BSD name for volume is not correct

Hoping someone can answer this one
I have recently had a HD crash, and purchased a new drive which I installed Tiger on over USB. I have now put the new drive into my Macbook, but booting briefly shows the ? Folder and takes longer and I notice that the BSD name for the drive is disk0s2. (everything seems to run fine otherwise). I assume (and seem to recall from my old installation) that it would normally be disk0s1? putting two and two together i figure this is what is causing the slight boot issue. Can anyone advise me as to whether this should be changed and how? I have set the startup disk numerous times and seem to have no luck there.
Cheers

Hi Alexandre,
You can insert a report title in FileSummary Info..This will help you.
You can insert report execution data and time in the report and it is not possible to use as report name.
Thanks,
Sastry

Similar Messages

  • Report name for Export are not correct

    Hello,
    When I'm doing an export on PDF or XLS, the file name is wared, it's not taking the name of the report or in the TOP of the tree navigation in the PDF
      - Is it possible to have the rigth name ?
      - Is it possible to have the name depending on some values of the report, like date of extraction ?
    Thanks in advance
    Alex
    Edited by: Alexandre VANNIER on Oct 15, 2008 11:47 AM

    Hi Alexandre,
    You can insert a report title in FileSummary Info..This will help you.
    You can insert report execution data and time in the report and it is not possible to use as report name.
    Thanks,
    Sastry

  • I'm using the sync option for when I'm not near my desktop and no matter what it won't work its telling me my account name or password is not correct and it is!

    I'm using the sync option for when I'm not near my desktop and no matter what it won't work its telling me my account name or password is not correct and it is!

    This is from my personal experience:
    It almost happens every time I tried to connect with Sync from my Android phone, the window asking me to enter my account name and password always shows up. And if I enter the information, it'll say I have the wrong password, etc. My workaround is to click the "cancel" button. But it does not cancel immediately. The window will stay on for a while (usually a few minutes), then it'll disappear and start connecting to Sync. And it'll connect and sync successfully.
    You can try this workaround but you have to be patient to wait for the window to disappear.
    I don't know what is the cause of this, but it has happened ever since FF4 for Mobile came out. I have searched around and couldn't find any solutions.

  • Could not connect to the server because the name or password is not correct

    Everyday I use Command + K to bring up the "Connect to Server" dialog, select the server from "Favorite Servers", click the Connect button, receive a prompt to provide my credentials to access the network share, then the share mounts and I access the files on it.
    Starting yesterday I no longer get the prompt asking me to provide the domain, username and password, it just tries to connect to the server then reports the following error:
    "Could not connect to the server because the name or password is not correct."
    I've restarted my Mac but still does the same thing. I'm able to connect to other server shares just fine, prompts me for the username and password, but this one particular server just will not prompt me for the username and password.
    I've done the following to try and resolve it but without any success in doing so:
    I've restarted the server
    I ran Repair Disk Permissions in Disk Utility
    Ran Keychain Access --> First Aid --> Repair
    Tried to find an entry in Keychain to remove, none listed
    Able to connect to share within Fusion running XP
    Anything I missing?

    Hi Troy-
    It surely is starting to look like it's some kind of security setting on the Win-Server...something that's different from the other server you just patched.
    If you've looked at local and domain policies that do not 'require' digital signing, then I'm a a loss. (I don't have the exact settings, but it's been discussed here ad nauseum over the past two years)
    Has something to do with disabling digital signing of communications "always", and enabling "when possible"... other than that, I've forgotten the exact policies...Look in security policies, and you'll probably see what I'm trying to describe.
    (Glad I got my daily brain-hiccup out of the way early today!)

  • System name for alias GD4_500 not found in portal

    Hi people,
    I want to launch a query from analyzer, but i have the next error message "System name for alias GD4_500 not found in portal".
    What can i do??
    More thanks

    Read,
    http://help.sap.com/saphelp_nw70/helpdata/en/fb/93ed3d72fe4b5ae10000000a11405a/content.htm
    Regards
    Juan

  • My gmail says I cannot recieve mail because my user name or password sure not correct they are correct what should I do

    Subject
    My gmail says I cannot recieve mail because my user name or password sure not correct they are correct what should I do

    setting>mail>click on your gmail account>delete account> add account> re add your gmail account

  • Distribution system for logical system not correctly maintained

    Im logged in into SAP R/3 system. When starting transaction POIT I chose "production orders for".
    I fill in the fields for
    Plant -> 001
    Material -> T-HV200 (Ice Mix)
    At the top I have to enter a "optimization system".
    I chose the logical system I created (CE6CLNT850) from a list.
    After I hit the execute button it says:
    "Distribution system for logical system CE6CLNT850 not correctly maintained."
    The distribution model for CE6CLNT850 (transaction: BD64) looks like this:
    Componentsystem CE6 SAP R/3 4.6c----
    CE6CLNT850
         NX7CLNT800----
    NX7CLNT800,No Short text exists
               LOIPRO----
    Production order
    What is the problem here?
    And by the way, WHY DO I HAVE 479 entries in my list of logical systems when I'm trying to chose the "optimization system"???
    best regards,
    Lunatikk

    Thanks for your answer,
    the RFC destination is configured correctly. It says that the connection works when I run the test.
    I'll post it in an other forum as you suggested but I have another question:
    You said that it is possible to have 474 logical systems configured on the system.
    1. Who defined those systems and why?
    I am the first one in my company using this system.
    We ordered to a SAP system through RAC Service.
    I thought we would get a "fresh installation" of the SAP system -
    2. please correct me if I'm wrong.
    For example there are logical systems with names like "boon software" and "camstar", which are real companies.
    There aren't just logical systems configured, there are also additional RFC destinations, distribution models and ports that were there from the beginning.
    3. Is it possible that those logical systems interfere with the sending of the IDOC. Could it be possible?

  • YTD for an emp not correct

    We went live in middle of feb. We have issue with one of the wagetypes. The ytd for that wagetype is not correct. I just want to correct the YTD for the employee for that specific wagetype. I dont want it to impact anything else...i mean current deduction or previos deductions.
    How can I do this.

    To correct the YTD in the CRT is quite tricky, requiring special WTs and PCRs, but correctiong the YTD in the TCRT is usually done through Off-Cycle Year-End Adjustments (also requiring a series of special WTs).

  • Incorrect logical system name for datasources - entry not in TADIR

    Hi all,
    I currently can't replicate or edit any of my data sources because, after we applied some patches, the logical system name appears to be incorrect and a message is displayed saying the R3TR RSDS entry does not exist in table TADIR.
    For example:
    Object directory entry R3TR RSDS 0EMPLOYEE_0016_ATTR           R3DEV does not exist.
    That's correct, because all entries exist for my actual source system CD1CLNT175, not for SAP standard R3DEV.
    Does anybody have any idea how I can update my source system configuration/mapping? I've looked on the forum but couldn't
    find a clear cut answer.
    Thanks a lot!
    Markus

    Hi all,
    I think the solution lies in SAP note 1604726 "DataSources with package assignment cannot be activated"
    1. When you access the change transaction RSDS, the system issues error message TK 753 "Object directory entry R3TR ... does not exist" twice.
    2. When you try to activate the DataSource, the system issues error message TK 425 "Invalid call sequence for interfaces when recording changes".
    My message is TK753.. and before that I receive TK425, I guess we have to apply SP28... time for Mario and Luigi to apply some pizzas... ehmm patches...!
    I will let you know if that solved the problem, thanks for your help guys!
    Markus

  • HT5824 My email address on my iphone for icloud is not correct and I cant figure out how to fix it.

    How do I change the user id and password for my icloud to the correct user id and password. In other words its wrong.

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Active Directory requires display name for log in not logon name

    I have a weblogic 10 server and I have created an Active directory authenticator. I can list the users and groups in the console.
    The problem is that I can only logon using the Display name e.g. "Smith, Fred" and not the logon name e.g. "smithf"
    I would like to logon using the logon name.
    I have set in the Weblogic ActiveDirectoryAuthenticator
    User Name Attribute: cn
    User Object Class: user
    Static Group DNs from Member DN Filter: (&(member=%M)(objectclass=group))
    User From Name Filter: (&(cn=%u)(objectclass=user))
    As I said - all works fine - but I want to be able to logon with the userlogon name and not the display name. Any ideas?

    Hi,
    In the end I managed to get it working by changing all references to cn in the above to sAMAccountName as follows:
    User Name Attribute:      sAMAccountName
    User from name filter:      (&(sAMAccountName=%u)(objectclass=user))
    Group from name filter:     (&(sAMAccountName=%g)(objectclass=group))
    Static Group Name Attribute: sAMAccountName
    It seems to work, but I am not sure it is correct becasue I don't know much about AD.

  • Using AS Linkage name for embedded font not working in CS6

    "Myriad Pro" with bold and italic styles embedded with the linkage names "Body", "BodyBold" and "BodyItalic".
    Creating a TextField using Flash CS6's toolbar and setting its font to "Body*" works fine, but not when its htmlText value has <b> and <em>, etc, tags.
    This also does not work:
    style.setStyle(".something", {fontFamily:"BodyBold"});
    ... but this does:
    style.setStyle(".something", {fontFamily:"Myriad Pro Bold"});
    Using the AS Linkage name worked in prior versions. I like using them because I can change global fonts for "stage" elements.

    Justin_WX wrote:
    So on the list it says Arial http://support.apple.com/kb/ht5484 which is a font from Apple, which is different from Microsoft, but are named the same...
    Is there a list of Microsoft Fonts that will work with Pages?
    Are you actually seeing a noticeable difference in the fonts after conversion? While there are some difference between those fonts, they are very subtle differences and in all likelihood will not really change the look of the document.

  • URGENT:  Reconiliation account is blocked for posting or not correct

    HI,
    i am working with IS utilites ... electricity...
    i am getting this error during invoicing...

    Hi,
    First of all, check and see if the reconciliation account is not blocked for posting in FI, use transaction FS00 for this.
    If you don't get a reconciliation account with this error, you must determine what main transaction is used for invoicing and check if the account determination is correct using transaction EK01. You must make sure that the combination of company code, division, account determination ID and main transaction gives you the correct reconciliation account.
    Please let me know if this helped or provide some additional information about the error.
    Bogdan

  • My up button for volume does not work and need to turn incoming call volume up. is there an app to do this

    my up volume button does not work and i need to turn the incall volume up. is there an app that does this?

    Hey skeith75,
    Thanks for the question. Based on the information you have provided, your iPhone may need to be serviced to fix that button. However, if in the meantime you would like a workaround for turning the volume up on a phone call, you can use Assistive Touch:
    iOS: Using AssistiveTouch
    http://support.apple.com/kb/HT5587
    If you do wish to service your iPhone, the following link should help you get started with the process. Included, you will find information on topics such as warranty, service pricing, and express replacement service.
    Apple - Support - Service Answer Center
    http://www.apple.com/support/iphone/service/faq/
    Thanks,
    Matt M.

  • How to re name for search and not ......

    When i have entered album from old EG mantavani folk song round the world .into i tune
    I cannot find it as the name list is mantavani
    Why is it that when adding name and title under name and artist  to find in search . some stupid up date hits in and the title come up with a load of other albums under the list nothing to do with the composer ?
    This up date pop up goes through a list of artists . Why
    I tunes has been out for a long time and still many issues like album art work is still no fixed . Like an answere please .
    thank you .

    As with your iPod when connected to iTunes, the iPhone has various tabs for your iPhone sync preferences with iTunes. Your iPod and your iPhone can have different sync preferences.
    If you don't want to transfer any music to your iPhone, don't select Sync Music under the Music tab for your iPhone sync preferences. If you don't want to sync any video to your iPhone, don't select sync Movies and TV Shows under your iPhone sync preferences.
    Under the Applications tab for your iPhone sync preferences, you will select Sync Applications with the following options below.
    All Applications to transfer all available applications to your iPhone, or choose Selected Applications followed by selecting the applications in the window below that you want transferred to your iPhone followed by a sync.

Maybe you are looking for