BSD file type problem install

Using my Cube's internal DVD I am trying to install Tiger 10.4 (full install disc) on to an external 80G HDD connected to the Cube by firewire.
The disc check finished and the install starts, but instead of a successful install I get a report of an "error" and asked to restart.  Upon restart I first run Disc Utilities to verify the HDD and get --
Invalid BSD file type
Volume Bit Map needs minor repair
The Volume Cube-1a (HDD name) needs to be repaired.
-- all these on a brand new, just partioned & checked, HDD
What is happening here - Faulty install disc ? Faulty HDD ? Faulty computer ?

I'm thinking jumper settings. Here is an article on upgrading a Cube hard drive:
http://cubeowner.com/kbase_2/index.php?page=index_v2&id=132&c=5
Note it says "cable select" is not appropriate for Cubes, and that most new ATA drives ship preset to cable select.
That entire site is devoted to the Cube. Probably some good stuff there!
AJ

Similar Messages

  • CS1 and CS2 InDesign file type problems and Tiger

    Dual 2.7GHrz G5, 2GB RAM, OSX 10.4.5
    Previously, InDesign 3 (CS1 version) was installed on this Mac. I needed to install the full CS2 package. Everything installed just fine. The problem I am having is the file type associations. The Mac now sees CS1 InDesign files as Indesign CS2 files. I got info on a file I knew to have been created and saved in InDesign CS1. I changed the "open with:" to InDesign CS and it worked until I hit "Change all". It then reverts back to a CS2 file type. On other sites I found some different things to try like rebuilding or deleting the LaunchServices pref files, checking to see if their was a CFBundleIdentifier, etc. Anyway, what I seem to have found is that Tiger gets confused when the Type and Creator are the same in the info.plist files. Panther, however, does not seem to have this same problem. We have 10+ other G5's of similar hardware specs as the one listed above, running Panther 10.3.9, have CS1 and CS2 installed, and we are not having the same file type problems.
    As a test, I modified the CFBundleIdentifier to be different than the one found in the CS1 info.plist, and it let me "change all" the CS1 files to CS1. Of course, CS2 files could not be associated with CS2 now.
    Is there a fix for this? Or, is there a patch being worked on that will fix this problem? We really need to keep both versions of the software installed, and I don't want to have to rely on users making the decision about what version they are working in.
    Tom

    If Get Info shows both app versions (& it should) as "Open with:" choices, you can at least still set individual docs to open with the preferred version. Instead of having to open Get Info windows, you can do the same thing a bit more easily with the contextual menu that pops up when you right (or CMD) click & hold on a Finder document icon.
    Normally, the "Open with >" choice in this menu is a one time thing, but if you hold down the option key, it changes to "Always Open With >" & makes the new app choice permanent as it opens the doc, all in one step.

  • CS3: PNG File Type Problems

    I can import PNG files without a problem, but when i drag one
    onto the
    stage, it is always a very small size and not the size it
    should be. JPG
    and GIF, etc don't do this. If I drag one onto the stage from
    the library,
    they are the size they should be, but not so with PNG files.
    I can change
    the size in the property inspector just fine and the image
    will appear as
    crisp and clear as it should. But why is this happening?
    Thanks
    Aziz Peregrino-Brimah
    Bezworks Design
    www.bezworks.com

    The files being imported into Flash are files that I first
    exported out of
    Photoshop. If I export a jpeg file from photoshop and into
    Flash, there is
    no problem, but then I don't have any transparency.
    Aziz Peregrino-Brimah
    Bezworks Design
    www.bezworks.com
    "Aziz" <[email protected]> wrote in
    message
    news:f5jiam$sui$[email protected]..
    >I can import PNG files without a problem, but when i drag
    one onto the
    >stage, it is always a very small size and not the size it
    should be. JPG
    >and GIF, etc don't do this. If I drag one onto the stage
    from the library,
    >they are the size they should be, but not so with PNG
    files. I can change
    >the size in the property inspector just fine and the
    image will appear as
    >crisp and clear as it should. But why is this happening?
    >
    > Thanks
    >
    > --
    >
    > Aziz Peregrino-Brimah
    > Bezworks Design
    > www.bezworks.com
    >
    >
    >

  • File type problem with email attachments

    Hi,
    I'm using SO_DOCUMENT_SEND_API1 to send email with an attachment. This attachment is a random file uploaded by the user on an ITS web site and sent to my FM.
    It is all working fine as long as I tell SO_DOCUMENT_SEND_API1 that the doc_type is 'PDF'. When I say it's 'JPG' I get an error "Message cannot be processed as it cannot be converted".
    It's not the actual file that is the problem, I can send jpg-images or any other file as long as I say t_packing_list-doc_type   =  'PDF'. However this leads to the attached file being called *.PDF instead of *.JPG, and the receiver has to rename it.
    The relevant code is
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
    where
    - ld_format is the file extension (e.g. 'jpg', 'pdf', ...)
    - ld_attdescription = ' ' (1 space)
    - ld_attfilename is the file name without extension (e.g. 'image001')
    My FM has to work with any file extension. It receives the file name and the file extension (jpg, pdf, doc, whatever) as an input parameter along with the file, and I just need to be able to email this file with the originale file name and extension no matter what that extension is. Any suggestions? Tia.

    hi Filip Camerman,
    i am giving you the sample code try this as such.
    it_packing_list-transf_bin = 'X'.
    it_packing_list-head_start = 1.
    it_packing_list-head_num = 1.
    it_packing_list-body_start = 1.
    it_packing_list-doc_type = 'PDF'.
    it_packing_list-body_num = tab_lines.
    it_packing_list-doc_size = tab_lines * 255.
    APPEND it_packing_list.
    Regards,
    Balaji E.

  • DNG/RAW file type problem

    I routinely download and convert my files to dng.
    The Metadata Browser correctly identifies these as Digital Negative (DNG) - at least for files downloaded by LR 1.0 and LR 1.2. However, files downloaded by LR 1.1 seem to be identified as Raw even though the file extension remains .dng.
    Can someone please tell me how change Raw back to DNG?

    First, save all metatdata to the DNG files (Ctrl+S).
    Second, remove the images from the Lr catalog. Do not delete from disk, just remove from the catalog.
    Third, import the DNG files. Set Develop Settings and Metadata to None in the import dialog.

  • File Type Problem

    I'm new to compressor.
    I sent a FCP file to compressor and it appeared as a job.
    I then chose a setting which was H264 from the QT drop down in settings.
    My Destination I chose as my desktop.
    The encoding seemed to take a long time.
    However my file appears as a .compressor file and can only be opened by compressor.
    What happened to my QT H264 file?
    What did I do wrong?
    Thanks for any help!
    Steve.

    I am not sure if you are running into a variation of this bug, but try changing extension to .mov and also use the technique described to set "Open With" properties.
    If that does not help, if you have some more details on the set-up, computer, OS, version of FCP etc. it may help

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Bridge 6 will not open common file types - e.g., jpeg, but CS6 has no problem with them

    I had had CS5.1 and CS6 on this PC. I uninstalled CS5.1; now, I can open common file types (eg.g, *.jpf, *.bmp) directly from CS6. However, Bridge 6 triggers an error message to the effect that "Windows cannot find (....\CS5.1) - in other words, Windows still wants to associate file types in Bridge *^* to CS 5.1 - not to CS6. As a result, bridge is effectively dead in the water.

    Yet another case of what happens when you uninstall an old version with a newer one present.
    The old version takes a lot of registry items with it on the way out, leaving empty pointers to itself rather than the new version still present. It's as if the old version uninstaller can't imagine the possibility of anything newer, so it just says to the OS "Photoshop is no longer installed". It's not just file associations, Lightroom users have reported similar problems with "Edit in Photoshop".
    Sometimes these pointers can be easily re-established, but more often a full uninstall/reinstall is needed, maybe with a run of the CC cleaner tool tossed in for good measure.
    This happens all the time, posts like this trickle through the forum at a steady state. I can't imagine why this has never been acknowledged, and why Adobe officials keep saying that it's perfectly safe to uninstall previous versions. It's not. Yes, it could well be that the bug, or whatever you prefer to call it, is ultimately in the Windows registry. But this happens with such solid regularity that some official recognition would be in order.
    The safe procedure is to always uninstall in strict reverse version order, then reinstall.

  • After installing Acrobat/Reader on Windows 7 or Vista, icons of all applications/file-types change t

    After installing Acrobat/Reader on Windows 7 or Vista, icons of all applications/file-types change to Acrobat/Reader icon and double clicking on any icon/file launches Acrobat/Reader (instead of the native application associated to the file type). Is there an easy fix for this problem?

    I'm sorry, but I wasn't aware of a native PDF viewer for Windows.
    Nonetheless, if you want to change your default PDF application in Windows, you need to right click on any .PDF file, select "Properties",
    then "Change",
    then select the program you want to open a PDF with.

  • File type/quicktime/streaming problem

    I use a stock trading app (thinkorswim) that links to a CNBC streaming video. Before I upgraded to Snow Leopard, when I'd click the link, VLC (a third party video app) would open and start streaming the video. Now when I click it, I get an error message saying "QuickTime Player must be installed to run this application."
    I think this is a file type issue. If the video was a static file, I'd do a Get Info on it and tell it to open in VLC. But it's a streaming video triggered from another app, so I don't know how to make it work.
    Any suggestions?

    I have the same problem. Was using Flip4MAC and have also tried Flip4MAC Beta which is supposed to work on Snow Leopard.... No Soap. If you have any responses from other places, I'd like to know.

  • Lose txt file type registration on un-install

    Hi,
    I un-installed DreamWeaver CS3 from one computer (evaluation
    installation), and now my file type "TXT" is no longer registered
    in Windows Explorer / Folder Options / File Types. I've tried to
    add back the registration from there, but it does not stay.
    Double-clicking on a TXT file still opens notepad, however. The
    real problem caused by this is that "Text Document" no longer shows
    in the document type cascade list up when I righ-click in a folder
    and hilight pop-up item "New". I would like this back - any
    suggestions?
    Also - any idea why DreamWeaver CS3 too approximately 1/2
    hour to un-install??? The un-install finished successfully with no
    error messages.
    Thanks.

    I'm experiencing problems too - (XP Home). The un-install too
    1/2 hour and worse I can't get my old Dreamweaver 8 to
    re-install/repair (it keeps requesting me to insert "Disk 1" - i'm
    reinstalling from a CD ) - the reason i want to reinstall it is
    that now I can't run my Cold Fusion files - i suspect the data
    connections might be hosed ...
    any suggestions on how to at least get my dreamweaver 8
    repaired ? I'd like to do that before wasting a lot of time looking
    for other problems
    thanks for any help

  • Just installed CS6 but can't associate file type JPG with Photoshop.

    I've just now installed Photoshop CS6 and Lightroom 4. File types PSD and TIFF work fine, but I'm completely unable to associate JPG, JPEG or any other variant with the Photoshop program such that I can double-click on the photo file and open Photoshop and the photo. I can associate JPG with either Bridge or Lightroom, or several other programs, but when I browse to Photoshop and select Photoshop.exe nothing happens, not even an error message. Does anyone have a clue what's going on here?
    Operating system is Windows 7 Ultimate Edition, 32-bit. There is 4GB of memory in the machine, which is a Dell Vostro 1720 laptop.
    Thanks,
    Bill Sexauer

    I know there is a problem with the file associations and that I need to fix them. What I don't know is how to do it. I successfully fixed the associations for file types PSD and TIFF, but I'm completely unable to do the same for type JPG. I did use Open With and that's where it just refused to allow me to change to Photoshop. It would allow me to change from the default Windows Photo Viewer to Bridge or to Lightroom, but not to Photoshop.
    The problem was probably caused by my having installed CS6 prior to uninstalling CS4. Should I just reinstall CS6 right over the top of the existing CS6?

  • Cannot install application, because it is ''not supported file type"

    hi, i cannot install an application from emule. The message is the the Adobe Reader could not open "insallpro.exe" because it is not a supported file type.
    Do anyone know how to resolve this problem?
    ibookg4   Mac OS X (10.4.5)  

    hi, i cannot install an application from emule. The
    message is the the Adobe Reader could not open
    "insallpro.exe" because it is not a supported file
    type.
    A .exe file is a windows executable file and will not run on a Mac unless you have virtual PC installed.

  • Problem with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?

    Hello,
    my problem is with importing saved .json backup file in fresh installed firefox 3.6.8? Message "unable to process the backup file", when i choosed option "Restore" from menu "organize your bookmarks" !?
    Normally that i followed all instructions from your support site, and that i tried many things, but nothing helped :( !?
    my .json file isn't corrupted cause it was saved on another partition before formatting my OS.
    Please don't tell me that my bookmarks are lost :( cause i had many important things in that bookmarks, on 100.s pages :( ....
    Thanks in advance!
    Sincerely,
    hoho33

    "
    Can you restore that JSON backup in a new profile?
    Did you make sure that it is really a JSON backup and that there is no missing or hidden other file extension?
    A JSON backup starts with: {"title":"","id":1,"dateAdded"
    A HTML backup starts with: <!DOCTYPE NETSCAPE-Bookmark-file-1>
    You can try if you can restore that JSON backup in a new profile.
    Create a new profile as a test to check if your current profile is causing the problems
    See Basic Troubleshooting: Make a new profile
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    Please for administration of this support site, make possibility to quote someone's answer, on this way is dificult to answer somebody who wrote some suggestion!
    No, i can't restore JSON backup in new profile, even on fresh installed OS XP SP3, with fresh installation of latest version of firefox!
    MAN I TOLD YOU 10X IT'S 200 % JSON BACKUP FILE!!! I'M NOT IN IT FROM YESTERDAY, I WORK IN IT 12 YEARS!!!
    I tried restoring json backup in new profile, but nothing, i couldn't restore, cause that stupid error from screen shot which i posted again appears !
    Man i'm not totally noob i repeat 2nd time here, and normally that i know to create new profile, and that i tried that, but that didn't help!
    I can't believe that FIREFOX has not good support team, and doesn't care for yours users, this will not give me more reason to use in future firefox
    like borwser, if i don't have good support, and when i have problem like this, to loose all my very important bookmarks and passwords on them, and
    firefox support won't to help me to solve my problem!
    If somebody from firefox support team read this, i can give you Remote desktop access to my computer to try solve this problem, like other serious company
    like HP, Dell , etc. give remote desktop support to their users!
    Corel are you from firefox support team? Please don't write same suggestions, cause i know to read, and i understand well if you write once some suggestion!
    Greetzz

  • Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

    Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

    Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

Maybe you are looking for