BSI error message in US payroll log

Hi,
I have updated the configuration for a new US tax authority (Mount Lebanon). When I run payroll for the employee that the change effects, I get the following BSI error message:
"1044 Your request to use the additional tax code 9 for the Mount Lebanon local service tax is not allowed. This tax has been calculated using no additional tax. BSI Tax Calculation."
In fact, it didn't calculate the tax. How do I resolve this?
Thanks,
Nic

I'm encountering the same area for the Local Services Tax, but for a different tax authority. I believe I have all the tax config in place, but I must have missed something. Is there anything particular that you remember about the error or the config?

Similar Messages

Display error message in batch job log

Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?

Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Getting an error message when trying to log on to imessage

Getting an error message when trying to log on to imessage... how do I fix this

Whart does the message say?
Maybe:
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages

I keep getting an error message when I try logging into i-tunes, what can be the problem?

I keep getting an error message when I try logging into i_tunes, what can be the problem?

Can you say what the message is?

Custom error message in SAP application log

Is there a way to add a custom error message to the SAP application log without passing the message variables MSGV1, MSGV2, MSGV3, MSGV4 and the Message class and number.
We want to pass a custom message from the BAPIRET2-MESSAGE without giving it a Message class and number. The reason for this is that we are using class based exceptions instead of the traditional message class with errors. When we catch the class based exception, we take the error text of the exception and put in in the BAPIRET2-message and set the BAPIRET2-TYPE as 'E'. Now we want to add this to the SAP application log.
The call to 'BAL_LOG_MSG_ADD' takes a structure BAL_S_MSG which is just like BAPIRET2. However this function builds the entry to the application log use the message variables MSGV1, MSGV2, MSGV3, MSGV4. There is no provision to pass in the BAPIRET2 message.
Add message to application log
CALL FUNCTION 'BAL_LOG_MSG_ADD'
 EXPORTING
 i_log_handle = app_log_handle
 i_s_msg = log_message
Thanks,
Jay

Hi Jay,
Did you see BAL_LOG_EXCEPTION_ADD?
This FM is represented by the structure BAL_S_EXC. This can have various versions as described below:
Data of BAL_S_EXC Structure / Use
EXCEPTION / Exception class from which an exception text
 is added to the log. This field must be filled.
MSGTY / Message type (MSGTY) of a T100 message.
 This field must also be filled for exceptions.
PROBCLASS,
DETLEVEL,
ALSORT, TIME_STMP / Message or exception attributes, such as
 problem class (PROBCLASS, for
 example, "very important"), level of detail
 (DETLEVEL, from 1 to 9), sort criterion
 (ALSORT, unrestricted) and timestamp
 (TIME_STMP). These fields can be displayed
 in the log (except TIME_STMP).
MSG_COUNT / This attribute is not used for exceptions.
Follow the link below for more details:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/d6/5d7f38f52f923ae10000009b38f8cf/frameset.htm">SAP Help DOc</a>
Hope this helps.
Thanks
Sanjeev

Lots of Anyconnect Error Message in Windows Event Log

Hi Community.
We have lots of Anyconnect Error Messages in the Windows Event Log. Following two examples.
Can anyone tell me why these errors appears and how do I fix them ? I already installed the newest Anyconnect on my machine.
Thanks in advance and Kind Regards Patrick
Example 1
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97564</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::logProbeFailure File: .\NetEnvironment.cpp Line: 1432 Invoked Function: CHttpProbeAsync::SendProbe Return Code: -27066354 (0xFE63000E) Description: HTTP_PROBE_ASYNC_ERROR_CANNOT_CONNECT HTTP (host: 109.164.211.237)</Data>
</EventData>
Example 2
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97565</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::TestAccessToSG File: .\NetEnvironment.cpp Line: 1385 Invoked Function: CNetEnvironment::analyzeHttpResponse Return Code: -28966899 (0xFE46000D) Description: NETENVIRONMENT_ERROR_PROBE_INCOMPLETE:Network Probe could not contact target</Data>
</EventData>

HI and welcome to Discussions,
in my personal opinion there is not much for you to worry about.
The 'Windows Tool for the elimination of malware' is nothing you miss as long as you have a decent Anti-Virus Software running.
The update for the IE 7 might be missing an installed IE 7, which can do by downloading it yourself from Microsofts webpage.
If you don't use the IE but something like Firefox or Opera or Safari, than don't bother with these update.
Stefan

With the error message in my sqlnet.log,what can I do?

I am installing Oracle IAS Today in my win2000 server system.When I restart my computer,I fond these message in the sqlnet.log file :
Fatal NI connect error 12515, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=yfz)(PORT=1521))(CONNECT_DATA=(SERVER=SHARED)(SERVICE_NAME=mouse)(PRESENTATION=http://admin)(CID=(PROGRAM=D:\Program Files\Oracle\jre\1.1.7\bin\jrew.exe)(HOST=YFZ)(USER=Administrator))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.1.7.0.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 8.1.7.0.0 - Production
Time: 25-1TB -2002 16:02:39
Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12564
TNS-12564: TNS#:>\>xA,=S(refuse connect)
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
What the problem is ?
Any help appreciate!

The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Error Message in portal application.log

Hi all,
There are error messages continually been written to application.log.
Here is the path.
$ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log
We couldn't find out what's wrong.
Portal Version is 10.1.2.2.0.
application.log
07/01/31 16:54:54 portal: [module=RepositoryServlet, ecid=103102642203,1] ERROR: Repository Gateway error: Request Processing Error:
maxlength.htc: PROCEDURE DOESN'T EXIST
07/01/31 17:23:44 portal: [module=RepositoryServlet, ecid=133169185626,1] ERROR: Repository Gateway error: Request Processing Error:
maxlength.htc: PROCEDURE DOESN'T EXIST
07/01/31 17:23:58 portal: Broken pipe
07/01/31 17:23:58 portal: Broken pipe
07/01/31 17:23:58 portal: id=146054097151,1 Exception processing portlet response
java.lang.ArrayIndexOutOfBoundsException
     at java.lang.System.arraycopy(Native Method)
     at com.evermind.server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:216)
     at com.evermind.server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:151)
     at oracle.webdb.repository.service.RepositoryHttpResponseWrapper$RepositoryOutputStreamWrapper.write(Unknown Source)
     at oracle.webdb.page.CharConvertingOutputStream.write(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.addToOutputStream(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.includePortlet(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.parseLayout(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.assemblePage(Unknown Source)
     at oracle.webdb.page.v2.BaseDataProcessor.process(Unknown Source)
     at oracle.webdb.page.PageBuilder.process(Unknown Source)
     at oracle.webdb.page.Main.doRequest(Unknown Source)
     at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:834)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:260)
     at oracle.webdb.portal.servlet.PortalServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:834)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:340)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:228)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
----------------------

$ORACLE_HOME/j2ee/OC4J_Portal/application-deployments/portal/OC4J_Portal_default_island_1/application.log
os the log of the "parent application". This is rather high level in the container. The message in the logfiles tells you that a procedure doesn't exist.
This can mean 3 things:
1. The procedure really doesn't exist
2. The procedure expects different parameters then passed
3. In the procedure a specific array member is called (but not found). (don't know how to explain this better in English, sorry for that).
It has been a while since I touched portal. In the past portal used a DAD (located in your HTTP-Server configuration). By changing the error style of the dad, you might find a more comprohensive error message.

How to add custom error message in standard application log of change doc.

Hi,
While saving chnage document I need to add raise an error on specific condition. As Error messages is being shown in application log I added custom message in include LCRM_1O_UIF15 by using BAL_LOG_MSG_ADD FM however it is not showing in the screen. What could be the reason? Can anybody please explain?
Rgds
Sudhanshu

Muhammed,
Have you tried throwing a JboException in your AM code?
John

Error message when trying to log on to Desk Top Manager

I tried to log on to my Desktop manager last night and keep getting this same message.
The WIndows Installer keeps coming up and it is looking for the file "Blackberry 7130e.msi". The Blackberry that I had previous to the Curve was a 7130, but I have not had that BB for almost a year. I have used desktop manager many times since I got the Curve with no problems.
My service provider is U.S. Cellular and I have contacted them. The data tech I talked with has never heard of this problem so was unable to help.
I have completely uninstalled all versions of the desktop manager. Reinstalled the most current version and still I am getting this message when I try to open the DT Manager.
I then uninstalled 5.1. The 4. is still showing up in my list of programs when I go to the windows Install/Unistall program. I try to get rid of the 4. program and the windows installer comes up. I click on cancel and it appears that the program uninstalled. If I close Install/Uninstall and then reopen it the program is right there back on the list and has not uninstalled.
I have also searched my whole computer and the installation disk that came with the 7130 and the Curve and the file it keeps requesting is no where to be found.
I have also tried downloading the 7130e download from the BB website and I keep getting the same error message and nothing will install.
I hope you have a solution as I have spent well over 3 hours trying to fix this just so I can use this program with my phone. I am beginning to think I should have gotten an HTC Windows Mobile Device instead.

Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101    Tips & Tricks
See if this kb helps:   http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB12847&slic...
I'm not sure that you saw the error msg. included in the kb, but it discusses removing .msi files from previous installations of DM.   Post back and let us know how it goes.
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Need to find the way to get the actual error message in the alert log.

Hi,
I have configured OEM 11G and monitoring target versions are from 9i to 11g. Now my problem is i have defined the metrics for monitoring the alert log contents and OEM is sending alert if there is any error in the alert log but it is not showing the actual error message just it is showing as below.
============================
Target Name=IDMPRD
Target type=Database Instance
Host=oidmprd01.ho.abc.com
Occurred At=Dec 21, 2011 12:05:21 AM GMT+03:00
Message=1 distinct types of ORA- errors have been found in the alert log.
Metric=Generic Alert Log Error Status
Metric value=1
Severity=Warning
Acknowledged=No
Notification Rule Name=RULE_4_PROD_DATABASES
Notification Rule Owner=SYSMAN
============================
Is there any way to get the complete error details in the OEM alert itself.
Regards
DBA.

You need to look at the Alert Log error messages, not the "status" messages. See doc http://docs.oracle.com/cd/E11857_01/em.111/e16285/oracle_database.htm#autoId2

Error Message When trying to log into the IM7.1

[18 Jul 2006 17:13:10,484] INFO xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] Failed to create SSO token for jsoap
Any Help Appreciated
Carinus

I have posted it to your gmail account but I posting here as well just in case I got a crash on my mail client when I sent it. I got a error message for the log4j when I made the change in the conf file.
log4j:WARN No appenders could be found for logger (nbcollab.nio).
log4j:WARN Please initialize the log4j system properly.
xmppd.log
[19 Jul 2006 10:52:17,285] INFO xmppd [main] Starting XMPP Server: Version 7.1
[19 Jul 2006 10:52:20,964] INFO xmppd [main] RealmClassName com.iplanet.im.server.IdentityRealm
[19 Jul 2006 10:52:20,964] DEBUG xmppd [main] Creating realm for first time com.iplanet.im.server.IdentityRealm
[19 Jul 2006 10:52:24,293] DEBUG xmppd [main] [LDAPPool] binding as cn=dsameuser,ou=DSAME Users,o=msp
[19 Jul 2006 10:52:24,294] DEBUG xmppd [main] [LDAPPool] creating a new context
[19 Jul 2006 10:52:28,944] DEBUG xmppd [main] [FileGroupChatStorage] root dir = /var/opt/sun/im/default/db/pubsub
[19 Jul 2006 10:52:28,944] DEBUG xmppd [main] [FileGroupChatStorage] loaded /var/opt/sun/im/default/db/pubsub
[19 Jul 2006 10:52:37,322] DEBUG xmppd [main] [Identity] open called, getting user attributes names.
[19 Jul 2006 10:52:37,466] DEBUG xmppd [main] [Identity] sunIM user service attributes: [sunIMUserProperties, sunIMUserRoster, sunIMUserConferenceRoster, sunIMUserNewsRoster, sunIMUserPrivateSettings]
[19 Jul 2006 10:52:37,467] DEBUG xmppd [main] [Identity] sunIM dynamic service attributes: [sunIMProperties, sunIMPrivateSettings, sunIMNewsRoster, sunIMRoster, sunIMConferenceRoster]
[19 Jul 2006 10:52:37,467] DEBUG xmppd [main] [Identity] sunIM policy attributes: [sunIMAllowPollingAccess, sunIMAllowContactListManage, sunIMAllowAlertsAccess, sunIMAllowPollingSend, sunIMAllowChatInvite, sunIMAllowFileTransfer, sunIMAllowChat, sunIMAllowForumManage, sunIMAllowNewsManage, sunIMAllowNewsAccess, sunIMAllowForumAccess, sunIMAllowForumModerate, sunIMAllowUserSettings, sunIMAllowAlertsSend]
[19 Jul 2006 10:52:37,681] DEBUG xmppd [main] [Identity] sunPresence user service attributes: [sunPresenceEntityAccessDenied, sunPresenceEntityDevices, sunPresenceEntityDefaultAccess, sunPresenceEntityAccessPermitted, sunPresenceUserPrivacy]
[19 Jul 2006 10:52:37,682] DEBUG xmppd [main] [Identity] sunPresence dynamic service attributes: [sunPresenceAccessDenied, sunPresenceDefaultAccess, sunPresenceDevices, sunPresenceAccessPermitted, sunPresencePrivacy]
[19 Jul 2006 10:52:37,682] DEBUG xmppd [main] [Identity] sunPresence policy attributes: [sunPresenceAllowPublish, sunPresenceAllowManage, sunPresenceAllowAccess]
[19 Jul 2006 10:52:37,691] DEBUG xmppd [main] [Identity] getServiceVersion Exception: Service does not exist : SunIMService
[19 Jul 2006 10:52:37,692] INFO xmppd [main] [Identity] no old sunIMService attributes: Service does not exist : SunIMService
[19 Jul 2006 10:52:41,961] DEBUG xmppd [main] [Identity] admin role DNs: [cn=IM Administrator,o=msp]
[19 Jul 2006 10:52:41,961] DEBUG xmppd [main] [Identity] admin role DN: cn=IM Administrator,o=msp
[19 Jul 2006 10:52:41,985] DEBUG xmppd [main] [Identity] admin user DNs: []
[19 Jul 2006 10:52:42,003] DEBUG xmppd [main] [Identity] topics role DN: cn=IM News Administrator,o=msp
[19 Jul 2006 10:52:42,042] DEBUG xmppd [main] [Identity] rooms role DN: cn=IM Conference Rooms Administrator,o=msp
[19 Jul 2006 10:52:42,060] DEBUG xmppd [main] [Identity] send alerts role DN: cn=IM Allow Send Alerts Role,o=msp
[19 Jul 2006 10:52:42,078] DEBUG xmppd [main] [Identity] watch role DN: cn=IM Allow Watch Changes Role,o=msp
[19 Jul 2006 10:52:42,097] DEBUG xmppd [main] [Identity] save user settings role DN: cn=IM Allow User Settings Role,o=msp
[19 Jul 2006 10:52:43,508] DEBUG xmppd [main] [Identity] _topicsDefault: deny
[19 Jul 2006 10:52:43,509] DEBUG xmppd [main] [Identity] _roomsDefault: deny
[19 Jul 2006 10:52:43,509] DEBUG xmppd [main] [Identity] _sendAlertsDefault: allow
[19 Jul 2006 10:52:43,509] DEBUG xmppd [main] [Identity] _saveUserSettingsDefault: allow
[19 Jul 2006 10:52:43,509] DEBUG xmppd [main] [Identity] _watchDefault: allow
[19 Jul 2006 10:52:43,509] INFO xmppd [main] Loaded realm: com.iplanet.im.server.IdentityRealm
[19 Jul 2006 10:52:43,619] INFO xmppd [main] Monitoring is disabled
[19 Jul 2006 10:52:43,625] INFO xmppd [main] XMPP Server, version 7.1 Starting
[19 Jul 2006 10:52:43,670] DEBUG xmppd [main] [Archive] not loaded yet
[19 Jul 2006 10:52:43,670] DEBUG xmppd [main] [Archive] initializing archive providers
[19 Jul 2006 10:52:43,710] INFO xmppd [main] [Archive] loaded archive provider: com.iplanet.im.server.EmailIMArchive
[19 Jul 2006 10:52:43,710] INFO xmppd [main] [Archive] autoarchive=false
[19 Jul 2006 10:52:43,710] DEBUG xmppd [main] [Archive] finished loading
[19 Jul 2006 10:52:43,745] DEBUG xmppd [Timer-1] [EmailIMArchive] submit called:
[19 Jul 2006 10:52:43,973] DEBUG xmppd [main] [Disco] new key: muc new size=1
[19 Jul 2006 10:52:43,974] DEBUG xmppd [main] [Disco] new key: pubsub new size=2
[19 Jul 2006 10:52:43,974] DEBUG xmppd [main] [Disco] new key: jud new size=3
[19 Jul 2006 10:52:43,978] DEBUG xmppd [main] ServerSocketChannel on: null Port: 5269
[19 Jul 2006 10:52:44,009] WARN xmppd [main] [S2SSession] server ID = null
[19 Jul 2006 10:52:44,012] DEBUG xmppd [main] [PeerServer] connecting to peers
[19 Jul 2006 10:52:44,014] INFO xmppd [main] [Multiplex] starting on 0.0.0.0:45222
[19 Jul 2006 10:52:44,015] INFO xmppd [main] Server start completed
[19 Jul 2006 10:52:44,015] INFO xmppd [Thread-14] [NioSelectAcceptor][0.0.0.0:5269] Acceptor starting
[19 Jul 2006 10:52:44,578] INFO xmppd [Thread-15] New Multiplexor Connection started from /127.0.0.1
[19 Jul 2006 10:52:44,585] INFO xmppd [Thread-15] New Multiplexor Connection started from /127.0.0.1
[19 Jul 2006 10:52:44,586] DEBUG xmppd [Thread-16] MultiplexManager#33185374 buffered bytes: 0
[19 Jul 2006 10:52:44,588] ERROR xmppd [Thread-16] MultiplexManager#33185374 read error java.io.IOException: Connection reset by peer
[19 Jul 2006 10:52:44,589] ERROR xmppd [Thread-16] MultiplexManager#33185374 error sending BYE
[19 Jul 2006 10:52:44,589] INFO xmppd [Thread-16] MultiplexManager#33185374 exiting
[19 Jul 2006 10:52:44,590] DEBUG xmppd [Thread-17] MultiplexManager#24211360 buffered bytes: 0
[19 Jul 2006 10:52:44,596] INFO xmppd [Thread-17] MultiplexManager#24211360 HELLO received version=4.1 maxchannels=1002
[19 Jul 2006 10:52:44,597] DEBUG xmppd [Thread-17] MultiplexManager#24211360 buffered bytes: 0
[19 Jul 2006 10:52:44,606] INFO xmppd [Thread-15] New Multiplexor Connection started from /127.0.0.1
[19 Jul 2006 10:52:44,606] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 0
[19 Jul 2006 10:52:44,607] INFO xmppd [Thread-18] MultiplexManager#31447311 HELLO received version=4.1 maxchannels=1002
[19 Jul 2006 10:52:44,607] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 0
[19 Jul 2006 10:53:17,416] DEBUG xmppd [Thread-18] MultiplexManager#31447311 OPEN Payload len=8
[19 Jul 2006 10:53:17,452] DEBUG xmppd [ThreadPoolManager:default] Starting activity check; inactivity timeout=900000 now=1153299197450
[19 Jul 2006 10:53:17,453] DEBUG xmppd [ThreadPoolManager:default] Completed activity check for 0 channels.
[19 Jul 2006 10:53:17,500] DEBUG xmppd [Thread-18] useTLS : false
[19 Jul 2006 10:53:17,500] DEBUG xmppd [Thread-18] useTLS1 : false
[19 Jul 2006 10:53:17,500] DEBUG xmppd [Thread-18] useSASL : true
[19 Jul 2006 10:53:17,513] DEBUG xmppd [Thread-18] FSN : <features xmlns='http://etherx.jabber.org/streams'><mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><mechanism>PLAIN</mechanism></mechanisms><auth xmlns='http://jabber.org/features/iq-auth'/></features>
[19 Jul 2006 10:53:17,513] DEBUG xmppd [Thread-18] tlsFN : null
[19 Jul 2006 10:53:17,606] DEBUG xmppd [Thread-18] Session[null] outbound status changed from disconnected to connected
[19 Jul 2006 10:53:17,607] DEBUG xmppd [Thread-18] Session[null] inbound status changed from disconnected to connected
[19 Jul 2006 10:53:17,607] DEBUG xmppd [Thread-18] mxchnl[1] created, addr=/172.18.2.43
[19 Jul 2006 10:53:17,607] DEBUG xmppd [Thread-18] MultiplexManager#31447311 New channel 1 client address:/172.18.2.43
[19 Jul 2006 10:53:17,608] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 0
[19 Jul 2006 10:53:17,608] DEBUG xmppd [Thread-18] MultiplexManager#31447311 data received for channel 1 com.iplanet.im.server.MultiplexChannel@dc1f04
[19 Jul 2006 10:53:17,610] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] ClientSession started process()
[19 Jul 2006 10:53:17,611] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] Session[null] processing input
[19 Jul 2006 10:53:17,625] DEBUG xmppd [Thread-18] MultiplexManager#31447311 addRunnable: 1
[19 Jul 2006 10:53:17,625] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 0
[19 Jul 2006 10:53:17,728] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] Session[null] inbound status changed from connected to opened
[19 Jul 2006 10:53:17,728] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] [Session] expecting SASL support from client
[19 Jul 2006 10:53:17,728] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] [Session] opened.
[19 Jul 2006 10:53:17,730] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] [Session] Opening client session to proxy1.mrc.ac.za
[19 Jul 2006 10:53:17,732] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] [Session] opening outbound
[19 Jul 2006 10:53:17,737] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] Session[null] outbound status changed from connected to opened
[19 Jul 2006 10:53:17,737] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] [Session] opened outbound
[19 Jul 2006 10:53:17,744] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] [Session] opened.
[19 Jul 2006 10:53:17,744] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] Session[null] processing input
[19 Jul 2006 10:53:17,745] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] Session[null] processed input
[19 Jul 2006 10:53:17,745] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] ClientSession started process()
[19 Jul 2006 10:53:17,746] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] processing input
[19 Jul 2006 10:53:17,746] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] processed input
[19 Jul 2006 10:53:17,746] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] ClientSession finished process()
[19 Jul 2006 10:53:17,747] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] Session[null] processed input
[19 Jul 2006 10:53:17,747] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 0] ClientSession finished process()
[19 Jul 2006 10:53:18,074] DEBUG xmppd [Thread-18] MultiplexManager#31447311 data received for channel 1 com.iplanet.im.server.MultiplexChannel@dc1f04
[19 Jul 2006 10:53:18,074] DEBUG xmppd [Thread-18] MultiplexManager#31447311 addRunnable: 1
[19 Jul 2006 10:53:18,074] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 96
[19 Jul 2006 10:53:18,075] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] ClientSession started process()
[19 Jul 2006 10:53:18,075] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Session[null] processing input
[19 Jul 2006 10:53:18,085] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Session[null] processing request
[19 Jul 2006 10:53:18,085] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [ClientPacketDispatcher] SASLPacket detected
[19 Jul 2006 10:53:18,085] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] new packet
[19 Jul 2006 10:53:18,086] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] IS SASLAuthPacket
[19 Jul 2006 10:53:18,086] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] mechanism PLAIN
[19 Jul 2006 10:53:18,091] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] saslProvider : com.iplanet.im.server.sasl.PlainSASLProvider@135da43
[19 Jul 2006 10:53:18,092] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] requestFailed : false
[19 Jul 2006 10:53:18,093] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] saslProvider.isRaw() : false
[19 Jul 2006 10:53:18,100] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] request status : {urn:ietf:params:xml:ns:xmpp-sasl}auth
[19 Jul 2006 10:53:18,100] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] PLAIN mechanism requested
[19 Jul 2006 10:53:18,101] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] Authenticating user jisolder
[19 Jul 2006 10:53:18,101] INFO xmppd [org.netbeans.lib.collab.util.Worker 2] Authenticating using Identity Server SSO
[19 Jul 2006 10:53:18,111] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Unable to create SSOToken - the specified token might be a password.
[19 Jul 2006 10:53:18,112] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] domain = mrc.ac.za
[19 Jul 2006 10:53:18,283] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] getSearchBase(mrc.ac.za)=o=mrc.ac.za,o=msp
[19 Jul 2006 10:53:18,290] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] domain=mrc.ac.za OrgDN=o=mrc.ac.za,o=msp
[19 Jul 2006 10:53:18,640] INFO xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] Failed to create SSO token for jisolder
[19 Jul 2006 10:53:18,641] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] request status : 0
[19 Jul 2006 10:53:18,641] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] response status : 3
[19 Jul 2006 10:53:18,646] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Session[class com.iplanet.im.server.ClientSession null] authFailed - null
[19 Jul 2006 10:53:18,646] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Session[null] processed input
[19 Jul 2006 10:53:18,646] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] ClientSession finished process()
[19 Jul 2006 10:53:18,676] DEBUG xmppd [Thread-18] MultiplexManager#31447311 data received for channel 1 com.iplanet.im.server.MultiplexChannel@dc1f04
[19 Jul 2006 10:53:18,676] DEBUG xmppd [Thread-18] MultiplexManager#31447311 addRunnable: 1
[19 Jul 2006 10:53:18,676] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 16
[19 Jul 2006 10:53:18,677] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] ClientSession started process()
[19 Jul 2006 10:53:18,677] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] processing input
[19 Jul 2006 10:53:18,677] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] inbound status changed from opened to closed
[19 Jul 2006 10:53:18,678] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] outbound status changed from opened to closed
[19 Jul 2006 10:53:18,678] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] mxchnl[1] closing
[19 Jul 2006 10:53:18,679] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] MultiplexManager#31447311 channel 1 terminated.
[19 Jul 2006 10:53:18,679] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] outbound status changed from closed to disconnected
[19 Jul 2006 10:53:18,679] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] inbound status changed from closed to disconnected
[19 Jul 2006 10:53:18,679] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] inbound status reset from disconnected to disconnected
[19 Jul 2006 10:53:18,680] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] processed input
[19 Jul 2006 10:53:18,680] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] ClientSession finished process()
[19 Jul 2006 10:53:44,595] DEBUG xmppd [Timer-0] MultiplexManager#11442116 Starting activity check at 1153299224595
[19 Jul 2006 10:53:44,596] DEBUG xmppd [Timer-0] MultiplexManager#11442116 Completed activity check
[19 Jul 2006 10:53:44,625] DEBUG xmppd [Timer-0] MultiplexManager#7202313 Starting activity check at 1153299224625
[19 Jul 2006 10:53:44,626] DEBUG xmppd [Timer-0] MultiplexManager#7202313 Completed activity check
[19 Jul 2006 10:54:17,425] DEBUG xmppd [ThreadPoolManager:default] Starting activity check; inactivity timeout=900000 now=1153299256925
[19 Jul 2006 10:54:17,426] DEBUG xmppd [ThreadPoolManager:default] Completed activity check for 0 channels.
[19 Jul 2006 10:54:30,110] DEBUG xmppd [Thread-18] MultiplexManager#31447311 OPEN Payload len=8
[19 Jul 2006 10:54:30,111] DEBUG xmppd [Thread-18] useTLS : false
[19 Jul 2006 10:54:30,111] DEBUG xmppd [Thread-18] useTLS1 : false
[19 Jul 2006 10:54:30,111] DEBUG xmppd [Thread-18] useSASL : true
[19 Jul 2006 10:54:30,112] DEBUG xmppd [Thread-18] FSN : <features xmlns='http://etherx.jabber.org/streams'><mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><mechanism>PLAIN</mechanism></mechanisms><auth xmlns='http://jabber.org/features/iq-auth'/></features>
[19 Jul 2006 10:54:30,112] DEBUG xmppd [Thread-18] tlsFN : null
[19 Jul 2006 10:54:30,113] DEBUG xmppd [Thread-18] Session[null] outbound status changed from disconnected to connected
[19 Jul 2006 10:54:30,113] DEBUG xmppd [Thread-18] Session[null] inbound status changed from disconnected to connected
[19 Jul 2006 10:54:30,113] DEBUG xmppd [Thread-18] mxchnl[2] created, addr=/172.18.2.43
[19 Jul 2006 10:54:30,114] DEBUG xmppd [Thread-18] MultiplexManager#31447311 New channel 2 client address:/172.18.2.43
[19 Jul 2006 10:54:30,114] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 0
[19 Jul 2006 10:54:30,145] DEBUG xmppd [Thread-18] MultiplexManager#31447311 data received for channel 2 com.iplanet.im.server.MultiplexChannel@1195c2b
[19 Jul 2006 10:54:30,146] DEBUG xmppd [Thread-18] MultiplexManager#31447311 addRunnable: 1
[19 Jul 2006 10:54:30,146] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 121
[19 Jul 2006 10:54:30,146] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] ClientSession started process()
[19 Jul 2006 10:54:30,146] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] processing input
[19 Jul 2006 10:54:30,147] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] inbound status changed from connected to opened
[19 Jul 2006 10:54:30,147] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] [Session] expecting SASL support from client
[19 Jul 2006 10:54:30,148] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] [Session] opened.
[19 Jul 2006 10:54:30,149] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] [Session] Opening client session to proxy1.mrc.ac.za
[19 Jul 2006 10:54:30,149] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] [Session] opening outbound
[19 Jul 2006 10:54:30,150] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] outbound status changed from connected to opened
[19 Jul 2006 10:54:30,150] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] [Session] opened outbound
[19 Jul 2006 10:54:30,151] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] [Session] opened.
[19 Jul 2006 10:54:30,152] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] processing input
[19 Jul 2006 10:54:30,152] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] processed input
[19 Jul 2006 10:54:30,152] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] processed input
[19 Jul 2006 10:54:30,152] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] ClientSession finished process()
[19 Jul 2006 10:54:30,152] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] ClientSession started process()
[19 Jul 2006 10:54:30,152] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] processing input
[19 Jul 2006 10:54:30,153] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] Session[null] processed input
[19 Jul 2006 10:54:30,153] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 1] ClientSession finished process()
[19 Jul 2006 10:54:30,163] DEBUG xmppd [Thread-18] MultiplexManager#31447311 data received for channel 2 com.iplanet.im.server.MultiplexChannel@1195c2b
[19 Jul 2006 10:54:30,164] DEBUG xmppd [Thread-18] MultiplexManager#31447311 addRunnable: 1
[19 Jul 2006 10:54:30,164] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 96
[19 Jul 2006 10:54:30,164] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] ClientSession started process()
[19 Jul 2006 10:54:30,164] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Session[null] processing input
[19 Jul 2006 10:54:30,165] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Session[null] processing request
[19 Jul 2006 10:54:30,166] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [ClientPacketDispatcher] SASLPacket detected
[19 Jul 2006 10:54:30,166] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] new packet
[19 Jul 2006 10:54:30,166] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] IS SASLAuthPacket
[19 Jul 2006 10:54:30,166] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] mechanism PLAIN
[19 Jul 2006 10:54:30,166] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] saslProvider : com.iplanet.im.server.sasl.PlainSASLProvider@cd83d8
[19 Jul 2006 10:54:30,166] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] requestFailed : false
[19 Jul 2006 10:54:30,166] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] saslProvider.isRaw() : false
[19 Jul 2006 10:54:30,167] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] request status : {urn:ietf:params:xml:ns:xmpp-sasl}auth
[19 Jul 2006 10:54:30,167] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] PLAIN mechanism requested
[19 Jul 2006 10:54:30,167] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] Authenticating user ccarelse
[19 Jul 2006 10:54:30,167] INFO xmppd [org.netbeans.lib.collab.util.Worker 2] Authenticating using Identity Server SSO
[19 Jul 2006 10:54:30,168] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Unable to create SSOToken - the specified token might be a password.
[19 Jul 2006 10:54:30,169] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] domain = mrc.ac.za
[19 Jul 2006 10:54:30,169] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] getSearchBase(mrc.ac.za)=o=mrc.ac.za,o=msp
[19 Jul 2006 10:54:30,169] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] domain=mrc.ac.za OrgDN=o=mrc.ac.za,o=msp
[19 Jul 2006 10:54:30,239] INFO xmppd [org.netbeans.lib.collab.util.Worker 2] [Identity] Failed to create SSO token for ccarelse
[19 Jul 2006 10:54:30,239] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] request status : 0
[19 Jul 2006 10:54:30,239] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] [Sasl] response status : 3
[19 Jul 2006 10:54:30,243] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Session[class com.iplanet.im.server.ClientSession null] authFailed - null
[19 Jul 2006 10:54:30,243] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] Session[null] processed input
[19 Jul 2006 10:54:30,244] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 2] ClientSession finished process()
[19 Jul 2006 10:54:30,259] DEBUG xmppd [Thread-18] MultiplexManager#31447311 data received for channel 2 com.iplanet.im.server.MultiplexChannel@1195c2b
[19 Jul 2006 10:54:30,259] DEBUG xmppd [Thread-18] MultiplexManager#31447311 addRunnable: 1
[19 Jul 2006 10:54:30,259] DEBUG xmppd [Thread-18] MultiplexManager#31447311 buffered bytes: 16
[19 Jul 2006 10:54:30,259] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] ClientSession started process()
[19 Jul 2006 10:54:30,260] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] processing input
[19 Jul 2006 10:54:30,260] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] inbound status changed from opened to closed
[19 Jul 2006 10:54:30,260] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] outbound status changed from opened to closed
[19 Jul 2006 10:54:30,261] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] mxchnl[2] closing
[19 Jul 2006 10:54:30,261] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] MultiplexManager#31447311 channel 2 terminated.
[19 Jul 2006 10:54:30,261] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] outbound status changed from closed to disconnected
[19 Jul 2006 10:54:30,261] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] inbound status changed from closed to disconnected
[19 Jul 2006 10:54:30,261] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] inbound status reset from disconnected to disconnected
[19 Jul 2006 10:54:30,261] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] Session[null] processed input
[19 Jul 2006 10:54:30,262] DEBUG xmppd [org.netbeans.lib.collab.util.Worker 3] ClientSession finished process()
[19 Jul 2006 10:54:43,755] DEBUG xmppd [Timer-1] [EmailIMArchive] submit called:
[19 Jul 2006 10:54:44,605] DEBUG xmppd [Timer-0] MultiplexManager#11442116 Starting activity check at 1153299284605
[19 Jul 2006 10:54:44,606] DEBUG xmppd [Timer-0] MultiplexManager#11442116 Completed activity check
[19 Jul 2006 10:54:44,635] DEBUG xmppd [Timer-0] MultiplexManager#7202313 Starting activity check at 1153299284635
[19 Jul 2006 10:54:44,636] DEBUG xmppd [Timer-0] MultiplexManager#7202313 Completed activity check
[19 Jul 2006 10:55:17,435] DEBUG xmppd [ThreadPoolManager:default] Starting activity check; inactivity timeout=900000 now=1153299316515
[19 Jul 2006 10:55:17,436] DEBUG xmppd [ThreadPoolManager:default] Completed activity check for 0 channels.

FM error message - related to payroll

Hi all,
HR is getting the following error message when they run payroll: "No earmarked funds found for external document XXXX" (Message no. RE154).
Here is the explanation for this message: "You want to post a document which references earmarked funds with the external document number XXXX. The system could not find these earmarked funds."
The document number that the message refers to is neither a payroll doc number or a funds reservation/commitment document number (based on the document number range).
Has anyone seen this message before? Any thoughts?
Thanks in advance.
R

Dear colleague,
The reason could be:
In the variant for the data collection report
you use a data selection period , for example:
07/01/06 to 06/30/07
for method 'DAta from Payroll (PAYR)'
However, if the commitment interval is for example, 01/01/08 to 06/30/2008
Thats why no data are collected, and thats the reason for the message.
Please review the data selection period for the variant .
Let me know if this helps.
Regards, Noemí

Error message when trying to log with more than a mobile account

Hi guys,
I face a very strange and worrying problem : when I log with a mobile account against my Snow Leopard Server, it works. But when I try to log with a second mobile using fast user switching, I have a strange error message saying that I can't connect with this user "at the moment". Once I log off from the first mobile account, I can log with the second one...
It is as if it is not possible to have two or more mobile/network accounts logged simultaneously on the same client. Is this a known problem ?
Thanks for your help,
Eric.

By design or not, this is a flaw, and a huge one ! I wanted to set up my home network so that each member of my family has a portable account. But this stupid design decision makes it impossible, since it makes impossible to have two or more users logged at the same time on a computer. So each time a member of my family wants to log on the family iMac, they have first to ask the previous logged member to log out !
How is that not a flawed design ? I don't even see what are the pros of that design decision ?

BSI error message in US payroll log

Similar Messages

Maybe you are looking for