BSI Tax Factory 8.0 with 4.6C

Hi all,
Our client is in the process of implementing net payroll. We are on 4.6C During the process of implementation, BSI has released the new Tax Factory 8.0. BSI has announced that, they will stop support to Tax Factory 7.0 by the end of this year.
My question is does 4.6C supports Tax Factory 8.0. I am unable to get any clear information through OSS notes too. The OSS notes released in this regard is too vague and don't specifically mention the compatability.
If it's an upgrade from Tax Factory 7.0 to 8.0, SAP has given some pre-requisites to apply as patches, but if its a new installation of Tax Factory 8.0, SAP OSS note is silent on any service packs and applying patches to 4.6C. They have given information only for Enterprise versions 4.7 and above.
Does any one has any idea about this situation or any information of compatability of BSI Tax Factory 8.0 with 4.6C as a new installation.
I appreciate your time and look forward to get some help in this regard.
Thanks

Yes, BSI 8.0 is compatible with 4.6C
There is a note out there - 1022656.
You either go to HR SP C6 or implement the attachment within the note.

Similar Messages

BSI Tax Factory Upgrade

We are upgrading BSI Tax Factory from 8.0 to 9.0. Starting with BSI Tax Factory version 9.0 the standard schema no longer reads this parameter of the UPAR1 function. We have to define the BSI Tax Factory version in two Customizing activities,
Specify BSI Tax Factory version for customizing settings and Specify BSI Tax Factory version for master data and tax calculation. The second one is feature 10BSI and it looks like we have to maintain this feature when we use two versions of
SAP.We are planning to use only 9.0 after our upgrade and still we have to maintain this feature? In the first step specify tax factory version has start date and which date we have to enter ? start of the new payroll period and if we specify start of the
new payroll period when it retroes will it have a problem. Please explain whoever has done the upgrade.
Thanks for your help.

You should be fine leaving feature '10BSI' as is (return ' ' ) as it will then use BSI version defined in new config table. Retro back to period prior to BSI 90 upgrade should be OK as it will also uses BSI 90 engine (i.e. date in config table is compared with system current date, not payroll start / end date .

BSI Tax Factory upgrade from 9.0 to BSI 10D directly??

Hi Experts,
I know most of the BSI customers have upgraded from Tax Factory 9.0 to BSI Tax Factory 10.0 as BSI 9.0 support is going to be end of this November 30(2014)..We understand that there is new feature came up BSI 10.0 which is Browser based login to the BSI 10 which runs based Tomcat XML services which needs to be installed on the central windows server server and should be up and running for 24/7..which became a little budget issue for our cllient..
Client dont want go for buying new windows servers for installation of Tom cat services exclusively..Because of all these constraints we have decided to go to BSI 10D which is having GUI logon feature like BSI 9.0 intead of Tom cat xml services for browser based which is released on 26th July 2014..
So here My question is ..Is there a possibility to upgrade from 9.0 to 10d directly?? If yes what is the procedure to upgrade from BSI 9.0 to 10d..
Your inputs in this Upgrade can be really highly appreciated
Thanks
Naresh

Hi Naresh Gollapelly,
This is also helpful for you
SAP has released SAP Note 1875218, which contains the roadmap for BSI TaxFactory 10.0.
SAP has released the following Notes to allow for the integration of the Payroll U.S. solution with BSI TaxFactory 10.0:
SAP Note 1903607 (Phase 1 delivery)
SAP Note 1909014 (Phase 2 delivery)
SAP Note 1934840 (Phase 3 delivery)
SAP Note 1937142 (Nonresident Worked Days parameters)
Installation and Upgrade Notes
IMPORTANT: For customers with business in Puerto Rico we recommend to wait with an upgrade from BSI TaxFactory 9.0 to BSI TaxFactory 10.0 until cyclic 10.c is available. BSI is planning to release cyclic 10.c (Christmas Bonus) by end of February for certification. The certification will take around 15 days. After the successful certification, BSI will make the executables of BS TF 10.c available.
Regards,
Naresh.KM

BSI Tax Factory Upgrade:HR Support packs

Hi All,
We are starting with upgrade of BSI tax Factory from 8.0 to 9.0. And as per SAP main note '1469858' for upgrade, the support
pack required is 'HRSP61' but we currently have 'HRSP59'. Also, CLC 61 was applied for 2010 year end activities.
So, with CLC 61 present, would it be possible to upgrade to 9.0 without upgrading to HRSP 61 ?
In other words I want to confirm if CLC 61 includes the Tax Factory 9.0 updates.
Thanks,
Avinash

Hi Avinash,
I just updated relevant information for your query in the following thread:
[*BSI 8.0 becomes obsolete August 31st 2011, 9.0 troubleshooting guide here*;
Kind regards,
Felipe

BSI Tax Factory on ECC 6.0 Unicode

I'm looking for some help with using BSI Tax Factory on an ECC 6.0 Unicode System. Does anyone have any experience with using BSI Tax Factory on the Unicode version of ECC 6.0? Were there any special steps that were taken in order to make it work? I spoke with someone at BSI and they told me that Tax Factory was not Unicode compliant and that I should talk to someone at SAP to find out what steps needed to be done to make the system work. While I inquire further with both SAP and BSI I thought I would post something here as well to see if anyone could offer any assistance.
Thanks in Advance!
-Nick

Hi Nick,
BSI TaxFactory is not unicode complaint. But in the past we have had customers who converted from non-unicode to unicode and had no problems with BSI TaxFactory.
Export the BSI related data from the DB and import it back after the unicode conversion. And everything works fine!
Regards,
Tarun
SAP ERP HCM

BSI Tax Factory 10.0 upgrade

Hi Gurus,
We are in the process of upgrading BSI tax factory 10.0. Could you please let me know what should be the start date of changes in table VV_T5F99K2_US_BSITF for parameter BSITF

Hi Arun,
I would say you use same date already there and just replace V90 under value by V10 in your development system.
Run few tests for regular, retros, off-cycles with deductions/payments changes in past, generate claims, etc for different states, locals and compare same scenarios test results for V90 in your quality against V10 in development to see if functionality does not vary.
You can switch functionality from V10 to V90 in case there are too many differences in tax calculation at any time although there should not be issues as both would use check date to calculate taxes.
I would recommend you can look at discussion below for any queries on BSI TF10.
https://scn.sap.com/thread/3516971
Thanks,
Ameet

BSI Tax Factory Upgrade 8.0 to 9.0

Hi BSI,
We are upgrading our BSI tax Factory from 8.0 to 9.0. We are running:
Windows 2008 R2
SQL Server version 10.50.1777
I'm able to connect to the database using login TF90 through SQL Server Management Studio, the ODBC Data Source Administrator and the TaxFactory Client is connecting fine too.
But when running report RPUBTCU0 from the SAP system , its caught under ABAP dump-> SYSTEM FAILURE.
Looking at the error.txt.
=Running connect_db_taxfactory
BSI dataset -> 101
ConnectToDataSource... Starting
ConnectToDataSource...Succeeded
Connect to Dataset Error string = 101
ConnectToDataSet... Starting
ConnectToDataSet...failed
Error String -> 4020 - THERE IS NO VALID LICENSE INSTALLED FOR HOST HCA-MSAP68:UNKNOWN.
=RFC error
operation/code connect_db_payroll_tax_calc_us
key RFC_ERROR_SYSTEM_FAILURE
status
message See RFC trace file or SAP system log for more details
internal status .
The machine key is successfully installed.
Please guide what we are missing here.
Please contact me at +60123675076 (malaysia) at anytime.
Thanks.
Thava

We managed to solve this by changing tf90server.bat file.
from - I:
CD I:\BSI\Server9.0
tf90server.exe %*
To - I:\BSI\Server9.0\tf90server.exe %*
Now we could run report RPUBTCU0 without error.
Thanks.
Thava

BSI Tax Factory 10.0 - SP level

Hi All,
Is it a recommendation or requirement to be at SP 65 (6.04) to apply the notes for phases I, II, and III?
What is the difference between 'Base HR SP' and 'Synch. HR SP' ?
What SP is required for the new tool (sync payroll tax data)? We would rather not update to SP65, then a month later need to update to SP8x?.
Any help is appreciated. Thanks.
Brandyn

Hi Arun,
I would say you use same date already there and just replace V90 under value by V10 in your development system.
Run few tests for regular, retros, off-cycles with deductions/payments changes in past, generate claims, etc for different states, locals and compare same scenarios test results for V90 in your quality against V10 in development to see if functionality does not vary.
You can switch functionality from V10 to V90 in case there are too many differences in tax calculation at any time although there should not be issues as both would use check date to calculate taxes.
I would recommend you can look at discussion below for any queries on BSI TF10.
https://scn.sap.com/thread/3516971
Thanks,
Ameet

BSI Tax Factory 9.0 Upgrade

Can folks give me an idea what kind of timelines they are facing to upgrade from BSI 8.0 to 9.0 assuming HR SPs and TUBS required? I am trying to get a rough scope (weeks, months) for planning purposes.

Hello All
We are upgrading TaxFactory from 8 to 9 by following the SAP note 1469858.
when we run the report RPUBTCU0, SAP system is giving system failure error. We are in contact with BSI support but no use, as suggested by them we have changed the password of user ID (OS user) tf90 to password bsi and it did not work.
With our tf90 Os user ID and password abcdef, we are able to connect to tf90 database but when we run report RPUBTCU0, it is throwing system failure dump.
Please advice on the below error message.
Thanks
Hinge
     db2 connect to TF90 user tf90 using abcdef
   Database Connection Information
Database server        = DB2/AIX64 9.1.2
SQL authorization ID   = TF90
Local database alias   = TF90
      tf90lic -i tf90license.txt
ConnectToDataSource() failed: 7777 - [IBM][CLI Driver] SQL30082N Security processing failed with reason "3" ("PASSWORD MISSING"). SQLSTATE=08001
      more tf90server.csh
#!/bin/csh
#tf90server.csh: Set execution environment for SAP TaxFactory 9.0
Set your DB2/UDB environment variables
Remember to grant database rights to the user invoking this
setenv DB2INSTANCE db2sid     #Replace with your DB2 unix instance owner
setenv DB2DBDFT    TF90       #Replace with your DB2 Database Name
setenv DATABASE    TF90       #Replace with your DB2 Database Name
setenv DB2USER     tf90       #Replace with your DB2 User ID
setenv PASSWD      abcdef #Replace with your DB2 Password
Change directory to the TaxFactory Server Directory
Set the TaxFactory Default Database connection
cd /sapmnt/SID/exe
For SAP Trace Debugging, Uncomment Below & Refer to /tmp/error.txt
./tf90server $1 $2 $3 -o /tmp/error.txt
log of /tmp/error.txt:
=Running function srv_payroll_tax_calc_us_90
=Loading import parameters
=Loading export parameters
=Loading internal tables
=Calling payroll_tax_calc_us
=Running connect_db_taxfactory
BSI dataset                  -> 030
ConnectToDataSource... Starting
ConnectToDataSource...failed
Error String -> 7777 - [IBM][CLI Driver] SQL30082N Security processing failed with reason "24" ("USERNAME AND/OR PASSWORD INVALID"
). SQLSTATE=08001
=RFC error
operation/code connect_db_payroll_tax_calc_us
key rfc system error raised
status
message for more information: see tracefile dev_rfc
internal status
dev_rfc log file:
Trace file opened at 20110314 085512 EDT SAP-REL 640,0,162 RFC-VER 3 878571
======> CPIC-CALL: 'CMACCP'
LOCATION    SAP-Gateway on host xxxxxx / sapgw03
ERROR       Conversation 88399050 not found
TIME        Mon Mar 14 08:55:12 2011
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          728
MODULE      gwxxrd.c
LINE        6254
COUNTER     3664

BSI Tax Factory 10.0

I have completely installed BSI TF10.0.d and have begun testing in my development system attempting to use the 'Switch Concept' as outlined in SAP note 1519016. Up until this version, it has always worked fine. Now, the only version referenced in the log from my payroll simulation is TF9.0.j update level 146. Has there been any change that disabled this functionality? Am I missing something?
Best regards,
Michael

Where did you install Tf10? Stand alone server? Work station?

G/L account item without tax code in document with deferred taxes

Hi ,
While releasing the billing document to accounting i get this error " G/L account item without tax code in document with deferred taxes". Not able to release it to accounts. What could be the possible reason??
Actually, this error is occuring only when i am using a Discount Condition (Z Condition).
Please guide what could be the problem in the Discount Condition?
Thanks and Best Regards

whats this Z condition type. Is it a tax condition type. If yes , please check the tax code assigned to this in the condition type defintion (VK12) and in FTXP check if this code is assigned with Account key.
Also in the pricing procedure, if this condition is Active (not statistical) whats the account key assigned to it. Then check whats the GL Account assigned to this Account key (VKOA).
Then in FS03 , check this GL account number and under "Control Data" whats the Tax category maintained. You can have a * for the tax category here.
Hope this helps
Regards
Sai

I have apple 3gs factory unlocked running with ios 4.1 Can i update it to 5.1.1 how to update it? do i need to unlock again if updated

I have apple 3gs factory unlocked running with ios 4.1. Can i update it to 5.1.1 how to update it? do i need to unlock again if updated?

Download the current version of itunes, attach your device to your computer, open itunes, go to the device (upper right hand corner) and select update. It'll update to iOS 6.0.2, the current version of iOS.

Retrieving the COM class factory for component with CLSID {85DE1C45-2C66-101B-B02E-04021C009402} fai

I get the following error when i try and access a site I'm working on through internet explorer, but it works fine when i run it in the visual studio 2005 environment. (I'm trying to complete a pdf with form fields) ====== Retrieving the COM class factory for component with CLSID {85DE1C45-2C66-101B-B02E-04021C009402} failed due to the following error: 80070005. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Retrieving the COM class factory for component with CLSID {85DE1C45-2C66-101B-B02E-04021C009402} failed due to the following error: 80070005. ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via <identity impersonate="true"/>, the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access. ====== // Initialize Acrobat by creating App object. CAcroApp acroApp = new AcroAppClass(); //<- Break happens here // Create an AVDoc object CAcroAVDoc avDoc = new AcroAVDocClass(); Does anyone know of a way to solve this? I'm trying to swap over from iTextSharp to the actual adobe sdk, as I've had some bugs with iText.

A lot to try and cover here.
>I saw that the one pdf was created in Adobe Designer 7.1 and the other in Amgraf OneForm Designer Plus.
Ok, we can only say anything about the first one. But you must find
out what kind of form it is if you want to work with it
programmatically: they are utterly unlike each other.
You cannot use FDF format with an a form made with Designer (also
called an XFA form or XML form). But you can import an XML file in
Acrobat.
>
>Based on the second part of your reply i'm assuming the way i'm currently passing the data to the pdf is the reason i get the following message
>
>"This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available"
No, completely different issue. This file has been prepared specially
so it can be saved in Adobe Reader. Any change to the file will break
this. The only exception is Acrobat, which you cannot use.
No third party product can repair this, but Adobe's server product
LiveCycle Reader Extensions can put back the rights. You might use
this in conjunction with LiveCycle Forms.
Aandi Inston

Retrieving the COM class factory for component with CLSID {0002DF01-0000-0000-C000-000000000046} error: 80070005

Hey guys,
I've used xp_cmdpowershell from SQL Server 2008 R2 to execute a powershell scripts.
One of this scripts creates a internetexplorer.application object.
When I execute this script on powershell(version 2.0), it runs.
But when trie to execute for xp_cmdpowershell it fails.
error output:
Retrieving the COM class factory for component with CLSID {0002DF01-0000-0000-C000-000000000046} error: 80070005
script example:
$ie = New-object -com 'internetexplorer.application'
$ie.navigate("http://www.google.com")
$ie.visible = 1
sleep -s 10
$ie.quit()
xp_cmdpowershell example:
EXEC master..xp_cmdshell 'powershell C:\DataLocalTopRonda\scr.ps1';
Anyone have any ideas? Any help will be appreciated.

8007005 is typically 'Access Denied'. Did you verify DCOM permissions to this class object? Are you using the same credentials in the PowerShell console as what is being done in SQL?
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

"Retrieve the COM class factory from component with CLSID {623F456-...etc}

When i try to run on Window server 2008 R2 it gives following error
"Retrieve the COM class factory from component with CLSID {623F456-...etc} failed due to the followi
i developed application in xp it run fine

Hi
When you make an ard select the target CPU x86 rather then any CPU in advanced compile options(Properties-> Compile-> Advance Compile Options)
hope it helps
Regards
Rupinder

BSI Tax Factory 8.0 with 4.6C

Similar Messages

Maybe you are looking for