BSI upgradation and customer version schema UTX0/UTAC

Hi All,
In upgrading of BSI notes 1022656 describes all steps and in 9 th step it is given as modify customer version schema UTX0/UTAC.
What exactly to be done there.
Please can any one answer this que?
Regards
Senthil

UTX0 is tax sub-schema for US , and UTAC is tax sub-schema for US using concurrent employment (you only use this if your company is implementing concurrent emp).
All you have to do is to go to either one of these schema (again, depending on whether you use concurr. emp or not) or equivalent custom sub-schema and change line 'UPAR1 BSI 70' to 'UPAR1 BSI 80'.
Rgds.

Similar Messages

  • I have an early MiniMac with OS X 10.4.11.  Can I get a free OS upgrade and which version should I choose?  Do I just download and over ride the current OS system or what?

    I have an early MiniMac with OS X 10.4.11.  Can I get a free OS upgrade and which version should I choose?  Do I just download and over ride the current OS system or what?

    First what model Mini do you have? That will determine how high y can go.
    How to identify Mac mini models
    In any event you will have to pay

  • CS4 Upgrade and Previous Versions of Photoshop

    As a long-time Photoshop user, I have upgraded my versions of Photoshop over the years and currently have the CS4 Photoshop Upgrade loaded on my computer.  I have an older computer with limited hard drive space and am running out of room.  Is it necessary to keep all the previous versions of Photoshop on my computer's hard drive in order for the already-loaded on my computer CS4 Photoshop Upgrade to run?  In other words, can I remove the earlier versions (like Photoshop 4, Photoshop 6 Upgrade, Photoshop 7 Upgrade, and CS2 Photoshop Upgrade) and still have CS4 Photoshop Upgrade run ok?  I'm trying to clean up hard drive space and would like to make space by deleting the previous versions, but I don't want to mess up my CS4 Photoshop Upgrade if that program somehow ties into components from the previous upgrades.
    Any help would be appreciated.  Thanks.

    Thanks for the response.  I currently have CS4 Photoshop Upgrade version already on my computer.  In addition to that, I also have on it Photoshop 4.0, Photoshop 5.5, Photoshop 6.0 Upgrade version, Photoshop 7.0 Upgrade version, and CS2 Photoshop Upgrade.  What I need to know is can I remove the earlier versions of Photoshop or will it negatively affect the operation of CS4 Photoshop Upgrade (since it's not the full version and only an upgrade of the upgrades installed earlier)?  (The only full version of Photoshop I have is Photoshop 4.0 -- everything after that was upgrade versions.)

  • Architecture for base Product and customized versions of product

    Hello
    We have a product written in Flex.
    We have several customers who have this product. The product is customized to each customer.  When starting a new project, we copy the project of a customer who had similar requirements, and then make further changes.
    We have this idea to have a base product layer and then have a customization layer where we can place project and customer-specific fuctionalities.   Also:  when we update the base product, these updates can be incorporated into the customized versions.
    I wonder how can you accomplish this in Flex?
    Thank you,
    Juan Esteban

    Developing a good plug-in architecture is *hard*.However, it's definitely worth it. The best approach will depend on exactly what you want to do. At the high level, you can:
    1. Write the base application and load plug-in modules, and allow them to changes aspects of the application behavior or style
    2. Turn your base application into a core application logic library and a (separate) custom component library, and turn each customer implementation into a new project that leverages these.
    If you use dependency injection (e.g., SmartyPants or SwiftSuspenders), you can allow (1) a fairly flexible manner of interacting with the application without depending on gynormous "context" objects. You just need to perform injections on the loaded plugins, and they can pick up any dependencies without having to worry about anything else.
    Whether (1) or (2) makes more sense will depend on exactly what you're trying to do, but in general, (2) is more flexible while (1) is somewhat simpler (and generally less per-implementation work).

  • Snowleopard upgrade and full version

    I have macbook with leopard. I want to upgrade it into snowleopard. But I found 2 types of dvd, upgrade version and full version. What is the differences and advantages between full and upgrade? If I buy the full version, could I install it in my mac(leopard)? Because I found more easily the mac box set (full version) that is cheap.
    Thanks

    The 10.6.3 white retail disk (so called "upgrade disk") sold online at Apple are full version disk of OS X Snow Leopard, however it also has a upgrade installer for OS X versions 10.4 and 10.5.
    So if you boot the Mac into 10.4/10.5 and stick the DVD in and double click the upgrader, it will replace 10.4/10.5 with 10.6.3 and leave your programs and files alone.
    If you stick the same disk in and boot the machine while holding c or option/alt key down (wired/built in keyboard) you get the opportunity to use Disk Utility (and others) and can erase the entire drive and then install OS X 10.6.3 Snow Leopard fresh. However this disk is sans-free iLife, but can be reinstalled via the 10.5 machine disks.
    I don't know the specifics of the full version of the Snow Leopard install disks as I never used them, or what particular advantage they have (free iLife?), but if it requires a erase and install, then that's a disadvantage obviously as you can't carry over your already installed 10.5 programs.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    How to erase and install Snow Leopard 10.6
    Restoring your Free iLife (iPhoto, iMovie etc)

  • Upgrade and old version are both on my mac?

    So, am I supposed to have both the CS4 and Cs6 on my mac after the install?  Is that to continue to support any thing that I created in Cs4? Or did it download incorrectly? How do I fix this?

    Upgrades do not replace the version that they ipgrade.  Upgrades are independent installations such that you can retain use of both the original and the new versions.  If you prefer to get rid of the old version, it is best to do so before you install the upgrade version.  YOu do not need the original to nstall the upgrade, you only need its serial number.

  • R2 upgrade and custome boot images

    Hi Guys
    What happens to the custom boot images after the upgrade to R2 from SP1? There are some boot images customised to be able to connect to 802.1x secured wired network and I was wondering what will happen to them after upgrade?

    They're not gone after the upgrade so there's nothing to re-import thus yes you can still use them although boot images based on WinPE 4.0 are not technically supported in R2 (though they should work). You won't be able to add drivers to them or
    maintain them in the console either. You should put in the effort to customize WinPE 5.0 based boot images for the long run though.
    Also note that Win8 won't be supported anymore after October of this year (http://support.microsoft.com/lifecycle/search/default.aspx?alpha=Windows+8&Filter=FilterNO&wa=wsignin1.0) so
    you should plan to move to Win 8.1 Update ASAP for your deployments.
    Jason | http://blog.configmgrftw.com

  • ASA upgrades and skipping versions

    Hi,
    Aside from all of the normal 8.2 to 8.3 (and above) upgrade issues/concerns that are completely documented elsewhere, I'm wondering if anyone has seen the same issues I have had upgrading ASAs from 8.2(x) to anything above 8.4(x)?
    The problems below seemed to caused by skipping versions or at least I thought these particular issues were avoided when I did not skip upgrade versions
    adding unidirectional nat leaving off nat route lookupadding nat (inside,any) 
    Is there a way to avoid these issues when skipping upgrade versions?
    Appeciate your input.
    Thanks.

    A boxed version will have upgrades to fix problems, but will not have upgrades to include new features that come out.  They will be introduced with the next boxed (perpetual licence) version.  In the past this has been about every 1.5 years.
    What will happen to the perpetual licence in the future is anybodys guess.  Companies perfer the monthly cloud subscription as it generates a steady stream of income, at higher rates.  The enticement is you get new features as they come out.  Consumers balk at the cloud subscription as once you stop the subscription you have nothing.

  • Upgrade and old version.

    hello, I have two questions, the first is: when I install a new version I have to uninstall the previous one? The second is: can I install the old version on another pc? Thank You.

    Yes, to both. Be sure to deactivate the old version before uninstalling, if necessary.

  • What is "custom version" firmware on unbranded, un...

    I live in the U.S. and recently purchased from Dell.com a new black E72 (RM-529). According to Device Manager, it is a Model E72-2, with "Software version" 022.007, Software version date 10-Dec-2009, and "Custom version" 022.007.244.02, Custom version date 13-Jan-2010. My question is, what is "Custom version" firmware in this case? It is new, just out of the sealed box.

    It lists a "custom version" for every device, whether it's got the generic software or not. Presumably 244.02 is just the current version for the generic software.
    Help I'm trapped in a sig factory.

  • Problems with iPhoto lib after mavericks upgradening iPhoto says upgrade and pref lib will be unreadable after lib upgrade.  Help-don't want to lose all prev pictures in lib.

    After upgrade, attempted to open iPhoto to upload pictures from camera.  Message says need to upgrade library and that after upgrade previous library will be unreadable.   In holding pattern for now-don't want to lose all 4K prev pictures in iphoto library.  Anyone have same or similar problem?

    gotitans, I think you have an entirely different problem than we are discussing in this thread.
    You should open your own thread, and you should describe your problems in more detail. For example, what type of Mac do you have, what operating system does it run, what version of iPhoto did you have running before the upgrade,and just what sort of upgrade did you do (hardware, operating system, iPhoto, something else)?
    My best guess from just that message is that you did a hardware upgrade, and your version of iPhoto is too old to run on the new hardware.
    ntgerh64, it would probably be good if you gave us the same details I asked of gotitans. I was assuming you were talking about upgrading OS X to Mavericks and then iPhoto to 9.5 or 9.5.1.

  • JPS-00080: Credential store schema version 12.1.2.0.0 is less than the latest schema version 12.1.3.0.0, upgrade the Credential store schema to latest version.

    JPS-00080: Credential store schema version 12.1.2.0.0 is less than the latest schema version 12.1.3.0.0, upgrade the Credential store schema to latest version.
    Hi All,
    When trying to extend my domain, it fails with above error.
    any suggestions on fix?
    is this related to Fusion Infrastructure ADF RCU utility?
    thanks

    Hi JCGO,
    The Schema installed on your DB is 12.1.2.0.0 but the Domain Extension requires 12.1.3.0.0.
    One solution is to run the 12.1.3.0.0 RCU,  drop the existing schema on your DB, followed by installation 12.1.3.0.0 schema on the DB, so that the Domain extension gets the 12.1.3.0.0 schema
    One more solution is to open the template on which you are extending the domain. The templates are present in ${MW_HOME}/oracle_common/common/templates/wls , explore to the required configuration inside yourtemplate.jar and comment out the Credential store schema version pre-requisite. This is not a good approach, but still it'll be a good workaround since 12.1.2.0.0 and 12.1.3.0.0 schema wont have much difference.
    Thanks,
    Shiva Shankar  B N

  • Upgraded to Reader version 11.0.10, now I can not fill out a form and save as same file

    I used to be able to open a template pdf file and then fill out form fields (ie customer address, etc.), then save the pdf file to the same name.  After upgrading to version 11.0.10, the reader gives an error that I need to change the name or folder.  Any suggestions  on how to get around this?  Still works with Acrobat XI Pro on this computer, and Reader version 11.0.0 on another computer.  I can't change the name or save to a different folder because the pdf file is attached to a customer in a database program.

    Make sure the Preview panel in Windows Explorer is disabled.

  • Someone help me I still have iPhone 3 and I can't download anything like my slotmania it let me download later version but keeps asking for me to upgrade and trying to figure out why it keeps doing that when I have already got downloaded but won't let me

    Someone please help me I have an iPhone 3GS version 4.2.1 8c148a and I downloaded slotmania this morning and it won't let me play it keeps asking if I want to upgrade and I can't upgrade because phone won't let me so I'm wanting to play my game I use to could play it and farmville but for some reason it won't let me play .... Can someone help me figure out something because I'm sure their is a way I can and husband won't upgrade me and I got free upgrade and can't even get because he's cheap it's sad Hugh

    What iPhone do you have? You can check in settings>>general>> about.
    If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
    If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears.

  • I did an upgrade from 4.0 to the new 6.0 about 5 months ago. After the upgrade installed it said reboot system to apply upgrade. Now it wont open and keeps telling me that the older version needs to shut down the computer and upgrade the old version.

    Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

    Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

Maybe you are looking for