said that was the problem, due to an interaction between iTunes and Toshiba Satellite laptops.
Sure enough, uninstalling iTunes fixed the DVD drive.
So now I have to install / uninstall iTunes every time I want to update my iPod

Another thing to check on is a device filter conflict:
iTunes for Windows Vista: Troubleshooting CD issues caused by device filters
(One of the applications I' seen conflict in this way with iTunes on a Vista system is HP memories Disc Creator Software, which comes bundled with some HP digital cameras.)
... however, if you're still getting no CD/DVD drive with just the iTunes filters in place, you may be one of the unlucky ones who are getting the issue discussed here:
Optical drives not recognized in Windows Vista after installing iTunes 7
Although it wouldn't necessarily be a short-term thing, keep an eye on that document for updated information about the issue.
In the short term, one workaround might be to use a different application to rip the CDs, and then use the "Add to library" function to get the ripped files into your iTunes. (That way you wouldn't have to continually uninstall/install iTunes.) The following document might be of some help with that:
iTunes: About the Add to Library, Import, and Convert functions
EDIT: sorry Jason, didn't notice you'd already replied here. Didn't mean to butt in.

Intel High Definition (HD) Graphics Driver update failed - (2015 version!)

I'm very disturbed that the issue I am having with my brand new HP Envy laptop is one that has been the subject of ongoing discussions in the HP forums. Why hasn't this been figured out and resolved? Why isn't HP chiming in instead of letting forum participants come up with all sorts of "fixes" (and I use the term loosely based on subsequentresponses).
HP - I would expect it's time for you to provide a fix for this ongoing issue. I anxiously await your reply.
BTW: the detachable keyboard I got out of the box is intermittently working - for that at least I am getting repair from HP, but this has been a disappointing purchase for me especially since my ancient desktop pavilion continues to hum along beautifully. Wish I cold have converted it for travel needs, but here I am, in the forums, discussing problems from a brand new purchase. Not good HP!!!!

I have just sent you a private message. If you are not sure how to check your forum messages, this post
has instructions.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Event ID 219 - driver fails to load

I have the following error each time I restart my Dell Optiplex 780, Win 7 Ultimate 64-bit. Event ID 219
The driver\Driver\WUPDFR failed to load for the device WpdBusEnumRoot\UMB\2&37c186b8&STORAGE#VOLUME#_??_USBSTORE#DISK&VEN_DELL&PROD_USB_MASS_STORAGE&REV_200#7&3B0D4174&08&HW6y6Q1&0#.
The bold and underlined portion of this long string is the Service Tag # of my Dell V313w Printer. I have completely removed the software, using the Control Panel/Applications and Features/Uninstall. I then downloaded the latest printer package from Dell for
Win7 64-bit for my product. I installed it and I still get the same error(s), each time I restart my PC.
Any thoughts, suggestions or solutions to this perplexing problem? BTW - everything seems to work just fine, but my event log is getting clogged with this persistant error.
Sincerely,
Doug Shreve

Doug
Can we get your event viewer logs?
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here (if you can) to skydrive or a file sharing service
Wanikiya & Dyami -Team-ZigZag. www.ZigZag3143.com email [email protected]

Satellite A200 - WebCam issue - webcam drives has failed

Hi,
I need some help regarding the integrated webcam of my Satellite A200.
Everytime I start the laptop I keep receiving a message saying that the webcam drives has failed and I have to restart the computer, but the problem persists.
I have downloaded an updated webcam driver, but nothing.
Can anyone give me an idea of what is going on?
Thanks!

Ok - I've had the same problem:
"Everytime I start the laptop I keep receiving a message saying that the webcam driver has failed to load and I have to restart the computer"
Same when trying to update driver from Toshiba site, same when rolled back / uninstalled drivers, then re-installed default drivers. Nothing worked.
Sorry - but the solution that worked for me wasn't easy.
I had to disassemble the laptop to take a look - fix something else ( wireless on/off switch had broken / jammed in off position - lugs had snapped on back of the slider switch on the case, but no problems, I just left it in "on" position, as wireless can be switched off in software anyway). I decided as I'd got that far already, to pull the laptop completely apart and clean it out properly.
There's a shielded cable running from the webcam in the lid, though to a small white socket on the motherboard, accessible under the keyboard, next to the wireless board.
I was disconnecting various other cables etc, and came across this one disconnected, and couldn't remember disconnecting it myself. Hmmmm...
Anyway, I connected it back up on reassembly, it pushes in to the socket and seems seated, but needs an extra little push to "snap" securely in place.
My guess is that some of these haven't been seated properly ex-factory. They probably work just fine, until perhaps through repeated flex on the back of the keyboard when typing, or opening and closing the lid, the connector falls out of the socket.
Anyway - my webcam works again now. (using Vista SPII and all current updates, but in my case that's not relevant, as it was NOT a software or driver issue).
There's instructions (with pictures) for disassembling the A200 on the net - use google to find them. You don't need to pull it completely apart, just to the point where you can get the keyboard out, then you can access the connector.

Error message "failed to load Tosrfcom" on Satellite Pro U200

hi
I have Toshiba Satellite PRO U200 notebook with pre-installed VISTA Business
after restart, even for the first time, have the following error in Event Log:
Log Name: System
Source: Service Control Manager
Date: 07.07.2007 01:29:15
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: toshiba
Description:
The following boot-start or system-start driver(s) failed to load:
Tosrfcom
under:
http://www.eventid.net/
cannot find any solution !
knows someone howto solve this problem ?

Hi
After a long investigation I found out that the Tosrfcom service is a part of the Toshiba Bluetooth. It must be a Bluetooth RFCOMM driver.
The driver was installed in the registry under this entry:
HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ Tosrfcom
I dont see many solution ways
Try to remove the BT stack and download the newest one from the Toshiba Bluetooth center.

Failed to load configuration: ApplicationSSOTokenProvider.getApplicationSSO

Hi,
I'm trying to configure an openSSO setup that involves two GlassFish domains
domain1 - Acts as my openSSO server
domain2 - holds the policy agent and the protected web application
I'm using the following versions:
GlassFish - Sun GlassFish Enterprise Server v2.1 (9.1.1) (build b60e-fcs)
OpenSSO - OpenSSO Express Build 8 - http://download.java.net/general/opensso/stable/opensso-build8/opensso_express_20090901.zip
Policy Agent - J2EE Agent 3.0 - http://download.java.net/general/opensso/nightly/latest/j2eeagents/appserver_v9_agent_3.zip
I've installed/configured GlassFish domains, openSSO and Policy agent as per the instructions on the following pages:
http://wikis.sun.com/display/OpenSSO/b5agentinstallinstruction
Similar steps are mentioned at - http://blogs.sun.com/vijayanand/entry/opensso_and_agent_installation_in
I'm not getting any errors or problems installing or configuring any of the servers:
Application Server Config Directory :
/opt/sun/SUNWappserver/domains/domain2/config
Application Server Instance name : server
OpenSSO server URL : http://abhidllx.abhidomain.com:8080/opensso
Agent URL : http://abhidllx.abhidomain.com:10080/agentapp
Agent Profile name : myagent1
Agent Profile Password file name :
/opt/sun/SUNWappserver/domains/agent-password
But when I try to access the housekeeping app - agentapp.war i.e.
I get the following error:
HTTP Status 500 -
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: PWC1243: Filter execution threw an exception
root cause
java.lang.ExceptionInInitializerError
root cause
java.lang.RuntimeException: Failed to load configuration: ApplicationSSOTokenProvider.getApplicationSSOToken(): Unable to get Application SSO Token
note The full stack traces of the exception and its root causes are available in the Sun GlassFish Enterprise Server v2.1 logs.-----
When I retry or press reload I get a different error message:
HTTP Status 500 -
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: PWC1243: Filter execution threw an exception
root cause
java.lang.NoClassDefFoundError: Could not initialize class com.sun.identity.agents.filter.AmFilterManager
note The full stack traces of the exception and its root causes are available in the Sun GlassFish Enterprise Server v2.1 logs.-----
Now I don't know if I'm doing anything wrong coz I've tried it out over 10 times and I continue getting the same errors.
I googled a lot and managed to find this link - http://wikis.sun.com/display/OpenSSO/Troubleshooting+Java+Enterprise+Edition+%28Java+EE%29+Policy+Agents#TroubleshootingJavaEnterpriseEdition%28JavaEE%29PolicyAgents-AgentthrowsClassNotFoundExceptionexceptionwhenaccessingagentappapplication
I did what it says but I'm still getting the error.
I'm sharing few log files:
Anybody who can help?
thanks in advance.

contd...
amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Naming table -> {iplanet-am-platform-site-id-list=01, iplanet-am-naming-policy-url=%protocol://%host:%port%uri/policyservice, iplanet-am-naming-session-class=com.iplanet.dpro.session.service.SessionRequestHandler, iplanet-am-naming-session-url=%protocol://%host:%port%uri/sessionservice, iplanet-am-naming-securitytokenmanager-url=%protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF, iplanet-am-naming-samlawareservlet-url=%protocol://%host:%port%uri/SAMLAwareServlet, serviceObjectClasses=iplanet-am-naming-service, iplanet-am-naming-auth-url=%protocol://%host:%port%uri/authservice, iplanet-am-naming-profile-class=com.iplanet.dpro.profile.agent.ProfileService, iplanet-am-naming-samlassertionmanager-url=%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF, 01=http://localhost:8080/opensso, iplanet-am-naming-policy-class=com.sun.identity.policy.remote.PolicyRequestHandler, iplanet-am-naming-jaxrpc-url=%protocol://%host:%port%uri/jaxrpc/, iplanet-am-naming-logging-class=com.sun.identity.log.service.LogService, iplanet-am-naming-profile-url=%protocol://%host:%port%uri/profileservice, sun-naming-idsvcs-jaxws-url=%protocol://%host:%port%uri/identityservices/, iplanet-am-naming-samlsoapreceiver-url=%protocol://%host:%port%uri/SAMLSOAPReceiver, sun-naming-idsvcs-rest-url=%protocol://%host:%port%uri/identity/, iplanet-am-platform-lb-cookie-value-list=01|01, iplanet-am-naming-logging-url=%protocol://%host:%port%uri/loggingservice, iplanet-am-naming-fsassertionmanager-url=%protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF, iplanet-am-platform-server-list=http://localhost:8080/opensso, iplanet-am-naming-samlpostservlet-url=%protocol://%host:%port%uri/SAMLPOSTProfileServlet, sun-naming-sts-mex-url=%protocol://%host:%port%uri/sts/mex, sun-naming-sts-url=%protocol://%host:%port%uri/sts, iplanet-am-naming-auth-class=com.sun.identity.authentication.server.AuthXMLHandler}
amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, 01=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, 01|01=iplanet-am-platform-lb-cookie-value-list, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, http://localhost:8080/opensso=01}
amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Site Id Table -> {01=01}
amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Platform Servers -> [http://localhost:8080/opensso]
amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Platform Server IDs -> [01]
amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
ERROR: WebtopNaming.getServerId():serverId null for server: http://abhidllx.abhidomain.com:8080/opensso
amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
ERROR: WebtopNaming.getServerId()
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server ID.
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:673)
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:594)
     at com.iplanet.services.naming.WebtopNaming$SiteMonitor.<clinit>(WebtopNaming.java:1384)
     at com.iplanet.services.naming.WebtopNaming.startSiteMonitor(WebtopNaming.java:1291)
     at com.iplanet.services.naming.WebtopNaming.initializeNamingService(WebtopNaming.java:247)
     at com.iplanet.services.naming.WebtopNaming.updateNamingTable(WebtopNaming.java:1067)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
SiteMonitor initialization failed :
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server ID.
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:681)
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:594)
     at com.iplanet.services.naming.WebtopNaming$SiteMonitor.<clinit>(WebtopNaming.java:1384)
     at com.iplanet.services.naming.WebtopNaming.startSiteMonitor(WebtopNaming.java:1291)
     at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
amNaming:10/29/2009 12:45:15:557 AM IST: Thread[SystemTimer,10,Grizzly]
URLChecker.checkSocketConnection() returning true
amNaming:10/29/2009 12:45:15:572 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
ERROR: WebtopNaming.getServerId():serverId null for server: http://abhidllx.abhidomain.com:8080/opensso
amNaming:10/29/2009 12:45:15:572 AM IST: Thread[SystemTimer,10,Grizzly]
URLChecker.check() : Http connection took 10 ms
amNaming:10/29/2009 12:45:15:572 AM IST: Thread[SystemTimer,10,Grizzly]
URLChecker.check() : setting status to AVAILABLE for http://abhidllx.abhidomain.com:8080/opensso/namingservice
amNaming:10/29/2009 12:45:15:601 AM IST: Thread[SystemTimer,10,Grizzly]Edited by: don_mahantya on Oct 29, 2009 10:19 PM

Call Library Function Node: library not found or failed to load

Hello,
I had a VI that could not find some of the dll functions it needed. It works on one machine and not on another. So foolishly I copied the dll in question from the working machine and pasted it over the one on the non-working machine.
Now all my math functions are broken on the machine I copied the dll too. The error is "Call Library Function Node: library not found or failed to load"
And if I try to relink in the VI I get "Error loading C:\National Instruments\LabVIEW 8.2\resource\lvanlys.dll" A dynamic link library (DLL) initialization routine failed."
I tried a repair labview and that did not help.
I tried uninstall and reinstall labview and that did not help!
Please help me fix this!
Version 8.2
dll: C:\National Instruments\LabVIEW 8.2\resource\lvanlys.dll
Jim

What library did you first copy?
Also lvanlys.dll depends on the Intel Math Kernel Library that gets installed in a different location "C:\Program Files\National Instruments\Shared\MKL".
This Intel Math Kernel Library again depends on the Visual C runtime libraries. Most likely you replaced one of those runtime libraries somehow and now the Math Kernel Library (MKL) fails to initialize which causes thelvanlys.dll to fail its load.
Without a good view on your system and what other NI software you have installed it is very hard to recommend a good way of proceeding. There are various versions of the MKL used by various versions of NI products and just deleting the entire MKL folder might get you into trouble with other NI tools.
Deinstalling everything from NI, deleting the entire National Instruments folder and then reinstalling what you need would be the most safe proceeding.
And next time don't just copy some Visual C runtime libraries between machines. Their dependencies are complicated at the least and simply not graspable by us mere mortals. Use the according C runtime installer for the version you need as that installer will take care of installing the right versions of C runtime components and registering everything proberly so you do not usually run into problems with other applications using different versions of the C runtime.
Message Edited by rolfk on 03-01-2010 10:26 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Command+V = Failed to load extension?

Ok so here's what I get after command+V:
Failed to load extension com.apple.driver.applemacriscAGP
Failed to load extension com.apple.driver.applemacriscPCI
Couldn't alloc class AGP
Then it keeps repeating:
Still waiting for root device
Does anyone know what to do? If I just let it boot up normally (without hitting Command+V) I can't get past the initial Gray screen with the Apple on it. I have tried many things to no avail. I have reloaded the OS many times.
Thanks for your help.

Hi! Have you booted from the install disc and tried repairing the drive? If you've re-installed to no avail then have you run a hardware test? Tom

Intel 3000 Graphics driver from windows update failing to install. Error 800F0244

Hi all, So an update has come through windows update for my embedded graphics which is an Intel HD 3000. Problem is the update keeps failing. Tried restarting and nothing changed. I ended up jumping on to the Windows Forums and seems like this problem has just started to pop up for quite alot of users and no solution yet. This is what the windows website says for the Error : SPAPI_E_SIGNATURE_OSATTRIBUTE_MISMATCH0x800F0244 The software was tested for compliance with Windows Logo requirements on a different version of Windows, and may not be compatible with this version. So was wondering if anyone else had this problem and if anyone found a solution?

Hi Everyone , So after a few minutes of digging around this is what I found. This is the driver version that is failing for intel HD 3000. ( 9.17.10.4229 ) So I thought I'd check the driver on the Intel site, to see if it was the latest, which it was .. (9.17.10.4229) And this is the driver currently installed for my HD 3000... and as noted its ( 9.17.10.4229 ) SO its seems this problm is a windows update issue and the most current driver is available through intels website. No need to stress, jump onto the intel downloads page and download the latest one if you havent already, This is a link to the 32Bit Driver https://downloadcenter.intel.com/download/24970/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-32bit Heres the link for the 64Bit https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit As for the windows update one, hide that update as clearly something isnt right and surely MS will patch it soon enough! Hoped this helped

Power Map causes Intel HD Graphics Driver to crash or Blue Screen (BAD_POOL_HEADER)

Hello,
I have a user who is attempting to use Excel 2013's Power Map Add-in, however, he had this to say:
"I can regionally map counties without an issue, but the Zip Code mapping is
always giving me problems. It may be because there are so many zips in the
state."
He is using a Lenovo 440p laptop with Windows 7 Professional x64 and I have already updated his Intel HD graphics driver using the official driver tool from Intel, has well
as Lenovo's driver update software. Also, here are some screenshots below. Are there plans for a hotfix or can someone advise on a solution? Thank you.

same problem here, easily shows column, bubble or heat map but crashes every time when I choose region map. Trying to draw 64 countries and one single value column on a world map. any solutions?

Brushes panel causes graphics driver to fail to load

Similar Messages

Maybe you are looking for